Resin and loading condition screening for effective and robust byproducts removal by anion exchange chromatography: A case study.

In downstream processing of protein therapeutics, ion exchange (IEX) chromatography is a powerful tool for removing byproducts whose isoelectric point (pI) is appreciably different from that of the product. Although in theory for a given case cation exchange (CEX) and anion exchange (AEX) chromatography should be equally effective for separation, in reality they may show different effectiveness. In the current work, with a case study, we demonstrated that AEX is more effective than CEX chromatography at removing the associated byproducts. In addition, we screened AEX resins and loading conditions to achieve best separation. Finally, we demonstrated that effective separation was achieved with the selected resin/condition, and chromatography performance was comparable between runs conducted at low and high load densities, suggesting that the developed process was relatively robust. The procedure described in this work can be used as a general approach for selecting resin and loading condition that allow for effective and robust removal of byproduct that binds weaker than the product to the selected type of column.

Partition coefficient screening - An effective approach for finding the best conditions for byproduct removal as demonstrated by a bispecific antibody purification case.

In recombinant protein purification, differences in isoelectric point (pI)/surface charge and hydrophobicity between the product and byproducts generally form the basis for separation. For bispecific antibodies (bsAbs), in many cases the physicochemical difference between product and byproducts is subtle, making byproduct removal considerably challenging. In a previous report, with a bsAb case study, we showed that partition coefficient (Kp) screening for the product and byproducts under various conditions facilitated finding conditions under which effective separation of two difficult-to-remove byproducts was achieved by anion exchange (AEX) chromatography. In the current work, as a follow-up study, we demonstrated that the same approach enabled identification of conditions allowing equally good byproduct removal by mixed-mode chromatography with remarkably improved yield. Results from the current and previous studies proved that separation factor determination based on Kp screening for product and byproduct is an effective approach for finding conditions enabling efficient and maximum byproduct removal, especially in challenging cases.

Large-scale isolation and crystallization of epothilone D from Myxococcus xanthus cultures.

The introduction of the epothilone polyketide synthase (PKS) into Myxococcus xanthus has enabled the heterologous production of epothilone D (1) on a large scale. To isolate this valuable product from the fermentation medium, an economical, scalable, and high-yielding purification process was developed. With the crystallization of 1 from a binary solvent system that consisted of ethanol and water, the product was recovered as white crystals with a final purity of > or =97% (w/w). This is the first reported crystallization of 1.