In situ growth of corrosion resistant Mg-Fe layered double hydroxide film on Q235 steel.

HYPOTHESIS: In situ grown layered double hydroxide (LDH) is commonly used one of the anticorrosion ways for metal materials; Due to the dense growth of LDH on the metal surface, its special layered structure can effectively delay the corrosion rate of metal. METHODS: In this study, we use a hydrothermal method to successfully grow Mg-Fe LDH film on steel substrates based on self-supplied Fe3+ ions. The films were characterized by X-ray diffraction, scanning electron microscopy, and X-ray energy dispersive spectrometry. The potential corrosion resistance of the obtained Mg-Fe LDH film was confirmed using electrochemical impedance spectroscopy and polarization curves. FINDINGS: After systematic adjustment and parameter optimization, it was found that Mg-Fe LDH film exhibited the best growth morphology and comprehensive performance with an initial pH value of 10, Mg2+/urea ratio of 1:4 and reaction time of 12 h. The SEM and electrochemical results further demonstrated that Mg-Fe LDH film play a good protection effect on carbon steel surface. This study provides an important reference for the processing of anticorrosion LDHs film.

Retrorectal mucinous adenocarcinoma arising from a tailgut cyst: A case report and review of literature.

BACKGROUND: Tailgut cysts are defined as congenital cysts that develop in the rectosacral space from the residue of the primitive tail. As a congenital disease, caudal cysts are very rare, and their canceration is even rarer, which makes the disease prone to misdiagnosis and delayed treatment. We describe a case of caudal cyst with adenocarcinogenesis and summarize in detail the characteristics of cases with analytical value reported since 1990. CASE SUMMARY: A 35-year-old woman found a mass in her lower abdomen 2 mo ago. She was asymptomatic at that time and was not treated because of the coronavirus disease 2019 pandemic. Two weeks ago, the patient developed abdominal distension and right waist discomfort and came to our hospital. Except for the high level of serum carcinoembryonic antigen, the medical history and laboratory tests were not remarkable. Magnetic resonance imaging showed a well-defined, slightly lobulated cystic-solid mass with a straight diameter of approximately 10 cm × 9 cm in the presacral space, slightly high signal intensity on T2-weighted imaging, and moderate signal intensity on T1-weighted imaging. The mass was completely removed by laparoscopic surgery. Histopathological examination showed that the lesion was an intestinal mucinous adenocarcinoma, and the multidisciplinary team decided to implement postoperative chemotherapy. The patient recovered well, the tumor marker levels returned to normal, and tumor-free survival has been achieved thus far. CONCLUSION: The case and literature summary can help clinicians and researchers develop appropriate examination and therapeutic methods for diagnosis and treatment of this rare disease.

Stabilisation/solidification of municipal solid waste incineration fly ash by phosphate-enhanced calcium aluminate cement.

Landfill disposal of municipal solid waste incineration fly ash (MIFA) presents significant environmental and economic burden. This study proposed a novel and high-efficiency approach for stabilisation/solidification (S/S) of MIFA by phosphate-modified calcium aluminate cement (CAC). Experimental results showed that the presence of Pb (the most leachable metal contaminant in the MIFA) retarded the early-stage reaction of CAC, resulting in an extension of setting time and a significant decline of compressive strength of CAC pastes. The incorporation of phosphate additives (10 wt% of binder), especially for trisodium phosphate, in CAC system effectively mitigated the negative impact of Pb on the CAC reaction and reduced the Pb leachability. Elemental mapping results illustrated that Pb2+ coordinated with phosphate to generate insoluble precipitates (e.g., Pb3(PO4)2). The S/S treated MIFA samples fulfilled the compressive strength and leachability requirements for on-site reuse. Overall, this study demonstrated that phosphate-modified CAC is a promising binder for S/S of hazardous MIFA.

Influence of lead on stabilization/solidification by ordinary Portland cement and magnesium phosphate cement.

Inorganic binder-based stabilization/solidification (S/S) of Pb-contaminated soil is a commonly used remediation approach. This paper investigates the influences of soluble Pb species on the hydration process of two types of inorganic binders: ordinary Portland cement (OPC) and magnesium potassium phosphate cement (MKPC). The environmental leachability, compressive strength, and setting time of the cement products are assessed as the primary performance indicators. The mechanisms of Pb involved in the hydration process are analyzed through X-ray diffraction (XRD), hydration heat evolution, and thermogravimetric analyses. Results show that the presence of Pb imposes adverse impact on the compressive strength (decreased by 30.4%) and the final setting time (prolonged by 334.7%) of OPC, but it exerts much less influence on those of MKPC. The reduced strength and delayed setting are attributed to the retarded hydration reaction rate of OPC during the induction period. These results suggest that the OPC-based S/S of soluble Pb mainly depends on physical encapsulation by calcium-silicate-hydrate (CSH) gels. In contrast, in case of MKPC-based S/S process, chemical stabilization with residual phosphate (pyromorphite and lead phosphate precipitation) and physical fixation of cementitious struvite-K are the major mechanisms. Therefore, MKPC is a more efficient and chemically stable inorganic binder for the Pb S/S process.