Logic Signal Amplification System for Sensitive Electrochemiluminescence Detection and Subtype Identification of Cancer Cells.

Achieving sensitive detection and accurate identification of cancer cells is vital for diagnosing and treating the disease. Here, we developed a logic signal amplification system using DNA tetrahedron-mediated three-dimensional (3D) DNA nanonetworks for sensitive electrochemiluminescence (ECL) detection and subtype identification of cancer cells. Specially designed hairpins were integrated into DNA tetrahedral nanostructures (DTNs) to perform a catalytic hairpin assembly (CHA) reaction in the presence of target microRNA, forming hyperbranched 3D nanonetworks. Benefiting from the "spatial confinement effect," the DNA tetrahedron-mediated catalytic hairpin assembly (DTCHA) reaction displayed significantly faster kinetics and greater cycle conversion efficiency than traditional CHA. The resulting 3D nanonetworks could load a large amount of Ru(phen)32+, significantly enhancing its ECL signal, and exhibit detection limits for both miR-21 and miR-141 at the femtomolar level. The biosensor based on modular logic gates facilitated the distinction and quantification of cancer cells and normal cells based on miR-21 levels, combined with miR-141 levels, to further identify different subtypes of breast cancer cells. Overall, this study provides potential applications in miRNA-related clinical diagnostics.

Interfacial Hydrogen-Bond Interactions Driven Assembly toward Polychromatic Copper Nanoclusters.

Constructing versatile metal nanoclusters (NCs) assemblies through noncovalent weak interactions between inter-ligands is a long-standing challenge in interfacial chemistry, while compelling interfacial hydrogen-bond-driven metal NCs assemblies remain unexplored so far. Here, the study reports an amination-ligand o-phenylenediamine-coordinated copper NCs (CuNCs), demonstrating the impact of interfacial hydrogen-bonds (IHBs) motifs on the luminescent behaviors of metal NCs as the alteration of protic solvent. Experimental results supported by theoretical calculation unveil that the flexibility of interfacial ligand and the distance of cuprophilic CuI···CuI interaction between intra-/inter-NCs can be tailored by manipulating the cooperation between the diverse IHBs motifs reconstruction, therewith the IHBs-modulated fundamental structure-property relationships are established. Importantly, by utilizing the IHBs-mediated optical polychromatism of aminated CuNCs, portable visualization of humidity sensing test-strips with fast response is successfully manufactured. This work not only provides further insights into exploring the interfacial chemistry of NCs based on inter-ligands hydrogen-bond interactions, but also offers a new opportunity to expand the practical application for optical sensing of metal NCs.

Rh(III)-Catalyzed C-H Allylation of Aromatic Ketoximes with Vinylaziridines.

The Rh(III)-catalyzed reaction of aromatic ketoximes with 2-vinylaziridines affords ortho-allylation products of the phenyl rings of aromatic ketoximes in moderate to excellent yields. The reaction requires 0.5 equiv of NaOAc as a base and occurs under mild conditions. The protocol exhibits ortho-monoallylation selectivity, wide scope of substrates, and good compatibility of functional groups.

Palladium-Catalyzed Reaction of Indolines with Dihydropyrroles: Access to N-Alkylated Indoles.

Palladium-catalyzed reaction of indolines with 1-acyl-2,3-dihydro-1H-pyrroles or 1-acyl-2,5-dihydro-1H-pyrroles in air produces N-alkylated indoles. A combination of Pd(CH3CN)2Cl2 and dppf effectively catalyzes the reaction of 1-acyl-2,3-dihydro-1H-pyrroles, and the combination of Pd(CH3CN)2Cl2 and dcypf is more effective for the reaction of 1-acyl-2,5-dihydro-1H-pyrroles. The method has a wide scope of substrates and shows good compatibility of functional groups.

Preparation and utilization of carbon dots as a nanoprobe for sensitive detection of tartrazine and palladium (II).

We prepared novel green, eco-friendly carbon dots as a dual-channel probe for highly sensitive and selective detection of tartrazine (Trz) and palladium(II) (Pd(II)) involving, respectively, FRET and electron transfer mechanisms. Furthermore, the successful utilization of the carbon dots for detecting Trz and Pd(II) in actual samples implies its potential application prospects in analysis.

Selective identification of p-nitroaniline by bromine-mediated polarization of carbon dots.

A fluorometric method based on boron, bromide-codoped carbon dots (BBCNs) was developed for the first time for the highly selective detection of p-nitroaniline (PNA) in wastewater samples. It should be noted that the introduction of bromine greatly increases the molecular polarizability of the probe, which can regulate the energy level matching between the probe and PNA, resulting in the interaction between BBCNs and PNA. In the presence of PNA, the fluorescence of BBCNs is obviously quenched and accompanied by a red shift of the fluorescence band, which might be attributed to the formation of aggregates caused by the polar adsorption of BBCNs and PNA. It is beneficial for constructing a highly selective sensing platform for PNA determination compared to its isomers (o-nitroaniline and m-nitroaniline) through atomic bromine-mediated polarization of the BBCNs. With the help of this mechanism, an excellent linear range of 0.5-300 µM with a low detection limit of 0.24 µM toward PNA was obtained. This work further confirms that there is a significant relationship between the nature of doping elements and the optical and physicochemical properties of fluorescent materials.

Ruthenium-catalyzed C-H functionalization of indoles and indolines with 7-azabenzonorbornadienes: access to aminodihydronaphthyl indoles and indolines.

Indoles, indolines and hydronaphthylamines are ubiquitous structural motifs in natural products, pharmaceuticals, and biologically active molecules. In this paper, we report the synthesis of aminodihydronaphthyl-substituted indoles and indolines via a Ru-catalyzed carbamoyl-directed C-H functionalization of indoles and indolines with 7-azabenzonorbornadienes. In the presence of Cu(OAc)2 and AgSbF6, [Ru(p-cymene)Cl2]2 catalyzes the reaction of 1-carbamoylindoles with 7-azabenzonorbornadienes to produce 2-(1-amino-1,2-dihydronaphthalen-2-yl)indoles. Under the same conditions, the reaction of 1-carbamoylindolines with 7-azabenzonorbornadienes affords 7-(1-amino-1,2-dihydronaphthalen-2-yl)indolines. In both cases, the reactions yield cis-configured products.

Large Piezoelectric Response in a Metal-Free Three-Dimensional Perovskite Ferroelectric.

Metal-free perovskites with light weight and eco-friendly processability have received great interest in recent years due to their superior physical features in ferroelectrics, X-ray detection, and optoelectronics. The famous metal-free perovskite ferroelectric MDABCO-NH4-I3 (MDABCO = N-methyl-N'-diazabicyclo[2.2.2]octonium) has been demonstrated to exhibit excellent ferroelectricity comparable to that of inorganic ceramic ferroelectric BaTiO3, such as large spontaneous polarization and high Curie temperature (Ye et al. Science 2018, 361, 151). However, piezoelectricity as a vitally important index is far from enough in the metal-free perovskite family. Here, we report the discovery of large piezoelectric response in a new metal-free three-dimensional perovskite ferroelectric NDABCO-NH4-Br3 (NDABCO = N-amino-N'-diazabicyclo[2.2.2]octonium) by replacing the methyl group of MDABCO with the amino group. Besides the evident ferroelectricity, strikingly, NDABCO-NH4-Br3 shows a large d33 of 63 pC/N more than 4 times that of MDABCO-NH4-I3 (14 pC/N). The d33 value is also strongly supported by the computational study. To the best of our knowledge, such a large d33 value ranks the highest among the documented organic ferroelectric crystals to date and represents a major breakthrough in metal-free perovskite ferroelectrics. Combined with decent mechanical properties, NDABCO-NH4-Br3 is expected to be a competitive candidate for medical, biomechanical, wearable, and body-compatible ferroelectric devices.

Ruthenium(II)-Catalyzed S(II)-Directed Aromatic C-H Allylation with Vinylaziridines.

The ruthenium-catalyzed reaction of aryl methyl thioethers with vinylaziridines affords ortho-position mono- or bis-allylation products depending on substituents on the phenyl rings of sulfide substrates or the ratio of reactants. The reaction also features mild reaction conditions, good product yields, wide scope of substrates, good compatibility of functional groups, and the selective formation of E-configurated C-C double bonds.

An eco-friendly fluorometric assay for high-sensitive meloxicam quantitation in biological matrices.

Meloxicam (Mel), as a powerful and effective anti-inflammatory drug, is commonly employed for the treatment of various inflammatory diseases; however, the use of Mel at high doses or for extended periods could cause severe side effects in human visceral organs. Therefore, a simple, rapid, and reliable method is urgently needed to monitor Mel in biological samples. Herein, novel water-soluble luminescent nano-carbon dots (nano-Cdots) with outstanding physicochemical properties were prepared by a one-pot high-temperature hydrothermal process of ellagic acid and guanidine. The nano-Cdots were further used as an optical probe for the sensitive detection of Mel in serum samples through the cooperative mechanisms of the inner filter effect and photoelectron transfer. By employing this sensor, an excellent linear correlation was achieved between the relative luminescent intensity [(PL0 - PL)/PL0] and the concentration of Mel in the range of 0.1 to 200 µM, with a limit of detection of 34.68 nM (3σ/k). This sensor was effectively employed for the analysis of Mel in real serum samples, implying its potential development prospects for the advancement of drug analysis with carbon-based probes.

Large Phase-Transition Temperature Enhancement Achieved in a Layered Lead Iodide Hybrid Crystal by H/F Substitution.

Organic-inorganic hybrid metal halides with structural flexibility and solution processability have been widely investigated for different application scenarios. However, the effective construction of phase-transition materials with a high phase-transition temperature (Ttr) for potential practical applications remains a great challenge, and reports on the regulation of Ttr with significant enhancement have been rare. In this manuscript, we have realized a large Ttr increase of 148 K in a layered hybrid lead iodide crystal (4-FTMBA)4Pb3I10 (4-FTMBA = 4-fluoro-N,N,N-trimethylbenzenaminium) by the H/F substitution strategy. Compared to the parent (TMBA)4Pb3I10 (TMBA = N,N,N-trimethylbenzenaminium), H/F substitution preserves the structural framework and crystal symmetry in (4-FTMBA)4Pb3I10. The introduction of heavier fluorine will significantly increase the motion barrier for the order-disorder transition, resulting in the remarkably improved Ttr. Temperature-dependent crystal structures, Raman spectra, and dielectric analyses well support the phase-transition behavior. In addition, evident thermochromism with a tunable direct band gap in (4-FTMBA)4Pb3I10 has been observed using UV-vis spectra. To the best of our knowledge, the achieved Ttr enhancement of 148 K by H/F substitution is the highest among the organic-inorganic hybrid lead halide phase-transition materials. This finding would greatly inspire the rational design of functional materials with high performance.

Nickel-catalyzed reductive coupling of arylcarboxylic acid 2-pyridyl esters with alkyl methanesulfonates: access to alkyl aryl ketones.

Alkyl aryl ketones were synthesized via a nickel-catalyzed reductive coupling reaction of arylcarboxylic acid (2-pyridyl)esters with primary and secondary alkyl methanesulfonates under mild reaction conditions. This method suits a wide range of substrates and shows good compatibility with functional groups.

Synthesis of functionalized tetrahydrodibenzo[b,g][1,8]naphthyridin-1(2H)-ones through base-promoted annulation of quinoline-derived dipolarophiles and cyclic enaminones.

An eco-friendly and metal-free method for the synthesis of tetrahydrodibenzo[b,g][1,8]naphthyridin-1(2H)-ones was established. Quinoline-derived dipolarophiles and cyclic enaminones as starting materials undergo a 1,4-Michael addition/SNAr tandem annulation reaction affording the target products. This approach features transition metal-free conditions, good functional group tolerance and operational simplicity.

The First Enantiomeric Stereogenic Sulfur-Chiral Organic Ferroelectric Crystals.

Chiral ferroelectric crystals with intriguing features have attracted great interest and many with point or axial chirality based on the stereocarbon have been successively developed in recent years. However, ferroelectric crystals with stereogenic heteroatomic chirality have never been documented so far. Here, we discover and report a pair of enantiomeric stereogenic sulfur-chiral single-component organic ferroelectric crystals, Rs -tert-butanesulfinamide (Rs -tBuSA) and Ss -tert-butanesulfinamide (Ss -tBuSA) through the deep understanding of the chemical design of molecular ferroelectric crystals. Both enantiomers adopt chiral-polar point group 2 (C2 ) and exhibit mirror-image relationships. They undergo high-temperature 432F2-type plastic ferroelectric phase transition around 348 K. The ferroelectricity has been well confirmed by ferroelectric hysteresis loops and domains. Polarized light microscopy records the evolution of the ferroelastic domains, according with the fact that the 432F2-type phase transition is both ferroelectric and ferroelastic. The very soft characteristics with low elastic modulus and hardness reveals their excellent mechanical flexibility. This finding indicates the first stereosulfur chiral molecular ferroelectric crystals, opening up new fertile ground for exploring molecular ferroelectric crystals with great application prospects.

A Homochiral Fulgide Organic Ferroelectric Crystal with Photoinduced Molecular Orbital Breaking.

Thermally triggered spatial symmetry breaking in traditional ferroelectrics has been extensively studied for manipulation of the ferroelectricity. However, photoinduced molecular orbital breaking, which is promising for optical control of ferroelectric polarization, has been rarely explored. Herein, for the first time, we synthesized a homochiral fulgide organic ferroelectric crystal (E)-(R)-3-methyl-3-cyclohexylidene-4-(diphenylmethylene)dihydro-2,5-furandione (1), which exhibits both ferroelectricity and photoisomerization. Significantly, 1 shows a photoinduced reversible change in its molecular orbitals from the 3 π molecular orbitals in the open-ring isomer to 2 π and 1 σ molecular orbitals in the closed-ring isomer, which enables reversible ferroelectric domain switching by optical manipulation. To our knowledge, this is the first report revealing the manipulation of ferroelectric polarization in homochiral ferroelectric crystal by photoinduced breaking of molecular orbitals. This finding sheds light on the exploration of molecular orbital breaking in ferroelectrics for optical manipulation of ferroelectricity.

Rhodium(I)-Catalyzed P(III)-Directed Aromatic C-H Acylation with Amides.

The rhodium-catalyzed P(III)-directed aromatic C-H acylation reaction with amides is described. The reaction features a simple catalyst system, mild reaction conditions, monoacylation selectivity, a wide scope of substrates, and good compatibility of functional groups.

One-pot green preparation of deep-ultraviolet and dual-emission carbon nanodots for dual-channel ratiometric determination of polyphenol in tea sample.

A novel deep-ultraviolet and dual-emission carbon nanodots (DUCDs)-based dual-channel ratiometric probe was prepared by a one-pot environmental-friendly hydrothermal process using guanidine as the only starting material for sensing polyphenol in tea sample (TPPs). Under the exposure to TPPs, the DUCDs not only provided a characteristic colorimetric response to TPPs, but also displayed TPPs-sensitive ratiometric fluorescence quenching. The detection mechanism was proved to be that enrichment-specific hydroxyl sites (e.g., -NH2 and -COOH) of DUCDs can specifically react with phenolic hydroxyl groups of TPPs to generate dynamic amide and carboxylate bonds by dehydration and/or condensation reaction. As a result, a new carbon nanomaterial with decrement of surface passivation groups, inherent light-absorbing, and invalid fluorescence emission was generated. The ratio (FL297nm/FL395nm) of fluorescence intensity at 297 nm and 395 nm of DUCDs excited at 275 nm decreased with increasing TPPs concentration. The linearity range was 5.0 ng/mL to 100 µg/mL with a detection limit (DL) of 3.5 ± 0.04 ng/mL for TPPs (n = 3, 3σ/k). Colorimetry of DUCDs, best measured as absorbance at 320 nm, was increased linearly in the TPP concentration range 200 ng/mL-200 µg/mL with a DL of 94.7 ± 0.04 ng/mL (n = 3, 3σ/k). The probe was successfully applied to the determination of TPPs in real tea samples, showing potential application prospects in food analysis.

Salicylideneaniline is a Photoswitchable Ferroelectric Crystal.

Since the discovery of the first ferroelectric Rochelle salt, most ferroelectrics have been investigated showing thermally triggered symmetry-breaking phase transition. Although photochromism arising from geometrical isomerization was reported as early as 1867, such photoswitchable ferroelectric crystals have scarcely been developed to date. Herein, we report that salicylideneaniline is a photochromic ferroelectric crystal. Upon photoirradiation, the dielectric constant shows obvious switching between high and low dielectric states, and more importantly, the ferroelectric polarization demonstrates quick and reversible switching. This work opens the gate to developing photoswitchable ferroelectrics, which holds great potential for applications in optically controlled smart devices.

Nickel-Catalyzed Cross-Coupling of Aryl 2-Pyridyl Ethers with Organozinc Reagents: Removal of the Directing Group via Cleavage of the Carbon-Oxygen Bonds.

Reaction of aryl 2-pyridyl ethers with arylzinc reagents under catalysis of NiCl2(PCy3)2 affords aryl-aryl cross-coupling products via selective cleavage of CAr-OPy bonds. The reaction features a wide substrate range and good compatibility of functional groups. ß-H-free alkylzinc reagents are also applicable as the nucleophiles in the transformation, whereas ß-H-containing alkylzinc reagents lead to a mixture of cross-coupling and hydrogenation products.

Green synthesis of a deep-ultraviolet carbonized nanoprobe for ratiometric fluorescent detection of feroxacin and enrofloxacin in food and serum samples.

Recently, the development of a novel fluorescent (FL) nanoprobe for ratiometric detection of antibiotics in real-world samples has received more and more attention. In this article, the distinctive optical properties of deep-ultraviolet emission, a narrowed full width at half maximum (∼20 nm) and excitation-independent emission of a carbonized nanoprobe (CNP) were easily prepared by an environmentally friendly approach of solvothermal treatment using melamine as the precursor and H2O as the solvent. The obtained CNP can be further utilized as an efficient ratiometric FL nanoprobe for enrofloxacin (EFC) and feroxacin (FXC) detection based on the fact that the FL quenching of the CNP was accompanied by an FL increase with EFC/FXC based on the inner filter effect (IFE). Under the optimal conditions, excellent linear relationships existed between the relative FL intensity (FL290 nm/FL412 nm, CNP for FL290 nm and antibiotics for FL412 nm) and the concentrations of FXC and EFC in the range of 0.05-500.0 µM and 0.05-200.0 µM, with limits of detection of 21.74 and 22.43 nM (3σ/k), respectively. With the proposed ratiometric FL sensor, FXC and EFC in milk and serum samples can be rapidly and selectively analyzed without tedious pretreatment processes for real-world samples.