Temperature-adjustable F-carbon nanofiber/carbon fiber nanocomposite fibrous masks with excellent comfortability and anti-pathogen functionality.

Wearing surgical masks remains the most effective protective measure against COVID-19 before mass vaccination, but insufficient comfortability and low antibacterial/antiviral activities accelerate the replacement frequency of surgical masks, resulting in large amounts of medical waste. To solve this problem, we report new nanofiber membrane masks with outstanding comfortability and anti-pathogen functionality prepared using fluorinated carbon nanofibers/carbon fiber (F-CNFs/CF). This was used to replace commercial polypropylene (PP) nonwovens as the core layer of face masks. The through-plane and in-plane thermal conductivity of commercial PP nonwovens were only 0.12 and 0.20 W/m K, but the F-CNFs/CF nanofiber membranes reached 0.62 and 5.23 W/m K, which represent enhancements of 380% and 2523%, respectively. The surface temperature of the PP surgical masks was 23.9 ℃ when the wearing time was 15 min, while the F-CNFs/CF nanocomposite fibrous masks reached 27.3 ℃, displaying stronger heat dissipation. Moreover, the F-CNFs/CF nanofiber membranes displayed excellent electrical conductivity and produced a high-temperature layer that killed viruses and bacteria in the masks. The surface temperature of the F-CNFs/CF nanocomposite fibrous masks reached 69.2 ℃ after being connected to a portable power source for 60 s. Their antibacterial rates were 97.9% and 98.6% against E. coli and S. aureus, respectively, after being connected to a portable power source for 30 min.

Eco-friendly chitosan@silver/plant fiber membranes for masks with thermal comfortability and self-sterilization.

The surgical masks have been essential consumables for public in the COVID-19 pandemic. However, long-time wearing masks will make wearers feel uncomfortable and massive discarded non-biodegradable masks lead to a heavy burden on our environment. In this paper, we adopt degradable chitosan@silver (CS@Ag) core-shell fibers and plant fibers to prepare an eco-friendly mask with excellent thermal comfort, self-sterilization, and antiviral effects. The thermal network of CS@Ag core-shell fibers highly improves the in-plane thermal conductivity of masks, which is 4.45 times higher than that of commercial masks. Because of the electrical conductivity of Ag, the fabricated mask can be electrically heated to warm the wearer in a cold environment and disinfect COVID-19 facilely at room temperature. Meanwhile, the in-situ reduced silver nanoparticles (AgNPs) endow the mask with superior antibacterial properties. Therefore, this mask shows a great potential to address the urgent need for a thermally comfortable, antibacterial, antiviral, and eco-friendly mask. Supplementary Information: The online version contains supplementary material available at 10.1007/s10570-022-04582-x.

Synthesis of micro-crosslinked adamantane-containing matrix resins designed for deep-UV lithography resists and their application in nanoimprint lithography.

A certain type of photoresist used for deep-UV lithography (DUVL) can also be used for other types of photolithography. Thus, to meet the requirements of two or more lithography technologies simultaneously, it is necessary to design a variety of corresponding functional groups in the molecules of materials and obtain the required properties. Herein, we designed four matrix resins based on acrylate for DUVL, employing alkyl sulfide, adamantane, methyladamantane, and hydroxyl as dangling groups and a microcrosslinking network by adding a small amount of crosslinker. These polymers were used in the thermal nanoimprint lithography (NIL) process, and distinct patterns with a resolution of 100 nm were observed. The acrylate copolymers designed for DUVL in this work can be used as thermal NIL resists and to obtain good patterns. It was found that ethylene dimethacrylate (EDMA) and adamantane endowed the matrix resins with good thermal stability and that PMMHM demonstrated the best patterning performance among the four resins. These polymers can be applied in the manufacturing of high-density integrated circuits, nano-transistors, optoelectronic devices and other components in the future.

Biomimetic redox-responsive smart coatings with resistance-release functions for reverse osmosis membranes.

Membrane fouling induces catastrophic loss of separation performance and seriously restricts the applications of reverse osmosis (RO) membranes. Inspired by the mussel structure, polydopamine (PDA) and cystamine molecules (CA) with excellent anti-fouling properties were used to prepare accessible, biocompatible, and redox-responsive coatings for RO membranes. The PDA/CA-coated RO membranes exhibit a superior water flux of 65 L m-2 h-1 with a favourable NaCl rejection exceeding 99%. The water permeability through the PDA/CA-coated membrane is much higher than that of most membranes with similar rejection rates. Due to the formed protective hydration layers by PDA/CA coatings, anti-fouling properties against proteins, polysaccharides and surfactants were evaluated separately, and ultralow fouling properties were demonstrated. Moreover, the disulfide linkages in CA molecules can cleave in a reducing environment, yielding the degradation of PDA/CA coatings, thereby removing the foulants deposited on the coatings. The degradation endows the coated membranes with satisfying longtime anti-fouling properties, where the flux recovery reaches up to 90%. The construction of redox-responsive smart coatings not only provided a promising route to alleviate membrane fouling but can also be upscaled for use in numerous practical applications like sensors, medical devices, and drug delivery.