CATEcor: An Open Science, Shaded-Truss, Externally-Occulted Coronagraph.

We present the design of a portable coronagraph, CATEcor (where CATE stands for Continental-America Telescope Eclipse), that incorporates a novel "shaded-truss" style of external occultation and serves as a proof-of-concept for that family of coronagraphs. The shaded-truss design style has the potential for broad application in various scientific settings. We conceived CATEcor itself as a simple instrument to observe the corona during the darker skies available during a partial solar eclipse, or for students or interested amateurs to detect the corona under ideal noneclipsed conditions. CATEcor is therefore optimized for simplicity and accessibility to the public. It is implemented using an existing dioptric telescope and an adapter rig that mounts in front of the objective lens, restricting the telescope aperture and providing external occultation. The adapter rig, including occulter, is fabricated using fusion deposition modeling (FDM; colloquially "3D printing"), greatly reducing cost. The structure is designed to be integrated with moderate care and may be replicated in a university or amateur setting. While CATEcor is a simple demonstration unit, the design concept, process, and trades are useful for other more sophisticated coronagraphs in the same general family, which might operate under normal daytime skies outside the annular-eclipse conditions used for CATEcor.

The SWAP Filter: A Simple Azimuthally Varying Radial Filter for Wide-Field EUV Solar Images.

We present the SWAP Filter: an azimuthally varying, radial normalizing filter specifically developed for EUV images of the solar corona, named for the Sun Watcher with Active Pixels and Image Processing (SWAP) instrument on the Project for On-Board Autonomy 2 (PROBA2) spacecraft. We discuss the origins of our technique, its implementation and key user-configurable parameters, and highlight its effects on data via a series of examples. We discuss the filter's strengths in a data environment in which wide field-of-view observations that specifically target the low signal-to-noise middle corona are newly available and expected to grow in the coming years. Supplementary Information: The online version contains supplementary material available at 10.1007/s11207-023-02183-w.

Defining the Middle Corona.

The middle corona, the region roughly spanning heliocentric distances from 1.5 to 6 solar radii, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. The solar wind, eruptions, and flows pass through the region, and they are shaped by it. Importantly, the region also modulates inflow from above that can drive dynamic changes at lower heights in the inner corona. Consequently, the middle corona is essential for comprehensively connecting the corona to the heliosphere and for developing corresponding global models. Nonetheless, because it is challenging to observe, the region has been poorly studied by both major solar remote-sensing and in-situ missions and instruments, extending back to the Solar and Heliospheric Observatory (SOHO) era. Thanks to recent advances in instrumentation, observational processing techniques, and a realization of the importance of the region, interest in the middle corona has increased. Although the region cannot be intrinsically separated from other regions of the solar atmosphere, there has emerged a need to define the region in terms of its location and extension in the solar atmosphere, its composition, the physical transitions that it covers, and the underlying physics believed to shape the region. This article aims to define the middle corona, its physical characteristics, and give an overview of the processes that occur there.

Mechanistic Development and Recent Applications of the Chan-Lam Amination.

Transition metal-mediated formation of C-N bonds is an essential synthetic methodology. The discovery of the Chan-Lam amination provided a C-N bond forming process that was mild, convenient, and inexpensive, offering an alternative to complementary methods using other transition metals (TMs). Over the past 20 years, this reaction has seen considerable development in its scope of application, uptake into industry, and understanding of its mechanism. This review provides an account of the development of the Chan-Lam amination, highlighting progress and notable examples of application since 2011. Focus is given to evolution in mechanistic understanding and selected applications of the methodology within medicinal and process chemistry.

Investigation of the Middle Corona with SWAP and a Data-Driven Non-Potential Coronal Magnetic Field Model.

The large field-of-view of the Sun Watcher using Active Pixel System detector and Image Processing (SWAP) instrument onboard the PRoject for Onboard Autonomy 2 (PROBA2) spacecraft provides a unique opportunity to study extended coronal structures observed in the EUV in conjunction with global coronal magnetic field simulations. A global non-potential magnetic field model is used to simulate the evolution of the global corona from 1 September 2014 to 31 March 2015, driven by newly emerging bipolar active regions determined from Helioseismic and Magnetic Imager (HMI) magnetograms. We compare the large-scale structure of the simulated magnetic field with structures seen off-limb in SWAP EUV observations. In particular, we investigate how successful the model is in reproducing regions of closed and open structures, the scale of structures, and compare the evolution of a coronal fan observed over several rotations. The model is found to accurately reproduce observed large-scale, off-limb structures. When discrepancies do arise they mainly occur off the east solar limb due to active regions emerging on the far side of the Sun, which cannot be incorporated into the model until they are observed on the Earth-facing side. When such "late" active region emergences are incorporated into the model, we find that the simulated corona self-corrects within a few days, so that simulated structures off the west limb more closely match what is observed. Where the model is less successful, we consider how this may be addressed, through model developments or additional observational products. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s11207-020-01668-2) contains supplementary material, which is available to authorized users.

Ni vs. Pd in Suzuki-Miyaura sp2-sp2 cross-coupling: a head-to-head study in a comparable precatalyst/ligand system.

The Suzuki-Miyaura reaction is a cornerstone method for sp2-sp2 cross-coupling in industry. There has been a concerted effort to enable the use of Ni catalysis as an alternative to Pd in order to mitigate cost and improve sustainability. Despite significant advances, ligand development for Ni-catalyzed Suzuki-Miyaura cross-coupling remains underdeveloped when compared to Pd and, as a consequence, ligands for Ni-catalyzed processes are typically taken from the Pd arena. In this study we evaluate the effect of using a similar Ni and Pd precatalyst based on a common bidentate ligand (dppf) in a head-to-head format for the most common type of biaryl couplings, establishing the practical implications of direct replacement of Pd with Ni, and identifying the potential origins of these observations in a mechanistic context.

Interrogating Pd(II) Anion Metathesis Using a Bifunctional Chemical Probe: A Transmetalation Switch.

Ligand metathesis of Pd(II) complexes is mechanistically essential for cross-coupling. We present a study of halide→OH anion metathesis of (Ar)PdII complexes using vinylBPin as a bifunctional chemical probe with Pd(II)-dependent cross-coupling pathways. We identify the variables that profoundly impact this event and allow control to be leveraged. This then allows control of cross-coupling pathways via promotion or inhibition of organoboron transmetalation, leading to either Suzuki-Miyaura or Mizoroki-Heck products. We show how this transmetalation switch can be used to synthetic gain in a cascade cross-coupling/Diels-Alder reaction, delivering borylated or non-borylated carbocycles, including steroid-like scaffolds.

The spectroscopic detection of drugs of abuse in fingerprints after development with powders and recovery with adhesive lifters.

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes and are then stored in evidence bags to allow secure transit and also to preserve the chain of evidence. In a previous study we have shown that exogenous material within a fingerprint can be detected using Raman spectroscopy following development with powders and lifting with adhesive tapes. Other reports have detailed the use of Raman spectroscopy to the detection of drugs of abuse in latent fingerprints including cyanoacrylate-fumed fingerprints. This study involves the application of Raman spectroscopy for the analysis of drugs of abuse in latent fingerprints for fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. Samples of seized ecstasy, cocaine, ketamine and amphetamine were supplied by East Sussex Police and by the TICTAC unit at St. Georges Hospital Tooting. Contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Spectral subtraction was performed to remove peaks due to the hinge lifters using OMNIC software. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint.

Mechanism of Cu-Catalyzed Aryl Boronic Acid Halodeboronation Using Electrophilic Halogen: Development of a Base-Catalyzed Iododeboronation for Radiolabeling Applications.

An investigation into the mechanism of Cu-catalyzed aryl boronic acid halodeboronation using electrophilic halogen reagents is reported. Evidence is provided to show that this takes place via a boronate-driven ipso-substitution pathway and that Cu is not required for these processes to operate: general Lewis base catalysis is operational. This in turn allows the rational development of a general, simple, and effective base-catalyzed halodeboronation that is amenable to the preparation of 125I-labeled products for SPECT applications.

Detection of drugs of abuse by Raman spectroscopy.

Raman spectroscopy can provide rapid, sensitive, non-destructive analysis of a variety of drug types (e.g. amphetamines, alkaloids, designer drugs, and date rape drugs). This review concentrates on developments in the past 15 years. It considers identification and quantification of drugs of abuse in different types of forensic evidence, including bulk street drugs as well as traces found in drinks, on fibres/clothing, in fingerprints, on fingernails, on bank notes, and in body fluids.

The spectroscopic detection of drugs of abuse on textile fibres after recovery with adhesive lifters.

Fibres are one of the most common forms of evidence associated with forensic investigations. The use of adhesive lifters to recover fibres from crime scene samples has long been established as an effective method to recover such items of evidence. Once fibres have been lifted they are transferred to evidence bags for storage, safe transport and to preserve the chain of evidence. This study shows that when fibres are tape lifted particles of substances present trapped within those fibres are also lifted. Cotton, linen and wool fibres were examined in colours ranging from white to black. Samples of seized ecstasy, cocaine, ketamine and amphetamine were supplied by East Sussex Police and by the TICTAC unit at St Georges Hospital Tooting. The Raman spectra obtained showed that it is possible to identify drugs of abuse from particles trapped within fibres without interference from the fibre itself. It was also possible to obtain spectra after fibres were lifted with adhesive tapes without the detection process being compromised. Raman spectra from particles of drugs of abuse within fibres following tape lifting were also recorded through evidence bags. Again the detection process was not compromised. This initial study has shown that fibres have the potential to provide even more evidence than they do currently. Individuals that have had drugs of abuse about their person may have trace amounts of these substances trapped within the fibres of their clothing. This may be of particular importance if drugs have been carried in pockets of a garment. This technique has the advantage of being non-destructive, allows for re-testing, requires no sample preparation and also can be performed on samples without removal from the evidence bag thus removing any potential risk of contamination. It is important however to remember that when dealing with trace amounts of drugs of abuse the presence of such particles may be due to innocent transfer of such particles. Detection of particles of drugs of abuse on clothing does not necessarily indicate criminal activity in the absence of other evidence.

The spectroscopic detection of exogenous material in fingerprints after development with powders and recovery with adhesive lifters.

The application of powders to fingerprints has long been established as an effective and reliable method for developing latent fingerprints. The powders adhere to the ridge pattern of the fingerprint only, thus allowing the image to be visualised. Fingerprints developed in situ at a crime scene routinely undergo lifting with specialist tapes to facilitate subsequent laboratory analysis. As with all recovered evidence these samples would be stored in evidence bags to allow secure transit from the scene to the laboratory and also to preserve the chain of evidence. In this paper, the application of Raman spectroscopy for the analysis of exogenous material in latent fingerprints is reported for contaminated fingerprints that had been treated with powders and also subsequently lifted with adhesive tapes. A selection of over the counter (OTC) analgesics were used as samples for the analysis and contaminated fingerprints were deposited on clean glass slides. The application of aluminium or iron based powders to contaminated fingerprints did not interfere with the Raman spectra obtained for the contaminants. In most cases background fluorescence attributed to the sebaceous content of the latent fingerprint was reduced by the application of the powder thus reducing spectral interference. Contaminated fingerprints developed with powders and then lifted with lifting tapes were also examined. The combination of these two techniques did not interfere with the successful analysis of exogenous contaminants by Raman spectroscopy. The lifting process was repeated using hinge lifters. As the hinge lifters exhibited strong Raman bands the spectroscopic analysis was more complex and an increase in the number of exposures to the detector allowed for improved clarification. Raman spectra of developed and lifted fingerprints recorded through evidence bags were obtained and it was found that the detection process was not compromised in any way. Although the application of powders did not interfere with the detection process the time taken to locate the contaminant was increased due to the physical presence of more material within the fingerprint. The presence of interfering Raman bands from lifting tapes is another potential complication. This, however, could be removed by spectral subtraction or by the choice of lifting tapes that have only weak Raman bands.