Evaluation of the effect of landfill leachate on surface and groundwater quality: a case study in tropical Sri Lanka using the evidence of stable isotopes.

The disposal of solid wastes is a significant problem in urban areas in many developed and developing countries. Waterways are often subjected to pollution by effluents discharged from solid waste dumpsites. The stable isotopes and water quality data provide useful information on tracing pollutant sources and their contaminant pathways. The effect of a major solid waste dumpsite on surface and groundwater quality of the surrounding area was investigated by measuring water quality parameters and stable isotopes of deuterium (2H), oxygen (18O), 15 N-ΝΟ3 and 18O-NO3 in tropical Sri Lanka. The surface water and groundwater wells close to the dumpsite indicated clear evidence of leachate contamination with enriched total dissolved solids (TDS), total suspended solids (TSS), ammonia, biochemical oxygen demand (BOD5) and Cl- levels. The correlation of groundwater quality parameters, i.e. EC (-r2 = 0.8), TDS (-r2 = 0.8), TSS (-r2 = 0.5), ammonia (-r2 = 0.4), phosphates (-0.6), sulphates (-0.5), Cl- (-0.6) and isotope δ2H‰ (-0.9) with distance from the dumpsite, further confirmed the effects of dumpsite on groundwater quality. The composition of δ15N-ΝΟ3 and δ18O-NO3 isotopes in the groundwater indicated that the dominant source of NO3- to groundwater is manure septic originating from the dumpsite. The findings of the study provided clear evidence of the effect of open dumping on the water resources of the surrounding area and the need for remedial measures.

Carbon sequestration value of biosolids applied to soil: A global meta-analysis.

Biosolids produced at wastewater treatment facilities are extensively used in agricultural land and degraded mine sites to improve soil health and soil organic carbon (SOC) stocks. Many studies have reported increases in SOC due to application of biosolids to such sites. However, lack of a comprehensive quantification on overall trends and changes of magnitude in SOC remains. Here, we performed a meta-analysis to identify drivers with a relationship with SOC stocks. A meta-regression of 297 treatments found four variables with a relationship with SOC stocks: cumulative biosolids carbon (C) input rate, time after application, soil depth and type of biosolids. The cumulative biosolids C input rate was the most influencing driver. The highest mean difference for SOC% of 3.3 was observed at 0-15 cm soil depth for a cumulative C input of 100 Mg ha-1 at one year after biosolids application. Although years after biosolids application demonstrated a negative relationship with SOC stocks, mineralization of C in biosolids-applied soils is slow, as indicated with the SOC% decrease from 4.6 to 2.8 at 0-15 cm soil depth over five years of 100 Mg ha-1 biosolids C input. Soil depth illustrated a strong negative effect with SOC stocks decreasing by 2.7% at 0-15 cm soil depth at a cumulative biosolids C input of 100 Mg ha-1 over a year. Overall, our model estimated an effect of 2.8 SOC% change, indicating the application of biosolids as a viable strategy for soil C sequestration on a global scale.

Impact of wastewater derived dissolved organic carbon on reduction, mobility, and bioavailability of As(V) and Cr(VI) in contaminated soils.

In this work, the effects of various wastewater sources (storm water, sewage effluent, piggery effluent, and dairy effluent) on the reduction, and subsequent mobility and bioavailability of arsenate [As(V)] and chromate [Cr(VI)] were compared using both spiked and field contaminated soils. Wastewater addition to soil can increase the supply of carbon, nutrients, and stimulation of microorganisms which are considered to be important factors enhancing the reduction of metal(loid)s including As and Cr. The wastewater-induced mobility and bioavailability of As(V) and Cr(VI) were examined using leaching, earthworm, and soil microbial activity tests. The rate of reduction of As(V) was much less than that of Cr(VI) both in the presence and absence of wastewater addition. Wastewater addition increased the reduction of both As(V) and Cr(VI) compared to the control (Milli-Q water) and the effect was more pronounced in the case of Cr(VI). The leaching experiment indicated that Cr(VI) was more mobile than As(V). Wastewater addition increased the mobility and bioavailability of As(V), but had an opposite effect on Cr(VI). The difference in the mobility and bioavailability of Cr(VI) and As(V) between wastewater sources can be attributed to the difference in their dissolved organic carbon (DOC) content. The DOC provides carbon as an electron donor for the reduction of As(V) and Cr(VI) and also serves as a complexing agent thereby impacting their mobility and bioavailability. The DOC-induced reduction increased both the mobility and bioavailability of As, but it caused an opposite effect in the case of Cr.

Occurrence and abundance of microplastics and plasticizers in landfill leachate from open dumpsites in Sri Lanka.

This is the first attempt that investigate the abundance of plasticizers in leachate sediment in the scientific literature, alongside the debut effort to explore the abundance of microplastics and plasticizers in landfill leachate and sediment in Sri Lanka. Microplastics in sizes ranging from ≥2.0-5.0, ≥1.0-2.0, and ≥ 0.5-1.0 mm were extracted from the leachate draining from ten municipal solid waste open dump sites and sediment samples covering seven districts. Microplastics were extracted by density separation (Saturated ZnCl2) followed by wet peroxide digestion and the chemical identification was conducted by Fourier Transform Infrared spectroscopy. Plasticizers were extracted to hexane and analyzed by high-performance liquid chromatography. The total mean microplastic abundance in leachate was 2.06 ± 0.62 mg/L whereas it was 363 ± 111 mg/kg for leachate sediments. The most frequently found polymer type was polyethylene (>50%), and white color was dominant. The average concentration of bisphenol A (BPA), benzophenone (BP) and diethyl-hydrogen phthalate (DHEP) in leachate was 158 ± 84.4, 0.75 ± 0.16 and 170 ± 85.8 µg/L respectively. Furthermore, BP and DHEP in leachate sediment was 100 ± 68.3 and 1034 ± 455 µg/kg respectively. As landfill leachate is directly discharged into nearby surface and groundwater bodies that serve as sources of drinking water, the study highlights the potential concerns of microplastic and plasticizer exposure to the surrounding Sri Lankan community through consumption of contaminated drinking water. Therefore, there is a timely need of develop the effective waste management and pollution control measures to minimize the possible threats to both the environment and human health.

The distribution, fate, and environmental impacts of food additive nanomaterials in soil and aquatic ecosystems.

Nanomaterials in the food industry are used as food additives, and the main function of these food additives is to improve food qualities including texture, flavor, color, consistency, preservation, and nutrient bioavailability. This review aims to provide an overview of the distribution, fate, and environmental and health impacts of food additive nanomaterials in soil and aquatic ecosystems. Some of the major nanomaterials in food additives include titanium dioxide, silver, gold, silicon dioxide, iron oxide, and zinc oxide. Ingestion of food products containing food additive nanomaterials via dietary intake is considered to be one of the major pathways of human exposure to nanomaterials. Food additive nanomaterials reach the terrestrial and aquatic environments directly through the disposal of food wastes in landfills and the application of food waste-derived soil amendments. A significant amount of ingested food additive nanomaterials (> 90 %) is excreted, and these nanomaterials are not efficiently removed in the wastewater system, thereby reaching the environment indirectly through the disposal of recycled water and sewage sludge in agricultural land. Food additive nanomaterials undergo various transformation and reaction processes, such as adsorption, aggregation-sedimentation, desorption, degradation, dissolution, and bio-mediated reactions in the environment. These processes significantly impact the transport and bioavailability of nanomaterials as well as their behaviour and fate in the environment. These nanomaterials are toxic to soil and aquatic organisms, and reach the food chain through plant uptake and animal transfer. The environmental and health risks of food additive nanomaterials can be overcome by eliminating their emission through recycled water and sewage sludge.

Global perspective on microplastics in landfill leachate; Occurrence, abundance, characteristics, and environmental impact.

Plastic wastes deposited in landfills eventually break down and degrade into microplastics by physical, chemical, and biological forces. Though microplastics in leachate pose significant threats to the environment, the leachate generated from landfills has not received much attention as a possible source of environmental microplastics. A descriptive and systematic investigationof the global distribution of microplastics in landfill leachate does not exist to date. Therefore, this attempt is to provide a concise scientometric review of the studies on the presence of microplastics in landfill leachate. The present review revealed that the global trend in research on microplastics in leachate has increased exponentially after 2018 and China is the leading country. Different geographical regions have reported different microplastic abundances with the highest of 291.0 ± 91.0 items/L from a landfill in Shanghai. The use of novel sampling techniques to detect small microplastics (20-100 µm) has led to the high abundance of microplastics in landfill leachate in Shanghai. Due to its widespread usage, polyethylene is the most typically encountered polymer type in landfill leachate around the world. However, it is quite challengingto compare the results among studies due to the use of different size categories and extraction techniques. The removal of microplastics by the current leachate treatment facilities is still mostly unexplored, thus it is crucial to develop novel technologies to treat the microplastics in landfill leachate. Further investigations on the transport of microplastics in landfill leachate are urgently required to have a better understanding of potential human exposure and health implications.

Microplastics and plastics-associated contaminants in food and beverages; Global trends, concentrations, and human exposure.

Microplastics has become a global concern due to their ubiquitous presence which poses unavoidable human exposure risks. Geographical distribution and yearly trends of research on microplastics, food, and beverages do not exist. Thus, no overall account is available regarding the presence of microplastics and plastics-associated contaminants in food and beverages. Hence, this attempt is to review the geographical distribution of studies through a brief bibliometric analysis and the plastics-associated contaminants including plasticizers and microplastics in food and beverages. Estimated microplastic consumption has been listed for the pool of publications reviewed here. Further, this review discusses the ingestion potency of micropollutants associated with microplastics, possible health impacts, and existing challenges. Global trend in research exponentially increased after 2018 and China is leading. Studies on microplastics were limited to a few beverages and food; milk, beer, tea, refreshing drinks, salt, sugar, honey, etc., whereas seafood and drinking water have been extensively studied. Publications on plastic-additives were reported in two ways; migration of plastic-additives from packaging by leaching and the presence of plastic-additives in food and beverages. Bisphenol A and bis(2-Ethylhexyl) phthalate were the most frequently reported both in food and beverages. Exposure of packaging material to high temperatures predominantly involves plastic-additive contamination in food and beverages. Microplastics-bound micropollutants can also be ingested through food and beverages; however, a lack of knowledge exists. The complex matrix of food or beverages and the absence of standard procedures for analysis of microplastics and micropollutants exist as challenges. More investigations on the presence of microplastics and plastic-additives in food and beverage are urgent needs to a better assessment of potential human exposure and human health risk.

Beryllium contamination and its risk management in terrestrial and aquatic environmental settings.

Beryllium (Be) is a relatively rare element and occurs naturally in the Earth's crust, in coal, and in various minerals. Beryllium is used as an alloy with other metals in aerospace, electronics and mechanical industries. The major emission sources to the atmosphere are the combustion of coal and fossil fuels and the incineration of municipal solid waste. In soils and natural waters, the majority of Be is sorbed to soil particles and sediments. The majority of contamination occurs through atmospheric deposition of Be on aboveground plant parts. Beryllium and its compounds are toxic to humans and are grouped as carcinogens. The general public is exposed to Be through inhalation of air and the consumption of Be-contaminated food and drinking water. Immobilization of Be in soil and groundwater using organic and inorganic amendments reduces the bioavailability and mobility of Be, thereby limiting the transfer into the food chain. Mobilization of Be in soil using chelating agents facilitates their removal through soil washing and plant uptake. This review provides an overview of the current understanding of the sources, geochemistry, health hazards, remediation practices, and current regulatory mandates of Be contamination in complex environmental settings, including soil and aquatic ecosystems.

Sustainable management of hazardous asbestos-containing materials: Containment, stabilization and inertization.

Asbestos is a group of six major silicate minerals that belong to the serpentine and amphibole families, and include chrysotile, amosite, crocidolite, anthophyllite, tremolite and actinolite. Weathering and human disturbance of asbestos-containing materials (ACMs) can lead to the emission of asbestos dust, and the inhalation of respirable asbestos fibrous dust can lead to 'mesothelioma' cancer and other diseases, including the progressive lung disease called 'asbestosis'. There is a considerable legacy of in-situ ACMs in the built environment, and it is not practically or economically possible to safely remove ACMs from the built environment. The aim of the review is to examine the three approaches used for the sustainable management of hazardous ACMs in the built environment: containment, stabilization, and inertization or destruction. Most of the asbestos remaining in the built environment can be contained in a physically secured form so that it does not present a significant health risk of emitting toxic airborne fibres. In settings where safe removal is not practically feasible, stabilization and encapsulation can provide a promising solution, especially in areas where ACMs are exposed to weathering or disturbance. Complete destruction and inertization of asbestos can be achieved by thermal decomposition using plasma and microwave radiation. Bioremediation and chemical treatment (e.g., ultrasound with oxalic acid) have been found to be effective in the inertization of ACMs. Technologies that achieve complete destruction of ACMs are found to be attractive because the treated products can be recycled or safely disposed of in landfills.

Boron contamination and its risk management in terrestrial and aquatic environmental settings.

Boron (B) is released to terrestrial and aquatic environments through both natural and anthropogenic sources. This review describes the current knowledge on B contamination in soil and aquatic environments in relation to its geogenic and anthropogenic sources, biogeochemistry, environmental and human health impacts, remediation approaches, and regulatory practices. The common naturally occurring sources of B include borosilicate minerals, volcanic eruptions, geothermal and groundwater streams, and marine water. Boron is extensively used to manufacture fiberglass, thermal-resistant borosilicate glass and porcelain, cleaning detergents, vitreous enamels, weedicides, fertilizers, and B-based steel for nuclear shields. Anthropogenic sources of B released into the environment include wastewater for irrigation, B fertilizer application, and waste from mining and processing industries. Boron is an essential element for plant nutrition and is taken up mainly as boric acid molecules. Although B deficiency in agricultural soils has been observed, B toxicity can inhibit plant growth in soils under arid and semiarid regions. High B intake by humans can be detrimental to the stomach, liver, kidneys and brain, and eventually results in death. Amelioration of soils and water sources enriched with B can be achieved by immobilization, leaching, adsorption, phytoremediation, reverse osmosis, and nanofiltration. The development of cost-effective technologies for B removal from B-rich irrigation water including electrodialysis and electrocoagulation techniques is likely to help control the predominant anthropogenic input of B to the soil. Future research initiatives for the sustainable remediation of B contamination using advanced technologies in soil and water environments are also recommended.

Contamination and distribution of buried microplastics in Sarakkuwa beach ensuing the MV X-Press Pearl maritime disaster in Sri Lankan sea.

Abundance of buried microplastics in sand profiles and pellet pollution index at Sarakkuwa beach, at west-coast of Sri Lanka was studied as a case study due to the receival of plastic nurdles and debris from the MV X-Press Pearl ship disaster in May 2021. Sand collected at 7 locations to a depth of 2 m in different depths for a beach segment of 200 × 25 m2 during October 2021 and sand samples obtained from beach surface during March 2020 from the same location were analyzed for microplastics. Beach was contaminated with 2-5 mm sized partially pyrolyzed LDPE fragments and nurdles demonstrating a peak abundance of 13.3702 g/kg and1 mm-500 µm sized LDPE fragments up to 2.0 m depth. High concentrations of Mo and Cr were observed in the sand collected in 2021. Sarakkuwa beach is critically polluted by nurdles, partially pyrolyzed microplastics, and toxic elements from ship disaster.

Treatment processes to eliminate potential environmental hazards and restore agronomic value of sewage sludge: A review.

Land application of sewage sludge is increasingly used as an alternative to landfilling and incineration owing to a considerable content of carbon and essential plant nutrients in sewage sludge. However, the presence of chemical and biological contaminants in sewage sludge poses potential dangers; therefore, sewage sludge must be suitably treated before being applied to soils. The most common methods include anaerobic digestion, aerobic composting, lime stabilization, incineration, and pyrolysis. These methods aim at stabilizing sewage sludge, to eliminate its potential environmental pollution and restore its agronomic value. To achieve best results on land, a comprehensive understanding of the transformation of organic matter, nutrients, and contaminants during these sewage-sludge treatments is essential; however, this information is still lacking. This review aims to fill this knowledge gap by presenting various approaches to treat sewage sludge, transformation processes of some major nutrients and pollutants during treatment, and potential impacts on soils. Despite these treatments, overtime there are still some potential risks of land application of treated sewage sludge. Potentially toxic substances remain the main concern regarding the reuse of treated sewage sludge on land. Therefore, further treatment may be applied, and long-term field studies are warranted, to prevent possible adverse effects of treated sewage sludge on the ecosystem and human health and enable its land application.

Antimony contamination and its risk management in complex environmental settings: A review.

Antimony (Sb) is introduced into soils, sediments, and aquatic environments from various sources such as weathering of sulfide ores, leaching of mining wastes, and anthropogenic activities. High Sb concentrations are toxic to ecosystems and potentially to public health via the accumulation in food chain. Although Sb is poisonous and carcinogenic to humans, the exact mechanisms causing toxicity still remain unclear. Most studies concerning the remediation of soils and aquatic environments contaminated with Sb have evaluated various amendments that reduce Sb bioavailability and toxicity. However, there is no comprehensive review on the biogeochemistry and transformation of Sb related to its remediation. Therefore, the present review summarizes: (1) the sources of Sb and its geochemical distribution and speciation in soils and aquatic environments, (2) the biogeochemical processes that govern Sb mobilization, bioavailability, toxicity in soils and aquatic environments, and possible threats to human and ecosystem health, and (3) the approaches used to remediate Sb-contaminated soils and water and mitigate potential environmental and health risks. Knowledge gaps and future research needs also are discussed. The review presents up-to-date knowledge about the fate of Sb in soils and aquatic environments and contributes to an important insight into the environmental hazards of Sb. The findings from the review should help to develop innovative and appropriate technologies for controlling Sb bioavailability and toxicity and sustainably managing Sb-polluted soils and water, subsequently minimizing its environmental and human health risks.

Interactions between microplastics, pharmaceuticals and personal care products: Implications for vector transport.

Microplastics are well known for vector transport of hydrophobic organic contaminants, and there are growing concerns regarding their potential adverse effects on ecosystems and human health. However, recent studies focussing on hydrophilic compounds, such as pharmaceuticals and personal care products (PPCPs), have shown that the compounds ability to be adsorbed onto plastic surfaces. The extensive use of PPCPs has led to their ubiquitous presence in the environment resulting in their cooccurrence with microplastics. The partitioning between plastics and PPCPs and their fate through vector transport are determined by various physicochemical characteristics and environmental conditions of specific matrices. Although the sorption capacities of microplastics for different PPCP compounds have been investigated extensively, these findings have not yet been synthesized and analyzed critically. The specific objectives of this review were to synthesize and critically assess the various factors that affect the adsorption of hydrophilic compounds such as PPCPs on microplastic surfaces and their fate and transport in the environment. The review also focuses on environmental factors such as pH, salinity, and dissolved organics, and properties of polymers and PPCP compounds, and the relationships with sorption dynamics and mechanisms. Furthermore, the ecotoxicological effects of PPCP-sorbed microplastics on biota and human health are also discussed.

Mitigation of petroleum-hydrocarbon-contaminated hazardous soils using organic amendments: A review.

The term "Total petroleum hydrocarbons" (TPH) is used to describe a complex mixture of petroleum-based hydrocarbons primarily derived from crude oil. Those compounds are considered as persistent organic pollutants in the terrestrial environment. A wide array of organic amendments is increasingly used for the remediation of TPH-contaminated soils. Organic amendments not only supply a source of carbon and nutrients but also add exogenous beneficial microorganisms to enhance the TPH degradation rate, thereby improving the soil health. Two fundamental approaches can be contemplated within the context of remediation of TPH-contaminated soils using organic amendments: (i) enhanced TPH sorption to the exogenous organic matter (immobilization) as it reduces the bioavailability of the contaminants, and (ii) increasing the solubility of the contaminants by supplying desorbing agents (mobilization) for enhancing the subsequent biodegradation. Net immobilization and mobilization of TPH have both been observed following the application of organic amendments to contaminated soils. This review examines the mechanisms for the enhanced remediation of TPH-contaminated soils by organic amendments and discusses the influencing factors in relation to sequestration, bioavailability, and subsequent biodegradation of TPH in soils. The uncertainty of mechanisms for various organic amendments in TPH remediation processes remains a critical area of future research.

Indoor Particulate Matter in Urban Households: Sources, Pathways, Characteristics, Health Effects, and Exposure Mitigation.

Particulate matter (PM) is a complex mixture of solid particles and liquid droplets suspended in the air with varying size, shape, and chemical composition which intensifies significant concern due to severe health effects. Based on the well-established human health effects of outdoor PM, health-based standards for outdoor air have been promoted (e.g., the National Ambient Air Quality Standards formulated by the U.S.). Due to the exchange of indoor and outdoor air, the chemical composition of indoor particulate matter is related to the sources and components of outdoor PM. However, PM in the indoor environment has the potential to exceed outdoor PM levels. Indoor PM includes particles of outdoor origin that drift indoors and particles that originate from indoor activities, which include cooking, fireplaces, smoking, fuel combustion for heating, human activities, and burning incense. Indoor PM can be enriched with inorganic and organic contaminants, including toxic heavy metals and carcinogenic volatile organic compounds. As a potential health hazard, indoor exposure to PM has received increased attention in recent years because people spend most of their time indoors. In addition, as the quantity, quality, and scope of the research have expanded, it is necessary to conduct a systematic review of indoor PM. This review discusses the sources, pathways, characteristics, health effects, and exposure mitigation of indoor PM. Practical solutions and steps to reduce exposure to indoor PM are also discussed.

From mine to mind and mobiles - Lithium contamination and its risk management.

With the ever-increasing demand for lithium (Li) for portable energy storage devices, there is a global concern associated with environmental contamination of Li, via the production, use, and disposal of Li-containing products, including mobile phones and mood-stabilizing drugs. While geogenic Li is sparingly soluble, Li added to soil is one of the most mobile cations in soil, which can leach to groundwater and reach surface water through runoff. Lithium is readily taken up by plants and has relatively high plant accumulation coefficient, albeit the underlying mechanisms have not been well described. Therefore, soil contamination with Li could reach the food chain due to its mobility in surface- and ground-waters and uptake into plants. High environmental Li levels adversely affect the health of humans, animals, and plants. Lithium toxicity can be considerably managed through various remediation approaches such as immobilization using clay-like amendments and/or chelate-enhanced phytoremediation. This review integrates fundamental aspects of Li distribution and behaviour in terrestrial and aquatic environments in an effort to efficiently remediate Li-contaminated ecosystems. As research to date has not provided a clear picture of how the increased production and disposal of Li-based products adversely impact human and ecosystem health, there is an urgent need for further studies on this field.

Remediation of poly- and perfluoroalkyl substances (PFAS) contaminated soils - To mobilize or to immobilize or to degrade?

Poly- and perfluoroalkyl substances (PFASs) are synthetic chemicals, which are introduced to the environment through anthropogenic activities. Aqueous film forming foam used in firefighting, wastewater effluent, landfill leachate, and biosolids are major sources of PFAS input to soil and groundwater. Remediation of PFAS contaminated solid and aqueous media is challenging, which is attributed to the chemical and thermal stability of PFAS and the complexity of PFAS mixtures. In this review, remediation of PFAS contaminated soils through manipulation of their bioavailability and destruction is presented. While the mobilizing amendments (e.g., surfactants) enhance the mobility and bioavailability of PFAS, the immobilizing amendments (e.g., activated carbon) decrease their bioavailability and mobility. Mobilizing amendments can be applied to facilitate the removal of PFAS though soil washing, phytoremediation, and complete destruction through thermal and chemical redox reactions. Immobilizing amendments are likely to reduce the transfer of PFAS to food chain through plant and biota (e.g., earthworm) uptake, and leaching to potable water sources. Future studies should focus on quantifying the potential leaching of the mobilized PFAS in the absence of removal by plant and biota uptake or soil washing, and regular monitoring of the long-term stability of the immobilized PFAS.

Particulate plastics as a vector for toxic trace-element uptake by aquatic and terrestrial organisms and human health risk.

Particulate plastics in the terrestrial and aquatic environments are small plastic fragments or beads (i.e., 5 mm down to the nanometre range). They have been frequently referred to as 'micro-plastics' or 'nano-plastics'. Research has identified particulate plastics as a vector for toxic trace elements in the environment. The adsorption of toxic trace elements by particulate plastics may be facilitated by their high surface area and functionalized surfaces (e.g., through the attachment of natural organic matter). Other factors, such as environmental conditions (e.g., pH and water salinity), surface charge, and trace element oxidation status, also influence the adsorption of trace elements onto particulate plastics. Because of their small size and persistence, particulate plastics and the associated toxic trace elements are readily ingested and accumulated in many terrestrial and aquatic organisms. Thus, these plastics can have severe environmental consequences, such as the development of metal toxicity, within aquatic and terrestrial organisms. Humans could also become exposed to particulate plastics through food chain contamination and airborne ingestion. This review provides an overview of the sources of particulate plastics in the environment. To this end, we describe particulate plastics made of synthetic polymers, their origin, and characteristics with emphasis on how particulate plastics and associated toxic trace elements contaminate terrestrial and aquatic ecosystems. Future research needs and strategies are discussed to help reduce the environmental risks of particulate plastics as a potent vector for the transportation of toxic trace elements.

Trace element dynamics of biosolids-derived microbeads.

This study focused on quantifying and characterising microbeads in biosolids (i.e., treated sewage sludge), and in examining interactions of microbeads with trace elements when biosolids are added to soil. Under laboratory conditions, batch experiments were conducted to investigate the adsorption of Cu onto pure and surface modified microbeads suspended in soil. The ecotoxicity of microbead-metal complexes to soil microbial activities was also investigated by monitoring basal respiration and dehydrogenase activity. Concentrations of the microbeads were 352, 146, 324, and 174 particles kg-1 biosolids for ≤50, 50-100, 100-250, 250-1000 µm size fractions, respectively. The Scanning Electron Microscope (SEM) images illustrated wrinkled and fractured surfaces due to degradation. The adsorption of dissolved organic matter onto microbeads was confirmed through FT-IR microscopy, while using Inductively Coupled Plasma Mass Spectrometer (ICP-MS) the presence of trace metals including Cd (2.34 ng g-1), Cu (180.64 ng g-1), Ni (12.69 ng g-1), Pb (1.17 ng g-1), Sb (14.43 ng g-1), and Zn (178.03 ng g-1) was revealed. Surface modified microbeads were capable of adsorbing Cu compared to the pure microbeads, which may be attributed to the complexation of Cu with dissolved organic matter associated with the microbeads in the matrix. It was further revealed that the biosolids derived microbead-metal complexes decreased soil respiration (up to ∼ 26%) and dehydrogenase activity (up to ∼ 39%). Hence, microbeads reaching biosolids during wastewater treatment are likely to serve as a vector for trace element contamination, transportation, and toxicity when biosolids are applied to soil.