Purified fluorescent nanohybrids based on quantum dot-HER2-antibody for breast tumor target imaging.

Quantum dots (QDs) have been widely used for bioimaging in vivo because of their excellent optical properties. As part of the preparation process of QD-based nanohybrids, purification is an important step for minimizing contaminants and improving the quality of the product. In this work, we describe high-performance size exclusion chromatography (HPSEC) used to purify nanohybrids of CdSe/ZnS QDs and anti-human epidermal growth factor receptor 2 antibodies (QD-HER2-Ab). The unbound antibody and suspended agglomerates were removed from freshly prepared QD-HER2-Ab via HPSEC. Pure and homogeneous QD-HER2-Ab were then used as immunofluorescence target imaging bioprobes in vivo. The QD-HER2-Ab did not cause any obvious acute toxicity in mice one week after a single intravenous injection of 15 nmol/kg. The purified QD-HER2-Ab bioprobes showed high tumor targeting ability in a human breast tumor xenograft nude mouse model (24 h after injected) with the possibility of in vivo immunofluorescence tumor imaging. The immunofluorescence imaging background signal and acute toxicity in vivo were minimized because of the reduction of residual QDs. HPSEC-purified QD-HER2-Ab is an accurate and convenient tool for in vivo tumor target imaging and HER2 detection, thus providing a basis for the purification of other QD-based bioprobes.

Synthesis of spiropyrans via the Rh(III)-catalyzed annulation of 3-aryl-2H-benzo[b][1,4]oxazines with diazo ketoesters.

Rh(III)-Catalyzed 1 : 2 coupling of 3-aryl-2H-benzo[b][1,4]oxazines with α-diazo-ß-ketoesters has been realized for the mild synthesis of spiropyrans. The reaction proceeded via twofold C-H activation followed by unusual [3+3] and [4+2] annulation with decent functional group tolerance. Moreover, a pyranoid-skeleton intermediate was isolated as a key intermediate as a result of monoalkylation and enol oxygen annulation, which offers direct mechanistic insight.

Binary Promoter Improving the Moderate-Temperature Adhesion of Addition-Cured Liquid Silicone Rubber for Thermally Conductive Potting.

The strong adhesion of thermally conductive silicone encapsulants on highly integrated electronic devices can avoid external damages and lead to an improved long-term reliability, which is critical for their commercial application. However, due to their low surface energy and chemical reactivity, the self-adhesive ability of silicone encapsulants to substrates need to be explored further. Here, we developed epoxy and alkoxy groups-bifunctionalized tetramethylcyclotetrasiloxane (D4H-MSEP) and boron-modified polydimethylsiloxane (PDMS-B), which were synthesized and utilized as synergistic adhesion promoters to provide two-component addition-cured liquid silicone rubber (LSR) with a good self-adhesion ability for applications in electronic packaging at moderate temperatures. The chemical structures of D4H-MSEP and PDMS-B were characterized by Fourier transform infrared spectroscopy. The mass percentage of PDMS-B to D4H-MSEP, the adhesion promoters content and the curing temperature on the adhesion strength of LSR towards substrates were systematically investigated. In detail, the LSR with 2.0 wt% D4H-MSEP and 0.6 wt% PDMS-B exhibited a lap-shear strength of 1.12 MPa towards Al plates when curing at 80 °C, and the cohesive failure was also observed. The LSR presented a thermal conductivity of 1.59 W m-1 K-1 and good fluidity, which provided a sufficient heat dissipation ability and fluidity for potting applications with 85.7 wt% loading of spherical α-Al2O3. Importantly, 85 °C and 85% relative humidity durability testing demonstrated LSR with a good encapsulation capacity in long-term processes. This strategy endows LSR with a good self-adhesive ability at moderate temperatures, making it a promising material requiring long-term reliability in the encapsulation of temperature-sensitive electronic devices.

Promoters for Improved Adhesion Strength between Addition-Cured Liquid Silicone Rubber and Low-Melting-Point Thermoplastic Polyurethanes.

A polydimethylsiloxane armed with epoxy, alkoxy and acrylate groups was synthesized from silanol terminated-PDMS and epoxy and acrylate groups functionalized silane coupling agents, and utilized as the adhesion promoter (AP) to prepare addition-cured liquid silicone rubber that exhibited self-adhesion ability (SA-LSR) with biocompatible thermoplastic polyurethanes (TPU) sheets. The structural characteristics of AP were characterized by Fourier transform infrared (FTIR) spectroscopy, which demonstrated the strong adhesion to polyester-based TPU sheets due to a sufficient amount of acrylate groups, epoxy groups and silanol groups obtained by the hydrolysis of alkoxy groups. In detail, the peel-off strength of SA-LSR and TPU joints reached up to 7.63 N mm-1 after the optimization of adhesion promoter including type and content, and curing condition including time and temperature. The cohesive failure was achieved during the sample breakage process. Moreover, the SA-LSR showed a good storage stability under proper storage conditions. This design strategy provided the feasibility to combine the advantages of addition-cured liquid silicone rubber and plastics with low melting points, promoting the potential application range of those silicone-based materials.

Purification of quantum dot-based bioprobes via high-performance size exclusion chromatography.

Due to excellent optical properties, quantum dots (QDs) have been widely applied to sensing, labeling, and imaging. For the fabrication of QD-based bioprobes, purification is usually the crucial step. Hydrophilic octylamine grafted polyacrylic acid modified QDs (OPA-QDs) were prepared, and purified by high-performance size exclusion chromatography (HPSEC) to remove excess OPA and aggregated QDs. The percentage of suspended agglomerates of OPA-QDs in the unpurified OPA-QDs increases from 4% to 31% through a year, but the purified OPA-QDs of the same batch possess excellent colloidal stability for at least one year. Subsequently, QD-based bioprobes were fabricated by the conjugation between QDs and streptavidin (SA) or antibody (IgG), generating QD-SA and QD-IgG, respectively, which were purified via HPSEC. Finally, the resulting QD-SA and QD-IgG were adopted to detect tumour markers on slices and showed specific positive signals without nonspecific adsorption, which was contrary to the unpurified QD-IgG. Thus, the HPSEC-coupled system proposed in the current work is potent and universal for the generation of purified and monodisperse QD-based bioprobes, which is promising in the nanobiodetection field.

Synergistic strengthening of polyelectrolyte complex membranes by functionalized carbon nanotubes and metal ions.

Hydrophilic polymers have garnered much attention due to their critical roles in various applications such as molecular separation membranes, bio-interfaces, and surface engineering. However, a long-standing problem is that their mechanical properties usually deteriorate at high relative humidity (RH). Through the simultaneous incorporation of functionalized carbon nanotubes and copper ions (Cu(2+)), this study introduces a facile method to fabricate high strength polyelectrolyte complex nanohybrid membranes resistant to high RH (90%). For example, the tensile strength of the nanohybrid membranes is 55 MPa at 90% RH (80% of the original value at 30% RH). These results are explained by copper ions depressing the swelling degree of the membrane, and functionalized carbon nanotubes promoting stress transfer between the polymer matrix and them. The nanohybrid membranes are efficient in separating water/alcohol mixtures containing relatively high water content (up to 30 wt%), whereas common hydrophilic polymer membranes usually suffer from excessive swelling under this condition.