IrSn Bimetallic Clusters Confined in MFI Zeolites for CO Selective Catalytic Reduction of NOx in the Presence of Excess O2.

We developed a simple strategy for preparing IrSn bimetallic clusters encapsulated in pure silicon zeolites via a one-pot hydrothermal synthesis by using diethylamine as a stabilizing agent. A series of investigations verified that metal species have been confined successfully in the inner of MFI zeolites. IrSn bimetallic cluster catalysts were efficient for the CO selective catalytic reduction of NOx in the presence of excess O2. Furthermore, the 13CO temperature-programmed surface reaction results demonstrated that NO2 and N2O could form when most of the CO was transformed into CO2 and that Sn modification could passivate CO oxidation on the IrSn bimetallic clusters, leading to more reductants that could be used for NOx reduction at high temperatures. Furthermore, SO2 can also influence the NOx conversion by inhibiting the oxidation of CO. This study provides a new strategy for preparing efficient environmental catalysts with a high dispersion of metal species.

High-Efficiency Electrocatalytic Reduction of N2O with Single-Atom Cu Supported on Nitrogen-Doped Carbon.

Nitrous oxide (N2O) is a potent greenhouse gas with a high global warming potential, emphasizing the critical need to develop efficient elimination methods. Electrocatalytic N2O reduction reaction (N2ORR) stands out as a promising approach, offering room temperature conversion of N2O to N2 without the production of NOx byproducts. In this study, we present the synthesis of a copper-based single-atom catalyst featuring atomic Cu on nitrogen-doped carbon black (Cu1-NCB). Attributed to the highly dispersed single-atom Cu sites and the effective suppression of the hydrogen evolution reaction, Cu1-NCB demonstrated an optimal N2 faradaic efficiency (82.1%) and yield rate (3.53 mmol h-1 mgmetal-1) at -0.2 and -0.5 V vs RHE, respectively, outperforming previously reported N2ORR electrocatalysts. Further, a gas diffusion electrode cell was employed to improve mass transfer and achieved a 28.6% conversion rate of 30% N2O with only a 14 s residence time, demonstrating the potential for practical application. Density functional theory calculations identified Cu-N4 as the crucial active site for N2ORR, highlighting the significance of the unsaturated coordination and metal-support electronic structure. O-terminal adsorption of N2O was favored, and the dissociative adsorption (*ON2 → *O + N2) was the rate-determining step. These findings reveal the broad prospects of N2O decomposition via electrocatalysis.

Unveiling the Function of Oxygen Vacancy on Facet-Dependent CeO2 for the Catalytic Destruction of Monochloromethane: Guidance for Industrial Catalyst Design.

Secondary pollution remains a critical challenge for the catalytic destruction of chlorinated volatile organic compounds (CVOCs). By employing experimental studies and theoretical calculations, we provide valuable insights into the catalytic behaviors exhibited by ceria rods, cubes, and octahedra for monochloromethane (MCM) destruction, shedding light on the elementary reactions over facet-dependent CeO2. Our findings demonstrate that CeO2 nanorods with the (110) facet exhibit the best performance in MCM destruction, and the role of vacancies is mainly to form a longer distance (4.63 Å) of frustrated Lewis pairs (FLPs) compared to the stoichiometric surface, thereby enhancing the activation of MCM molecules. Subsequent molecular orbital analysis showed that the adsorption of MCM mainly transferred electrons from the 3σ and 4π* orbitals to the Ce 4f orbitals, and the activation was mainly caused by weakening of the 3σ bonding orbitals. Furthermore, isotopic experiments and theoretical calculations demonstrated that the hydrogen chloride generated is mainly derived from methyl in MCM rather than from water, and the primary function of water is to form excess saturated H on the surface, facilitating the desorption of generated hydrogen chloride.

Surface-Phosphorylated Ceria for Chlorine-Tolerance Catalysis.

An improved fundamental understanding of active site structures can unlock opportunities for catalysis from conceptual design to industrial practice. Herein, we present the computational discovery and experimental demonstration of a highly active surface-phosphorylated ceria catalyst that exhibits robust chlorine tolerance for catalysis. Ab initio molecular dynamics (AIMD) calculations and in situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) identified a predominantly HPO4 active structure on CeO2(110) and CeO2(111) facets at room temperature. Importantly, further elevating the temperature led to a unique hydrogen (H) atom hopping between coordinatively unsaturated oxygen and the adjacent P═O group of HPO4. Such a mobile H on the catalyst surface can effectively quench the chlorine radicals (Cl•) via an orientated reaction analogous to hydrogen atom transfer (HAT), enabling the surface-phosphorylated CeO2-supported monolithic catalyst to exhibit both expected activity and stability for over 68 days during a pilot test, catalyzing the destruction of a complex chlorinated volatile organic compound industrial off-gas.

Effects of Ionic Interferents on Electrocatalytic Nitrate Reduction: Mechanistic Insight.

Nitrate, a prevalent water pollutant, poses substantial public health concerns and environmental risks. Electrochemical reduction of nitrate (eNO3RR) has emerged as an effective alternative to conventional biological treatments. While extensive lab work has focused on designing efficient electrocatalysts, implementation of eNO3RR in practical wastewater settings requires careful consideration of the effects of various constituents in real wastewater. In this critical review, we examine the interference of ionic species commonly encountered in electrocatalytic systems and universally present in wastewater, such as halogen ions, alkali metal cations, and other divalent/trivalent ions (Ca2+, Mg2+, HCO3-/CO32-, SO42-, and PO43-). Notably, we categorize and discuss the interfering mechanisms into four groups: (1) loss of active catalytic sites caused by competitive adsorption and precipitation, (2) electrostatic interactions in the electric double layer (EDL), including ion pairs and the shielding effect, (3) effects on the selectivity of N intermediates and final products (N2 or NH3), and (4) complications by the hydrogen evolution reaction (HER) and localized pH on the cathode surface. Finally, we summarize the competition among different mechanisms and propose future directions for a deeper mechanistic understanding of ionic impacts on eNO3RR.

Electrochemical Reduction of Flue Gas Denitrification Wastewater to Ammonia Using a Dual-Defective Cu2O@Cu Heterojunction Electrode.

Wet flue gas denitrification offers a new route to convert industrial nitrogen oxides (NOx) into highly concentrated nitrate wastewater, from which the nitrogen resource can be recovered to ammonia (NH3) via electrochemical nitrate reduction reactions (NITRRs). Low-cost, scalable, and efficient cathodic materials need to be developed to enhance the NH3 production rate. Here, in situ electrodeposition was adopted to fabricate a foamy Cu-based heterojunction electrode containing both Cu-defects and oxygen vacancy loaded Cu2O (OVs-Cu2O), which achieved an NH3 yield rate of 3.59 mmol h-1 cm-2, NH3 Faradaic efficiency of 99.5%, and NH3 selectivity of 100%. Characterizations and theoretical calculations unveiled that the Cu-defects and OVs-Cu2O heterojunction boosted the H* yield, suppressed the hydrogen evolution reaction (HER), and served as dual reaction sites to coherently match the tandem reactions kinetics of NO3-to-NO2 and NO2-to-NH3. An integrated system was further built to combine wet flue gas denitrification and desulfurization, simultaneously converting NO and SO2 to produce the (NH4)2SO4 fertilizer. This study offers new insights into the application of low-cost Cu-based cathode for electrochemically driven wet denitrification wastewater valorization.

SLA2 is a prognostic marker in HNSCC and correlates with immune cell infiltration in the tumor microenvironment.

PURPOSE: To investigate Src-like adaptor 2 gene (SLA2) expression in head and neck squamous cell carcinoma (HNSCC), its potential prognostic value, and its effect on immune cell infiltration. METHODS: Through a variety of bioinformatics analyses, we extracted and analyzed data sets from the Cancer Genome Atlas (TCGA), Tumor Immune Estimation Resource (TIMER), and Gene Expression Profile Interaction Analysis (GEPIA) to analyze the correlation between SLA2 and the prognosis, immune checkpoint, tumor microenvironment (TME) and immune cell infiltration of HNSCC, and to explore its potential oncogenic mechanism. To further explore the potential role of SLA2 in HNSCC by Gene ontology (GO) functional annotation and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis. RESULTS: SLA2 messenger ribonucleic acid (mRNA) levels were increased in HNSCC tumor tissues compared with normal tissues. In addition, we found that SLA2 may be an independent prognostic factor for HNSCC, and high SLA2 expression is associated with favorable prognosis in HNSCC. SLA2 expression was positively correlated with B cells, cluster of differentiation 8-positive T cells (CD8 + T cells), cluster of differentiation 4-positive T cells (CD4 + T cells), macrophages, neutrophil and dendritic cells infiltration. SLA2 has also been shown to co-express immune-related genes and immune checkpoints. Significant GO term analysis by Gene Set Enrichment Analysis (GSEA) indicated that genes correlated with SLA2 were located mainly in the side of membrane, receptor complex, secretory granule membrane, endocytic vesicle, membrane region, and endosome membrane, where they were involved in leukocyte cell-cell adhesion, response to interferon-gamma, and regulation of immune effector process. These related genes also served as antigen binding, cytokine receptor activity, phosphatidylinositol 3-kinase activity, peptide receptor activity, Src homology domain 3 (SH3) domain binding, and cytokine receptor binding. KEGG pathway analysis demonstrated that these genes related to SLA2 were mainly enriched in signal pathways, such as hematopoietic cell lineage, cell adhesion molecules (CAMs), natural killer cell mediated cytotoxicity, measles, and chemokine signaling pathway. CONCLUSIONS: SLA2 is increased in HNSCC, and high SLA2 expression is associated with favorable prognosis. SLA2 may affect tumor development by regulating tumor infiltrating cells in TME. SLA2 may be a potential target for immunotherapy.

CELSR3 is a prognostic marker in HNSCC and correlates with immune cell infiltration in the tumor microenvironment.

PURPOSE: To look at the diagnostic value of the CELSR receptor 3 (CELSR3) gene in head and neck squamous cell carcinoma (HNSCC) and its effect on tumor immune invasion, which is important for enhancing HNSCC treatment. METHODS: Several bioinformatics tools were employed to investigate CELSR3's putative oncogenic pathway in HNSCC, and datasets from The Tumor Genome Atlas (TCGA), Tumor Immune Estimation Resource (TIMER), Gene Expression Profile Interaction Analysis (GEPIA) and LinkedOmics were extracted and evaluated. CELSR3 has been linked to tumor immune cell infiltration, immunological checkpoints, and immune-related genes. CELSR3's putative roles were investigated using Gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and pathway enrichment analysis. The expression level of CELSR3 in HNSCC tissues and cells was detected by RT-qPCR. The effects of CELSR3 on proliferation of HNSCC cells were detected by CCK-8 assay. RESULTS: CELSR3 was shown to be expressed differently in different types of cancer and normal tissues. CELSR3 gene expression was linked to pN-stage and pM-stage. Patients with high CELSR3 expression also have a well prognosis. CELSR3 expression was found to be an independent predictive factor for HNSCC in both univariate and multivariate Cox regression analyses. We discovered the functional network of CELSR3 in HNSCC using GO and KEGG analysis. CELSR3 expression levels were found to be favorably associated with immune cell infiltration levels. Furthermore, CELSR3 expression levels were significantly correlated with the expression levels of many immune molecules, such as MHC genes, immune activation genes, chemokine receptors, and chemokines. CELSR3 is highly expressed in HNSCC tissues and cells. CELSR3 overexpression significantly inhibited the proliferation of HNSCC cells. CELSR3 expression may affect the immune microenvironment and, as a result, the prognosis of HNSCC. CONCLUSION: CELSR3 expression is elevated in HNSCC tumor tissues, and high CELSR3 expression is associated with well prognosis, which inhibited the proliferation of NHSCC cells. CELSR3 has the potential to influence tumor formation by controlling tumor-infiltrating cells in the tumor microenvironment (TME). As a result, CELSR3 may have diagnostic significance in HNSCC.

Lean methane combustion over zeolite-supported Pd catalysts: Structure-performance relationship and deactivation mechanism.

Zeolites are a promising support for Pd catalysts in lean methane (CH4) combustion. Herein, three types of zeolites (H-MOR, H-ZSM-5 and H-Y) were selected to estimate their structural effects and deactivation mechanisms in CH4 combustion. We show that variations in zeolite structure and surface acidity led to distinct changes in Pd states. Pd/H-MOR with external high-dispersing Pd nanoparticles exhibited the best apparent activity, with activation energy (Ea) at 73 kJ/mol, while Pd/H-ZSM-5 displayed the highest turnover frequency (TOF) at 19.6 × 10-3 sec-1, presumably owing to its large particles with more step sites providing active sites in one particle for CH4 activation. Pd/H-Y with dispersed PdO within pore channels and/or Pd2+ ions on ion-exchange sites yielded the lowest apparent activity and TOF. Furthermore, Pd/H-MOR and Pd/H-ZSM-5 were both stable under a dry condition, but introducing 3 vol.% H2O caused the CH4 conversion rate on Pd/H-MOR drop from 100% to 63% and that on Pd/H-ZSM-5 decreased remarkably from 82% to 36%. The former was shown to originate from zeolite structural dealumination, and the latter principally owed to Pd aggregation and the loss of active PdO.

Photocatalytic Oxidative Coupling of Methane to Ethane Using Water and Oxygen on Ag3PO4-ZnO.

Photocatalytic oxidative coupling is an effective way of converting CH4 to high-value-added multi-carbon chemicals under mild conditions, where the breaking of the C-H bond is the main rate-limiting step. In this paper, the Ag3PO4-ZnO heterostructure photocatalyst was synthesized for photocatalytic oxidative coupling of methane (OCM) to C2H6. In addition, an excellent C2H6 yield (16.62 mmol g-1 h-1) and a remarkable apparent quantum yield (15.8% at 350 nm) at 49:1 CH4/Air and 20% RH are obtained, which is more than three times that of the state-of-the-art photocatalytic systems. Ag3PO4 improves the adsorption and dissociation ability of O2 and H2O, benefiting the formation of surface hydroxyl species. As a result, the C-H bond activation energy of CH4 on ZnO was obviously reduced. Meanwhile, the improved separation of photogenerated carriers on the Ag3PO4-ZnO heterostructure also accelerates the OCM process. Moreover, Ag nanoparticles (NPs) derived from Ag3PO4 reduction by photoelectrons promote the coupling of *CH3, which can inhibit the overoxidation of CH4 and increase C2H6 selectivity. This research provides a guide for the design of catalyst and reaction systems in the photocatalytic OCM process.

Simultaneous Generation of Ammonia during Nitrile Waste Gas Purification over a Silver Single-Atom-Doped Ceria Catalyst.

Catalytic elimination of toxic nitrile waste gas is of great significance for preserving the atmospheric environment, but achieving resource utilization during its destruction has been less explored. Herein, this study proposed a universal strategy for nitrile waste gas purification and NH3 generation simultaneously. The developed silver single-atom-doped ceria nanorod (Ag1/R-CeO2) was endowed with near complete mineralization and around 90% NH3 yield at 300-350 °C for the catalytic oxidation of both acetonitrile and acrylonitrile. The introduction of the Ag single atom created more surface oxygen vacancies, thereby promoting water activation to form abundant surface hydroxyl groups. As a benefit from this, the hydrolysis reaction of nitrile to generate NH3 was accelerated. Meanwhile, the electron transfer effect from the Ag atom to Ce and hydroxyl species facilitated NH3 desorption, which inhibited the oxidation of NH3. Moreover, the increased surface oxygen vacancies also promoted the mineralization of hydrolysis carbonaceous intermediates to CO2. In contrast, the Ag nanoparticle-modified sample possessed stronger reducibility and NH3 adsorption, leading to the excessive oxidation of NH3 to N2 and NOx. This work provided a useful guidance for resourceful purification of nitrile waste gas.

Highly Selective Nitrite Hydrogenation to Ammonia over Iridium Nanoclusters: Competitive Adsorption Mechanism.

Wet denitrification is a promising approach to control nitrogen oxides (NOx) produced in fossil fuel combustion. Yet, the highly concentrated nitrite (NO2-) wastewater generated poses a major threat to the aqueous environment. Here, iridium nanoclusters (d = 1.63 nm) deposited on TiO2 were applied for NO2- reduction to ammonia (NRA), showing an exceptional NH4+ selectivity of 95% and a production rate of 20.51 mgN·L-1·h-1, which held significant potential for NO2- wastewater purification and ammonia resource recovery. Notably, an interesting non-first-order NO2- hydrogenation kinetics was observed, which was further confirmed to result from the competitive adsorption mechanism between H2 and NO2- over iridium. The NRA pathways on the Ir(111) surface were explored via density functional theory calculations with the NO2-* → NO* → HNO* → HNOH* → H2NOH* → NH2* → NH3* identified as the most energetically favorable pathway and the NO* → HNO* confirmed as the rate-determining step. In situ DRIFTS further experimentally verified the generation of HNO* intermediate during NO* hydrogenation on Ir(111). To verify NRA kinetics at varied NO2- concentrations or H2 pressures, a kinetic model was derived based on the Langmuir-Hinshelwood competitive adsorption mechanism. These findings provide mechanistic insights into the NRA pathways on Ir nanocatalysts, which will be beneficial for wet denitrification waste stream decontamination and valorization.

Polymerization State of Vanadyl Species Affects the Catalytic Activity and Arsenic Resistance of the V2O5-WO3/TiO2 Catalyst in Multipollutant Control of NOx and Chlorinated Aromatics.

The conventional V2O5-WO3/TiO2 catalyst suffers severely from arsenic poisoning, leading to a significant loss of catalytic activity. The doping of Al or Mo plays an important role in promoting the arsenic resistance on NH3 selective catalytic reduction (NH3-SCR), but their promotion mechanism remains in debate and has yet to be explored in multipollutant control (MPC) of NOx and chlorinated organics. Herein, our experimental characterizations and density functional theory (DFT) calculations confirmed that arsenic species preferentially adsorb on both Al and Mo to form arsenate, thereby avoiding bonding to the catalytically active V sites. More importantly, Al doping partially converted the polymeric vanadyl species into monomeric ones, thereby inhibiting the near-surface and bulk lattice oxygen mobility of the V2O5-WO3/TiO2 catalyst, while Mo doping resulted in vanadyl polymerization with an enriched V5+ chemical state and exhibited superior MPC activity and COx selectivity. Our work shows that antipoisoning catalysts can be designed with the combination of site protection and occurrence state modification of the active species.

Insight into the Mechanism of Selective Catalytic Reduction of NO by CO over a Bimetallic IrRu/ZSM-5 Catalyst in the Absence/Presence of O2 by Isotopic C13O Tracing Methods.

The development of efficient catalysts for the selective catalytic reduction of NO by CO (CO-SCR) in the presence of O2 is highly desirable for controlling the emission of toxic gases from tailpipes. Here, a bimetallic IrRu/ZSM-5 catalyst was prepared for the selective catalytic reduction of NO by CO in the presence of O2 (5%) for the low-temperature treatment of exhaust gas. IrRu/ZSM-5 afforded 90% NOx conversion in the range of 225-250 °C and maintained 90% NOx conversion after 12 h of reaction. Ru addition inhibited agglomeration of the Ir particles during the reduction process and provided more active sites for NO adsorption. Isotopic C13O tracing and in situ diffuse reflectance infrared Fourier-transform spectroscopy experiments were used to elucidate the CO-SCR mechanism in the absence or presence of O2. NCO could easily form on the surface of catalysts in the absence of O2, whereas NCO formation has been inhibited owing to the quick consumption of CO in the presence of O2. Moreover, some byproducts such as N2O and NO2 are generated in the presence of O2. Finally, a possible mechanism for CO-SCR under different conditions was proposed based on in situ experiments and physicochemical analyses.

Single-Atom Catalysts in Environmental Engineering: Progress, Outlook and Challenges.

Recently, single-atom catalysts (SACs) have attracted wide attention in the field of environmental engineering. Compared with their nanoparticle counterparts, SACs possess high atomic efficiency, unique catalytic activity, and selectivity. This review summarizes recent studies on the environmental remediation applications of SACs in (1) gaseous: volatile organic compounds (VOCs) treatment, NOx reduction, CO2 reduction, and CO oxidation; (2) aqueous: Fenton-like advanced oxidation processes (AOPs), hydrodehalogenation, and nitrate/nitrite reduction. We present the treatment activities and reaction mechanisms of various SACs and propose challenges and future opportunities. We believe that this review will provide constructive inspiration and direction for future SAC research in environmental engineering.

Long-term variation and evaluation of air quality across Hong Kong.

Study of Air Quality Objectives (AQOs) and long-term changes of air pollution plays a decisive role in formulating and refining pollution control strategies. In this study, 10-year variations of six major air pollutants were analyzed at seven monitoring sites in Hong Kong. The continuous decrease of annual averaged concentrations of NO2, SO2, CO, PM2.5 and PM10 and numbers of days with severe pollution conditions validated the efficiency of the series of air pollution control schemes implemented by the Hong Kong government. However, there is still a big gap to meet the ultimate targets described by the World Health Organization. Besides, the concentration of O3 at roadside and urban stations increased by 135% ± 25% and 37% ± 18% from 2011 to 2020, respectively, meanwhile the highest 8 hr averaged O3 concentration was observed as 294 µg/m3 at background station in 2020, which pointed out the increasing ozone pollution in Hong Kong. There was a great decrease in the annual times of air quality health index (AQHI) laying in "high", "very high" and "serious" categories from 2011 to 2020 with the decrease rate of 89.70%, 91.30% and 89.74% at roadside stations, and 79.03%, 95.98% and 72.73% at urban stations, respectively. Nevertheless, the number of days categorized as "high" or above at roadside station was twice more than that in the urban station during the past ten years. Thus, more policies and attentions should be given to the roadside air quality and its adverse health effect to pedestrians on street.

Catalytic destruction of chlorobenzene over K-OMS-2: Inhibition of high toxic byproducts via phosphate modification.

In the process of catalytic destruction of chlorinated volatile organic compounds (CVOCs), the catalyst is prone to chlorine poisoning and produce polychlorinated byproducts with high toxicity and persistence, bringing great risk to atmospheric environment and human health. To solve these problems, this work applied phosphate to modify K-OMS-2 catalysts. The physicochemical properties of catalysts were determined by using X-ray powder diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), hydrogen temperature programmed reduction (H2-TPR), pyridine adsorption Fourier-transform infrared (Py-IR) and water temperature programmed desorption (H2O-TPD), and chlorobenzene was selected as a model pollutant to explore the catalytic performance and byproduct inhibition function of phosphating. Experimental results revealed that 1 wt.% phosphate modification yielded the best catalytic activity for chlorobenzene destruction, with the 90% conversion (T90) at approximately 247°C. The phosphating significantly decreased the types and yields of polychlorinated byproducts in effluent. After phosphating, we observed significant hydroxyl groups on catalyst surface, and the active center was transformed into Mn(IV)-O…H, which promoted the formation of HCl, and enhanced the dechlorination process. Furthermore, the enriched Lewis acid sites by phosphating profoundly enhanced the deep oxidation ability of the catalyst, which promoted a rapid oxidation of reaction intermediates, so as to reduce byproducts generation. This study provided an effective strategy for inhibiting the toxic byproducts for the catalytic destruction of chlorinated organics.

Photocatalytic Oxidative Coupling of Methane over Au1 Ag Single-Atom Alloy Modified ZnO with Oxygen and Water Vapor: Synergy of Gold and Silver.

C-H dissociation and C-C coupling are two key steps in converting CH4 into multi-carbon compounds. Here we report a synergy of Au and Ag to greatly promote C2 H6 formation over Au1 Ag single-atom alloy nanoparticles (Au1 Ag NPs)-modified ZnO catalyst via photocatalytic oxidative coupling of methane (POCM) with O2 and H2 O. Atomically dispersed Au in Au1 Ag NPs effectively promotes the dissociation of O2 and H2 O into *OOH, promoting C-H activation of CH4 on the photogenerated O- to form *CH3 . Electron-deficient Au single atoms, as hopping ladders, also facilitate the migration of electron donor *CH3 from ZnO to Au1 Ag NPs. Finally, *CH3 coupling can readily occur on Ag atoms of Au1 Ag NPs. An excellent C2 H6 yield of 14.0 mmol g-1 h-1 with a selectivity of 79 % and an apparent quantum yield of 14.6 % at 350 nm is obtained via POCM with O2 and H2 O, which is at least two times that of the photocatalytic system. The bimetallic synergistic strategy offers guidance for future catalyst design for POCM with O2 and H2 O.

Palladium Encapsulated by an Oxygen-Saturated TiO2 Overlayer for Low-Temperature SO2 -Tolerant Catalysis during CO Oxidation.

The development of oxidation catalysts that are resistant to sulfur poisoning is crucial for extending the lifespan of catalysts in real-working conditions. Herein, we describe the design and synthesis of oxide-metal interaction (OMI) catalyst under oxidative atmospheres. By using organic coated TiO2 , an oxide/metal inverse catalyst with non-classical oxygen-saturated TiO2 overlayers were obtained at relatively low temperature. These catalysts were found to incorporate ultra-small Pd metal and support particles with exceptional reactivity and stability for CO oxidation (under 21 vol % O2 and 10 vol % H2 O). In particular, the core (Pd)-shell (TiO2 ) structured OMI catalyst exhibited excellent resistance to SO2 poisoning, yielding robust CO oxidation performance at 120 °C for 240 h (at 100 ppm SO2 and 10 vol % H2 O). The stability of this new OMI catalyst was explained through density functional theory (DFT) calculations that interfacial oxygen atoms at Pd-O-Ti sites (of oxygen-saturated overlayers) serve as non-metal active sites for low-temperature CO oxidation, and change the SO2 adsorption from metal(d)-to-SO2 (π*) back-bonding to much weaker σ(Ti-S) bonding.

Selective Ru Adsorption on SnO2/CeO2 Mixed Oxides for Efficient Destruction of Multicomponent Volatile Organic Compounds: From Laboratory to Practical Possibility.

Ru-based catalysts have been extensively employed for the catalytic destruction of chlorinated volatile organic compounds (VOCs), but their versatility for other routine VOCs' destruction has been less explored. Herein, we show that Ru-decorated SnO2/CeO2 mixed oxides can sustain H2O and HCl poisonings and are endowed with extraordinary versatility for a wide range of VOCs' destruction. Selective adsorption of Ru on the cassiterite SnO2 and CeO2 nanorods through a Coulomb force can rationally tune the oxidation and dechlorination centers on decorated catalysts, where the epitaxial growth of RuOx on top of SnO2 is endowed with excellent dechlorination ability and that on CeO2 is functional as an oxidation center; the latter could also activate H2O to provide sufficient H protons for HCl formation. Our developed Ru/SnO2/CeO2 catalyst can steadily destruct mono-chlorobenzene, ortho-dichlorobenzene, trichloroethylene, dichloromethane, epichlorohydrin, N-hexane, ethyl acetate, toluene, and their mixtures at an optimum temperature of 300 °C, and its monolithic form is also functional at this temperature with few dioxins being detected in the off-gas. Our results imply that the Ru-decorated SnO2/CeO2 catalyst can meet the demands of regenerative catalytic oxidation for the treatment of a wide range of VOCs from industrial exhausts.