Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels.

Microalgae have been renowned as the most promising energy organism with significant potential in carbon fixation. In the large-scale cultivation of microalgae, the 3D porous substrate with higher specific surface area is favorable to microalgae adsorption and biofilm formation, whereas difficult for biofilm detachment and microalgae harvesting. To solve this contradiction, N-isopropylacrylamide, a temperature-responsive gels material, was grafted onto the inner surface of the 3D porous substrate to form temperature-controllable interface wettability. The interfacial free energy between microalgae biofilm and the substrates increased from -63.02 mJ/m2 to -31.89 mJ/m2 when temperature was lowered from 32 °C to 17 °C, weakening the adsorption capacity of cells to the surface, and making the biofilm detachment ratio increased to 50.8%. When further cooling the environmental temperature to 4 °C, the detachment capability of microalgae biofilm kept growing. 91.6% of the cells in the biofilm were harvesting from the 3D porous substrate. And the biofilm detached rate was up to 19.84 g/m2/h, realizing the temperature-controlled microalgae biofilm harvesting. But, microalgae growth results in the secretion of extracellular polymeric substances (EPS), which enhanced biofilm adhesion and made cell detachment more difficult. Thus, ultrasonic vibration was used to reinforce biofilm detachment. With the help of ultrasonic vibration, microalgae biofilm detached rate increased by 143.45% to 41.07 g/m2/h. These findings provide a solid foundation for further development of microalgae biofilm detachment and harvesting technology.

Temperature-controlled microalgae biofilm adsorption/desorption in a thermo-responsive light-guided 3D porous photo-bioreactor for CO2 fixation.

Microalgae biofilm-based culture provides an efficient CO2 reduction and wastewater treatment method for its high photosynthetic efficiency and density. As supporting substrates for microalgae biofilm, porous materials have a big available adsorption area, but mutual shading makes it difficult to transmit external light to the internal surface for attached cells' photosynthesis. Thus, light-guided particles (SiO2) were introduced into photosensitive resin to fabricate a light-guided ordered porous photobioreactor (PBR) by 3D printing technology in this study. The space utilization of the PBR was significantly enhanced and the effective microalgae adsorption area was increased by 13.6 times. Further, a thermo-responsive hydrogel was grafted onto the surface of the substrate to form a smart temperature-controllable interface that could enhance microalgae adsorption and desorption in both directions. When the thermo-responsive layer received light, it would generate heat due to the hydrogel's photo-thermal effect. And the surface temperature would then raise to 33 °C, higher than the hydrogel phase transition point of 32 °C, making the surface shrinking and more hydrophobicity for microalgae cells attachment. The microalgae cells' adsorption capacity increased by 103%, resulting in a high microalgae growth rate of 3.572 g m-2 d-1. When turning off the light, the surface temperature would cool down to below 20 °C, the surface would shrink. And the biofilm shows a 564.7% increase in desorption ability, realizing temperature-controlled microalgae harvesting.

Anti-GPIb/IX autoantibodies are associated with poor response to dexamethasone combined with rituximab therapy in primary immune thrombocytopenia patients.

This retrospective study aimed to evaluate whether anti-glycoproteins (GPs) autoantibodies can be used as predictors of response to high-dose dexamethasone combined with rituximab (DXM-RTX) in the treatment of primary immune thrombocytopenia (ITP) patients. One-hundred twenty-six ITP patients were included and retrospectively analyzed, 66.7% of anti-GPIb/IX and 65.9% of anti-GPIIb/IIIa autoantibodies. Results showed that overall response (OR) and complete response (CR) rates of patients without anti-GPIb/IX autoantibodies to DXM-RTX were significantly higher than those with anti-GPIb/IX autoantibodies at 4 weeks (OR: 73.8% vs. 47.6%, CR: 50.0% vs. 26.2%; P < 0.05) and 6 months (OR: 71.4% vs. 45.2%, CR: 42.9% vs. 25.0%; P < .05). Furthermore, patients with anti-GPIb/IX single-positivity exhibited higher resistance to DXM-RTX than patients with anti-GPIIb/IIIa single-positivity at 4 weeks (OR: 37.5% vs. 78.3%; P < .05) and 6 months (OR: 29.2% vs. 78.3%; P < .05). Multivariable logistic regression analysis revealed that anti-GPIb/IX autoantibodies and megakaryocytes were associated with the OR rate of patients at both 4 weeks and 6 months, and anti-GPIb/IX autoantibodies at 4 weeks represented the only significant factor affecting OR rate with DXM-RTX (F = 9.128, P = .003). Therefore, platelet anti-GPIb/IX autoantibodies might predict poor response to DXM-RTX in ITP patients.

What is the context?The safety and efficacy of high-dose dexamethasone combined with rituximab (DXM-RTX) in the treatment of primary immune thrombocytopenia (ITP) are gradually recognized; however, there still needs to be an adequate clinical trial to predict its efficacy. Autoantibodies against platelet glycoproteins (GPs) are proven to be associated with a variety of therapeutic responses in ITP. Such as anti-GPIb/IX autoantibodies predict poor response to intravenous immunoglobulin G therapy and rhTPO therapy in ITP patients. Therefore, a retrospective study was needed to verify whether anti-GP autoantibodies can expect a response to DXM-RTX therapy in ITP patients.What is new?This study identified that anti-GPIb/IX autoantibodies were a predictive factor for poor response to DXM-RTX in ITP patients. It mainly manifested in the following aspects: (1) Overall response (OR) and complete response (CR) rates of patients without anti-GPIb/IX autoantibodies to DXM-RTX were significantly higher than those with anti-GPIb/IX autoantibodies at four weeks and six months. (2) Multivariable logistic regression analysis revealed that anti-GPIb/IX autoantibodies at both four weeks and six months were associated with the OR rate of patients.What is the impact?Our study suggests that ITP patients with anti-GPIb/IX positive autoantibodies respond poorly to DXM-RTX therapy. Platelet anti-GPIb/IX autoantibodies might predict poor response to DXM-RTX therapy in ITP patients.

Comprehensive modeling and predicting light transmission in microalgal biofilm.

Biofilm-based microalgae culture combined with wastewater treatment is a promising biotechnology for environmental management. Light availability influences the accumulation of microalgal biomass and nutrient removal. A light attenuation model which comprehensively considered microalgal biofilm structure (density and biofilm thickness), pigments content, and extracellular polymeric substances content was developed to predict the light attenuation in biofilm according to the simplification of the radiative transfer equation. The predicted results were in good overall agreement with the experiment, with an average error of less than 9.02%. These factors (biofilm density, thickness, pigments content, and extracellular polymeric substances content) all contributed to the light intensity attenuation, but biofilm thickness caused the most dramatic attenuation under the same increment of relative change in actual culture. The scattering coefficient of the biofilm (0.433 m2/g) was less than that of the suspension (1.489 m2/g) under white incident light. It suggests that the dense structure of cells allows much light to be concentrated in the forward direction when transmitting. This model could be adopted to predict the light distribution in microalgal biofilm for the further design of efficient photobioreactors and the development of light optimization strategies.

Insight into the comprehensive effect of carbon dioxide, light intensity and glucose on heterotrophic-assisted phototrophic microalgae biofilm growth: A multifactorial kinetic model.

Heterotrophic-assisted photoautotrophic microalgae biofilm cultivation was an alternative way to realize CO2 reduction and wastewater treatment. Growth kinetics supplied a channel to better understand how the cultivation conditions affect microalgal growth and CO2 reduction. However, the two growth modes (heterotroph and photoautotroph) have different needs for organic and inorganic nutrients. Thus, combining the threshold theory and multiplication theory, an integral multifactorial kinetic model that looking insight into the comprehensive effect of glucose, CO2, light intensity, and nitrate was developed for heterotrophic-assisted photoautotrophic microalgae biofilm growth in this study. R2 between model and experiment was 0.99. It predicted the maximum specific growth rate and maximum CO2 consumption rate of heterotrophic-assisted photoautotrophic microalgae biofilm was 1.868 h-1 and 1.02 h-1, respectively. This model fully explained the influence of the main factors on microalgae biofilm growth and reasonably predicted the growth rate of microalgae biofilm under different growth conditions.

How Interfacial Properties Affect Adhesion: An Analysis from the Interactions between Microalgal Cells and Solid Substrates.

Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γs-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γs- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.

Microalgae cultivation for antibiotic oxytetracycline wastewater treatment.

Microalgae-based technology provides a potential approach to biologically treating oxytetracycline (OTC) wastewater due to its environmental friendliness, low cost, and high efficiency. However, the OTC degradation and transformation characteristics by microalgae are still unclear and need further exploration. This study used microalgae Chlorella sorokiniana MB-1 for OTC wastewater treatment. The OTC with an initial concentration less than 50 mg L-1 promoted microalgae growth, while OTC with a concentration higher than 100 mg L-1 inhibited microalgae growth significantly. More than 99% OTC was removed with the biomass productivity up to 1.8 g L-1 when treated OTC with 10 mg L-1 initial concentration for 7 days. Chlorophyll and total sugar contents decreased, while protein and lipid contents increased compared to the control without OTC. The malondialdehyde content firstly reduced but subsequently enhanced when increased OTC concentration, while superoxide dismutase content gradually enhanced, manifesting that traces of OTC stimulate microalgae antioxidant capacity, while the increasing OTC caused further oxidative damage to microalgae cells. The removal pathways of OTC mainly include photolysis (75.8%), biodegradation (17.8%), biosorption (3.6%), and hydrolysis (2.7%). Overall, removing OTC by microalgae was confirmed to be an excellent technology for treating antibiotics wastewater whilst accumulating microalgae biomass.

Arabinogalactan protein-rare earth element complexes activate plant endocytosis.

Endocytosis is essential to all eukaryotes, but how cargoes are selected for internalization remains poorly characterized. Extracellular cargoes are thought to be selected by transmembrane receptors that bind intracellular adaptors proteins to initiate endocytosis. Here, we report a mechanism for clathrin-mediated endocytosis (CME) of extracellular lanthanum [La(III)] cargoes, which requires extracellular arabinogalactan proteins (AGPs) that are anchored on the outer face of the plasma membrane. AGPs were colocalized with La(III) on the cell surface and in La(III)-induced endocytic vesicles in Arabidopsis leaf cells. Superresolution imaging showed that La(III) triggered AGP movement across the plasma membrane. AGPs were then colocalized and physically associated with the µ subunit of the intracellular adaptor protein 2 (AP2) complexes. The AGP-AP2 interaction was independent of CME, whereas AGP's internalization required CME and AP2. Moreover, we show that AGP-dependent endocytosis in the presence of La(III) also occurred in human cells. These findings indicate that extracellular AGPs act as conserved CME cargo receptors, thus challenging the current paradigm about endocytosis of extracellular cargoes.

The mutational landscape and prognostic indicators of pseudomyxoma peritonei originating from the ovary.

Pseudomyxoma peritonei (PMP) is a rare disorder with unique pathological and genetic changes. Although several studies have reported the clinical features and mutational changes of PMP that originates from the appendix, few studies on PMP originating from the ovary have been reported due to its extreme rarity. In order to characterize the somatic mutational landscape and to investigate the prognosis predicting factors of ovary-originating PMP, we examined 830 cases of PMP and identified 16 patients with PMP that originated from the ovary. Whole-exome sequencing (WES) was performed on 12 cases using formalin-fixed, paraffin-embedded (FFPE) tissue samples. We found that 25% (3/12) of the patients carried mutations in cancer driver genes, including TP53, ATM and SETD2, and 16.7% (2/12) of the patients carried mutations in cancer driver genes, including ATRX, EP300, FGFR2, KRAS, NOCR1 and RB1. The MUC16 (58.33%), BSN (41.67%), PCNT (41.67%), PPP2R5A (41.67%), PRSS36 (41.67%), PTPRK (41.67%) and SBF1 (41.67%) genes presented the highest mutational frequencies. The PI3K-Akt signaling pathway, human papillomavirus infection pathway, cell skeleton, cell adhesion, and extracellular matrix and membrane proteins were the major pathways or functions that were affected. Patients were followed up to 174 months (median: 48.26 months). The 5-year OS rate for all patients was 71.2% and the median OS was not reached. PTPRK mutations, presurgical CA199 level, completeness of cytoreduction (CCR) and peritoneal cancer index (PCI) were identified as potential predictive factors for patient survival. In conclusion, the mutational landscape for ovary-originating PMP was revealed and exhibited unique features distinct from appendix-originating PMP. PTPRK, CA199, CCR and PCI may predict patient survival.

Facile Synthesis of the Cu, N-CDs@GO-CS Hydrogel with Enhanced Antibacterial Activity for Effective Treatment of Wound Infection.

Drug resistance and increasing dangers during antibiotic treatment have brought a new eternal task for the research of effective antibacterial agents or therapeutics. In this work, we used Cu, N-doped carbon dots (Cu, N-CDs) to modify graphene oxide (GO) nanosheets and then loaded to chitosan (CS) hydrogels via electrostatic interaction to form Cu, N-CDs@GO-CS hydrogel nanoplatforms to treat Staphylococcus aureus and Escherichia coli. The excellent antibacterial activity is from the combined effects of hyperthermia and reactive oxygen species generated under near-infrared (NIR) laser irradiation of the Cu, N-CDs@GO-CS hydrogel, which shows excellent antibacterial activity compared with the CS hydrogel or the Cu, N-CDs@GO-CS hydrogel without NIR laser irradiation. Moreover, the inherent antibacterial nature of the CS hydrogel or the Cu, N-CDs@GO-CS hydrogel was used to treat bacteria-infected wounds in mice, which also protected the wound area from second infection. In vivo experiments demonstrate favorable wound healing results and have no significant harmful side effects to the major organs in mice. Overall, this work demonstrates that the antibacterial Cu, N-CDs@GO-CS hydrogel offers significant prospect as an antibacterial reagent for wound healing.

Thermoresponsive Surfaces Grafted by Shrinkable Hydrogel Poly(N-isopropylacrylamide) for Controlling Microalgae Cells Adhesion during Biofilm Cultivation.

Microalgae is a promising candidate for reducing greenhouse gas and producing renewable biofuels. For microalgae biofilm cultivation, a strong adhesion ability of microalgae cells onto the surface is a prerequisite to resist the fluid shear stress, while strong adhesion is not of benefit to the biofilm harvesting process. To solve this dilemma, a thermoresponsive surface (TMRS) with lower critical solution temperature of 33 °C was made by grafting N-isopropylacrylamide onto a silicate glass slide. The wettability of the TMRS changed from hydrophilic (contact angle of 59.4°) to hydrophobic (contact angle of 91.6°) when the temperature rose from 15 to 35 °C, resulting in the increase of adhesion energy of the TMRS to Chlorella vulgaris cells by 135.6%. The experiments showed that the cells were more likely to attach onto the TMRS at the higher temperature of 35 °C owing to the surface microstructures generated by the hydrogel layer shrinkage, which is similar in size to the microalgae cells. And the cell coverage rate on TMRS increased by 32% compared to the original glass surface. Conversely, the cells separate easily from the TMRS at a lower temperature of 15 °C, and the cell adhesion density was reduced by 19% due to hydrogel layer swelling to a relatively flat surface.

Layer-by-layer assembled PEI-based vector with the upconversion luminescence marker for gene delivery.

The upconversion luminescence (UCL) marker based on upconversion nanoparticles (UCNPs) shows unique advantages over traditional fluorescence markers, such as enhanced tissue penetration, better photostability, and less autofluorescence. Herein, we constructed a new UCL gene-delivery nonviral vector via layer-by-layer self-assembly of poly(ethylene imine) (PEI) with UCNPs. To reduce the cytotoxicity of PEI, citric acid (CA) was introduced for aqueous modification, and PEI assembly was introduced on the UCNP surface. Our data show that the nonviral vector for UCL gene-delivery demonstrates excellent photostability, low toxicity, and good stability under physiological or serum conditions and can strongly bind to DNA. Moreover, this UCL PEI-based vector could serve as a promising fluorescent gene-delivery carrier for theranostic applications.

Intrinsic Polarized Electric Field Induces a Storing Mechanism to Achieve Energy Storing Catalysis in V2 C MXene.

Efficient storage and separation of holes and electrons pose significant challenges for catalytic reactions, particularly in the context of single-phase catalysis. Herein, V2 C MXene, with its intrinsic polarized electric field, successfully overcomes this obstacle. To enhance hole storage, a multistep etching process is employed under reducing conditions to control the content of surface termination groups, thus exposing more defective active sites. The intrinsically polarized electric field confines holes to the surface of the layer and free electrons within the layer, leading to a lag in e- release compared to h+ . The quantities of stored holes and electrons are measured to be 18.13 µmol g-1 and 106.37 µmol g-1 , respectively. Under dark, V2 C demonstrates excellent and stable dark-catalytic performance, degrading 57.91% of tetracycline (TC 40 mg L-1 ) and removing 23% of total organic carbon (TOC) after 140 min. In simulated sunlight and near-infrared light, the corresponding degradation rates reach 72.24% and 79.54%, with corresponding TOC removal rates of 49% and 48%, respectively. The hole and electron induced localized surface plasmon resonance (LSPR) effects contribute to a long-lasting and enhanced broad-spectrum mineralization of V2 C MXene. This study provides valuable insights into the research and application of all-weather MXene energy storage catalytic materials.

Effect of high-flow nasal cannula versus non-invasive ventilation after extubation on successful extubation in obese patients: a retrospective analysis of the MIMIC-IV database.

BACKGROUND: The pathophysiological characteristics of the respiratory system of obese patients differ from those of non-obese patients. Few studies have evaluated the effects of high-flow nasal cannula (HFNC) and non-invasive ventilation (NIV) on the prognosis of obese patients. We here compared the effects of these two techniques on the prevention of reintubation after extubation for obese patients. METHODS: Data were extracted from the Medical Information Mart for Intensive Care database. Patients who underwent HFNC or NIV treatment after extubation were assigned to the HFNC or NIV group, respectively. The reintubation risk within 96 hours postextubation was compared between the two groups using a doubly robust estimation method. Propensity score matching was performed for both groups. RESULTS: This study included 757 patients (HFNC group: n=282; NIV group: n=475). There was no significant difference in the risk of reintubation within 96 hours after extubation for the HFNC group compared with the NIV group (OR 1.50, p=0.127). Among patients with body mass index ≥40 kg/m2, the HFNC group had a significantly lower risk of reintubation within 96 hours after extubation (OR 0.06, p=0.016). No significant differences were found in reintubation rates within 48 hours (15.6% vs 11.0%, p=0.314) and 72 hours (16.9% vs 13.0%, p=0.424), as well as in hospital mortality (3.2% vs 5.2%, p=0.571) and intensive care unit (ICU) mortality (1.3% vs 5.2%, p=0.108) between the two groups. However, the HFNC group had significantly longer hospital stays (14 days vs 9 days, p=0.005) and ICU (7 days vs 5 days, p=0.001) stays. CONCLUSIONS: This study suggests that HFNC therapy is not inferior to NIV in preventing reintubation in obese patients and appears to be advantageous in severely obese patients. However, HFNC is associated with significantly longer hospital stays and ICU stays.

Revealing mechanism and influence of microalgae cells' periodical auto-agglomeration induced by high concentration of carbon dioxide.

The efficient cultivation of microalgae using CO2 from flue gas can be a win-win situation for both environmental protection and energy accessibility. In general, 10-20% of CO2 in flue gas would decrease pH and inhibit microalgae growth. However, Chlorella sorokiniana MB-1 under 15% CO2 showed a periodical auto-agglomeration, which promoted microalgae growth on the contrary in this study. The maximum biomass concentration of 3.27 g L-1 was higher than that cultivated with an optimal CO2 concentration. The pH decreased to 6.04 after the mixed gas with 15% CO2 (v/v) was bubbled into medium for 0.5 h, which resulted in auto-agglomeration to protect microalgae from acidification and keep a high specific growth rate of 0.03 h-1. Then the pH recovered to 7 during stabilization phase, auto-agglomeration ratio was up to 100% because of lamellar extracellular polymeric substances. Therefore, the interesting periodical agglomeration both enhanced growth and simplified harvesting.

How can vanillin improve the performance of lignocellulosic biomass conversion in an immobilized laccase microreactor system?

Gentle and effective pretreatment is necessary to produce clean lignocellulosic biomass-based fuels. Herein, inspired by the efficient lignin degradation in the foregut of termites, the microreactor system using immobilized laccase and recoverable vanillin was proposed. Firstly, the co-deposition coating of dopamine, hydrogen peroxide and copper sulfate was constructed for laccase immobilization and a high immobilization efficiency of 87.0% was obtained in 30 min. After storage for 10 days, 82.2% activity was maintained in the laccase-loaded microreactor, which is 210.0% higher than free laccase. In addition, 6% (w/w) vanillin can improve lignin degradation in the laccase-loaded microreactor without impairing laccase activity, leading to a 47.3% increment in cellulose accessibility. Finally, a high cellulose conversion rate of 88.1% can be achieved in 1 h with glucose productivity of 2.62 g L-1 h-1. These demonstrated that the appropriate addition of vanillin can synergize with immobilized laccase to enhance the conversion of lignocellulosic biomass.

Non-immersed zigzag microalgae biofilm overcoming high turbidity and ammonia of wastewater for muti-pollutants bio-purification.

Biological treatment that utilizes microalgae technology has demonstrated outstanding efficacy in the wastewater purification and nutrients recovery. However, the high turbidity of the digested piggery wastewater (DPW) leads to serious light attenuation and the culture mode of suspended microalgae results in a huge landing area. Thus, to overcome light attenuation in DPW, a non-immersed titled zigzag microalgae biofilm was constructed by attaching it onto a porous cotton cloth. As a result, the light could directly irradiate microalgae biofilm that attached on both sides of the cotton cloth, and the microalgal biofilm area was up to 6 m2 per bioreactor landing area. When the non-immersed zigzag microalgae biofilm bioreactor (N-Z-MBP) was used to treat wastewater with an ammonia nitrogen (NH4+-N) concentration of 362 mg L-1, the NH4+-N was completely removed in just 5 days and the maximum growth rate of microalgae biofilm reached 7.02 g m-2 d-1. After 21 days of long-term sequencing batch operation for the N-Z-MBP, the biomass density of the biofilm reached 52 g m-2 and remained at this high value for the next 14 days. Most importantly, during the 35 days' running, the NH4+ -N maximum removal rate of single batch reached up to 65 mg L-1 d-1 and its concentration in the effluent was always below the discharge standard value (80 mg L-1 form GB18596-2001 of China) and total phosphorus was completely removed in each batch. Furthermore, the biomass concentration of microalgae cells in the effluent of the N-Z-MBP was almost zero, indicating that the non-submerged biofilm achieved in situ separation of microalgae from the wastewater. This work suggests that the N-Z-MBP can effectively purify DPW over a long period, providing a possible strategy to treat wastewater with high ammonia nitrogen and high turbidity.

Photoenzymatic decarboxylation: A promising way to produce sustainable aviation fuels and fine chemicals.

As one of the fastest-growing carbon emission sources, the aviation sector is severely restricted by carbon emission reduction targets. Sustainable aviation fuel (SAF) has emerged as the most potential alternative to traditional aviation fuel, but harsh production technologies limit its commercialization. Fatty acids photodecarboxylase from Chlorella variabilis NC64A (CvFAP), the latest discovered photoenzyme, provides promising approaches to produce various carbon-neutral biofuels and fine chemicals. This review highlights the state-of-the-art strategies to enhance the application of CvFAP in carbon-neutral biofuel and fine chemicals production, including supplementing alkane as decoy molecular, screening efficient CvFAP variants with directed evolution, constructing genetic strains, employing biphasic catalytic system, and immobilizing CvFAP in an efficient photobioreactor. Furthermore, future opportunities are suggested to enhance photoenzymatic decarboxylation and explore the catalytic mechanism of CvFAP. This review provides a broad context to improve CvFAP catalysis and advance its potential applications.

Immobilization of fatty acid photodecarboxylase in magnetic nickel ferrite nanoparticle.

Fatty acid photodecarboxylase in Chlorella variabilis NC64A (CvFAP) performed excellent ability to exclusively decarboxylate renewable fatty acids for C1-shortened hydrocarbons fuel production under visible light. However, the large-scale application by such an approach is limited by the free state of CvFAP catalyst, which is unstable for efficient biofuel production. In this study, CvFAP was immobilized in magnetic nickel ferrite (NiFe2O4) nanoparticles for facile recovery by a simple procedure. The shift of Ni 2p in electron binding energy was detected to clarify the interaction between Ni2+ and histidine of CvFAP. The coordination of NiFe2O4 and CvFAP contributed to an efficient affinity binding with an immobilization capacity of 98 mg/g carrier. Hydrocarbon fuel concentration of 3.7 mM was obtained by NiFe2O4@CvFAP-induced photoenzymatic decarboxylation. The high stability of CvFAP in terms of residual enzyme activity of 79.7% at pH 9.0 and that of 68% at organic solvent ratio of 60%, respectively, were observed.