Nitrate Protects Microorganisms and Promotes Formation of Toxic Nitrogenous Byproducts during Water Disinfection by Far-UVC Radiation.

Far-UVC radiation is an emerging tool for combating pathogenic microorganisms in water, but its vulnerability to water matrix components remains unclear. We herein report the critical impacts of nitrate during Far-UVC disinfection of water. Nitrate at environmentally relevant concentrations (0.5-10.0 mg-N L-1) significantly inhibits Escherichia coli inactivation by Far-UVC radiation at 222 nm, via prolonging the "lag phase" of inactivation and reducing the inactivation rate constants by 1.08-2.74 times, while it shows negligible impact on E. coli inactivation by UVC radiation at 254 nm. The inhibitory impact of nitrate on Far-UVC disinfection is attributed to its strong light-shielding effect. Although hydroxyl radicals and reactive nitrogen species are generated from Far-UVC photolysis of nitrate at high concentrations of 10-13 and ∼10-7 M, respectively, those radicals are unable to compensate for the light-shielding effect of nitrate on E. coli inactivation. Moreover, reactive nitrogen species lead to the formation of nitrogenous byproducts, which increase the genotoxicity of the water. The findings advance the fundamental photochemistry and radical chemistry of nitrate at 222 nm and provide useful insights to guide the operation of Far-UVC in treating nitrate-containing water.

Accelerated Catalytic Ozonation in a Mesoporous Carbon-Supported Atomic Fe-N4 Sites Nanoreactor: Confinement Effect and Resistance to Poisoning.

The design of a micro-/nanoreactor is of great significance for catalytic ozonation, which can achieve effective mass transfer and expose powerful reaction species. Herein, the mesoporous carbon with atomic Fe-N4 sites embedded in the ordered carbon nanochannels (Fe-N4/CMK-3) was synthesized by the hard-template method. Fe-N4/CMK-3 can be employed as nanoreactors with preferred electronic and geometric catalytic microenvironments for the internal catalytic ozonation of CH3SH. During the CH3SH oxidation process, the mass transfer coefficient of the Fe-N4/CMK-3 confined system with sufficient O3 transfer featured a level of at least 1.87 × 10-5, which is 34.6 times that of the Fe-N4/C-Si unconfined system. Detailed experimental studies and theoretical calculations demonstrated that the anchored atomic Fe-N4 sites and nanoconfinement effects regulated the local electronic structure of the catalyst and promoted the activation of O3 molecules to produce atomic oxygen species (AOS) and reactive oxygen species (ROS), eventually achieving efficient oxidation of CH3SH into CO2/SO42-. Benefiting from the high diffusion rate and the augmentation of AOS/ROS, Fe-N4/CMK-3 exhibited an excellent poisoning tolerance, along with high catalytic durability. This contribution provides the proof-of-concept strategy for accelerating catalytic ozonation of sulfur-containing volatile organic compounds (VOCs) by combining confined catalysis and atomic catalysts and can be extended to the purification of other gaseous pollutants.

Rapid Inactivation of Fungal Spores in Drinking Water by Far-UVC Photolysis of Free Chlorine.

Effective and affordable disinfection technology is one key to achieving Sustainable Development Goal 6. In this work, we develop a process by integrating Far-UVC irradiation at 222 nm with free chlorine (UV222/chlorine) for rapid inactivation of the chlorine-resistant and opportunistic Aspergillus niger spores in drinking water. The UV222/chlorine process achieves a 5.0-log inactivation of the A. niger spores at a chlorine dosage of 3.0 mg L-1 and a UV fluence of 30 mJ cm-2 in deionized water, tap water, and surface water. The inactivation rate constant of the spores by the UV222/chlorine process is 0.55 min-1, which is 4.6-fold, 5.5-fold, and 1.8-fold, respectively, higher than those of the UV222 alone, chlorination alone, and the conventional UV254/chlorine process under comparable conditions. The more efficient inactivation by the UV222/chlorine process is mainly attributed to the enhanced generation of reactive chlorine species (e.g., 6.7 × 10-15 M of Cl•) instead of hydroxyl radicals from UV222 photolysis of chlorine, which is verified through both experiments and a kinetic model. We further demonstrate that UV222 photolysis damages the membrane integrity and benefits the penetration of chlorine and radicals into cells for inactivation. The merits of the UV222/chlorine process over the UV254/chlorine process also include the more effective inhibition of the photoreactivation of the spores after disinfection and the lower formation of chlorinated disinfection byproducts and toxicity.

The dynamics and removal efficiency of antibiotic resistance genes by UV-LED treatment: An integrated research on single- or dual-wavelength irradiation.

Antimicrobial resistance has gained increasing attention, because of the awareness of its potential health risks. Strategies for the removal of antibiotic resistance genes (ARGs) are urgently required. In the present study, UV-LEDs at wavelength of 265 and 285 nm were integrated at five conditions, including single 265 nm UV-LED, single 285 nm UV-LED, and combined 265 nm and 285 nm UV-LED at different intensities, to remove tet A, cat 1, and amp C. The ARGs removal efficiency, gene behavior, and possible cellular mechanism were analyzed using real-time quantitative PCR, flow cytometry, and transmission electron microscopy (TEM). The 265 nm UV-LED is more effective than the 285 nm UV-LED and their combinations in terms of ARGs control, in which 1.91, 1.71, and 1.45 log were removed for tet A, cat 1, and amp C, respectively, at a UV dosage of 500 mJ/cm2. The intracellular gene leakage was detected in all five UV-LED experiment scenarios even when the cell membrane damage was insignificant with the highest increase of 0.69 log ARGs. ROS was generated during the irradiation, and the ROS was strongly negative correlated with intracellular ARGs, which could promote the degradation and removal of ARGs. This study provides a new insight of intracellular ARGs removal, because direct irradiation, ROS oxidation, and leakage to the extracellular serve as the three main pathways under high-dosage UV-LED irradiation. Further research should be focused on the mechanism and optimization of UV technology with 265 nm UV-LED for ARG control.

Sulfone-Modified Covalent Organic Frameworks Enabling Efficient Photocatalytic Hydrogen Peroxide Generation via One-Step Two-Electron O2 Reduction.

Photocatalytic oxygen reduction reaction (ORR) offers a promising hydrogen peroxide (H2 O2 ) synthetic strategy, especially the one-step two-electron (2e- ) ORR route holds great potential in achieving highly efficient and selectivity. However, efficient one-step 2e- ORR is rarely harvested and the underlying mechanism for regulating the ORR pathways remains greatly obscure. Here, by loading sulfone units into covalent organic frameworks (FS-COFs), we present an efficient photocatalyst for H2 O2 generation via one-step 2e- ORR from pure water and air. Under visible light irradiation, FS-COFs exert a superb H2 O2 yield of 3904.2 µmol h-1 g-1 , outperforming most reported metal-free catalysts under similar conditions. Experimental and theoretical investigation reveals that the sulfone units accelerate the separation of photoinduced electron-hole (e- -h+ ) pairs, enhance the protonation of COFs, and promote O2 adsorption in the Yeager-type, which jointly alters the reaction process from two-step 2e- ORR to the one-step one, thereby achieving efficient H2 O2 generation with high selectivity.

Enhanced Catalytic Ozonation for Eliminating CH3SH via Stable and Circular Electronic Metal-Support Interactions of Si-O-Mn Bonds with Low Mn Loading.

Catalytic ozonation of methyl mercaptan (CH3SH) can effectively control this unbearable odorous sulfur-containing volatile organic compound (S-VOC). The construction of an electronic metal-support interaction (EMSI) coordination structure to maximize the number of active sites and increase the intrinsic activity of active sites is an effective means to improve catalytic performance. In this work, the abundant Si-OH groups on PSBA-15 (SBA-15 before calcination) were used to anchor Mn to form a Si-O-Mn-based EMSI coordination structure. Detailed characterizations and theoretical simulations reveal that the strong EMSI effect significantly adjusts and stabilizes the electronic structure of Mn 3d states, resulting in an electron-rich center on the Si-O-Mn bond to promote the specific adsorption/activation of ozone (O3) and an electron-poor center on the (Si-O-)Mn-O bond to adsorb a large amount of CH3SH accompanied by its own oxidative degradation. In situ Raman and in situ Fourier transform infrared (FTIR) analyses identify that catalytic ozonation over 3.0Mn-PSBA generates atomic oxygen species (AOS/*O) and reactive oxygen species (ROS/•O2-) to achieve efficient decomposition of CH3SH into CO2/SO42-. Furthermore, the electrons obtained from CH3SH in electron-poor centers are transferred to maintain the redox cycle of Mn2+/3+ → Mn4+ → Mn2+/3+ through the internal bond bridge, thus accomplishing the efficient and stable degradation of CH3SH prolonged to 180 min. Therefore, the rational design of catalysts with abundant active sites and optimized inherent activity via the EMSI effect can provide significant potential to improve catalytic performance and eliminate odorous gases.

Reactive Nitrogen Species Mediated Inactivation of Pathogenic Microorganisms during UVA Photolysis of Nitrite at Surface Water Levels.

UVA photolysis of nitrite (NO2-) occurs in a number of natural and engineered aquatic systems. This study reports for the first time that pathogenic microorganisms can be effectively inactivated during the coexposure of UVA irradiation and NO2- under environmentally relevant conditions. The results demonstrated that more than 3 log inactivation of Escherichia coli K-12, Staphylococcus aureus, and Spingopyxis sp. BM1-1 was achieved by UVA photolysis of 2.0 mg-N L-1 of NO2- in synthetic drinking water and real surface water. The inactivation was mainly attributed to the reactive species generated from UVA photolysis of NO2- rather than UVA irradiation or NO2- oxidation alone. The inactivation was predominantly contributed by the reactive nitrogen species (NO2• and ONOO-/HOONO) instead of the reactive oxygen species (HO• or O2•-). A kinetic model to simulate the reactive species generation from UVA photolysis of NO2- was established, validated, and used to predict the contributions of different reactive species to the inactivation under various environmental conditions. Several advanced tools (e.g., D2O - labeling with Raman spectroscopy) were used to demonstrate that the inactivation by the UVA/NO2- treatment was attributed to the DNA destruction by the reactive nitrogen species, which completely suppressed the viable but nonculturable (VBNC) states and the reactivation of bacteria. This study highlights a novel process for the inactivation of pathogenic microorganisms in water and emphasizes the critical role of reactive nitrogen species in water disinfection and purification.

Self-Accelerating Interfacial Catalytic Elimination of Gaseous Sulfur-Containing Volatile Organic Compounds as Microbubbles in a Facet-Engineered Three-Dimensional BiOCl Sponge Fenton-Like Process.

The elimination of gaseous sulfur-containing volatile organic compounds (S-VOCs) by a microbubble-assisted Fenton-like process is an innovative strategy. Herein, we established a microbubble-assisted Fenton-like process to eliminate malodorous microbubble CH3SH as representative gaseous S-VOCs, in which BiOCl nanosheets loaded on a three-dimensional sponge were exposed to (001) or (010) facets and induced Fenton-like interface reactions. Intriguingly, the microbubble-assisted Fenton-like process significantly removed 99.9% of CH3SH, higher than that of the macrobubble-assisted Fenton-like process (39.0%). The self-accelerating interfacial catalytic mechanism was in-depth identified by in situ ATR-FTIR, PTR-TOF-MS, EPR, and DFT computational study. The extraordinary elimination performance of microbubble-assisted Fenton-like process lies in the enhancing dissolution/mass transfer of gaseous CH3SH in the gas/liquid phase and the tight contact between CH3SH-microbubbles and 3D-BiOCl sponge due to the low rising velocity (0.13 mm s-1) and negative charge (-45.53 mV) of CH3SH-microbubbles, as well as the effective generation of 1O2 by activating the enriched dissolved oxygen in CH3SH-microbubble via effective electron-polarized sites on 3D-BiOCl sponge. Furthermore, CH3SH-microbubbles transferred electrons to H2O2 through electron-rich oxygen vacancy centers of the 3D-BiOCl sponge to generate more •OH, thus achieving excellent elimination performance. Overall, this study demonstrates the enhanced self-accelerating interfacial catalytic elimination by S-VOC microbubble and provides the underlying mechanisms.

Complex Bilateral Interactions Determine the Fate of Polystyrene Micro- and Nanoplastics and Soil Protists: Implications from a Soil Amoeba.

Nano- and microplastics have become a serious global concern, threatening our living environments. Previous studies have shown that many organisms, including bacteria, animals, and plants, can be affected by microplastics. However, little is known about one ecologically important group of soil organisms, the protists. In this study, we investigated how polystyrene micro- and nanoplastics interacted with a soil amoeba Dictyostelium discoideum. The results showed that environmental concentrations of nano- and microplastics could negatively affect the soil amoeba's fitness and development. D. discoideum ingested both nano- and microplastics through phagocytosis but packed and excreted them during slug migration, which also promoted their biodegradation. Fourier transform infrared spectroscopy analyses revealed the formation of new oxygen-containing functional groups and the sign of possible oxidation of polystyrene. Also, nano- and microplastic exposure disrupted the nutrient and energy metabolisms of D. discoideum and affected the expression of key genes (e.g., cf45-1, dcsA, aprA, dymB, and gefB) related to morphogenesis and phagocytosis. In conclusion, our results show that nano- and microplastics have complex bilateral interactions with the soil amoeba, affecting each other's fate in the soil environment. This study provides new insights into how soil protists interact with nano- and microplastics in the soil ecosystem.

Enhanced Catalytic Ozonation for Eliminating CH3SH via Graphene-Supported Positively Charged Atomic Pt Undergoing Pt2+/Pt4+ Redox Cycle.

Constructing catalysts with electronic metal-support interaction (EMSI) is promising for catalytic reactions. Herein, graphene-supported positively charged (Pt2+/Pt4+) atomically dispersed Pt catalysts (AD-Pt-G) with PtxC3 (x = 1, 2, and 4)-based EMSI coordination structures are achieved for boosting the catalytic ozonation for odorous CH3SH removal. A CH3SH removal efficiency of 91.5% can be obtained during catalytic ozonation using optimum 0.5AD-Pt-G within 12 h under a gas hourly space velocity of 60,000 mL h-1 g-1, whereas that of pure graphene is 40.4%. Proton transfer reaction time-of-flight mass spectrometry, in situ diffuse reflectance infrared Fourier transform spectroscopy/Raman, and electron spin resonance verify that the PtxC3 coordination structure with atomic Pt2+ sites on AD-Pt-G can activate O2 to generate peroxide species (*O2) for partial oxidation of CH3SH during the adsorption period and trigger O3 into surface atomic oxygen (*Oad), *O2, and superoxide radicals (·O2-) to accomplish a stable, high-efficiency, and deeper oxidation of CH3SH during the catalytic ozonation stage. Moreover, the results of XPS and DFT calculation imply the occurrence of Pt2+ → Pt4+ → Pt2+ recirculation on PtxC3 for AD-Pt-G to maintain the continuous catalytic ozonation for 12 h, i.e., Pt2+ species devote electrons in 5d-orbitals to activate O3, while Pt4+ species can be reduced back to Pt2+ via capturing electrons from CH3SH. This study can provide novel insights into the development of atomically dispersed Pt catalysts with a strong EMSI effect to realize excellent catalytic ozonation for air purification.

Adsorption and visible-light photocatalytic degradation of organic pollutants by functionalized biochar: Role of iodine doping and reactive species.

Here we developed the functionalized biochar as low-cost and heavy metal-free photocatalysts via a facile iodine doping method, which exhibit efficient adsorption and visible-light-driven photocatalytic degradation of representative organic pollutants, phenol and tetracycline. On one hand, iodine doping elevates the adsorption via creating extra pores, e.g., the adsorbed amounts of phenol by iodine-doped WSP and OSR biochar are increased by 161.8% and 146.3%, respectively, which in turn facilitates the photocatalytic oxidation of the adsorbed pollutants. On the other hand, iodine doping leads to the strong photo-induced excitation and remarkably reduced charge carrier transfer resistance, boosting the photocatalytic activity of iodine-doped biochar by more than 20 orders towards organic pollutants (e.g., phenol) degradation. The systematic analysis of reactive species reveals the active roles of O2-, H2O2, 1O2, OH, electrons, and holes in photocatalytic process and identifies O2- to be the major contributor. This work affords a facile approach to generating porous and visible-light-driven photocatalyst from biomass for efficient adsorbing and degrading organic pollutants, opening up an avenue to turn biowaste into biomaterials for sustainable environmental remediation.

Anomalous dispersion of bioinspired flower-like microparticles for oil/water separation.

Hydrophobic particles have been suffering from aggregation in aqueous media, which limits their applications in oil/water separation. Surfactants have been used to increase the dispersity of the hydrophobic particles in water, but this approach compromises particles' hydrophobicity and oil absorption capabilities. Recently, hierarchical microparticles decorated with nanospikes were found to exhibit long-term anomalous dispersion in liquid medium without adding any surfactants. However, whether this anomalous dispersion phenomenon was applicable to 2D nano-petals decorated microparticles still remains unknown. Here, we developed a ZnO-based flower-like microparticles (FLMPs) whose surfaces were attached with 2D nano-petals, and we examined their anomalous dispersity. Our results showed that both hydrophilic and hydrophobic FLMPs could achieve anomalous dispersity either in water or organic solvents, likely due to reduced interparticle collision by the 2D nano-petals. In addition, the functional hydrophobic FLMPs also possessed a large surface area and superhydrophobic surfaces to efficiently absorb oil spills on water and oil emulsion suspended in water. In contrast, the hydrophobic microbeads (MBs) without nano-petals structure seriously aggregated in water and exhibited reduced oil absorption abilities. Our work demonstrated the new finding of 2D nano-pedal structure-mediated anomalous dispersity, and provided a new method for effective oil/water separation using superhydrophobic particles without surfactants.

Facet Engineered α-MnO2 for Efficient Catalytic Ozonation of Odor CH3SH: Oxygen Vacancy-Induced Active Centers and Catalytic Mechanism.

The oxygen vacancy in MnO2 is normally proved as the reactive site for the catalytic ozonation, and acquiring a highly reactive crystal facet with abundant oxygen vacancy by facet engineering is advisable for boosting the catalytic activity. In this study, three facet-engineered α-MnO2 was prepared and successfully utilized for catalytic ozonation toward an odorous CH3SH. The as-synthesized 310-MnO2 exhibited superior activity in catalytic ozonation of CH3SH than that of 110-MnO2 and 100-MnO2, which could achieve 100% removal efficiency for 70 ppm of CH3SH within 20 min. The results of XPS, Raman, H2-TPR, and DFT calculation all prove that the (310) facets possess a higher surface energy than other facets can feature the construction of oxygen vacancies, thus facilitating the adsorption and activate O3 into intermediate peroxide species (O2-/O22-) and reactive oxygen species (•O2-/1O2) for eliminating adjacent CH3SH. In situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) revealed that the CH3SH molecular was chemisorbed on S atom to form CH3S-, which was further converted into intermediate CH3SO3- and finally oxidized into SO42- and CO32-/CO2 during the process. Attributed to the deep oxidation of CH3SH on 310-MnO2 via efficient cycling of active oxygen vacancies, the lifetime of 310-MnO2 can be extended to 2.5 h with limited loss of activity, while 110-MnO2 and 100-MnO2 were inactivated within 1 h. This study deepens the comprehension of facet-engineering in MnO2 and presents an efficient and portable catalyst to control odorous pollution.

Sterilization of Escherichia coli by Photothermal Synergy of WO3-x/C Nanosheet under Infrared Light Irradiation.

The application of photocatalytic sterilization technology for the sterilization of water has been broadly studied in recent years. However, developing photocatalysts with high disinfection efficiency remains an urgent challenge. Tungsten trioxide with coexisting oxygen vacancies and carbon coating (WO3-x/C) has been successfully synthesized toward the photothermal inactivation of Escherichia coli. Oxygen vacancies and carbon coating bring WO3-x/C strong absorption in the infrared region and enhance the carrier separation efficiency. As a result, a higher sterilization rate is obtained compared to WO3. WO3-x/C can completely inactivate E. coli under infrared light within 40 min through photothermal synergy process. During the process of inactivating bacteria over WO3-x/C, E. coli is killed by the destruction of their cell membrane to decrease the activity of enzymes and release the cell contents, which can be ascribed to the efficient generation of reactive oxygen species (O2•- and •OH) and thermal effect. This work demonstrates a novel approach for engineering efficient and energy-saving catalysts for water sterilization.

Enhanced Performance and Conversion Pathway for Catalytic Ozonation of Methyl Mercaptan on Single-Atom Ag Deposited Three-Dimensional Ordered Mesoporous MnO2.

In this study, Ag deposited three-dimensional MnO2 porous hollow microspheres (Ag/MnO2 PHMSs) with high dispersion of the atom level Ag species are first prepared by a novel method of redox precipitation. Due to the highly efficient utilization of downsized Ag nanoparticles, the optimal 0.3% Ag/MnO2 PHMSs can completely degrade 70 ppm CH3SH within 600 s, much higher than that of MnO2 PHMSs (79%). Additionally, the catalyst retains long-term stability and can be regenerated to its initial activity through regeneration with ethanol and HCl. The results of characterization of Ag/MnO2 PHMSs and catalytic performance tests clearly demonstrate that the proper amount of Ag incorporation not only facilitates the chemi-adsorption but also induces more formation of vacancy oxygen (Ov) and lattice oxygen (OL) in MnO2 as well as Ag species as activation sites to collectively favor the catalytic ozonation of CH3SH. Ag/MnO2 PHMSs can efficiently transform CH3SH into CH3SAg/CH3S-SCH3 and then oxidize them into SO42- and CO2 as evidenced by in situ diffuse reflectance infrared Fourier transform spectroscopy. Meanwhile, electron paramagnetic resonance and scavenger tests indicate that •OH and 1O2 are the primary reactive species rather than surface atomic oxygen species contributing to CH3SH removal over Ag/MnO2 PHMSs. This work presents an efficient catalyst of single atom Ag incorporated MnO2 PHMSs to control air pollution.

Dual Roles of Capsular Extracellular Polymeric Substances in Photocatalytic Inactivation of Escherichia coli: Comparison of E. coli BW25113 and Isogenic Mutants.

The dual roles of capsular extracellular polymeric substances (EPS) in the photocatalytic inactivation of bacteria were demonstrated in a TiO2-UVA system, by comparing wild-type Escherichia coli strain BW25113 and isogenic mutants with upregulated and downregulated production of capsular EPS. In a partition system in which direct contact between bacterial cells and TiO2 particles was inhibited, an increase in the amount of EPS was associated with increased bacterial resistance to photocatalytic inactivation. In contrast, when bacterial cells were in direct contact with TiO2 particles, an increase in the amount of capsular EPS decreased cell viability during photocatalytic treatment. Taken together, these results suggest that although capsular EPS can protect bacterial cells by consuming photogenerated reactive species, it also facilitates photocatalytic inactivation of bacteria by promoting the adhesion of TiO2 particles to the cell surface. Fluorescence microscopy and scanning electron microscopy analyses further confirmed that high capsular EPS density led to more TiO2 particles attaching to cells and forming bacterium-TiO2 aggregates. Calculations of interaction energy, represented by extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) potential, suggested that the presence of capsular EPS enhances the attachment of TiO2 particles to bacterial cells via acid-base interactions. Consideration of these mechanisms is critical for understanding bacterium-nanoparticle interactions and the photocatalytic inactivation of bacteria.

Red Phosphorus: An Earth-Abundant Elemental Photocatalyst for "Green" Bacterial Inactivation under Visible Light.

Earth-abundant red phosphorus was found to exhibit remarkable efficiency to inactivate Escherichia coli K-12 under the full spectrum of visible light and even sunlight. The reactive oxygen species (•OH, •O2(-), H2O2), which were measured and identified to derive mainly from photogenerated electrons in the conduction band using fluorescent probes and scavengers, collectively contributed to the good performance of red phosphorus. Especially, the inactivated-membrane function enzymes were found to be associated with great loss of respiratory and ATP synthesis activity, the kinetics of which paralleled cell death and occurred much earlier than those of cytoplasmic proteins and chromosomal DNA. This indicated that the cell membrane was a vital first target for reactive oxygen species oxidation. The increased permeability of the cell membrane consequently accelerated intracellular protein carboxylation and DNA degradation to cause definite bacterial death. Microscopic analyses further confirmed the cell destruction process starting with the cell envelope and extending to the intracellular components. The red phosphorus still maintained good performance even after recycling through five reaction cycles. This work offers new insight into the exploration and use of an elemental photocatalyst for "green" environmental applications.

Unraveling Valence Electron Number Dependent Excitonic Effects over M1-N3C1 Sites in Single-Atom Catalysts.

Excitonic effects significantly influence the selective generation of reactive oxygen species and photothermal conversion efficiency in photocatalytic reactions; however, the intrinsic factors governing excitonic effects remain elusive. Herein, a series of single-atom catalysts with well-defined M1-N3C1 (M = Mn, Fe, Co, and Ni) active sites are designed and synthesized to investigate the structure-activity relationship between photocatalytic materials and excitonic effects. Comprehensive characterization and theoretical calculations unveil that excitonic effects are positively correlated with the number of valence electrons in single metal atoms. The single Mn atom with 5.93 valence electrons exhibits the weakest excitonic effects, which dominate superoxide radical (O2•-) generation through charge transfer and enhance photothermal conversion efficiency. Conversely, the single Ni atom with 9.27 valence electrons exhibits the strongest excitonic effects, dominating singlet oxygen (1O2) generation via energy transfer while suppressing photothermal conversion efficiency. Based on the valence electron number dependent excitonic effects, a reaction environment with hyperthermia and abundant cytotoxic O2•- is designed, achieving efficient and stable water disinfection. This work reveals single metal atom dependent excitonic effects and presents an atomic-level methodology for catalytic application targeted reaction environment tailoring.

MnO2-based capacitive system enhances ozone inactivation of bacteria by disrupting cell membrane.

The application of ozone (O3) disinfection has been hindered by its low solubility in water and the formation of disinfection by-products (DBPs). In this study, capacitive disinfection is applied as a pre-treatment for O3 oxidation, in which manganese dioxide with a rambutan-like hollow spherical structure is used as the electrode to increase the charge density on the electrode surface. When a voltage is applied, the negative-charged microbes are attracted to the electrodes and killed by electrical interactions. The contact between microbes and capacitive electrodes leads to changes in cell permeability and burst of reactive oxygen species, thereby promoting the diffusion of O3 into the cells. After O3 penetrates the cell membrane, it can directly attack the cytoplasmic constituents, accelerating fatal and irreversible damage to pathogens. As a result, the performance of the capacitance-O3 process is proved better than the direct sum of the two individual process efficiencies. The design of capacitance-O3 system is beneficial to reduce the ozone dosage and DBPs with a broader inactivation spectrum, which is conducive to the application of ozone in primary water disinfection.

Graphene and g-C3N4 nanosheets cowrapped elemental α-sulfur as a novel metal-free heterojunction photocatalyst for bacterial inactivation under visible-light.

A new class of metal-free heterojunction photocatalysts was prepared by wrapping reduced graphene oxide (RGO) and g-C3N4 (CN) sheets on crystals of cyclooctasulfur (α-S8). Two distinctive structures were fabricated by wrapping RGO and CN sheets in different orders. The first was RGO sheets sandwiched in heterojunction of CN sheets and α-S8 (i.e., CNRGOS8), while the second structure was the other way around (i.e., RGOCNS8). Both structures exhibited antibacterial activity under visible-light irradiation. CNRGOS8 showed stronger bacterial inactivation than RGOCNS8 in aerobic conditions. However, RGOCNS8 was more active than CNRGOS8 under anaerobic condition. A possible mechanism was proposed to explain the differences between photocatalytic oxidative inactivation and reductive inactivation. As a proof-of-concept, this work could offer new inroads into exploration and utilization of graphene sheets and g-C3N4 sheets cowrapped nanocomposites for environmental applications.