RESUMO
Photothermal heating and photocatalytic treatment are two solar-driven water processing approaches by harnessing NIR and UV-vis light, respectively, which can fully utilize solar energy if integrated. However, it remains a challenge to achieve high performance in both approaches when integrated in a material due to uncontrollable heat diffusion. Here, we report a demonstration of heat confinement on photothermal sites and fluid cooling on photocatalysis sites at the nanoscale, within a well-designed heat and fluid confinement nanofiber reactor. Photothermal and photocatalytic nanostructures were alternatively aligned in electrospun nanofibers for on-demand nanofluidic thermal management as well as easy folding into 3D structures with enhanced light utilization and mass transfer. Such a design showed simultaneously high photothermal evaporation rate (2.59 kg m-2 h-1, exceeding the limit rate) and efficient photocatalytic upcycling of microplastics pollutant into valued products. Enabled by controlled photothermal heating, the valued main product (i.e., methyl acetate) can be evaporated out with 100% selectivity by in situ separation.
RESUMO
Dry reforming of methane (DRM) is a promising technique for converting greenhouse gases (namely, CH4 and CO2) into syngas. However, traditional thermocatalytic processes require high temperatures and suffer from low selectivity and coke-induced instability. Here, we report high-entropy alloys loaded on SrTiO3 as highly efficient and coke-resistant catalysts for light-driven DRM without a secondary source of heating. This process involves carbon exchange between reactants (i.e., CO2 and CH4) and oxygen exchange between CO2 and the lattice oxygen of supports, during which CO and H2 are gradually produced and released. Such a mechanism deeply suppresses the undesired side reactions such as reverse water-gas shift reaction and methane deep dissociation. Impressively, the optimized CoNiRuRhPd/SrTiO3 catalyst achieves ultrahigh activity (15.6/16.0 mol gmetal-1 h-1 for H2/CO production), long-term stability (â¼150 h), and remarkable selectivity (â¼0.96). This work opens a new avenue for future energy-efficient industrial applications.
RESUMO
Light-driven hydrogenation of nitro compounds to functionalized amines is of great importance yet a challenge for practical applications, which calls for the development of high-performance, nonprecious photocatalysts and efficient catalytic systems. Herein, we report a high-efficiency Fe3O4@TiO2 photocatalyst via a sol-gel and subsequent pyrolysis strategy, which exhibits desirable photothermal hydrogenation performance of nitro compounds to functionalized amines with the excellent selectivity of >90% exceeding those of the state-of-the-art heterogeneous photocatalysts. Our experimental results and theoretical calculations for the first time reveal that Fe3O4 is the major active phase, and the strong metal-support interaction between Fe3O4 and reducible TiO2 further leads to performance improvement, taking advantage of the enhanced photothermal effect and the improved adsorption for the reactant and hydrazine hydrate. Notably, a variety of halonitrobenzenes and pharmaceutical intermediates can be completely converted to functionalized amines with high selectivities, even in gram-scale reactions. This work provides a new insight into the rational design of nonprecious photo/thermo-catalysts for other catalytic reactions.
RESUMO
Photocatalytic oxidative coupling of methane (OCM) into value-added industrial chemicals offers an appealing green technique for achieving sustainable development, whereas it encounters double bottlenecks in relatively low methane conversion rate and severe overoxidation. Herein, we engineer a continuous gas flow system to achieve efficient photocatalytic OCM while suppressing overoxidation by synergizing the moderate active oxygen species, surface plasmon-mediated polarization, and multipoint gas intake flow reactor. Particularly, a remarkable CH4 conversion rate of 218.2 µmol h-1 with an excellent selectivity of â¼90% toward C2+ hydrocarbons and a remarkable stability over 240 h is achieved over a designed Au/TiO2 photocatalyst in our continuous gas flow system with a homemade three-dimensional (3D) printed flow reactor. This work provides an informative concept to engineer a high-performance flow system for photocatalytic OCM by synergizing the design of the reactor and photocatalyst to synchronously regulate the mass transfer, activation of reactants, and inhibition of overoxidation.
RESUMO
Impedance matching modulation of the electromagnetic wave (EMW) absorbers toward broad effective absorption bandwidth (EAB) is the ultimate aim in EMW attenuation applications. Here, a Joule heating strategy is reported for preparation of the Co-loaded carbon (Co/C) absorber with tunable impedance characteristics. Typically, the size of the Co can be regulated to range from single-atoms to clusters, and to nanocrystals. The varied sizes of the Co combined with different graphitization degrees of carbon can result in different relative input impedances and electromagnetic loss, leading to the tunable EMW absorption properties of the Co/C absorber. By meticulously coalescing the different prepared Co/C, the working frequency can be easily tuned, covering Ku, X, and C bands. Furthermore, the Co/C demonstrates a high EMW attenuation due to its unique dielectric loss capability and magnetic loss characteristics. The abundant interfaces of Co/C can also contribute to the enhanced interfacial polarization for improving EMW attenuation. This work demonstrates the importance of optimizing the metal and carbon interaction to the impedance matching toward wide EAB of the EMW absorbers.
RESUMO
In this work, we report on the first, to our knowledge, 2.05-µm laser based on femtosecond-laser direct written (FsLDW) Tm,Ho:YLF cladding waveguides. A channel waveguide with a 90-µm diameter "fiber-like" low-index cladding is fabricated in a 6â at. % Tm3+, 0.4â at. % Ho3+:LiYF4 crystal by FsLDW. Pumped by Ti:sapphire laser at 795.1â nm, the fabricated waveguide supports efficient lasing oscillation at 2050â nm with a maximum output power of 47.5â mW, a minimum lasing threshold of 181â mW, and a slope efficiency of 20.1%. The impacts of cavity conditions and polarizations of the pump light on the obtained lasing performance are well studied. The experimental results obtained in this study demonstrate the great potential of utilizing Tm,Ho:YLF and FsLDW for the development of durable mid-infrared lasers featuring compact designs.
RESUMO
Homogenous molecular photocatalysts for CO2 reduction, especially metal complex-based photosensitizerâcatalyst assemblages, have been attracting extensive research interests due to their efficiency and customizability. However, their low durability and recyclability limit practical applications. In this work, we immobilized the catalysts of metal terpyridyl complexes and the photosensitizer of [Ru(bpy)3]Cl2 onto the surface of carbon nanotubes through covalent bonds and electrostatic interactions, respectively, transforming the homogeneous system into a heterogeneous one. Our characterizations prove that these metal complexes are well dispersed on CNTs with a high loading (ca. 12 wt.%). Photocatalytic measurements reveal that catalytic activity is remarkably enhanced when the molecular catalysts are anchored, which is three times higher than that of homogeneous molecular catalysts. Moreover, when the photosensitizer of [Ru(bpy)3]Cl2 is immobilized, the side reaction of hydrogen evolution is completely suppressed and the selectivity for CO production reaches 100%, with its durability also significantly improved. This work provides an effective pathway for constructing heterogeneous photocatalysts based on rational assembly of efficient molecular photosensitizers and catalysts.
Assuntos
Complexos de Coordenação , Nanotubos de Carbono , Dióxido de Carbono , Fármacos Fotossensibilizantes , HidrogênioRESUMO
Electrocatalytic carbon dioxide reduction reaction (CO2RR) is an effective way of converting CO2 into value-added products using renewable energy, whose activity and selectivity can be in principle maneuvered by tuning the microenvironment near catalytic sites. Here, we demonstrate a strategy for tuning the microenvironment of CO2RR by learning from the natural chlorophyll and heme. Specifically, the conductive covalent organic frameworks (COFs) linked by piperazine serve as versatile supports for single-atom catalysts (SACs), and the pendant groups modified on the COFs can be readily tailored to offer different push-pull electronic effects for tunable microenvironment. As a result, while all the COFs exhibit high chemical structure stability under harsh conditions and good conductivity, the addition of -CH2NH2 can greatly enhance the activity and selectivity of CO2RR. As proven by experimental characterization and theoretical simulation, the electron-donating group (-CH2NH2) not only reduces the surface work function of COF, but also improves the adsorption energy of the key intermediate *COOH, compared with the COFs with electron-withdrawing groups (-CN, -COOH) near the active sites. This work provides insights into the microenvironment modulation of CO2RR electrocatalysts at the molecular level.
RESUMO
The recombination of photogenerated charge carriers severely limits the performance of photoelectrochemical (PEC) H2 production. Here, we demonstrate that this limitation can be overcome by optimizing the charge transfer dynamics at the solid-liquid interface via molecular catalyst design. Specifically, the surface of a p-Si photocathode is modulated using molecular catalysts with different metal atoms and organic ligands to improve H2 production performance. Co(pda-SO3H)2 is identified as an efficient and durable catalyst for H2 production through the rational design of metal centers and first/second coordination spheres. The modulation with Co(pda-SO3H)2, which contains an electron-withdrawing -SO3H group in the second coordination sphere, elevates the flat-band potential of the polished p-Si photocathode and nanoporous p-Si photocathode by 81â mV and 124â mV, respectively, leading to the maximized energy band bending and the minimized interfacial carrier transport resistance. Consequently, both the two photocathodes achieve the Faradaic efficiency of more than 95 % for H2 production, which is well maintained during 18â h and 21â h reaction, respectively. This work highlights that the band-edge engineering by molecular catalysts could be an important design consideration for semiconductor-catalyst hybrids toward PEC H2 production.
RESUMO
The creation of frustrated Lewis pairs on catalyst surface is an effective strategy for tuning CO2 activation. The critical step in the formation of frustrated Lewis pairs is the spatial effect of proximal Lewis acid-Lewis base pairs. Here, we demonstrate a facile surface functionalization methodology that enables hydrogen bonding between N and H atoms to mediate the construction of frustrated Lewis pairs in poly(heptazine imide), thereby increasing the propensity to activate CO2 molecules. Experimental and theoretical results show that the construction of active hydrogen bonding regions can facilitate the bending of CO2 molecules. Furthermore, the delocalization of electron clouds induced by the hydrogen bonding-mediated frustrated Lewis pairs can promote the heterolytic cleavage and photocatalytic conversion of CO2. This work highlights the potential of utilizing hydrogen bonding-mediated strategy in heterogeneously photocatalytic activation of CO2 over polymer materials.
RESUMO
Electrochemical nitrogen oxide ions reduction reaction (NOx -RR) shows great opportunity for ammonia production under ambient conditions. Yet, performing NOx -RR in strong acidic conditions remains challenging due to the corrosion effect on the catalyst and competing hydrogen evolution reactions. Here, we demonstrate a stable La1.5Sr0.5Ni0.5Fe0.5O4 perovskite oxide for the NOx -RR at pHâ 0, achieving a Faradaic efficiency for ammonia of approaching 100 % at a current density of 2â A cm-2 in a H-type cell. At industrially relevant current density, the NOx -RR system shows stable cell voltage and Faradaic efficiency for >350â h in membrane electrode assembly (MEA) at pHâ 0. By integrating the catalyst in a stacked MEA with a series connection, we have successfully obtained a record-breaking 2.578â g h-1 NH3 production rate at 20â A. This catalyst's unique acid-operability streamlines downstream ammonia utilization for direct ammonium salt production and upstream integration with NOx sources. Techno-economic and lifecycle assessments reveal substantial economic advantages for this ammonia production strategy, even when coupled with a plasma-based NOx production system, presenting a sustainable complement to the conventional Haber-Bosch process.
RESUMO
Abiotic CH4 production driven by Fenton-type reactive oxygen species (ROS) has been confirmed to be an indispensable component of the atmospheric CH4 budget. While the chemical reactions independent of Fenton chemistry to ROS are ubiquitous in nature, it remains unknown whether the produced ROS can drive abiotic CH4 production. Here, we first demonstrated the abiotic CH4 production at the soil-water interface under illumination. Leveraging this finding, polymeric carbon nitrides (CNx) as a typical analogue of natural geobattery material and dimethyl sulfoxide (DMSO) as a natural methyl donor were used to unravel the underlying mechanisms. We revealed that the ROS, photocatalytically produced by CNx, can oxidize DMSO into CH4 with a high selectivity of 91.5 %. Such an abiotic CH4 production process was further expanded to various non-Fenton-type reaction systems, such as electrocatalysis, pyrocatalysis and sonocatalysis. This work provides insights into the geochemical cycle of abiotic CH4, and offers a new route to CH4 production via integrated energy development.
RESUMO
Phosphorene and fullerene are representative two-dimensional (2D) and zero-dimensional (0D) nanomaterials respectively, constructing their heterodimensional hybrid not only complements their physiochemical properties but also extends their applications via synergistic interactions. This is however challenging because of their diversities in dimension and chemical reactivity, and theoretical studies predicted that it is improbable to directly bond C60 onto the surface of phosphorene due to their strong repulsion. Here, we develop a facile electrosynthesis method to synthesize the first phosphorene-fullerene hybrid featuring fullerene surface bonding via P-C bonds. Few-layer black phosphorus nanosheets (BPNSs) obtained from electrochemical exfoliation react with C60 2- dianion prepared by electroreduction of C60, fulfilling formation of the "improbable" phosphorene-fullerene hybrid (BPNS-s-C60). Theoretical results reveal that the energy barrier for formation of [BPNS-s-C60]2- intermediate is significantly decreased by 1.88â eV, followed by an oxidization reaction to generate neutral BPNS-s-C60 hybrid. Surface bonding of C60 molecules not only improves significantly the ambient stability of BPNSs, but also boosts dramatically the visible light and near-infrared (NIR) photocatalytic hydrogen evolution rates, reaching 1466 and 1039â µmol h-1 g-1 respectively, which are both the highest values among all reported BP-based metal-free photocatalysts.
RESUMO
One-unit-cell, single-crystal, hexagonal CuInP2 S6 atomically thin sheets of≈0.81â nm in thickness was successfully synthesized for photocatalytic reduction of CO2 . Exciting ethene (C2 H4 ) as the main product was dominantly generated with the yield-based selectivity reaching ≈56.4 %, and the electron-based selectivity as high as ≈74.6 %. The tandem synergistic effect of charge-enriched Cu-In dual sites confined on the lateral edge of the CuInP2 S6 monolayer (ML) is mainly responsible for efficient conversion and high selectivity of the C2 H4 product as the basal surface site of the ML, exposing S atoms, can not derive the CO2 photoreduction due to the high energy barrier for the proton-coupled electron transfer of CO2 into *COOH. The marginal In site of the ML preeminently targets CO2 conversion to *CO under light illumination, and the *CO then migrates to the neighbor Cu sites for the subsequent C-C coupling reaction into C2 H4 with thermodynamic and kinetic feasibility. Moreover, ultrathin structure of the ML also allows to shorten the transfer distance of charge carriers from the interior onto the surface, thus inhibiting electron-hole recombination and enabling more electrons to survive and accumulate on the exposed active sites for CO2 reduction.
RESUMO
The production of formic acid via electrochemical CO2 reduction may serve as a key link for the carbon cycle in the formic acid economy, yet its practical feasibility is largely limited by the quantity and concentration of the product. Here we demonstrate continuous electrochemical CO2 reduction for formic acid production at 2â M at an industrial-level current densities (i.e., 200â mA cm-2 ) for 300â h on membrane electrode assembly using scalable lattice-distorted bismuth catalysts. The optimized catalysts also enable a Faradaic efficiency for formate of 94.2 % and a highest partial formate current density of 1.16â A cm-2 , reaching a production rate of 21.7â mmol cm-2 h-1 . To assess the practicality of this system, we perform a comprehensive techno-economic analysis and life cycle assessment, showing that our approach can potentially substitute conventional methyl formate hydrolysis for industrial formic acid production. Furthermore, the resultant formic acid serves as direct fuel for air-breathing formic acid fuel cells, boasting a power density of 55â mW cm-2 and an exceptional thermal efficiency of 20.1 %.
RESUMO
While extensive research has been conducted on the conversion of CO2 to C1 products, the synthesis of C2 products still strongly depends on the Cu electrode. One main issue hindering the C2 production on Cu-based catalysts is the lack of an appropriate Cu-Cu distance to provide the ideal platform for the C-C coupling process. Herein, we identify a lab-synthesized artificial enzyme with an optimal Cu-Cu distance, named MIL-53 (Cu) (MIL= Materials of Institute Lavoisier), for CO2 conversion by using a density functional theory method. By substituting the ligands in the porous MIL-53 (Cu) nanozyme with functional groups from electron-donating NH2 to electron-withdrawing NO2, the Cu-Cu distance and charge of Cu can be significantly tuned, thus modulating the adsorption strength of CO2 that impacts the catalytic activity. MIL-53 (Cu) decorated with a COOH-ligand is found to be located at the top of a volcano-shaped plot and exhibits the highest activity and selectivity to reduce CO2 to CH3CH2OH with a limiting potential of only 0.47 eV. In addition, experiments were carried out to successfully synthesize COOH-decorated MIL-53(Cu) to prove its high catalytic performance for C2 production, which resulted in a -55.5% faradic efficiency at -1.19 V vs RHE, which is much higher than the faradic efficiency of the benchmark Cu electrode of 35.7% at -1.05 V vs RHE. Our results demonstrate that the biologically inspired enzyme engineering approach can redefine the structure-activity relationships of nanozyme catalysts and can also provide a new understanding of the catalytic mechanisms in natural enzymes toward the development of highly active and selective artificial nanozymes.
RESUMO
It remains a challenge to design a catalyst with high selectivity at a large current density toward CO2 electrocatalytic reduction (CO2ER) to a single C1 liquid product of methanol. Here, we report the design of a catalyst by integrating MnO2 nanosheets with Pd nanoparticles to address this challenge, which can be implemented in membrane electrode assembly (MEA) electrolyzers for the conversion of CO2ER to methanol. Such a strategy modifies the electronic structure of the catalyst and provides additional active sites, favoring the formation of key reaction intermediates and their successive evolution into methanol. The optimal catalyst delivers a Faradaic efficiency of 77.6 ± 1.3% and a partial current density of 250.8 ± 4.3 mA cm-2 for methanol during CO2ER in an MEA electrolyzer by coupling anodic oxygen evolution reaction with a full-cell energy efficiency achieving 29.1 ± 1.2% at 3.2 V. This work opens a new avenue to the control of C1 intermediates for CO2ER to methanol with high selectivity and activity in an MEA electrolyzer.
RESUMO
In this work, we fabricate a hybrid waveguide-grating vortex laser in Nd:YSAG by using femtosecond laser direct writing (FsLDW). The detailed parameters of the hybrid structure are fixed by optical simulation. In experiments, an efficient vortex beam is produced in the passive operation at 1064â nm. Under optical pumping at 808â nm, a dual-wavelength waveguide laser at 1060/1062â nm as well as a waveguide-grating vortex laser at 1060â nm are obtained. The laser performance and diffraction properties of the generated vortex laser are detailed, studied, and discussed, providing meaningful reference results toward the practical applications of FsLDW and waveguide-grating structures in integrated photonics.
RESUMO
Development of cost-effective oxide catalysts holds the key to the removal of toluene, one of the most important volatile organic compounds. However, the catalysts follow varied working mechanisms at different reaction temperatures, posing a challenge to achieving efficient toluene removal over a wide temperature range. Here we report an agitation-assisted molten salt method, which achieves the rational doping on a two-dimensional Co3O4 catalyst and forms two different structures of active sites to enhance catalytic oxidation of toluene in specific temperature intervals, enabling a facile tandem design for working in a wide temperature range. Specifically, Co3O4 is doped with Cu at the octahedral site (Cu-Co3O4) and Zn at the tetrahedral site (Zn-Co3O4) to form CuOh-O-CoTe and ZnTe-O-CoOh structures on the surface, respectively. Mechanistic studies reveal the different working mechanisms of these two active sites toward remarkable performance enhancement at specific temperature intervals, and the improved performance derived from accelerated consumption of intermediates adsorbed on the catalyst surface. Taken together, Cu-Co3O4 and Zn-Co3O4 achieve excellent toluene purification performance over a wide temperature range. This work provides insights into the mechanism-oriented design of active sites at the atomic level.
Assuntos
Cobalto , Tolueno , Temperatura , CatáliseRESUMO
It is an appealing approach to CO2 utilization through CO2 electroreduction (CO2 ER) to ethanol at high current density; however, the commonly used Cu-based catalysts cannot sustain large current during CO2 ER despite their capability for ethanol production. Herein, we report that Ag+ -doped InSe nanosheets with Se vacancies can address this grand challenge in a membrane electrode assembly (MEA) electrolyzer. As revealed by our experimental characterization and theoretical calculation, the Ag+ doping, which can tailor the electronic structure of InSe while diversifying catalytically active sites, enables the formation of key reaction intermediates and their sequential evolution into ethanol. More importantly, such a material can well work for large-current conditions in MEA electrolyzers with In2+ species stabilized via electron transfer from Ag to Se. Remarkably, in an MEA electrolyzer by coupling cathodic CO2 ER with anodic oxygen evolution reaction (OER), the optimal catalyst exhibits an ethanol Faradaic efficiency of 68.7 % and a partial current density of 186.6â mA cm-2 on the cathode with a full-cell ethanol energy efficiency of 26.1 % at 3.0â V. This work opens an avenue for large-current production of ethanol from CO2 with high selectivity and energy efficiency by rationally designing electrocatalysts.