RESUMO
Cystatin M/E (encoded by the CST6 gene) is a cysteine protease inhibitor, that exerts regulatory and protective effects against uncontrolled proteolysis mainly by directly regulating cathepsin V, cathepsin L, and legumain activities. Previous studies have suggested that CST6 may exert a regulatory role in epidermal differentiation and hair follicle formation by inhibiting the activity of respective cognate target proteases. However, until recently, studies have revealed that loss- or gain-of-function of the CST6 gene causes dry skin with hypotrichosis in humans. Here, we reported two siblings of Chinese origin with dry skin, desquamation and abnormal keratosis without hypotrichosis. By applying whole-exome sequencing, we identified homozygous loss-of-function mutation c.251G > A (p.Gly84Asp) in the CST6 gene as the underlying genetic cause. Further fluorimetric enzyme assays demonstrated the mutant cystatin M/E protein lost its inhibitory function on the protease activity of cathepsins. Moreover, the corresponding mutation in mice resulted in excessive cornification, desquamation, impaired skin barrier function, and abnormal proliferation and differentiation of keratinocytes. In conclusion, the homozygous missense mutation c.251G > A in CST6 gene resulted in dry skin, desquamation, as well as abnormal keratosis of the skin, promoting our understanding of the role of protease-antiprotease balance in human skin disorders.
Assuntos
Hipotricose , Ceratose , Humanos , Animais , Camundongos , Epiderme/metabolismo , Cistatina M/genética , Cistatina M/metabolismo , Peptídeo Hidrolases/genética , Peptídeo Hidrolases/metabolismo , Hipotricose/genética , Mutação/genéticaRESUMO
BACKGROUND: Keloids represent one extreme of aberrant dermal wound healing and are characterized by fibroblast hyperproliferation and excessive deposition of extracellular matrix. Genetics is a major factor for predisposition to keloids and genome-wide association study has identified a single-nucleotide polymorphism (SNP) rs873549 at 1q41 as a susceptibility locus. The SNP rs873549, and the SNPs in strong linkage disequilibrium (LD) with rs873549, may be involved in keloid development. However, the functional significance of these SNPs in keloid pathogenesis remains elusive. OBJECTIVES: To investigate the function and mechanism of SNP rs873549 and the SNPs in strong LD with rs873549 in keloids. METHODS: SNPs in strong LD with rs873549 were analysed using Haploview. The expression levels of the genes near the susceptibility locus were analysed using quantitative real-time polymerase chain reaction. The interaction between rs1348270-containing enhancer and the long noncoding RNA down expressed in keloids (DEIK) (formerly RP11-400N13.1) promoter in fibroblasts was investigated using chromosome conformation capture. The enhancer activity of the rs1348270 locus was evaluated using luciferase reporter assay. Knockdown experiments were used to explore the function of DEIK in keloids. RNA-Seq was performed to investigate the mechanism by which DEIK regulates the expression of collagens POSTN and COMP. RESULTS: rs1348270, an enhancer-located SNP in strong LD with rs873549, mediated looping with the promoter of DEIK. The risk variant was associated with decreased enhancer-promoter interaction and DEIK down-expression in keloids. Mechanistically, downregulation of DEIK increased the expression of collagens POSTN and COMP through upregulating BMP2. Furthermore, correlation analysis revealed that DEIK expression was inversely correlated with BMP2, POSTN and COMP expression in both keloid and normal fibroblasts. CONCLUSIONS: Our findings suggest that the risk variant rs1348270 is located in an enhancer and is associated with the downregulation of DEIK in keloids, and that downregulation of DEIK increases the expression of collagens POSTN and COMP through BMP2 in keloid fibroblasts. These findings will help to provide a more thorough understanding of the role played by genetic factors in keloid development and may lead to new strategies for screening and therapy in keloid-susceptible populations.
Assuntos
Queloide , RNA Longo não Codificante , Humanos , Queloide/patologia , Polimorfismo de Nucleotídeo Único , RNA Longo não Codificante/metabolismo , Estudo de Associação Genômica Ampla , Regiões Promotoras Genéticas , Fibroblastos/metabolismoRESUMO
Keloids are benign fibroproliferative diseases with abnormally proliferated bulges beyond the edge of the skin lesions, and they are characterized by uncontrolled fibroblast proliferation and excessive extracellular matrix deposition in the dermis. However, the definite mechanisms that increase fibroblast proliferation and collagen deposition in keloids remain unclear. Thrombospondin 1 (TSP1) has been suggested to play an important role in wound healing and fibrotic disorders, but its role in keloids is unknown. In this study, we aimed to clarify the specific role of TSP1 in keloids and explore the potential mechanism. Our results demonstrated that TSP1 was highly expressed in keloid lesions compared to normal skin. Knockdown of TSP1 in keloid fibroblasts decreased cell proliferation and collagen I deposition. Exogenous TSP1 treatment increased cell proliferation and collagen I deposition in normal fibroblasts. We further investigated the underlying mechanism and found that TSP1 promoted fibroblast proliferation and extracellular matrix deposition by upregulating the IL6/JAK2/STAT3 pathway. Moreover, we verified that TSP1 expression was positively correlated with IL6/STAT3 signalling activity in keloids. Taken together, our findings indicate that TSP1 promotes keloid development via the IL6/JAK2/STAT3 signalling pathway and blocking TSP1 may represent a potential strategy for keloid therapy.
Assuntos
Queloide , Fatores de Transcrição de Zíper de Leucina e Hélice-Alça-Hélix Básicos , Proliferação de Células , Células Cultivadas , Colágeno/metabolismo , Colágeno Tipo I/metabolismo , Matriz Extracelular/metabolismo , Fibroblastos/metabolismo , Humanos , Interleucina-6/metabolismo , Janus Quinase 2/metabolismo , Queloide/metabolismo , Fator de Transcrição STAT3/metabolismo , Trombospondina 1/metabolismoRESUMO
The objective of this study is to identify effective engineering methods for controlling handheld workpiece vibration during grinding processes. Prolonged and intensive exposures to such vibration can cause hand-arm vibration syndrome among workers performing workpiece grinding, but how to effectively control these exposures remains an important issue. This study developed a methodology for performing their analyses and evaluations based on a model of the entire grinding machine-workpiece-hand-arm system. The model can simulate the vibration responses of a workpiece held in the worker's hands and pressed against a grinding wheel in order to shape the workpiece in the major frequency range of concern (6.3-1600 Hz). The methodology was evaluated using available experimental data. The results suggest that the methodology is acceptable for these analyses and evaluations. The results also suggest that the workpiece vibration resulting from the machine vibration generally depends on two mechanisms or pathways: (1) the direct vibration transmission from the grinding machine; and (2) the indirect transmission that depends on both the machine vibration transmission to the workpiece and the interface excitation transformation to the workpiece vibration. The methodology was applied to explore and/or analyze various engineering methods for controlling workpiece vibrations. The modeling results suggest that while these intervention methods have different advantages and limitations, some of their combinations can effectively reduce the vibration exposures of grinding workers. These findings can be used as guidance for selecting and developing more effective technologies to control handheld workpiece vibration exposures.
RESUMO
The objective of this study was to develop a convenient and reliable adapter method for testing and evaluating vibration-reducing (VR) gloves and VR materials at the fingers. The general requirements and technical specifications for the design of the new adapter were based on our previous studies of hand-held adapters for vibration measurement and a conceptual model of the fingers-adapter-glove-handle system developed in this study. Two thicknesses (2 mm and 3 mm) of the adapter beam were fabricated using a 3-D printer. Each adapter is a thin beam equipped with a miniature tri-axial accelerometer (1.1 g) mounted at its center, with a total weight ≤ 2.2 g. To measure glove vibration transmissibility, the adapter is held with two gloved fingers; a finger is positioned on each side of the accelerometer. Each end of the adapter beam is slotted between the glove material and the finger. A series of experiments was conducted to evaluate this two-fingers-held adapter method by measuring the transmissibility of typical VR gloves and a sample VR material. The experimental results indicate that the major resonant frequency of the lightweight adapter on the VR material (≥800 Hz) is much higher than the resonant frequencies of the gloved fingers grasping a cylindrical handle (≤300 Hz). The experimental results were repeatable across the test treatments. The basic characteristics of the measured glove vibration transmissibility are consistent with the theoretical predictions based on the biodynamics of the gloved fingers-hand-arm system. The results suggest that VR glove fingers can effectively reduce only high-frequency vibration, and VR effectiveness can be increased by reducing the finger contact force. This study also demonstrated that the finger adapter method can be combined with the palm adapter method prescribed in the standardized glove test, which can double the test efficiency without substantially increasing the expense of the test.
RESUMO
Mitochondria-targeted selective autophagy, termed mitophagy, is an evolutionarily conserved process that contributes to mitochondrial quantity and quality control. Mitophagy requires elaborate membrane biogenesis of autophagosomes surrounding mitochondria, although how this process is regulated remains obscure. We show here that mitophagy is strongly suppressed in yeast cells lacking Nem1 or Spo7, two proteins forming a heterodimeric protein phosphatase complex known to be important for proper shaping of the nucleus and endoplasmic reticulum (ER). Under the same conditions, selective degradation of the ER and peroxisomes was also suppressed strongly and to a lesser extent, respectively, whereas autophagy and the cytoplasm to vacuole targeting (Cvt) pathway were only slightly affected in those mutants. We also found that mitochondrial sequestration in the cytoplasm and their degradation in the vacuole, a lytic compartment in yeast, occurred poorly but did not completely arrest. Notably, deletion of the INO2 gene in the nem1-or spo7-null mutant partially rescued nuclear/ER membrane shaping and mitophagy. Together, our data suggest that Nem1-Sop7-mediated regulation of membrane biogenesis is needed to promote mitophagy in yeast.
Assuntos
Proteínas de Membrana/metabolismo , Mitocôndrias/metabolismo , Mitofagia/fisiologia , Proteínas Nucleares/metabolismo , Fosfoproteínas Fosfatases/metabolismo , Proteínas de Saccharomyces cerevisiae/metabolismo , Saccharomyces cerevisiae/metabolismo , Mitocôndrias/ultraestrutura , Saccharomyces cerevisiae/citologiaRESUMO
This study conducted two series of experiments to investigate the relationships between hand coupling force and biodynamic responses of the hand-arm system. In the first experiment, the vibration transmissibility on the system was measured as a continuous function of grip force while the hand was subjected to discrete sinusoidal excitations. In the second experiment, the biodynamic responses of the system subjected to a broadband random vibration were measured under five levels of grip forces and a combination of grip and push forces. This study found that the transmissibility at each given frequency increased with the increase in the grip force before reaching a maximum level. The transmissibility then tended to plateau or decrease when the grip force was further increased. This threshold force increased with an increase in the vibration frequency. These relationships remained the same for both types of vibrations. The implications of the experimental results are discussed. Practitioner Summary: Shocks and vibrations transmitted to the hand-arm system may cause injuries and disorders of the system. How to take hand coupling force into account in the risk assessment of vibration exposure remains an important issue for further studies. This study is designed and conducted to help resolve this issue.
Assuntos
Braço/fisiologia , Força da Mão/fisiologia , Mãos/fisiologia , Vibração/efeitos adversos , Trabalho/fisiologia , Adolescente , Adulto , Fenômenos Biomecânicos , Humanos , Masculino , Exposição Ocupacional/efeitos adversos , Adulto JovemRESUMO
Workers who operate mine haul trucks are exposed to whole-body vibration (WBV) on a routine basis. Researchers from the National Institute for Occupational Safety and Health (NIOSH) Pittsburgh Mining Research Division (PMRD) investigated WBV and hand-arm vibration (HAV) exposures for mine/quarry haul truck drivers in relation to the haul truck activities of dumping, loading, and traveling with and without a load. The findings show that WBV measures in weighted root-mean-square accelerations (aw) and vibration dose value (VDV), when compared to the ISO/ANSI and European Directive 2002/44/EC standards, were mostly below the Exposure Action Value (EAV) identified by the health guidance caution zone (HGCZ). Nevertheless, instances were recorded where the Exposure Limit Value (ELV) was exceeded by more than 500 to 600 percent for VDVx and awx, respectively. Researchers determined that these excessive levels occurred during the traveling empty activity, when the haul truck descended down grade into the pit loading area, sliding at times, on a wet and slippery road surface caused by rain and overwatering. WBV levels (not normalized to an 8-h shift) for the four haul truck activities showed mean awz levels for five of the seven drivers exceeding the ISO/ANSI EAV by 9-53 percent for the traveling empty activity. Mean awx and awz levels were generally higher for traveling empty and traveling loaded and lower for loading/dumping activities. HAV for measures taken on the steering wheel and shifter were all below the HGCZ which indicates that HAV is not an issue for these drivers/operators when handling steering and shifting control devices.
RESUMO
Falls from mobile equipment are reported at surface mine quarry operations each year in considerable numbers. Research shows that a preponderance of falls occur while getting on/off mobile equipment. Contributing factors to the risk of falls include the usage of ladders, exiting onto a slippery surface, and foot or hand slippage. Balance issues may also contribute to fall risks for mobile equipment operators who are exposed to whole-body vibration (WBV). For this reason, the National Institute for Occupational Safety and Health, Office of Mine Safety and Health Research conducted a study at four participating mine sites with seven haul truck operators. The purpose was to ascertain whether WBV and hand-arm vibration (HAV) exposures for quarry haul truck operators were linked to short-term decreases in performance in relation to postural stability, touch sensation threshold, and grip strength that are of crucial importance when getting on/off the trucks. WBV measures of frequency-weighted RMS accelerations (wRMS) and vibration dose value (VDV), when compared to the ISO/ANSI standards, were mostly below levels identified for the Health Guidance Caution Zone (HGCZ), although there were instances where the levels were within and above the specified Exposure Action Value. Comparably, all mean HAV levels, when compared to the ISO/ANSI standards, were below the HGCZ. For the existing conditions and equipment, no significant correlation could be identified between the WBV, HAV, postural stability, touch sensation threshold, and grip strength measures taken during this study.
RESUMO
Some powered hand tools can generate significant vibration at frequencies below 25 Hz. It is not clear whether such vibration can be effectively transmitted to the upper arm, shoulder, neck, and head and cause adverse effects in these substructures. The objective of this study is to investigate the vibration transmission from the human hands to these substructures. Eight human subjects participated in the experiment, which was conducted on a 1-D vibration test system. Unlike many vibration transmission studies, both the right and left hand-arm systems were simultaneously exposed to the vibration to simulate a working posture in the experiment. A laser vibrometer and three accelerometers were used to measure the vibration transmitted to the substructures. The apparent mass at the palm of each hand was also measured to help in understanding the transmitted vibration and biodynamic response. This study found that the upper arm resonance frequency was 7-12 Hz, the shoulder resonance was 7-9 Hz, and the back and neck resonances were 6-7 Hz. The responses were affected by the hand-arm posture, applied hand force, and vibration magnitude. The transmissibility measured on the upper arm had a trend similar to that of the apparent mass measured at the palm in their major resonant frequency ranges. The implications of the results are discussed. RELEVANCE TO INDUSTRY: Musculoskeletal disorders (MSDs) of the shoulder and neck are important issues among many workers. Many of these workers use heavy-duty powered hand tools. The combined mechanical loads and vibration exposures are among the major factors contributing to the development of MSDs. The vibration characteristics of the body segments examined in this study can be used to help understand MSDs and to help develop more effective intervention methods.
RESUMO
To control vibration-induced white finger among workers performing the fine grinding of golf club heads, the aims of this study are to clarify the major vibration sources in the grinding process, to identify and understand the basic characteristics of the club head vibration, and to propose potential approaches for reducing the vibration exposure. The vibrations on two typical club heads and two belt grinding machines were measured at a workplace. A simulated test station was also constructed and used to help examine some influencing factors of the club head vibration. This study found that the club head vibration was the combination of the vibration transmitted from the grinding machines and that generated in the grinding process. As a result, any factor that affects the machine vibration, the grinding vibration, and/or the dynamic response of the club head can influence the vibration exposure of the fingers or hands holding the club head in the grinding process. The significant influencing factors identified in the study include testing subject, grinding machine, machine operation speed, drive wheel condition, club head model, mechanical constraints imposed on the club head during the grinding, and machine foot pad. These findings suggest that the vibration exposure can be controlled by reducing the grinding machine vibration, changing the workpiece dynamic properties, and mitigating the vibration transmission in its pathway. Many potential methods for the control are proposed and discussed. RELEVANCE TO INDUSTRY: Vibrations on handheld workpieces can be effectively transmitted to the hands, especially the fingers. As a result, a major component of the hand-arm vibration syndrome - vibration-induced white finger - has been observed among some workers performing the grinding and/or polishing tasks of the handheld workpieces such as golf club heads. The results of this study can be used to develop more effective methods and technologies to control the vibration exposure of these workers. This may help effectively control this occupational disease.
RESUMO
Mechanical arm systems are commonly used to support powered hand tools to alleviate ergonomic stressors related to the development of workplace musculoskeletal disorders. However, the use of these systems can increase exposure times to other potentially harmful agents such as hand-transmitted vibration. To examine how these tool support systems affect tool vibration, the primary objectives of this study were to characterize the vibration emissions of typical portable pneumatic grinders used for surface grinding with and without a mechanical arm support system at a workplace and to estimate the potential risk of the increased vibration exposure time afforded by the use of these mechanical arm systems. This study also developed a laboratory-based simulated grinding task based on the ISO 28927-1 (2009) standard for assessing grinder vibrations; the simulated grinding vibrations were compared with those measured during actual workplace grinder operations. The results of this study demonstrate that use of the mechanical arm may provide a health benefit by reducing the forces required to lift and maneuver the tools and by decreasing hand-transmitted vibration exposure. However, the arm does not substantially change the basic characteristics of grinder vibration spectra. The mechanical arm reduced the average frequency-weighted acceleration by about 24% in the workplace and by about 7% in the laboratory. Because use of the mechanical arm system can increase daily time-on-task by 50% or more, the use of such systems may actually increase daily time-weighted hand-transmitted vibration exposures in some cases. The laboratory acceleration measurements were substantially lower than the workplace measurements, and the laboratory tool rankings based on acceleration were considerably different than those from the workplace. Thus, it is doubtful that ISO 28927-1 is useful for estimating workplace grinder vibration exposures or for predicting workplace grinder acceleration rank orders.
Assuntos
Exposição Ocupacional , Medição de Risco/métodos , Vibração , Braço , Transtornos Traumáticos Cumulativos/prevenção & controle , Mãos/fisiologia , Síndrome da Vibração do Segmento Mão-Braço/prevenção & controle , Humanos , Vibração/efeitos adversos , Local de TrabalhoRESUMO
Sheet metal workers operating rivet bucking bars are at risk of developing hand and wrist musculoskeletal disorders associated with exposures to hand-transmitted vibrations and forceful exertions required to operate these hand tools. New bucking bar technologies have been introduced in efforts to reduce workplace vibration exposures to these workers. However, the efficacy of these new bucking bar designs has not been well documented. While there are standardized laboratory-based methodologies for assessing the vibration emissions of many types of powered hand tools, no such standard exists for rivet bucking bars. Therefore, this study included the development of a laboratory-based method for assessing bucking bar vibrations which utilizes a simulated riveting task. With this method, this study evaluated three traditional steel bucking bars, three similarly shaped tungsten alloy bars, and three bars featuring spring-dampeners. For comparison the bucking bar vibrations were also assessed during three typical riveting tasks at a large aircraft maintenance facility. The bucking bars were rank-ordered in terms of unweighted and frequency-weighted acceleration measured at the hand-tool interface. The results suggest that the developed laboratory method is a reasonable technique for ranking bucking bar vibration emissions; the lab-based riveting simulations produced similar rankings to the workplace rankings. However, the laboratory-based acceleration averages were considerably lower than the workplace measurements. These observations suggest that the laboratory test results are acceptable for comparing and screening bucking bars, but the laboratory measurements should not be directly used for assessing the risk of workplace bucking bar vibration exposures. The newer bucking bar technologies exhibited significantly reduced vibrations compared to the traditional steel bars. The results of this study, together with other information such as rivet quality, productivity, tool weight, comfort, worker acceptance, and initial cost can be used to make informed bucking bar selections.
Assuntos
Laboratórios , Exposição Ocupacional/análise , Vibração , Local de Trabalho , Aeronaves , Indústria da Construção/instrumentação , Mãos , Síndrome da Vibração do Segmento Mão-Braço/prevenção & controle , Humanos , Doenças Profissionais , Exposição Ocupacional/efeitos adversos , Medição de Risco , Vibração/efeitos adversosRESUMO
The objective of this study is to evaluate an adapter method for measuring the vibration on the human arms. Four instrumented adapters with different weights were used to measure the vibration transmitted to the wrist, forearm, and upper arm of each subject. Each adapter was attached at each location on the subjects using an elastic cloth wrap. Two laser vibrometers were also used to measure the transmitted vibration at each location to evaluate the validity of the adapter method. The apparent mass at the palm of the hand along the forearm direction was also measured to enhance the evaluation. This study found that the adapter and laser-measured transmissibility spectra were comparable with some systematic differences. While increasing the adapter mass reduced the resonant frequency at the measurement location, increasing the tightness of the adapter attachment increased the resonant frequency. However, the use of lightweight (≤15 g) adapters under medium attachment tightness did not change the basic trends of the transmissibility spectrum. The resonant features observed in the transmissibility spectra were also correlated with those observed in the apparent mass spectra. Because the local coordinate systems of the adapters may be significantly misaligned relative to the global coordinates of the vibration test systems, large errors were observed for the adapter-measured transmissibility in some individual orthogonal directions. This study, however, also demonstrated that the misalignment issue can be resolved by either using the total vibration transmissibility or by measuring the misalignment angles to correct the errors. Therefore, the adapter method is acceptable for understanding the basic characteristics of the vibration transmission in the human arms, and the adapter-measured data are acceptable for approximately modeling the system.
RESUMO
The objective of this study is to enhance the understanding of the vibration transmission in the hand-arm system in three orthogonal directions (X, Y, and Z). For the first time, the transmitted vibrations distributed on the entire hand-arm system exposed in the three orthogonal directions via a 3-D vibration test system were measured using a 3-D laser vibrometer. Seven adult male subjects participated in the experiment. This study confirms that the vibration transmissibility generally decreased with the increase in distance from the hand and it varied with the vibration direction. Specifically, to the upper arm and shoulder, only moderate vibration transmission was measured in the test frequency range (16 to 500 Hz), and virtually no transmission was measured in the frequency range higher than 50 Hz. The resonance vibration on the forearm was primarily in the range of 16-30 Hz with the peak amplitude of approximately 1.5 times of the input vibration amplitude. The major resonance on the dorsal surfaces of the hand and wrist occurred at around 30-40 Hz and, in the Y direction, with peak amplitude of more than 2.5 times of the input amplitude. At higher than 50 Hz, vibration transmission was effectively limited to the hand and fingers. A major finger resonance was observed at around 100 Hz in the X and Y directions and around 200 Hz in the Z direction. In the fingers, the resonance magnitude in the Z direction was generally the lowest, and the resonance magnitude in the Y direction was generally the highest with the resonance amplitude of 3 times the input vibration, which was similar to the transmissibility at the wrist and hand dorsum. The implications of the results are discussed. RELEVANCE TO INDUSTRY: Prolonged, intensive exposure to hand-transmitted vibration could result in hand-arm vibration syndrome. While the syndrome's precise mechanisms remain unclear, the characterization of the vibration transmissibility of the system in the three orthogonal dimensions performed in this study can help understand the syndrome and help develop improved frequency weightings for assessing the risk of the exposure for developing various components of the syndrome.
RESUMO
A novel bioinspired approach for ordered mesoporous silica was developed on the basis of the synergic coassembly between polyamine and an anionic surfactant as a template. With the help of cationic polyamine, anionic surfactant micelles could be utilized as a mesostructure template, whereas with the aid of the anionic surfactant micelles the cationic polyamine chains underwent aggregation to exert their ability to induce silica condensation. Mesoporous silicas with well-ordered mesostructure of Fd-3m symmetry and 3D hexagonal close-packed mesostructure (hcp) were fabricated. Because of the abundant types of anionic surfactants and polyamines, the synthesis approach can be regarded as a general method for anionic-surfactant-templated mesoporous silica, and new mesostructures and morphologies are expected.
Assuntos
Poliaminas/química , Dióxido de Silício/química , Tensoativos/química , Ânions/química , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
Vibration-reducing (VR) gloves have been used to reduce the hand-transmitted vibration exposures from machines and powered hand tools but their effectiveness remains unclear, especially for finger protection. The objectives of this study are to determine whether VR gloves can attenuate the vibration transmitted to the fingers and to enhance the understanding of the mechanisms of how these gloves work. Seven adult male subjects participated in the experiment. The fixed factors evaluated include hand force (four levels), glove condition (gel-filled, air bladder, no gloves), and location of the finger vibration measurement. A 3-D laser vibrometer was used to measure the vibrations on the fingers with and without wearing a glove on a 3-D hand-arm vibration test system. This study finds that the effect of VR gloves on the finger vibration depends on not only the gloves but also their influence on the distribution of the finger contact stiffness and the grip effort. As a result, the gloves increase the vibration in the fingertip area but marginally reduce the vibration in the proximal area at some frequencies below 100 Hz. On average, the gloves reduce the vibration of the entire fingers by less than 3% at frequencies below 80 Hz but increase at frequencies from 80 to 400 Hz. At higher frequencies, the gel-filled glove is more effective at reducing the finger vibration than the air bladder-filled glove. The implications of these findings are discussed. RELEVANCE TO INDUSTRY: Prolonged, intensive exposure to hand-transmitted vibration can cause hand-arm vibration syndrome. Vibration-reducing gloves have been used as an alternative approach to reduce the vibration exposure. However, their effectiveness for reducing finger-transmitted vibrations remains unclear. This study enhanced the understanding of the glove effects on finger vibration and provided useful information on the effectiveness of typical VR gloves at reducing the vibration transmitted to the fingers. The new results and knowledge can be used to help select appropriate gloves for the operations of powered hand tools, to help perform risk assessment of the vibration exposure, and to help design better VR gloves.
RESUMO
Vibration-reducing (VR) gloves have been increasingly used to help reduce vibration exposure, but it remains unclear how effective these gloves are. The purpose of this study was to estimate tool-specific performances of VR gloves for reducing the vibrations transmitted to the palm of the hand in three orthogonal directions (3-D) in an attempt to assess glove effectiveness and aid in the appropriate selection of these gloves. Four typical VR gloves were considered in this study, two of which can be classified as anti-vibration (AV) gloves according to the current AV glove test standard. The average transmissibility spectrum of each glove in each direction was synthesized based on spectra measured in this study and other spectra collected from reported studies. More than seventy vibration spectra of various tools or machines were considered in the estimations, which were also measured in this study or collected from reported studies. The glove performance assessments were based on the percent reduction of frequency-weighted acceleration as is required in the current standard for assessing the risk of vibration exposures. The estimated tool-specific vibration reductions of the gloves indicate that the VR gloves could slightly reduce (<5%) or marginally amplify (<10%) the vibrations generated from low-frequency (<25 Hz) tools or those vibrating primarily along the axis of the tool handle. With other tools, the VR gloves could reduce palm-transmitted vibrations in the range of 5%-58%, primarily depending on the specific tool and its vibration spectra in the three directions. The two AV gloves were not more effective than the other gloves with some of the tools considered in this study. The implications of the results are discussed. RELEVANCE TO INDUSTRY: Hand-transmitted vibration exposure may cause hand-arm vibration syndrome. Vibration-reducing gloves are considered as an alternative approach to reduce the vibration exposure. This study provides useful information on the effectiveness of the gloves when used with many tools for reducing the vibration transmitted to the palm in three directions. The results can aid in the appropriate selection and use of these gloves.
RESUMO
OBJECTIVE: This study described the effects of applied force (grip) on vascular and sensorineural function in an animal model of hand-arm vibration syndrome (HAVS). METHODS: Rat tails were exposed to 0, 2, or 4 N of applied force 4 hr/d for 10 days. Blood flow and sensitivity to transcutaneous electrical stimulation and pressure were measured. RESULTS: Applied force increased blood flow but reduced measures of arterial plasticity. Animals exposed to force tended to be more sensitive to 250-Hz electrical stimulation and pressure applied to the tail. CONCLUSIONS: Effects of applied force on blood flow and sensation are different than those of vibration. Studies examining co-exposures to force and vibration will provide data that can be used to determine how these factors affect risk of workers developing vascular and sensorineural dysfunction (ie, HAVS).
Assuntos
Síndrome da Vibração do Segmento Mão-Braço , Doenças Profissionais , Exposição Ocupacional , Ratos , Animais , Vibração/efeitos adversosRESUMO
Hydroxyl radicals (·OH) produced in subsurface sediments play an important role in biogeochemical cycles. One of the major sources of·OH in sediments is associated with reduced compounds (e.g., iron and organic matter) oxygenation. Moreover, the properties of iron forms and dissolved organic matter (DOM) components varied significantly across redox-fluctuation zones of estuaries. However, the influence of these variations on mechanisms of·OH production in estuaries remains unexplored. Herein, sediments from riparian zones, wetlands, and rice fields in the Yellow River Estuary were collected to systematically explore the diverse mechanisms of·OH generation. Rhythmic continuous·OH production (82-730 µmol/kg) occurred throughout the estuary, demonstrating notable spatial heterogeneity. The amorphous iron form and humic-like DOM components were the key contributors to·OH accumulation in estuary wetlands and freshwater restoration wetlands, respectively. The crystalline iron form and protein-like DOM components influenced the capabilities of iron reduction and continuous·OH production. Moreover, the orthogonal partial least squares models outperformed various multivariate models in screening crucial factors and predicting the spatiotemporal production of·OH. This study provides novel insights into varied mechanisms of·OH generation within distinct redox-fluctuation zones in estuaries and further elucidates elemental behavior and contaminant fate in estuarine environments. ENVIRONMENTAL IMPLICATION: Given that estuaries serve as sinks for anthropogenic pollutants, various organic pollutants (e.g., emerging contaminants such as antibiotics) have been widely detected in estuarine environments. The production of·OH in sediments has been proven to affect the fate of contaminants. Therefore, the varied mechanisms of·OH in estuarine environments, dominated by diverse iron forms and DOM components, were explored in this study. MLR and OPLS models exhibited good performance in screening crucial factors and predicting·OH production. Our work highlights that in estuarine subsurface environments, the presence of·OH potentially leads to a natural degradation of pollutants.