RESUMO
Current near-field antenna measurement methods are commonly based on metal probes, with the accuracy limited and hard to be optimized due to the drawbacks they suffered, such as large volume, severe metal reflection/interference and complex circuit signal processing in parameter extracting. In this work, a novel method is proposed based on Rydberg atom in the near-field antenna measurement, which can offer a higher accuracy due to its intrinsic character of traceability to electric field. Replacing the metal probe in near-field measurement system by Rydberg atoms contained in a vapor cell (probe), amplitude- and phase- measurements on a 2.389â GHz signal launched out from a standard gain horn antenna are conducted on a near-field plane. They are transformed to far-field pattern and agree well with simulated results and measured results by using a traditional metal probe method. A high precision in longitudinal phase testing with an error below 1.7% can be achieved.
RESUMO
Researchers are interested in the sensor based on Rydberg atoms because of its broad testing frequency range and outstanding sensitivity. However, the discrete frequency detection limits its further employment. We expand the frequency range of microwaves using Rydberg atoms under the Zeeman effect. In such a scheme, the magnetic field is employed as a tool to split and modify adjacent Rydberg level intervals to realize tunable frequency measurement over 100 MHz under 0-31.5 Gauss magnetic field. In this frequency range, the microwave has a linear dynamic variation range of 63â dB, and has achieved a sensitivity of 11.72 µV cm-1Hz-1/2 with the minimum detectable field strength of 17.2 µV/cm.. Compared to the no magnetic field scenario, the sensitivity would not decrease. By theoretical analysis, in a strong magnetic field, the tunable frequency range can be much larger than 100â MHz. The proposed method for achieving tunable frequency measurement provides a crucial tool in radars and communication.
RESUMO
Color non-uniformities caused by a dispersion effect can seriously affect the image quality for a diffractive waveguide display system. In this work, we propose a subwavelength multilayered dielectric grating structure by a rigorous coupled wave analysis as a novel coupling grating, to the best of our knowledge, for waveguide-based near-eye displays to overcome the "rainbow" effect. Such a grating structure exhibits a tunable high-efficiency resonance in first-order diffraction due to resonant coupling of incident light with the grating structure. A further analysis of the resonant behaviors helps us get a clear understanding of the underlying physics for the mode excitation and resonant coupling process. The first-order resonance with a diffraction efficiency of more than 60% can be achieved with the resonant angle continuously shifted to get a large field of view. The resonant angle, diffraction efficiency, and spectral linewidth can be easily tuned by the geometrical parameters of the grating structure.
RESUMO
We propose a method to construct a compact dual focal-plane optical see-through near-eye display using diffractive waveguides and multiple lenses. A virtual image from a display device is projected into a three-grating waveguide using an objective lens, and a virtual image can be shown at a far distance with an extended eye box. One negative lens is employed to reduce the focus distance of the virtual image, and a corresponding positive lens is used to compensate for the distortion and accommodation errors. Thus, not only can a virtual image with a near distance be achieved, but also a virtual plane with a further distance can be generated by introducing another projection module and waveguide. Only two waveguides and two pieces of lenses are used in front of one eye to obtain a lightweight outlook. To verify the proposed method, a proof-of-concept prototype was developed to provide vivid virtual images at different depths in front of the human eye.
Assuntos
Lentes , Humanos , Imagem ÓpticaRESUMO
The method of using millimeter-wave radar sensors to detect human vital signs, namely respiration and heart rate, has received widespread attention in non-contact monitoring. These sensors are compact, lightweight, and able to sense and detect various scenarios. However, it still faces serious problems of noisy interference in hardware, which leads to a low signal-to-noise ratio (SNR). We used a frequency-modulated continuous wave (FMCW) radar sensor operating at 77 GHz in an office environment to extract the respiration and heart rate of a person accustomed to sitting in a chair. Indeed, the proposed signal processing includes novel impulse denoising operations and the spectral estimation decision method, which are unique in terms of noise reduction and accuracy improvement. In addition, the proposed method provides high-quality, repeatable respiration and heart rates with relative errors of 1.33% and 1.96% on average compared with the reference values measured by a reliable smart bracelet.
Assuntos
Radar , Sinais Vitais , Algoritmos , Frequência Cardíaca/fisiologia , Humanos , Monitorização Fisiológica/métodos , Respiração , Processamento de Sinais Assistido por ComputadorRESUMO
Designing diffractive waveguides for head-mounted displays requires wide-angle conical diffraction analysis of multiple gratings. In this work, diffractive waveguide design using the relative direction cosine space, which extends the direction cosine space to a relative space involving refractive indices and can describe grating diffraction through various media, is demonstrated. A diffractive waveguide was fabricated with grating periods of 382 and 270 nm, which generated a monochromatic virtual image image in green light (520 nm). The maximum field of view was measured as 39° with 0.5° deviation from the center of view.