An OBP gene highly expressed in non-chemosensory tissues affects the phototaxis and reproduction of Spodoptera frugiperda.

Insect odorant binding proteins (OBPs) were initially regarded as carriers of the odorants involved in chemosensation. However, it had been observed that a growing number of OBP genes exhibited broad expression patterns beyond chemosensory tissues. Here, an OBP gene (OBP31) was found to be highly expressed in the larval ventral nerve cord, adult brain and male reproductive organ of Spodoptera frugiperda. An OBP31 knockout strain (OBP31-/- ) was generated by CRISPR/Cas9 mutagenesis. For OBP31-/- , the larvae needed longer time to pupate, but there was no difference in the pupal weight between OBP31-/- and wild type (WT). OBP31-/- larvae showed stronger phototaxis than the WT larvae, indicating the importance of OBP31 in light perception. For mating rhythm of adults, OBP31-/- moths displayed an earlier second mating peak. In the cross-pairing of OBP31-/- and WT moths, the mating duration was longer, and hatchability was lower in OBP31-/- group and OBP31+/- ♂ group than that in the WT group. These results suggested that OBP31 played a vital role in larval light perception and male reproductive process and could provide valuable insights into understanding the biological functions of OBPs that were not specific in chemosensory tissues.

Insecticidal activity of the spider neurotoxin PPTX-04 through modulating insect voltage-gated sodium channel.

Ion channels on cell membrane are molecular targets of more than half peptide neurotoxins from spiders. From Pardosa pseudoannulata, a predatory spider on a range of insect pests, we characterized a peptide neurotoxin PPTX-04 with an insecticidal activity. PPTX-04 showed high toxicity to Nilaparvata lugens, a main prey of P. pseudoannulata, and the toxicity was not affected by the resistance to etofenprox (IUPAC chemical name:1-ethoxy-4-[2-methyl-1-[(3-phenoxyphenyl)methoxy]propan-2-yl]benzene, purity: 99%). On N. lugens voltage-gated sodium channel NlNav1 expressed in Xenopus oocytes, PPTX-04 prolonged the channel opening and induced tail currents, which is similar to pyrethroid insecticides. However, PPTX-04 potency on NlNav1 was not affected by mutations conferring pyrethroid resistance in insects, which revealed that PPTX-04 and pyrethroids should act on different receptors in NlNav1. In contrast, two mutations at the extracellular site 4 significantly reduced PPTX-04 potency, which indicated that PPTX-04 would act on a potential receptor containing the site 4 in NlNav1. The result from the molecular docking supported the conclusion that the binding pocket of PPTX-04 in NlNav1 should contain the site 4. In summary, PPTX-04 had high insecticidal activity through acting on a distinct receptor site in insect Nav, and was a potential resource to control insect pests and manage resistance to pyrethroids.

Pattern Recognition Analysis of Metabolites in Escherichia coli Based on ESI-Orbitrap Mass Spectrometry.

To achieve rapid detection of carbapenem-resistant Escherichia coli strains, a pattern recognition method based on electrospray ionization Orbitrap mass spectrometry (ESI-Orbitrap MS) was used for the analysis of drug-resistant, and sensitive strains of metabolites were analyzed. Results of five clustering methods applied to analytical data of metabolites were evaluated using iso-phenotypic coefficients. The effectiveness of three methods, principal component analysis (PCA), partial least squares discriminant analysis (PLS-DA) and orthogonal partial least squares discriminant analysis (OPLS-DA), was compared. Univariate statistics such as t-test and fold change were also used to examine the screened differential information. Both PLS-DA and OPLS-DA could achieve rapid identification of strain classes, and OPLS-DA was more powerful in screening 96 significantly different ions. This work is expected to be useful for rapid and accurate identification of strains.

Regulation of juvenile hormone and ecdysteroid analogues on the development of the predatory spider, Pardosa pseudoannulata, and its regulatory mechanisms.

Insecticides harm the beneficial organisms, such as predatory spiders, through direct killing or regulation of the development and reproduction. In this study, the bioassay showed that the treatment of juvenile hormone (JH) analogue fenoxycarb delayed the moulting of Pardosa pseudoannulata, a dominant predatory spider in paddy fields. In order to figure out the regulatory mechanism of fenoxycarb on the spider development, we systematically analyzed JH biosynthesis in P. pseudoannulata. All genes involved in JH biosynthesis pathway were retrieved from the genome of P. pseudoannulata, except for CYP15A1. The absence of CYP15A1 was in agreement with the identification of methyl farnesoate (MF) rather than JH III in the spider. The delayed moulting and decreased expression of JH biosynthesis-related genes in the MF-applied spiderlings supported that MF was an active JH. Fenoxycarb treatment significantly upregulated the transcriptional level of JH biosynthesis-related genes and consequently delayed the spiderling moulting. In the spider development, ecdysteroid played the opposite role, in contrast to MF, to accelerate the development, as our previous study. Here we found that the treatment of ecdysteroid analogue tebufenozide accelerated P. pseudoannulata spiderling moulting, which resulted from the expressional suppression of ecdysteroid biosynthesis-related genes. In total, the JH and ecdysteroid analogues affected the development of P. pseudoannulata by the expressional regulation of biosynthesis-related genes, which would be helpful for the evaluation of hormone analogue insecticides in environmental safety, and useful for the protection and application of P. pseudoannulate and related spider species.

Rapid Identification of Polypeptide from Carbapenem-Resistant and Susceptible Escherichia coli via Orbitrap-MS and Pattern Recognition Analyses.

A rapid and accurate analytical method was established to identify CREC and CSEC. Orbitrap-MS was used to detect the polypeptide of CREC and CSEC strains, and MS data were analyzed by pattern recognition analyses such as hierarchical cluster analysis (HCA), principal component analysis (PCA), partial least squares discriminant analysis (PLS-DA), and orthogonal partial least squares discriminant analysis (OPLS-DA). HCA based on the farthest distance method could well distinguish the two types of E. coli, and the cophenetic correlation coefficient of the farthest distance method was 0.901. Comparing the results of PCA, PLS-DA, and OPLS-DA, OPLS-DA exhibited the highest accuracy in predicting the CREC and CSEC strains. A total of 26 compounds were identified, and six of the compounds were the highly significant difference between the two types of strains. MS combined with pattern recognition can achieve a more comprehensive and efficient statistical analysis of complex biological samples.

The regeneration of Acer rubrum L. "October Glory" through embryonic callus.

BACKGROUND: Tissue culture and rapid propagation technology is an important way to solve the difficulties of plant propagation. This experiment aims to explore the appropriate conditions at each stage of the red maple's tissue culture process and to obtain plantlets, thus providing a theoretical basis for the establishment of the red maple's tissue culture system. RESULTS: The results showed that the stem segment is the most suitable explant for inducing embryogenic callus. The MS (Murashige&Skoog) + 0.8 mg/L TDZ (Thidiazuron) + 1.0 mg/L 6-BA (6-Benzylaminopurine) + 0.5 mg/L IAA(Indole-3-acetic acid) + 35 g/L sucrose+ 7.5 g/L semi-fixed medium was the best for callus formation. When selecting type VI callus as embryonic callus induction material, MS + 0.6 mg/L TDZ + 0.5 mg/L 6-BA + 2.0 mg/L IAA + 35 g/L sucrose+ 7.5 g/L semi-fixed medium can get embryonic callus. The optimal medium for adventitious bud induction is MS + 1.0 mg/L TDZ + 3.0 mg/L 6-BA+ 0.2 mg/L NAA (1-Naphthaleneacetic acid) + 1.2 mg/L IAA + 35 g/L sucrose+ 7.5 g/L semi-fixed medium. The induction rate of adventitious roots in MS + 0.6 mg/L TDZ + 1.0 mg/L 6-BA+ 3 mg/L NAA + 35 g/L sucrose+ 7.5 g/L semi-fixed medium was the highest, reaching 76%. CONCLUSIONS: In the course of our research, we found that PGRs play an important role in the callus induction stage, and the effect of TDZ is particularly obvious; The callus cells grow and proliferate according to the "S" growth curve, and can be sub-cultured when the highest growth point is reached to maintain the rapid proliferation of the callus cells and to avoid inactivation of callus caused by tight niche.

MicroRNA6443-mediated regulation of FERULATE 5-HYDROXYLASE gene alters lignin composition and enhances saccharification in Populus tomentosa.

Ferulate 5-hydroxylase (F5H) is a limiting enzyme involved in biosynthesizing sinapyl (S) monolignol in angiosperms. Genetic regulation of F5H can influence S monolignol synthesis and therefore improve saccharification efficiency and biofuel production. To date, little is known about whether F5H is post-transcriptionally regulated by endogenous microRNAs (miRNAs) in woody plants. Here, we report that a microRNA, miR6443, specifically regulates S lignin biosynthesis during stem development in Populus tomentosa. In situ hybridization showed that miR6443 is preferentially expressed in vascular tissues. We further identified that F5H2 is the direct target of miR6443. Overexpression of miR6443 decreased the transcript level of F5H2 in transgenic plants, resulting in a significant reduction in S lignin content. Conversely, reduced miR6443 expression by short tandem target mimics (STTM) elevated F5H2 transcripts, therefore increasing S lignin composition. Introduction of a miR6443-resistant form of F5H2 into miR6443-overexpression plants restored lignin ectopic composition, supporting that miR6443 specifically regulated S lignin biosynthesis by repressing F5H2 in P. tomentosa. Furthermore, saccharification assays revealed decreased hexose yields by 7.5-24.5% in miR6443-overexpression plants compared with the wild-type control, and increased hexoses yields by 13.2-14.6% in STTM6443-overexpression plants. Collectively, we demonstrate that miR6443 modulates S lignin biosynthesis by specially regulating F5H2 in P. tomentosa.

Multi-Stimuli-Triggered Shape Transformation of Polymeric Filaments Derived from Dynamic Covalent Block Copolymers.

Using dynamic polymers to achieve the morphology transformation of polymeric assemblies under different conditions is challenging. Herein, we reported diversiform shape transformation of multi-responsive polymer filaments, which were self-assembled by a new kind of amphiphilic block copolymer (PVEG-PVEA) possessing dynamic and reversible acylhydrazone bonds through reacting benzaldehyde-containing block copolymers poly(vinylbenzaldehyde)-b-poly(N-(4-vinylbenzyl)-N,N-diethylamine) (PVBA-PVEA) with acylhydrazine-modified oligoethylene glycol. It was found that the resulting amphiphilic and dynamic PVEG-PVEA was capable of hierarchically self-assembling into intriguing core-branched filaments in aqueous solution. Notably, the features of acylhydrazone bonds and PVEA block endow the filaments with multi-responsiveness including acid, base, and temperature, leading to the multiple morphological transformations under such stimuli. Moreover, the core-branched filaments would further transform into polymeric braided bundles driven by hydrogen-bonding interactions of amide bonds. It is noteworthy that both core-branched filaments and braided bundles made from polymers are quite rare. These diversiform polymeric assemblies and their morphological evolution were characterized by TEM, Cryo-TEM, SEM, and DLS. Finally, we used PVBA-PVEA as a platform to facilely prepare functional polymers, such as glycopolymers via the reaction of amino-containing sugars and aldehyde groups. The obtained glycopolymers self-assembled into glycofibers for the biomimicry of glycans via binding with lectins. These findings not only are conducive to understanding of the stimulated shape change process of dynamic polymeric assemblies in water but also provide a new method for the facile fabrication of smart and functional polymeric assemblies for different potential applications, such as biomimicry and targeted drug nanocarriers or delivery vehicles.

Modulating Morphologies and Surface Properties of Nanoparticles from Cellulose-Grafted Bottlebrush Copolymers Using Complementary Hydrogen-Bonding between Nucleobases.

Herein we report the synthesis of a cellulose-grafted bottlebrush copolymer with nucleobases as hydrophobic moieties. Well-defined spherical micelles from this bottlebrush copolymer were fabricated via a solvent switch method. A morphological transition from spheres to worms was only observed to occur when a diblock copolymer with a complementary nucleobase functionality was introduced. Hydrophobic interaction is not capable of triggering the morphological transformation, and the diblock copolymer with the heterogeneous acrylamide nucleobase monomer can induce the morphological transition at higher A:T molar ratios, which might be caused by the weak H-bonding interaction. This supramolecular "grafting to" method enables the preparation of a series of nanoparticles with similar shapes and dimensions but distinct surface properties such as zeta potentials. Moreover, reversible morphological transitions between worm-like micelles and spheres can be achieved using a reversible collapsing and swelling of a thermoresponsive polymer. This work highlights that a supramolecular "grafting to" approach between complementary nucleobases can be utilized to tune morphologies and surface properties of nanoparticles.

[Analysis of traditional Chinese medicine syndromes in 159 German migraine patients].

Data mining method was adopted to collect 159 cases of German migraine patients who live in the TCM-Klinik Bad Kötzting Hospital from January 2013 to March 2015. The general case information was divided into age, gender, profession, characteristics of headache, degree of headache, accompanied symptoms and tongue pulse, and included in corresponding databases. Initial data was standardized and cleaned to get a data form suitable for analysis. SPSS system software was adopted to make a frequency statistics analysis for such variables as gender, age, profession, headache characteristic and accompanied symptoms. The results showed that German migraine cases feature a universality of age, long disease cycle and easy recurrence; And most of the patients were mental workers. There were two common clinical TCM symptoms, namely hyperactivity of liver Yang type and Qi deficiency & phlegm dampness. The common symptoms are forehead tingling, recurrent headache, vomiting and nausea, dark tongue, thin and white fur tongue, wiry pulse and slippery pulse. The disease is related to the pathology of stagnation of Qi, phlegm and blood stasis in liver, spleen, kidney and stomach.

Cryo-EM structures of Kv1.2 potassium channels, conducting and non-conducting.

We present near-atomic-resolution cryo-EM structures of the mammalian voltage-gated potassium channel Kv1.2 in open, C-type inactivated, toxin-blocked and sodium-bound states at 3.2 Å, 2.5 Å, 3.2 Å, and 2.9Å. These structures, all obtained at nominally zero membrane potential in detergent micelles, reveal distinct ion-occupancy patterns in the selectivity filter. The first two structures are very similar to those reported in the related Shaker channel and the much-studied Kv1.2-2.1 chimeric channel. On the other hand, two new structures show unexpected patterns of ion occupancy. First, the toxin α-Dendrotoxin, like Charybdotoxin, is seen to attach to the negatively-charged channel outer mouth, and a lysine residue penetrates into the selectivity filter, with the terminal amine coordinated by carbonyls, partially disrupting the outermost ion-binding site. In the remainder of the filter two densities of bound ions are observed, rather than three as observed with other toxin-blocked Kv channels. Second, a structure of Kv1.2 in Na+ solution does not show collapse or destabilization of the selectivity filter, but instead shows an intact selectivity filter with ion density in each binding site. We also attempted to image the C-type inactivated Kv1.2 W366F channel in Na+ solution, but the protein conformation was seen to be highly variable and only a low-resolution structure could be obtained. These findings present new insights into the stability of the selectivity filter and the mechanism of toxin block of this intensively studied, voltage-gated potassium channel.

Research progress of flexible pressure sensor based on MXene materials.

Flexible pressure sensors overcome the limitations of traditional rigid sensors on the surface of the measured object, demonstrating broad application prospects in fields such as sports health and vital sign monitoring due to their excellent flexibility and comfort in contact with the body. MXene, as a two-dimensional material, possesses excellent conductivity and abundant surface functional groups. Simultaneously, MXene's unique layered structure and large specific surface area offer a wealth of possibilities for preparing sensing elements in combination with other materials. This article reviews the preparation methods of MXene materials and their performance indicators as sensing elements, discusses the controllable preparation methods of MXene materials and the impact of their physical and chemical properties on their functions, elaborates on the pressure sensing mechanism and evaluation mechanism of MXene materials. Starting from the four specific application directions: aerogel/hydrogel, ink printing, thin film/electronic skin, and fiber fabric, we introduce the research progress of MXene flexible pressure sensors from an overall perspective. Finally, a summary and outlook for developing MXene flexible pressure sensors are provided.

Cys-loop ligand-gated ion channel superfamily of Pardosa pseudoannulata: Implication for natural enemy safety.

Cys-loop ligand-gated channels mediate neurotransmission in insects and are receptors for many insecticides. Some insecticides acting on cysLGIC also have lethal effects on non-targeting organisms, but the mechanism of this negative effect is unclear due to information absence. The identification and analysis of cysLGIC family in Pardosa pseudoannulata, a pond wolf spider, can deepen the understanding of insecticides for natural enemy safety. Thirty-four cysLGIC genes were identified in P. pseudoannulata genome, including nicotinic acetylcholine receptors, γ-aminobutyric acid gated chloride channels, glutamate-gated chloride channels, histamine-gated chloride channels, and pH-sensitive chloride channels. The expansion of GABACls and HisCls accounts for the large number of cysLGICs in P. pseudoannulata, and the alternative splicing events in nAChR and RDL subunits enriched the diversity of the superfamily. Most cysLGIC genes show the highest expression in brain and lowest expression in the early-egg sac stage. Variable residues (R81, V83, R135, N137, F190, and W197) in P. pseudoannulata nAChR ß subunits and critical differences in α6 subunit TM4 region compared with insects would apply for the insensitivity to neonicotinoids and spinosyn. In contrast, avermectin and dieldrin may be lethal to P. pseudoannulata due to the similar drugs binding sites in GluCls compared with insects. These findings will provide a valuable clue for natural enemy protection and environmentally friendly insecticide development.

An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layers.

Silicon interposers embedded with ultra-deep through-silicon vias (TSVs) are in great demand for the heterogeneous integration and packaging of opto-electronic chiplets and microelectromechanical systems (MEMS) devices. Considering the cost-effective and reliable manufacturing of ultra-deep TSVs, the formation of continuous barrier and seed layers remains a crucial challenge to solve. Herein, we present a novel dual catalysis-based electroless plating (ELP) technique by tailoring polyimide (PI) liner surfaces to fabricate dense combined Ni barrier/seed layers in ultra-deep TSVs. In additional to the conventional acid catalysis procedure, a prior catalytic step in an alkaline environment is proposed to hydrolyze the PI surface into a polyamide acid (PAA) interfacial layer, resulting in additional catalysts and the formation of a dense Ni layer that can function as both a barrier layer and a seed layer, particularly at the bottom of the deep TSV. TSVs with depths larger than 500 µm and no voids are successfully fabricated in this study. The fabrication process involves low costs and temperatures. For a fabricated 530-µm-deep TSV with a diameter of 70 µm, the measured depletion capacitance and leakage current are approximately 1.3 pF and 1.7 pA at 20 V, respectively, indicating good electrical properties. The proposed fabrication strategy can provide a cost-effective and feasible solution to the challenge of manufacturing ultra-deep TSVs for modern 3D heterogeneous integration and packaging applications.

Heterogeneous Cu2O-SnO2 doped polydopamine fenton-like nanoenzymes for synergetic photothermal-chemodynamic antibacterial application.

Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic antibacterial nanoenzymes with high photothermal conversion efficiency and good Fenton-like catalase performance. CSPDA antibacterial nanoplatform can catalyze the generation of hydroxyl radical (·OH) from H2O2 at low concentration (50 µg∙mL-1) under 808 nm near-infrared (NIR) irradiation to achieve a combined photothermal therapy (PTT) and chemodynamic therapy (CDT). And the CSPDA antibacterial nanoplatform displays broad-spectrum and long-lasting antibacterial effects against both Gram-negative Escherichia coli (100 %) and Gram-positive Staphylococcus aureus (100 %) in vitro. Moreover, in a mouse wound model with mixed bacterial infection, the nanoplatform demonstrates a significant in vivo bactericidal effect while remaining good cytocompatible. To conclude, this study successfully develops an efficient and long-lasting bacterial infection treatment system. This system provided different options for future studies on the design of synergistic antimicrobial therapy. Hence, the as-synthesized synergetic photothermal therapy and chemodynamic therapy nanoenzymes have rapid and long-term bactericidal ability, well-conglutinant performance and effectively preventing wound infection for clinical application. STATEMENT OF SIGNIFICANCE: Wound infections caused by drug-resistant bacteria pose a great threat to human health, and the development of non-drug-resistant antibacterial approaches has become a research priority. In this study, we developed Cu2O-SnO2 doped polydopamine (CSPDA) triple cubic yolk-like antibacterial nanoenzymes with high photothermal conversion efficiency and Fenton-like catalase effect for photothermal and Chemodynamic antibacterial therapy, Meanwhile, the nanocomposites exhibit good antibioadhesion in a natural water environment for a long-time immersion. In conclusion, this study successfully develops an efficient and long-lasting bacterial infection treatment system. These findings present a pioneering strategy for future research on the design of synergistic antibacterial and antibioadhesive systems.

Effect of chain-extenders on the properties and hydrolytic degradation behavior of the poly(lactide)/poly(butylene adipate-co-terephthalate) blends.

Biodegradable poly(lactide)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared by reactive blending in the presence of chain-extenders. Two chain-extenders with multi-epoxy groups were studied. The effect of chain-extenders on the morphology, mechanical properties, thermal behavior, and hydrolytic degradation of the blends was investigated. The compatibility between the PLA and PBAT was significantly improved by in situ formation of PLA-co-PBAT copolymers in the presence of the chain-extenders, results in an enhanced ductility of the blends, e.g., the elongation at break was increased to 500% without any decrease in the tensile strength. The differential scanning calorimeter (DSC) results reveal that cold crystallization of PLA was enhanced due to heterogeneous nucleation effect of the in situ compatibilized PBAT domains. As known before, PLA is sensitive to hydrolysis and in the presence of PBAT and the chain-extenders, the hydrolytic degradation of the blend was evident. A three-stage hydrolysis mechanism for the system is proposed based on a study of weight loss and molecular weight reduction of the samples and the pH variation of the degradation medium.

Insecticidal toxicity of ω-Atypitoxin-Cs1a and its inhibitory effects on insect voltage-gated calcium channels.

BACKGROUND: Excessive use of chemical insecticides raises concerns about insecticide resistance, urging the development of novel insecticides. Peptide neurotoxins from spider venom are an incredibly rich source of ion channel modulators with potent insecticidal activity. A neurotoxin U1-Atypitoxin-Cs1a from the spider Calommata signata was annotated previously. It was of interest to investigate its insecticidal activity and potential molecular targets. RESULTS: Cs1a was heterologously expressed, purified and pharmacologically characterized here. The recombinant neurotoxin inhibited high-voltage-activated calcium channel currents with an median inhibitory concentration (IC50 ) value of 0.182 ± 0.026 µm on cockroach DUM neurons and thus was designated as ω-Atypitoxin-Cs1a. The recombinant Cs1a was toxic to three insect pests of agricultural importance, Nilaparvata lugens, Spodoptera frugiperda and Plutella xylostella with median lethal concentration (LD50 ) values of 0.121, 0.172 and 0.356 nmol g-1 , respectively, at 24 h postinjection. Cs1a was equivalently toxic to both insecticide-susceptible and -resistant insects. Cs1a exhibited low toxicity to Danio rerio with an LD50 of 2.316 nmol g-1 . CONCLUSION: Our results suggest that ω-Atypitoxin-Cs1a is a potent CaV channel inhibitor and an attractive candidate reagent for pest control and resistance management. © 2023 Society of Chemical Industry.

EcR/USP-1-mediated ecdysteroid signaling regulates wolf spider (Pardosa pseudoannulata) development and reproduction.

Lycosidae females demonstrate meticulous maternal care of offspring by carrying egg sacs and juvenile spiderlings during the reproductive stage. Nuclear receptors (NRs), especially the ecdysone receptor (EcR) and ultraspiracle (USP), have attracted considerable attention in the regulation of arthropod development and reproduction due to their pivotal roles in ecdysteroid signaling cascades. In the present study, 23 NRs, including one EcR and two USPs, were identified in the genome of the predatory wolf spider Pardosa pseudoannulata. RNA interference (RNAi) targeting EcR and USP-1 inhibited spiderling development and resulted in non-viable eggs in the egg sacs. EcR and USP-1 responded to changes in ecdysteroid levels, and interference in ecdysteroid biosynthesis led to similar phenotypes as dsEcR and dsUSP-1 treatments. These findings suggest that EcR/USP-1-mediated ecdysteroid signaling regulates P. pseudoannulata development and reproduction. The P. pseudoannulata females with suppressed ecdysteroid signaling proactively consumed their non-viable egg sacs, resulting in a 7.19 d shorter first reproductive cycle than the controls. Termination of the failed reproductive cycle enabled the spiders to produce a new egg sac more rapidly. This reproductive strategy may partially rescue the reduction in population growth due to non-viable eggs and compensate for the physiological expenditure of wasted maternal care, which would be beneficial for the conservation of P. pseudoannulata populations and their natural control of insect pests.

Plasticity of the Gene Transcriptional Level and Microbiota in the Gut Contributes to the Adaptability of the Fall Armyworm to Rice Plants.

Insects coordinate a variety of mechanisms to overcome the feeding challenges, including gene transcriptional plasticity and stable symbioses in the gut. Here, Spodoptera frugiperda larvae were reared on corn and rice plants for successive generations to obtain two specific strains. The rice strain displayed a longer developmental period, lower female fecundity, and intrinsic growth rate at G1 and G5 but not at G10. KEGG analysis of the G1, G5, and G11 gut transcriptome indicated that detoxification enzymes might play vital roles in host adaptation. RNAi-mediated knockdown of CYP12A2 and UGT41B8, which were highly expressed in the gut of the rice strain, significantly reduced the larval adaptability to rice. Besides, the dsCYP12A2-treated larvae displayed an increased sensitivity to luteolin, a flavonoid phytochemical. The KEGG function prediction of gut microbiota indicated that the high enrichment level of metabolism in the rice strain would play essential roles in rice adaptation.

A robust lateral shift free (LSF) electrothermal micromirror with flexible multimorph beams.

Electrothermal bimorph-based scanning micromirrors typically employ standard silicon dioxide (SiO2) as the electrothermal isolation material. However, due to the brittle nature of SiO2, such micromirrors may be incapable to survive even slight collisions, which greatly limits their application range. To improve the robustness of electrothermal micromirrors, a polymer material is incorporated and partially replaces SiO2 as the electrothermal isolation and anchor material. In particular, photosensitive polyimide (PSPI) is used, which also simplifies the fabrication process. Here, PSPI-based electrothermal micromirrors have been designed, fabricated, and tested. The PSPI-type micromirrors achieved an optical scan angle of ±19.6° and a vertical displacement of 370 µm at only 4 Vdc. With a mirror aperture size of 1 mm × 1 mm, the PSPI-type micromirrors survived over 200 g accelerations from either vertical or lateral directions in impact experiments. In the drop test, the PSPI-type micromirrors survived falls to a hard floor from heights up to 21 cm. In the standard frequency sweeping vibration test, the PSPI-type micromirrors survived 21 g and 29 g acceleration in the vertical and lateral vibrations, respectively. In all these tests, the PSPI-type micromirrors demonstrated at least 4 times better robustness than SiO2-type micromirrors fabricated in the same batch.