Rational H2 Partial Pressure over Nickel/Ceria Crystal Enables Efficient and Durable Wide-Temperature-Zone Air-Level CO2 Methanation.

On the way to carbon neutrality, directly catalyzing atmospheric CO2 into high-value chemicals might be an effective approach to mitigate the negative impacts of rising airborne CO2 concentrations. Here, we pioneer the investigation of the influence of the H2/CO2 partial pressure ratio (PPR) on air-level CO2 methanation. Using Ni/CeO2 as a case catalyst, increasing H2/CO2 PPR significantly improves low-temperature CO2 conversion and high-temperature CH4 selectivity, i. e., from 10 of H2/CO2 PPR on, CO2 is completely methanized at 250 °C, and nearly 100 % CH4 selectivity is achieved at 400 °C. 100-hour stability tests demonstrate the practical application potential of Ni/CeO2 at 250 °C and 400 °C. In-situ DRIFTS reveal that reinforced formate pathway by increasing H2/CO2 PPR is responsible for the high CH4 yield. In contrast, even though the CO pathway dominated CO2 conversion on Ni is enhanced by rising H2/CO2 PPR, but at a high reaction temperature, the promoted CO desorption still leads to lower CH4 selectivity. This work offers deep insights into the direct air-level CO2 resourceization, contributing to the achievement of airborne CO2 reductions.

In Situ Fourier Transform Infrared Investigation on the Low-Level Carbon Dioxide Conversion over a Nickel/Titanium Dioxide Catalyst.

Efficiently converting atmospheric carbon dioxide (CO2) is crucial for sustainable human development. In this study, we conducted systematic in situ Fourier transform infrared tests to examine how hydrogen (H2) partial pressure affects the conversion of low-level CO2 (around 400 ppm) using nickel/titanium dioxide (Ni/TiO2). Results show that increasing H2 partial pressure significantly increases surface monodentate formate species, leading to enhanced methane (CH4) production at both 250 and 400 °C. Conversely, on Ni's surface, the key species are formyls and bidentate formate at 250 °C, but these decrease significantly at 400 °C. These findings indicate that low-level CO2 is more easily converted to CH4 over Ni/TiO2 than Ni, regardless of temperature. Additionally, the strong Ni-TiO2 interaction gives Ni/TiO2 an advantage in converting low CO2 concentrations, with excellent durability even at 400 °C. This study enhances our understanding of direct CO2 conversion and aids in the development of advanced CO2 emission reduction technologies.

Microfluidic design in single-cell sequencing and application to cancer precision medicine.

Single-cell sequencing (SCS) is a crucial tool to reveal the genetic and functional heterogeneity of tumors, providing unique insights into the clonal evolution, microenvironment, drug resistance, and metastatic progression of cancers. Microfluidics is a critical component of many SCS technologies and workflows, conferring advantages in throughput, economy, and automation. Here, we review the current landscape of microfluidic architectures and sequencing techniques for single-cell omics analysis and highlight how these have enabled recent applications in oncology research. We also discuss the challenges and the promise of microfluidics-based single-cell analysis in the future of precision oncology.

Primary or secondary tasks? Dual-task interference between cyclist hazard perception and cadence control using cross-modal sensory aids with rider assistance bike computers.

This research investigated the risks involved in bicycle riding while using various sensory modalities to deliver training information. To understand the risks associated with using bike computers, this study evaluated hazard perception performance through lab-based simulations of authentic riding conditions. Analysing hazard sensitivity (d') of signal detection theory, the rider's response time, and eye glances provided insights into the risks of using bike computers. In this study, 30 participants were tested with eight hazard perception tasks while they maintained a cadence of 60 ± 5 RPM and used bike computers with different sensory displays, namely visual, auditory, and tactile feedback signals. The results indicated that synchronously using different sense organs to receive cadence feedback significantly affects hazard perception performance; direct visual information leads to the worst rider distraction, with a mean sensitivity to hazards (d') of -1.03. For systems with multiple interacting sensory aids, auditory aids were found to result in the greatest reduction in sensitivity to hazards (d' mean = -0.57), whereas tactile sensory aids reduced the degree of rider distraction (d' mean = -0.23). Our work complements existing work in this domain by advancing the understanding of how to design devices that deliver information subtly, thereby preventing disruption of a rider's perception of road hazards.

S-1 plus cisplatin with concurrent radiotherapy versus cisplatin alone with concurrent radiotherapy for stage III non-small cell lung cancer: a pilot randomized controlled trial.

BACKGROUND: We investigated the efficacy and safety of S-1 and cisplatin with concurrent thoracic radiation (SCCR) over cisplatin alone plus concurrent thoracic radiation (CCR) for unresectable stage III non-small-cell lung cancer (NSCLC). METHODS: Between January 2009 and November 2011, 40 eligible patients with NSCLC were included and divided randomly into two groups. Twenty patients received SCCR with S-1 (orally at 40 mg/m(2) per dose, b.i.d.) on days 1 through 14, cisplatin (60 mg/m(2) on day 1) every 4 weeks for two cycles, and radiotherapy (60 Gy/30 fractions over 6 weeks) beginning on day 1. Twenty subjects received CCR (cisplatin and radiotherapy, the same as for SCCR). RESULTS: The 3-year overall response rate was 59.3% and 52.4% for the SCCR and CCR groups, respectively, and the difference was statistically significant, while the median overall survival was 33 months (range, 4-41 months) and 24 months (range, 2-37 months), respectively (P = 0.048). The median progression-free survival was 31 months for SCCR (range, 5-39 months), whereas it was 20 months (range, 2-37 months) for CCR (P = 0.037). The toxicity profile was similar in both groups. CONCLUSION: In summary, we demonstrated that S-1 and cisplatin with concurrent thoracic radiation was more effective than cisplatin plus radiotherapy in NSCLC patients with acceptable toxicity. TRIAL REGISTRATION: Chinese Clinical Trials Register: ChiCTR-TRC-13003997 .

Surface anthropometric indices in obesity-related metabolic diseases and cancers.

Metabolic syndrome (MetS), cardiovascular diseases (CVD) and cancers such as colon cancer (CCa), prostate cancer (PCa) and breast cancer (BCa) have been recognized as obesity-initiated diseases. The development of obesity can cause changes in metabolic and hormonal conditions, which can result in the storage of excess energy in different forms in the human body. Existing anthropometric data are useful in the prognosis of these diseases. Although frequently studied, there is disagreement on the applicability, reliability and trends of weight, height, waist circumference (WC) and relevant indices. WC is generally accepted as a key marker in CVD and CCa risk assessment whereas more evidence of the usefulness of WC-CVD, WC-PCa and WC-BCa correlations is needed. The body mass index, which has been widely used as a determinant of obesity, has a strong connection with CCa risk in men and young women, but an inconsistent connection with BCa. Cross-referencing measurements, with indices such as the waist-to-height ratio (WHtR) and waist-to-hip ratio (WHR), enhances the association with diseases, e.g. WHtR-CVD and WHR-CCa, and connections are strong. This idea is further applied to multiple referencing. For example, the WHtR/WHR has been studied and found highly correlated with the MetS risk in Asia. In addition, latent issues (such as tools or techniques for surface anthropometric measurement), which could affect the prognosis of diseases, have been discussed. To this end, three-dimensional technology is suggested as a reliable tool for various anthropometric data collection and analysis in preventive medicine.