RESUMO
BACKGROUND: Widespread outbreaks of person-to-person transmitted hepatitis A virus (HAV), particularly among people who inject drugs (PWID), continue across the United States and globally. However, the herd immunity threshold and vaccination coverage required to prevent outbreaks are unknown. We used surveillance data and dynamic modeling to estimate herd immunity thresholds among PWID in 16â US states. METHODS: We used a previously published dynamic model of HAV transmission calibrated to surveillance data from outbreaks involving PWID in 16 states. Using state-level calibrated models, we estimated the basic reproduction number (R0) and herd immunity threshold for PWID in each state. We performed a meta-analysis of herd immunity thresholds to determine the critical vaccination coverage required to prevent most HAV outbreaks among PWID. RESULTS: Estimates of R0 for HAV infection ranged from 2.2 (95% confidence interval [CI], 1.9-2.5) for North Carolina to 5.0 (95% CI, 4.5-5.6) for West Virginia. Corresponding herd immunity thresholds ranged from 55% (95% CI, 47%-61%) for North Carolina to 80% (95% CI, 78%-82%) for West Virginia. Based on the meta-analysis, we estimated a pooled herd immunity threshold of 64% (95% CI, 61%-68%; 90% prediction interval, 52%-76%) among PWID. Using the prediction interval upper bound (76%) and assuming 95% vaccine efficacy, we estimated that vaccination coverage of 80% could prevent most HAV outbreaks. CONCLUSIONS: Hepatitis A vaccination programs in the United States may need to achieve vaccination coverage of at least 80% among PWID in order to prevent most HAV outbreaks among this population.
Assuntos
Usuários de Drogas , Vírus da Hepatite A , Abuso de Substâncias por Via Intravenosa , Humanos , Estados Unidos/epidemiologia , Imunidade Coletiva , Abuso de Substâncias por Via Intravenosa/complicações , Abuso de Substâncias por Via Intravenosa/epidemiologia , VacinaçãoRESUMO
The soft part of the Earth's surface - the ground beneath our feet - constitutes the basis for life and natural resources, yet a general physical understanding of the ground is still lacking. In this critical time of climate change, cross-pollination of scientific approaches is urgently needed to better understand the behavior of our planet's surface. The major topics in current research in this area cross different disciplines, spanning geosciences, and various aspects of engineering, material sciences, physics, chemistry, and biology. Among these, soft matter physics has emerged as a fundamental nexus connecting and underpinning many research questions. This perspective article is a multi-voice effort to bring together different views and approaches, questions and insights, from researchers that work in this emerging area, the soft matter physics of the ground beneath our feet. In particular, we identify four major challenges concerned with the dynamics in and of the ground: (I) modeling from the grain scale, (II) near-criticality, (III) bridging scales, and (IV) life. For each challenge, we present a selection of topics by individual authors, providing specific context, recent advances, and open questions. Through this, we seek to provide an overview of the opportunities for the broad Soft Matter community to contribute to the fundamental understanding of the physics of the ground, strive towards a common language, and encourage new collaborations across the broad spectrum of scientists interested in the matter of the Earth's surface.
RESUMO
The spread of pathogenic bacteria in unsaturated porous media, where air and liquid coexist in pore spaces, is the major cause of soil contamination by pathogens, soft rot in plants, food spoilage, and many pulmonary diseases. However, visualization and fundamental understanding of bacterial transport in unsaturated porous media are currently lacking, limiting the ability to address the above contamination- and disease-related issues. Here, we demonstrate a previously unreported mechanism by which bacterial cells are transported in unsaturated porous media. We discover that surfactant-producing bacteria can generate flows along corners through surfactant production that changes the wettability of the solid surface. The corner flow velocity is on the order of several millimeters per hour, which is the same order of magnitude as bacterial swarming, one of the fastest known modes of bacterial surface translocation. We successfully predict the critical corner angle for bacterial corner flow to occur based on the biosurfactant-induced change in the contact angle of the bacterial solution on the solid surface. Furthermore, we demonstrate that bacteria can indeed spread by producing biosurfactants in a model soil, which consists of packed angular grains. In addition, we demonstrate that bacterial corner flow is controlled by quorum sensing, the cell-cell communication process that regulates biosurfactant production. Understanding this previously unappreciated bacterial transport mechanism will enable more accurate predictions of bacterial spreading in soil and other unsaturated porous media.
Assuntos
Bactérias/metabolismo , Fenômenos Fisiológicos Bacterianos/efeitos dos fármacos , Tensoativos/química , Meios de Cultura , Poluição Ambiental , Porosidade , Percepção de Quorum/fisiologia , Solo , Microbiologia do Solo , Água , MolhabilidadeRESUMO
Biofilms can increase pathogenic contamination of drinking water, cause biofilm-related diseases, alter the sediment erosion rate, and degrade contaminants in wastewater. Compared with mature biofilms, biofilms in the early-stage have been shown to be more susceptible to antimicrobials and easier to remove. Mechanistic understanding of physical factors controlling early-stage biofilm growth is critical to predict and control biofilm development, yet such understanding is currently incomplete. Here, we reveal the impacts of hydrodynamic conditions and microscale surface roughness on the development of early-stage Pseudomonas putida biofilm through a combination of microfluidic experiments, numerical simulations, and fluid mechanics theories. We demonstrate that early-stage biofilm growth is suppressed under high flow conditions and that the local velocity for early-stage P. putida biofilms (growth time < 14 h) to develop is about 50 µm/s, which is similar to P. putida's swimming speed. We further illustrate that microscale surface roughness promotes the growth of early-stage biofilms by increasing the area of the low-flow region. Furthermore, we show that the critical average shear stress, above which early-stage biofilms cease to form, is 0.9 Pa for rough surfaces, three times as large as the value for flat or smooth surfaces (0.3 Pa). The important control of flow conditions and microscale surface roughness on early-stage biofilm development, characterized in this study, will facilitate future predictions and managements of early-stage P. putida biofilm development on the surfaces of drinking water pipelines, bioreactors, and sediments in aquatic environments.
Assuntos
Água Potável , Pseudomonas putida , Hidrodinâmica , Biofilmes , Reatores BiológicosRESUMO
BACKGROUND: Endotracheal tubes (ETTs) are commonly secured with tape to prevent undesirable tube migration. Many methods of taping have been described, although little has been published comparing various methods of taping to one another. In this study, we evaluated several methods for securing ETTs with tape. We hypothesized a difference in mean peak forces between the methods studied during forced extubation. METHODS: Five methods of securing an ETT with tape were studied in a variety of contexts including cadaver and simulation lab settings. Testing included measurement of peak force (Newton [N]) during forced extubation, durability of taping following mechanical stress, effects of tape length-width variation, and characterization of failure mechanisms. RESULTS: We found several significant differences in mean peak extubation forces between the 5 methods of taping, with mean peak forces during forced extubation ranging from 20 N to 156 N. In separate tests, we found an association between mean peak forces and total surface area as well as geometric configuration of tape on the face. Long thin strips of tape appeared to provide surprising durability against forced extubation, a phenomenon that was associated with minimization of the "peel angle" as tape was removed. CONCLUSIONS: We found evidence of differential structural integrity between the 5 taping methods studied. More generally, we found that increased peak extubation forces were associated with increased total surface area of tape and that minimization of the "peel angle" by lateral application of tape is associated with surprisingly high relative peak extubation forces.
Assuntos
Extubação/métodos , Intubação Intratraqueal/métodos , Manequins , Fita Cirúrgica , Idoso de 80 Anos ou mais , Extubação/instrumentação , Cadáver , Feminino , Humanos , Intubação Intratraqueal/instrumentaçãoRESUMO
BACKGROUND: Preoperative erythropoietin alpha (EPO) has been shown to be effective at reducing postoperative blood transfusions in total hip arthroplasty (THA) and total knee arthroplasty (TKA); however, treatment with EPO is associated with additional costs, and it is not known whether these costs can be justified when weighed against the transfusion reductions achieved in patients who receive the drug. QUESTIONS/PURPOSES: The purpose of this study is to investigate (1) efficacy of preoperative EPO in reducing postoperative transfusions in TKA and THA; (2) whether patients treated with EPO have reduced length of stay or a different discharge disposition; and (3) whether EPO use reduces overall blood management costs. METHODS: Patients undergoing primary THA or TKA over a 10-month period with preoperative hemoglobin<13 g/dL were recommended to be treated preoperatively with EPO. During that time, 80 of 286 (28%) patients met that inclusion criterion and the treating team recommended EPO to all of them; of that group, 24 (30%) opted to take EPO and 56 (70%) opted not to. Patients receiving at least one dose of EPO and those not receiving EPO were compared in terms of transfusion frequency, length of stay and discharge disposition, and overall blood management costs. Demographics, preoperative hemoglobin, and operative blood loss for both groups were similar (p>0.05). No transfusion triggers were used; rather, patients with postoperative hemoglobin<10 mg/dL and who were symptomatic despite fluid boluses were transfused. The clinician responsible for transfusing symptomatic patients was blinded to the patient's EPO treatment status. Costs were defined as direct costs paid or incurred by our institution for EPO, allogeneic blood, and variable costs associated with patient care after THA/TKA. A decision-tree cost analysis was performed using the collected clinical data and cost data collected from our institution; the analysis considered total associated blood management cost for an EPO and a non-EPO strategy with sensitivity analysis of key cost variables. RESULTS: The proportion of patients receiving transfusions was lower in patients who received EPO than in patients who did not (0% [zero of 24] versus 41% [23 of 56]; p<0.001). The mean length of inpatient hospital stay (EPO: 3.0±0.4 versus control: 3.3±0.8 days, p=0.77) and discharge disposition also was not different between the groups. The cost analysis demonstrated that the EPO strategy was more costly compared with no EPO (USD 2632 versus USD 2284) and its cost would need to be less than USD 225/dose for this to change. CONCLUSIONS: EPO reduced the need for postoperative transfusions in high-risk patients undergoing THA and TKA; however, it was not found to be cost-effective in our model. Our model could not consider relatively rare complications of blood transfusions, including disease transmission, deep periprosthetic infections, and transfusion reactions, but if surgeons or patients value avoiding these potential but rare factors highly, this could reasonably influence the decision of whether to use EPO despite our findings that it was not cost-effective. LEVEL OF EVIDENCE: Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.
Assuntos
Transfusão de Sangue/economia , Transfusão de Sangue/estatística & dados numéricos , Eritropoetina/economia , Eritropoetina/uso terapêutico , Idoso , Artroplastia de Quadril , Artroplastia do Joelho , Análise Custo-Benefício , Árvores de Decisões , Feminino , Humanos , Tempo de Internação , Masculino , Pessoa de Meia-Idade , Período Pós-OperatórioRESUMO
In-channel vegetation is ubiquitous in aquatic environments and plays a critical role in the fate and transport of solutes and particles in aquatic ecosystems. Recent studies have advanced our understanding of the role of vegetation in solute flow and particle transport in aquatic ecosystems. This review summarizes these papers and discusses the impacts of emergent and rigid vegetation on the surface flow, the advection and dispersion of solutes, suspended load transport, bedload transport, and hyporheic exchange. The two competing effects of emergent vegetation on the above transport processes are discussed. On the one hand, emergent vegetation reduces mean flow velocity at the same surface slope, which reduces mass transport. On the other hand, at the same mean flow velocity, vegetation generates turbulence, which enhances mass transport. Mechanistic understanding of these two competing effects and predictive equations derived from laboratory experiments are discussed. Predictive equations for the mean flow velocity and turbulent kinetic energy inside an emergent vegetation canopy are derived based on force and energy balance. The impacts of emergent vegetation on the advection-dispersion process, the suspended load and bedload transport, and the hyporheic exchange are summarized. The impacts of other vegetation-related factors, such as vegetation morphology, submergence, and flexibility, are briefly discussed. The role of vegetation in transporting other particles, such as micro- and macro-plastics, is also briefly discussed. Finally, suggestions for future research directions are proposed to advance the understanding of the dynamic interplays among natural vegetation, flow dynamics, and sedimentary processes.
RESUMO
Clay-algae flocculation is a promising method to remove harmful algal blooms (HABs) in aquatic ecosystems. Many HAB-generating species, such as Microcystis aeruginosa (M. aeruginosa), a common species in lakes, produce toxins and harm the environment, human health, and the economy. Natural clays, such as bentonite and kaolinite, and modification of these clays have been applied to mitigate HABs by forming large aggregates and settling down. In this study, we aim to examine the impact of laponite, a commercially available smectite clay that is synthetic, transparent, compatible with human tissues, and degradable, on removing HABs. We compare the cell removal efficiencies (RE) of laponite, two natural clays, and their polyaluminum chloride (PAC)-modified versions through clay-algae flocculation experiments. Our results show that the optimum concentrations of laponite, bentonite, kaolinite, PAC-modified bentonite, and PAC-modified kaolinite to remove 80 % of the M. aeruginosa cells from the water column are 0.05 g/L, 2 g/L, 4 g/L, 2 g/L and 0.3 g/L respectively. Therefore, to achieve the same cell removal efficiency, the amount of laponite needed is 40 to 80 times less than bentonite and kaolinite, and 6 times less than PAC-modified kaolinite. We demonstrate that the superior performance of laponite clay is because of its smaller particle size, which increases the encounter rate between cells and clay particles. Furthermore, experiments using water samples from Powderhorn Lake confirmed laponite's effectiveness in mitigating HABs. Our price analysis also suggests that this commercially-available clay, laponite, can be used in the field at a relatively low cost.
Assuntos
Argila , Floculação , Microcystis , Argila/química , Proliferação Nociva de Algas , Silicatos/química , Silicatos de Alumínio/química , Caulim/química , Bentonita/química , Hidróxido de Alumínio/químicaRESUMO
Biofilms are subjected to many environmental pressures that can influence community structure and physiology. In the oral cavity, and many other environments, biofilms are exposed to forces generated by fluid flow; however, our understanding of how oral biofilms respond to these forces remains limited. In this study, we developed a linear rocker model of fluid flow to study the impact of shear forces on Streptococcus gordonii and dental plaque-derived multispecies biofilms. We observed that as shear forces increased, S. gordonii biofilm biomass decreased. Reduced biomass was largely independent of overall bacterial growth. Transcriptome analysis of S. gordonii biofilms exposed to moderate levels of shear stress uncovered numerous genes with differential expression under shear. We also evaluated an ex vivo plaque biofilm exposed to fluid shear forces. Like S. gordonii, the plaque biofilm displayed decreased biomass as shear forces increased. Examination of plaque community composition revealed decreased diversity and compositional changes in the plaque biofilm exposed to shear. These studies help to elucidate the impact of fluid shear on oral bacteria and may be extended to other bacterial biofilm systems.
RESUMO
Biofilms play critical roles in wastewater treatment, bioremediation, and medical-device-related infections. Understanding the dynamics of biofilm formation and growth is essential for controlling and exploiting their properties. However, the majority of current studies have focused on the impact of steady flows on biofilm growth, while flow fluctuations are common in natural and engineered systems such as water pipes and blood vessels. Here, we reveal the effects of flow fluctuations on the development of Pseudomonas putida biofilms through systematic microfluidic experiments and the development of a theoretical model. Our experimental results showed that biofilm growth under fluctuating flow conditions followed three phases: lag, exponential, and fluctuation phases. In contrast, biofilm growth under steady-flow conditions followed four phases: lag, exponential, stationary, and decline phases. Furthermore, we demonstrated that low-frequency flow fluctuations promoted biofilm growth, while high-frequency fluctuations inhibited its development. We attributed the contradictory impacts of flow fluctuations on biofilm growth to the adjustment time (T0) needed for biofilm to grow after the shear stress changed from high to low. Furthermore, we developed a theoretical model that explains the observed biofilm growth under fluctuating flow conditions. Our insights into the mechanisms underlying biofilm development under fluctuating flows can inform the design of strategies to control biofilm formation in diverse natural and engineered systems.
Assuntos
Microfluídica , Pseudomonas putida , BiofilmesRESUMO
A mechanistic understanding of bacterial spreading in soil, which has both air and water in angular pore spaces, is critical to control pathogenic contamination of soil and to design bioremediation projects. A recent study (J. Q. Yang, J. E. Sanfilippo, N. Abbasi, Z. Gitai, et al., Proc Natl Acad Sci U S A 118:e2111060118, 2021, https://doi.org/10.1073/pnas.2111060118) shows that Pseudomonas aeruginosa can self-generate flows along sharp corners by producing rhamnolipids, a type of biosurfactants that change the hydrophobicity of solid surfaces. We hypothesize that other types of biosurfactants and biosurfactant-producing bacteria can also generate corner flows. Here, we first demonstrate that rhamnolipids and surfactin, biosurfactants with different chemical structures, can generate corner flows. We identify the critical concentrations of these two biosurfactants to generate corner flow. Second, we demonstrate that two common soil bacteria, Pseudomonas fluorescens and Bacillus subtilis (which produce rhamnolipids and surfactin, respectively), can generate corner flows along sharp corners at the speed of several millimeters per hour. We further show that a surfactin-deficient mutant of B. subtilis cannot generate corner flow. Third, we show that, similar to the finding for P. aeruginosa, the critical corner angle for P. fluorescens and B. subtilis to generate corner flows can be predicted from classic corner flow theories. Finally, we show that the height of corner flows is limited by the roundness of corners. Our results suggest that biosurfactant-induced corner flows are prevalent in soil and should be considered in the modeling and prediction of bacterial spreading in soil. The critical biosurfactant concentrations we identify and the mathematical models we propose will provide a theoretical foundation for future predictions of bacterial spreading in soil. IMPORTANCE The spread of bacteria in soil is critical in soil biogeochemical cycles, soil and groundwater contamination, and the efficiency of soil-based bioremediation projects. However, the mechanistic understanding of bacterial spreading in soil remains incomplete due to a lack of direct observations. Here, we simulate confined spaces of hydrocarbon-covered soil using a transparent material with similar hydrophobicity and visualize the spread of two common soil bacteria, Pseudomonas fluorescens and Bacillus subtilis. We show that both bacteria can generate corner flows at the velocity of several millimeters per hour by producing biosurfactants, soap-like chemicals. We provide quantitative equations to predict the critical corner angle for bacterial corner flow and the maximum distance of the corner spreading. We anticipate that bacterial corner flow is prevalent because biosurfactant-producing bacteria and angular pores are common in soil. Our results will help improve predictions of bacterial spreading in soil and facilitate the design of soil-related bioremediation projects.
Assuntos
Bacillus subtilis , Pseudomonas fluorescens , Bacillus subtilis/genética , Tensoativos/química , Tensoativos/farmacologia , Sabões , Microbiologia do Solo , Pseudomonas aeruginosa/genética , Pseudomonas aeruginosa/química , Solo/química , ÁguaRESUMO
The purpose of this cross-sectional survey study is to quantitatively examine the differences in patient trust towards physicians between four different clinical departments in a Chinese hospital. Using a validated modified Chinese version of the Wake Forest Physician Trust Scale, we measured patient trust in each department, and also collected data on patient demographics. A total of 436 patients or family members were surveyed in the departments of emergency medicine, pediatrics, cardiology, and orthopedic surgery. Significant differences were found between the departments, especially between pediatrics (trust score 43.23, range 11-50) and emergency medicine and cardiology (trust scores 45.29 and 45.79, respectively with range of 11-50). The average total score across all four departments was 44.72. There are indications that specifically comparing departments, such as patient demographics or department structure, could be helpful in tailoring patient care to improve physician-patient relationships.
Assuntos
Departamentos Hospitalares/tendências , Relações Médico-Paciente/ética , Confiança/psicologia , Adulto , Povo Asiático/psicologia , China , Estudos Transversais , Feminino , Departamentos Hospitalares/ética , Hospitais , Humanos , Masculino , Pessoa de Meia-Idade , Médicos/psicologia , Inquéritos e QuestionáriosRESUMO
Soil absorbs about 20% of anthropogenic carbon emissions annually, and clay is one of the key carbon-capture materials. Although sorption to clay is widely assumed to strongly retard the microbial decomposition of soil organic matter, enhanced degradation of clay-associated organic carbon has been observed under certain conditions. The conditions in which clay influences microbial decomposition remain uncertain because the mechanisms of clay-organic carbon interactions are not fully understood. Here we reveal the spatiotemporal dynamics of carbon sorption and release within model clay aggregates and the role of enzymatic decomposition by directly imaging a transparent smectite clay on a microfluidic chip. We demonstrate that clay-carbon protection is due to the quasi-irreversible sorption of high molecular-weight sugars within clay aggregates and the exclusion of bacteria from these aggregates. We show that this physically-protected carbon can be enzymatically broken down into fragments that are released into solution. Further, we suggest improvements relevant to soil carbon models.
RESUMO
Hybridization of introduced domesticates and closely related natives is well documented in annual crops. The widespread introduction of the domesticated grapevine, Vitis vinifera, into California where it overlaps with two native congenerics, with which it is interfertile, provides opportunity to investigate hybridization between woody perennials. Although geographically widespread, the introduction over the past two centuries has been limited to a few elite clonal cultivars, providing a unique opportunity to study the effects of hybridization on the native species. The amount of hybridization with V. vinifera and the genetic diversity of wild-growing Vitis californica and Vitis girdiana were examined using nineteen microsatellite markers. STRUCTURE analysis was used to define hybrid and introgressed individuals and to analyze genetic structure of the native species. FAMOZ software was used to identify which V. vinifera cultivars served as parents of F 1 hybrids. The three species were clearly distinguished by STRUCTURE analysis. Thirty percent of 119 V. californica vines were hybrids. The domesticated parent was identified for 16 F 1 hybrid vines; the original California cultivar, 'Mission', was the parent of eight. Backcrosses were also found, showing introgression into subsequent generations. Similar results were obtained for a small sample of V. girdiana. Removing hybrids greatly reduced the genetic variation of the presumed pure species, among which there was essentially no genetic structure. Limited genetic variability indicates the California natives may be threatened by genetic erosion. The discovery of F 1 hybrids of 'Mission', a cultivar not grown in the areas for ~100 years, suggests long generation times for wild vines that, often, grow into expansive liana and propagate by layering, all factors that limit recruitment in populations already disjunct by habitat lose. Hermaphroditic flowers and fruit that is more attractive to birds may favor the production of backcross seed and establishment of introgressed individuals.
RESUMO
The pattern of deformation of different structural components of a muscle-tendon complex when it is activated provides important information about the internal mechanics of the muscle. Recent experimental observations of deformations in contracting muscle have presented inconsistencies with current widely held assumption about muscle behavior. These include negative strain in aponeuroses, non-uniform strain changes in sarcomeres, even of individual muscle fibers and evidence that muscle fiber cross sectional deformations are asymmetrical suggesting a need to readjust current models of contracting muscle. We report here our use of finite element modeling techniques to simulate a simple muscle-tendon complex and investigate the influence of passive intramuscular material properties upon the deformation patterns under isometric and shortening conditions. While phenomenological force-displacement relationships described the muscle fiber properties, the material properties of the passive matrix were varied to simulate a hydrostatic model, compliant and stiff isotropically hyperelastic models and an anisotropic elastic model. The numerical results demonstrate that passive elastic material properties significantly influence the magnitude, heterogeneity and distribution pattern of many measures of deformation in a contracting muscle. Measures included aponeurosis strain, aponeurosis separation, muscle fiber strain and fiber cross-sectional deformation. The force output of our simulations was strongly influenced by passive material properties, changing by as much as ~80% under some conditions. The maximum output was accomplished by introducing anisotropy along axes which were not strained significantly during a muscle length change, suggesting that correct costamere orientation may be a critical factor in the optimal muscle function. Such a model not only fits known physiological data, but also maintains the relatively constant aponeurosis separation observed during in vivo muscle contractions and is easily extrapolated from our plane-strain conditions into a three-dimensional structure. Such modeling approaches have the potential of explaining the reduction of force output consequent to changes in material properties of intramuscular materials arising in the diseased state such as in genetic disorders.