Self-Polymerized Spiro-Type Interfacial Molecule toward Efficient and Stable Perovskite Solar Cells.

In the pursuit of highly efficient perovskite solar cells, spiro-OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self-polymerized spiro-type interfacial molecule, termed v-spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro-OMeTAD. Importantly, the vinyl groups in v-spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly-v-spiro-based device achieves an outstanding efficiency of 24.54 %, with an enhanced open-circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long-term stability in PSCs through innovative interfacial design.

Long non-coding RNA MIR22HG inhibits cell proliferation and migration in cholangiocarcinoma by negatively regulating the Wnt/ß-catenin signaling pathway.

BACKGROUND: Cholangiocarcinoma (CCA) is one of the most common primary biliary malignant tumors with a high mortality. MIR22HG has been reported to act as a tumor-suppressor gene in several types of cancers. However, the role and molecular regulatory mechanism of MIR22HG in CCA still remains unclear. The present study aimed to investigate the role and underlying mechanism of MIR22HG in CCA. METHODS: The expression of MIR22HG was detected by RT-qPCR assayin CCA tissues and cells. CCK-8, colony formation and transwell assays were performed to study the biological function of MIR22HG in CCA. Western blot and immunofluorescence assays were performed to detect the expression ofWnt/ß-catenin signaling pathway markers. In vivo assays were conducted to explore the biological role of MIR22HG. RESULTS: We first found that MIR22HG expression was significantly down-regulated in CCA tissues and cell lines. Moreover, MIR22HG expression was related to TNM stage and bore prognostic significance in CCA patients. Function experiments demonstrated that overexpression of MIR22HG inhibited cell proliferation, migration and invasion in CCA, whereas knockdown of MIR22HG caused the opposite result. It was found that MIR22HG negatively regulated mRNA and the expression levels of proteins in the Wnt/ß-catenin signaling pathway (ß-catenin, cyclin D1 and c-myc). The effect of MIR22HG overexpression on CCA progression could be partly rescued by activating the Wnt/ß-catenin signaling pathway. MIR22HG suppressed CCA tumorigenesis in vivo. CONCLUSIONS: In summary, the results of the present study show that MIR22HG repressed cell proliferation, migration and invasion in CCA by negatively regulating the Wnt/ß-catenin signaling pathway. MIR22HG may be a novel target for diagnosis and therapy in CCA.

Kornblum Oxidation Reaction-Induced Collective Transformation of Lead Polyhalides for Stable Perovskite Photovoltaics.

The iodide vacancy defects generated during the perovskite crystallization process are a common issue that limits the efficiency and stability of perovskite solar cells (PSCs). Although excessive ionic iodides have been used to compensate for these vacancies, they are not effective in reducing defects through modulating the perovskite crystallization. Moreover, these iodide ions present in the perovskite films can act as interstitial defects, which are detrimental to the stability of the perovskite. Here, an effective approach to suppress the formation of vacancy defects by manipulating the coordination chemistry of lead polyhalides during perovskite crystallization is demonstrated. To achieve this suppression, an α-iodo ketone is introduced to undergo a process of Kornblum oxidation reaction that releases halide ions. This process induces a rapid collective transformation of lead polyhalides during the nucleation process and significantly reduces iodide vacancy defects. As a result, the ion mobility is decreased by one order of magnitude in perovskite film and the PSC achieves significantly improved thermal stability, maintaining 82% of its initial power conversion efficiency at 85 °C for 2800 h. These findings highlight the potential of halide ions released by the Kornblum oxidation reaction, which can be widely used for achieving high-performance perovskite optoelectronics.

Spin coating epitaxial heterodimensional tin perovskites for light-emitting diodes.

Environmentally friendly tin (Sn) perovskites have received considerable attention due to their great potential for replacing their toxic lead counterparts in applications of photovoltaics and light-emitting diodes (LEDs). However, the device performance of Sn perovskites lags far behind that of lead perovskites, and the highest reported external quantum efficiencies of near-infrared Sn perovskite LEDs are below 10%. The poor performance stems mainly from the numerous defects within Sn perovskite crystallites and grain boundaries, leading to serious non-radiative recombination. Various epitaxy methods have been introduced to obtain high-quality perovskites, although their sophisticated processes limit the scalable fabrication of functional devices. Here we demonstrate that epitaxial heterodimensional Sn perovskite films can be fabricated using a spin-coating process, and efficient LEDs with an external quantum efficiency of 11.6% can be achieved based on these films. The film is composed of a two-dimensional perovskite layer and a three-dimensional perovskite layer, which is highly ordered and has a well-defined interface with minimal interfacial areas between the different dimensional perovskites. This unique nanostructure is formed through direct spin coating of the perovskite precursor solution with tryptophan and SnF2 additives onto indium tin oxide glass. We believe that our approach will provide new opportunities for further developing high-performance optoelectronic devices based on heterodimensional perovskites.

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells.

Incorporating mixed ion is a frequently used strategy to stabilize black-phase formamidinum lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. Herein, we find that the underlying reason is that the mixed halide perovskites generally fail to grow into homogenous and high-crystalline film, due to the multiple pathways of crystal nucleation originating from various intermediate phases in the film-forming process. Therefore, we design a multifunctional fluorinated additive, which restrains the complicated intermediate phases and promotes orientated crystallization of α-phase of perovskite. Furthermore, the additives in-situ polymerize during the perovskite film formation and form a hydrogen-bonded network to stabilize α-phase. Remarkably, the polymerized additives endow a strongly hydrophobic effect to the bare perovskite film against liquid water for 5 min. The unencapsulated devices achieve 24.10% efficiency and maintain >95% of the initial efficiency for 1000 h under continuous sunlight soaking and for 2000 h at air ambient of ~50% humid, respectively.

Efficient and bright warm-white electroluminescence from lead-free metal halides.

Solution-processed metal-halide perovskites are emerging as one of the most promising materials for displays, lighting and energy generation. Currently, the best-performing perovskite optoelectronic devices are based on lead halides and the lead toxicity severely restricts their practical applications. Moreover, efficient white electroluminescence from broadband-emission metal halides remains a challenge. Here we demonstrate efficient and bright lead-free LEDs based on cesium copper halides enabled by introducing an organic additive (Tween, polyethylene glycol sorbitan monooleate) into the precursor solutions. We find the additive can reduce the trap states, enhancing the photoluminescence quantum efficiency of the metal halide films, and increase the surface potential, facilitating the hole injection and transport in the LEDs. Consequently, we achieve warm-white LEDs reaching an external quantum efficiency of 3.1% and a luminance of 1570 cd m-2 at a low voltage of 5.4 V, showing great promise of lead-free metal halides for solution-processed white LED applications.

In Situ-Fabricated Perovskite Nanocrystals for Deep-Blue Light-Emitting Diodes.

Efficient and stable deep-blue emission from perovskite light-emitting diodes (LEDs) is required for their application in lighting and displays. However, this is difficult to achieve due to the phase segregation issue of mixed halide perovskites and the challenge of synthesizing high-quality single-halide deep-blue perovskite nanocrystals through a traditional method. Here, we show that an antisolvent treatment can facilitate the in situ formation of perovskite nanocrystals using a facile spin-coating method. We find that the dropping time of the antisolvent can significantly affect the constitution of nanocrystal perovskite films. With a delay in the start time of the antisolvent treatment, small single-halide perovskite nanocrystals can be achieved, exhibiting efficient deep-blue emission. The LED device shows a stable electroluminescence (EL) peak at 465 nm, with a peak external quantum efficiency and a peak current efficiency of 2.4% and 2.5 cd A-1, respectively. This work provides a facile approach to changing the size of perovskite nanocrystals, thus effectively tuning their EL emission spectra.

Fabrication of Active Surfaces with Metastable Microgel Layers Formed during Breath Figure Templating.

Patterned porous surfaces with responsive functionalities are fabricated by a thermoresponsive microgel-assisted breath figure (BF) process. When water droplets submerge into a polystyrene (PS) solution during formation of a porous surface by the bottom-up BF process, poly(N-isopropylacrylamide)-co-acrylic acid (PNIPAm-co-AA) microgels dispersed in the solution spontaneously assemble at the water-organic interfaces like "Pickering emulsions", reinforced by capillary flow. The conformal layer of PNIPAm-co-AA microgels lining the pores appears in images from a scanning electron microscope (SEM) either as a smooth surface layer (L) or as an array of domelike protrusions (D), depending on the conditions at which the sample was dried for SEM. The change between L and D morphology correlates with the volume phase transition behavior of the microgels freely suspended: drying at a temperature below the volume phase transition temperature (VPTT) gives L, and the D morphology is formed by drying at a temperature greater than the VPTT of PNIPAm-co-AA microgels. The morphological transition is shown to accompany a significant change in surface contact angle (CA) relative to a corresponding pore layer made of PS, with L having a CA that is reduced by 85° relative to PS, while the decrease is only 22° for D. Porous structures with morphologically responsive surfaces could find application in biocatalysis or tissue engineering, for example, with functional enzymes sequestered when microgels are collaped and accessible when the microgels are swollen.