Iridescent Daytime Radiative Cooling with No Absorption Peaks in the Visible Range.

Coatings for passive radiative cooling applications must be highly reflected in the solar spectrum, and thus can hardly support any coloration without losing their functionality. In this work, a colorful daytime radiative cooling surface based on structural coloration is reported. A designed radiative cooler with a bioinspired array of truncated SiO2 microcones is manufactured via a self-assembly method and reactive ion etching. Complemented with a silver reflector, the radiative cooler exhibits broadband iridescent coloration due to the scattering induced by the truncated microcone array while maintaining an average reflectance of 95% in the solar spectrum and a high thermal emissivity (ε) of 0.95, owing to the reduced impedance mismatch provided by the patterned surface at infrared wavelengths, reaching an estimated cooling power of ≈143 W m-2 at an ambient temperature of 25 °C and a measured average temperature drop of 7.1 °C under direct sunlight. This strong cooling performance is attributed to its bioinspired surface pattern, which promotes both the aesthetics and cooling capacity of the daytime radiative cooler.

Spectral decoupling of cooperative emissivity in silica-polymer metamaterials for radiative cooling.

Silica-polymer metamaterials are one promising candidate of radiative-cooling materials suitable for scalable manufacture. However, the strong coupling between the silica and polymer components and their respective contribution to total emission remain unexplored. In this work, we developed a 3D full-wave model for such a randomized composite system to retrieve the spectral emissivity of individual components and uncover the interacted physical mechanisms. The results demonstrate and decouple the cooperative emission in the scatter-medium system and quantitatively evaluate the geometry-dependent light-matter interactions, which sheds more light on silica-polymer metamaterials and provides helpful guidance for designing similar thermal-control materials.

Harnessing Reversible Wetting Transition to Sweep Contaminated Superhydrophobic Surfaces.

Sweeping deposited particles is absolutely essential in order to maintain the excellent functionality of superhydrophobic surfaces. Many methods have been proposed to sweep microparticles deposited on tips of micro/nanostructures. However, how to sweep nanoparticles trapped in cavities of superhydrophobic surfaces has remained an outstanding issue. Here, we show that harnessing the reversible wetting transition provides a feasible way to sweep such nanoparticles. Using molecular dynamics simulations, we demonstrate that the electrically induced CB-W wetting transition makes liquid intrude into a groove and wet a trapped hydrophilic nanoparticle; however, once the electric field is removed, a spontaneous W-CB dewetting transition happens, and the extruded liquid transports the hydrophilic nanoparticle to the groove top, successfully picking up the trapped hydrophilic nanoparticle. We further find that the adhesion between the nanoparticle and groove bottom wall hinders the successful pickup, and picking up such a nanoparticle requires a stronger particle hydrophilicity. With the introduction of amphiphilic Janus particles into a liquid, we exhibit that the electrically induced reversible wetting transition can also successfully pick up a trapped hydrophobic nanoparticle. By means of calculations of the potential of mean force (PMF), we reveal pathways of both the CB-W wetting transition and the W-CB dewetting transition and hence answer why and how a hydrophilic or a hydrophobic nanoparticle is picked up successfully.

Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting.

Converting low-grade heat into useful electricity requires a technology that is efficient and cost effective. Here, we demonstrate a cellulosic membrane that relies on sub-nanoscale confinement of ions in oxidized and aligned cellulose molecular chains to enhance selective diffusion under a thermal gradient. After infiltrating electrolyte into the cellulosic membrane and applying an axial temperature gradient, the ionic conductor exhibits a thermal gradient ratio (analogous to the Seebeck coefficient in thermoelectrics) of 24 mV K-1-more than twice the highest value reported until now. We attribute the enhanced thermally generated voltage to effective sodium ion insertion into the charged molecular chains of the cellulosic membrane, which consists of type II cellulose, while this process does not occur in natural wood or type I cellulose. With this material, we demonstrate a flexible and biocompatible heat-to-electricity conversion device via nanoscale engineering based on sustainable materials that can enable large-scale manufacture.

A new regime of nanoscale thermal transport: Collective diffusion increases dissipation efficiency.

Understanding thermal transport from nanoscale heat sources is important for a fundamental description of energy flow in materials, as well as for many technological applications including thermal management in nanoelectronics and optoelectronics, thermoelectric devices, nanoenhanced photovoltaics, and nanoparticle-mediated thermal therapies. Thermal transport at the nanoscale is fundamentally different from that at the macroscale and is determined by the distribution of carrier mean free paths and energy dispersion in a material, the length scales of the heat sources, and the distance over which heat is transported. Past work has shown that Fourier's law for heat conduction dramatically overpredicts the rate of heat dissipation from heat sources with dimensions smaller than the mean free path of the dominant heat-carrying phonons. In this work, we uncover a new regime of nanoscale thermal transport that dominates when the separation between nanoscale heat sources is small compared with the dominant phonon mean free paths. Surprisingly, the interaction of phonons originating from neighboring heat sources enables more efficient diffusive-like heat dissipation, even from nanoscale heat sources much smaller than the dominant phonon mean free paths. This finding suggests that thermal management in nanoscale systems including integrated circuits might not be as challenging as previously projected. Finally, we demonstrate a unique capability to extract differential conductivity as a function of phonon mean free path in materials, allowing the first (to our knowledge) experimental validation of predictions from the recently developed first-principles calculations.

Bottom-up Design of Three-Dimensional Carbon-Honeycomb with Superb Specific Strength and High Thermal Conductivity.

Low-dimensional carbon allotropes, from fullerenes, carbon nanotubes, to graphene, have been broadly explored due to their outstanding and special properties. However, there exist significant challenges in retaining such properties of basic building blocks when scaling them up to three-dimensional materials and structures for many technological applications. Here we show theoretically the atomistic structure of a stable three-dimensional carbon honeycomb (C-honeycomb) structure with superb mechanical and thermal properties. A combination of sp2 bonding in the wall and sp3 bonding in the triple junction of C-honeycomb is the key to retain the stability of C-honeycomb. The specific strength could be the best in structural carbon materials, and this strength remains at a high level but tunable with different cell sizes. C-honeycomb is also found to have a very high thermal conductivity, for example, >100 W/mK along the axis of the hexagonal cell with a density only ∼0.4 g/cm3. Because of the low density and high thermal conductivity, the specific thermal conductivity of C-honeycombs is larger than most engineering materials, including metals and high thermal conductivity semiconductors, as well as lightweight CNT arrays and graphene-based nanocomposites. Such high specific strength, high thermal conductivity, and anomalous Poisson's effect in C-honeycomb render it appealing for the use in various engineering practices.

Flexible n-type thermoelectric materials by organic intercalation of layered transition metal dichalcogenide TiS2.

Organic semiconductors are attracting increasing interest as flexible thermoelectric materials owing to material abundance, easy processing and low thermal conductivity. Although progress in p-type polymers and composites has been reported, their n-type counterpart has fallen behind owing to difficulties in n-type doping of organic semiconductors. Here, we present an approach to synthesize n-type flexible thermoelectric materials through a facile electrochemical intercalation method, fabricating a hybrid superlattice of alternating inorganic TiS2 monolayers and organic cations. Electrons were externally injected into the inorganic layers and then stabilized by organic cations, providing n-type carriers for current and energy transport. An electrical conductivity of 790 S cm(-1) and a power factor of 0.45 mW m(-1) K(-2) were obtained for a hybrid superlattice of TiS2/[(hexylammonium)x(H2O)y(DMSO)z], with an in-plane lattice thermal conductivity of 0.12 ± 0.03 W m(-1) K(-1), which is two orders of magnitude smaller than the thermal conductivities of the single-layer and bulk TiS2. High power factor and low thermal conductivity contributed to a thermoelectric figure of merit, ZT, of 0.28 at 373 K, which might find application in wearable electronics.

Dielectric Mismatch Mediates Carrier Mobility in Organic-Intercalated Layered TiS2.

The dielectric constant is a key parameter that determines both optical and electronic properties of materials. It is desirable to tune electronic properties though dielectric engineering approach. Here, we present a systematic approach to tune carrier mobilities of hybrid inorganic/organic materials where layered two-dimensional transition-metal dichalcogenide TiS2 is electrochemically intercalated with polar organic molecules. By manipulating the dielectric mismatch using polar organic molecules with different dielectric constants, ranging from 10 to 41, the electron mobility of the TiS2 layers was changed three times due to the dielectric screening of the Coulomb-impurity scattering processes. Both the overall thermal conductivity and the lattice thermal conductivity were also found to decrease with an increasing dielectric mismatch. The enhanced electrical mobility along with the decreased thermal conductivity together gave rise to a significantly improved thermoelectric figure of merit of the hybrid inorganic/organic materials at room temperature, which might find applications in wearable electronics.

Capillary rupture of suspended polymer concentric rings.

We present the first experimental study on the simultaneous capillary instability amongst viscous concentric rings suspended atop an immiscible medium. The rings ruptured upon annealing, with three types of phase correlation between neighboring rings. In the case of weak substrate confinement, the rings ruptured independently when they were sparsely distanced, but via an out-of-phase mode when packed closer. If the substrate confinement was strong, the rings would rupture via an in-phase mode, resulting in radially aligned droplets. The concentric ring geometry caused a competition between the phase correlation of neighboring rings and the kinetically favorable wavelength, yielding an intriguing, recursive surface pattern. This frustrated pattern formation behavior was accounted for by a scaling analysis.

Bending rigidity and Gaussian bending stiffness of single-layered graphene.

Bending rigidity and Gaussian bending stiffness are the two key parameters that govern the rippling of suspended graphene-an unavoidable phenomenon of two-dimensional materials when subject to a thermal or mechanical field. A reliable determination about these two parameters is of significance for both the design and the manipulation of graphene morphology for engineering applications. By combining the density functional theory calculations of energies of fullerenes and single wall carbon nanotubes with the configurational energy of membranes determined by Helfrich Hamiltonian, we have designed a theoretical approach to accurately determine the bending rigidity and Gaussian bending stiffness of single-layered graphene. The bending rigidity and Gaussian bending stiffness of single-layered graphene are 1.44 eV (2.31 × 10(-19) N m) and -1.52 eV (2.43 × 10(-19) N m), respectively. The bending rigidity is close to the experimental result. Interestingly, the bending stiffness of graphene is close to that of lipid bilayers of cells about 1-2 eV, which might mechanically justify biological applications of graphene.

Ultralow thermal conductivity of atomic/molecular layer-deposited hybrid organic-inorganic zincone thin films.

Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques with atomic level control enable a new class of hybrid organic-inorganic materials with improved functionality. In this work, the cross-plane thermal conductivity and volumetric heat capacity of three types of hybrid organic-inorganic zincone thin films enabled by MLD processes and alternate ALD-MLD processes were measured using the frequency-dependent time-domain thermoreflectance method. We revealed the critical role of backbone flexibility in the structural morphology and thermal conductivity of MLD zincone thin films by comparing the thermal conductivity of MLD zincone films with an aliphatic backbone to that with aromatic backbone. Much lower thermal conductivity values were obtained in ALD/MLD-enabled hybrid organic-inorganic zincone thin films compared to that of the ALD-enabled W/Al2O3 nanolaminates reported by Costescu et al. [Science 2004, 303, 989-990], which suggests that the dramatic material difference between organic and inorganic materials may provide a route for producing materials with ultralow thermal conductivity.

A heat transfer model for liquid film boiling on micro-structured surfaces.

High heat transfer coefficient (HTC) and critical heat flux (CHF) are achieved in liquid film boiling by coupling vibrant vapor bubbles with a capillary liquid film, which has thus received increased interest for thermal management of high-power electronics. Although some experimental progress has been made, a high-fidelity heat transfer model for liquid film boiling is lacking. This work develops a thermal-hydrodynamic model by considering both evaporation atop the wick and nucleate boiling inside the wick to simultaneously predict the HTC and CHF. Nucleate boiling is modeled with microlayer evaporation theory, where a unified scaling factor is defined to characterize the change of microlayer area with heat flux. The scaling factor η is found to be independent of wicking structure and can be determined from a few measurements. This makes our model universal to predict the liquid film boiling heat transfer for various micro-structured surfaces including micropillar, micropowder, and micromesh. This work not only sheds light on understanding fundamental mechanisms of phase-change heat transfer, but also provides a tool for designing micro-structured surfaces in thermal management.

From 1D chain to 3D network: a new family of inorganic-organic hybrid semiconductors MO3(L)(x) (M = Mo, W; L = organic linker) built on perovskite-like structure modules.

MO3 (M = Mo, W) or VI-VI binary compounds are important semiconducting oxides that show great promise for a variety of applications. In an effort to tune and enhance their properties in a systematic manner we have applied a designing strategy to deliberately introduce organic linker molecules in these perovskite-like crystal lattices. This approach has led to a wealth of new hybrid structures built on one-dimensional (1D) and two-dimensional (2D) VI-VI modules. The hybrid semiconductors exhibit a number of greatly improved properties and new functionality, including broad band gap tunability, negative thermal expansion, largely reduced thermal conductivity, and significantly enhanced dielectric constant compared to their MO3 parent phases.

The nature of strength enhancement and weakening by pentagon-heptagon defects in graphene.

The two-dimensional crystalline structures in graphene challenge the applicability of existing theories that have been used for characterizing its three-dimensional counterparts. It is crucial to establish reliable structure-property relationships in the important two-dimensional crystals to fully use their remarkable properties. With the success in synthesizing large-area polycrystalline graphene, understanding how grain boundaries (GBs) in graphene alter its physical properties is of both scientific and technological importance. A recent work showed that more GB defects could counter intuitively give rise to higher strength in tilt GBs (ref. 10). We show here that GB strength can either increase or decrease with the tilt, and the behaviour can be explained well by continuum mechanics. It is not just the density of defects that affects the mechanical properties, but the detailed arrangements of defects are also important. The strengths of tilt GBs increase as the square of the tilt angles if pentagon-heptagon defects are evenly spaced, and the trend breaks down in other cases. We find that mechanical failure always starts from the bond shared by hexagon-heptagon rings. Our present work provides fundamental guidance towards understanding how defects interact in two-dimensional crystals, which is important for using high-strength and stretchable graphene for biological and electronic applications.

Three-dimensional Ni/TiO2 nanowire network for high areal capacity lithium ion microbattery applications.

The areal capacity of nanowire-based microbatteries can be potentially increased by increasing the length of nanowires. However, agglomeration of high aspect ratio nanowire arrays could greatly degrade the performance of nanowires for lithium ion (Li-ion) battery applications. In this work, a three-dimensional (3-D) Ni/TiO(2) nanowire network was successfully fabricated using a 3-D porous anodic alumina (PAA) template-assisted electrodeposition of Ni followed by TiO(2) coating using atomic layer deposition. Compared to the straight Ni/TiO(2) nanowire arrays fabricated using conventional PAA templates, the 3-D Ni/TiO(2) nanowire network shows higher areal discharging capacity. The areal capacity increases proportionally with the length of nanowires. With a stable Ni/TiO(2) nanowire network structure, 100% capacity is retained after 600 cycles. This work paves the way to build reliable 3-D nanostructured electrodes for high areal capacity microbatteries.

Enhancing flow boiling heat transfer in microchannels for thermal management with monolithically-integrated silicon nanowires.

Thermal management has become a critical issue for high heat flux electronics and energy systems. Integrated two-phase microchannel liquid-cooling technology has been envisioned as a promising solution, but with great challenges in flow instability. In this work, silicon nanowires were synthesized in situ in parallel silicon microchannel arrays for the first time to suppress the flow instability and to augment flow boiling heat transfer. Significant enhancement in flow boiling heat transfer performance was demonstrated for the nanowire-coated microchannel heat sink, such as an early onset of nucleate boiling, a delayed onset of flow oscillation, suppressed oscillating amplitudes of temperature and pressure drop, and an increased heat transfer coefficient.

Ballistic Thermal Transport at Sub-10 nm Laser-Induced Hot Spots in GaN Crystal.

Ballistic thermal transport at nanoscale hotspots will greatly reduce the performance of a Gallium nitride (GaN) device when its characteristic length reaches the nanometer scale. In this work, the authors develop a tip-enhanced Raman thermometry approach to study ballistic thermal transport within the range of 10 nm in GaN, simultaneously achieving laser heating and measuring the local temperature. The Raman results show that the temperature increase from an Au-coated tip-focused hotspot up to two times higher (40 K) than that in a bare tip-focused region (20 K). To further investigate the possible mechanisms behind this temperature difference, the authors perform electromagnetic simulations to generate a highly focused heating field, and observe a highly localized optical penetration, within a range of 10 nm. The phonon mean free path (MFP) of the GaN substrate can thus be determined by comparing the numerical simulation results with the experimentally measured temperature increase which is in good agreement with the average MFP weighted by the mode-specific thermal conductivity, as calculated from first-principles simulations. The results demonstrate that the phonon MFP of a material can be rapidly predicted through a combination of experiments and simulations, which can find wide application in the thermal management of GaN-based electronics.

Near-Infrared Trapping by Surface Plasmons in Randomized Platinum-Ceramic Metamaterial for Thermal Barrier Coatings.

As the operation temperature of next generation gas turbine is targeted to be 1800 °C toward a higher efficiency and lower carbon emission, the near-infrared (NIR) thermal radiation becomes a major concern for the durability of the metallic turbine blades. Although thermal barrier coatings (TBCs) are applied to provide thermal insulations, they are translucent to the NIR radiation. It is a major challenge for TBCs to achieve optically thick with limited physical thickness (usually < 1 mm) for effectively shielding the NIR radiation damage. Here, an NIR metamaterial is reported, where a Gd2 Zr2 O7 ceramic matrix is randomly dispersed with microscale Pt (0.53 vol%) nanoparticles with a size of 100-500 nm. Attenuated by the Gd2 Zr2 O7 matrix, a broadband NIR extinction is achieved through the red-shifted plasmon resonance frequencies and higher-order multipole resonances of the Pt nanoparticles. A very high absorption coefficient of ≈3 × 104 m-1 , approaching the Rosseland diffusion limit for a typical coating thickness, minimizes the radiative thermal conductivity to ≈10-2  W m-1 K-1 and successfully shields the radiative heat transfer. This work suggests that constructing a conductor/ceramic metamaterial with tunable plasmonics could be a strategy to shield NIR thermal radiation for high temperature applications.

Near-Theoretical Thermal Conductivity Silver Nanoflakes as Reinforcements in Gap-Filling Adhesives.

The rapid development of highly integrated microelectronic devices causes urgent demands for advanced thermally conductive adhesives (TCAs) to solve the interfacial heat-transfer issue. Due to their natural 2D structure and isotropic thermal conductivity, metal nanoflakes are promising fillers blended with polymer to develop high-performance TCAs. However, achieving corresponding TCAs with thermal conductivity over 10 W m-1 K-1 at filler content below 30 vol% remains challenging so far. This longstanding bottleneck is mainly attributed to the fact that most current metal nanoflakes are prepared by "bottom-up" processes (e.g., solution-based chemical synthesis) and inevitably contain lattice defects or impurities, resulting in lower intrinsic thermal conductivities, only 20-65% of the theoretical value. Here, a "top-down" strategy by splitting highly purified Ag foil with nanoscale thickness is adopted to prepare 2D Ag nanoflakes with an intrinsic thermal conductivity of 398.2 W m-1 K-1 , reaching 93% of the theoretical value. After directly blending with epoxy, the resultant Ag/epoxy exhibits a thermal conductivity of 15.1 W m-1 K-1 at low filler content of 18.6 vol%. Additionally, in practical microelectronic cooling performance evaluations, the interfacial heat-transfer efficiency of the Ag/epoxy achieves ≈1.4 times that of the state-of-the-art commercial TCA.

High anisotropy in electrical and thermal conductivity through the design of aerogel-like superlattice (NaOH)0.5NbSe2.

Interlayer decoupling plays an essential role in realizing unprecedented properties in atomically thin materials, but it remains relatively unexplored in the bulk. It is unclear how to realize a large crystal that behaves as its monolayer counterpart by artificial manipulation. Here, we construct a superlattice consisting of alternating layers of NbSe2 and highly porous hydroxide, as a proof of principle for realizing interlayer decoupling in bulk materials. In (NaOH)0.5NbSe2, the electric decoupling is manifested by an ideal 1D insulating state along the interlayer direction. Vibration decoupling is demonstrated through the absence of interlayer models in the Raman spectrum, dominant local modes in heat capacity, low interlayer coupling energy and out-of-plane thermal conductivity (0.28 W/mK at RT) that are reduced to a few percent of NbSe2's. Consequently, a drastic enhancement of CDW transition temperature (>110 K) and Pauling-breaking 2D superconductivity is observed, suggesting that the bulk crystal behaves similarly to an exfoliated NbSe2 monolayer. Our findings provide a route to achieve intrinsic 2D properties on a large-scale without exfoliation.