Population structure and selection signal analysis of indigenous sheep from the southern edge of the Taklamakan Desert.

Analyzing the genetic diversity and selection characteristics of sheep (Ovis aries) holds significant value in understanding their environmental adaptability, enhancing breeding efficiency, and achieving effective conservation and rational utilization of genetic resources. In this study, we utilized Illumina Ovine SNP 50 K BeadChip data from four indigenous sheep breeds from the southern margin of the Taklamakan Desert (Duolang sheep: n = 36, Hetian sheep: n = 74, Kunlun sheep: n = 27, Qira black sheep: n = 178) and three foreign meat sheep breeds (Poll Dorset sheep: n = 105, Suffolk sheep: n = 153, Texel sheep: n = 150) to investigate the population structure, genetic diversity, and genomic signals of positive selection within the indigenous sheep. According to the Principal component analysis (PCA), the Neighbor-Joining tree (NJ tree), and Admixture, we revealed distinct clustering patterns of these seven sheep breeds based on their geographical distribution. Then used Cross Population Extended Haplotype Homozygosity (XP-EHH), Fixation Index (FST), and Integrated Haplotype Score (iHS), we identified a collective set of 32 overlapping genes under positive selection across four indigenous sheep breeds. These genes are associated with wool follicle development and wool traits, desert environmental adaptability, disease resistance, reproduction, and high-altitude adaptability. This study reveals the population structure and genomic selection characteristics in the extreme desert environments of native sheep breeds from the southern edge of the Taklimakan Desert, providing new insights into the conservation and sustainable use of indigenous sheep genetic resources in extreme environments. Additionally, these findings offer valuable genetic resources for sheep and other mammals to adapt to global climate change.

Plasma-Engraved Lattice-Matched NiO/NiFe2O4 Heterostructure with Ample Oxygen Vacancies for Efficient Water Electrolysis and Zn-Air Batteries.

Heterogeneous interface and defect engineering offer effective pathways to accelerate oxygen evolution reaction (OER) charge transfer kinetics and motivate optimal intrinsic catalytic activity. Herein, we report the lattice-matched NiO/NiFe2O4 heterostructure with ample oxygen vacancies (Vo-NiO/NiFe2O4) induced by a feasible hydrothermal followed by calcination and plasma-engraving assistant technique, which shows the unique porous microflower arrangement of intertwined nanosheets. Benefitting from the synergetic effects between lattice-matched heterointerface and oxygen vacancies induce the strong electronic coupling, optimized OH-/O2 diffusion pathway and ample active sites, thus-prepared Vo-NiO/NiFe2O4 presents a favorable OER performance with a low overpotential (261 mV @ 10 mA cm-2) and small Tafel slope (39.4 mV dec-1), even surpassing commercial RuO2 catalyst. Additionally, the two-electrode configuration water electrolyzer and rechargeable zinc-air battery assembled by Vo-NiO/NiFe2O4 catalyst show the potential practical application directions. This work provides an innovative avenue for strengthening OER performance toward water electrolysis and Zn-air batteries via the interface and vacancy engineering strategy.

Genome-wide selection reveals candidate genes associated with multiple teats in Hu sheep.

Increasing the number of teats in sheep helps to improve the survival rate of sheep lambs after birth. In order to analyze the candidate genes related to the formation of multiple teats in Hu sheep, the present study was conducted to investigate the genetic pattern of multiple teats in Hu sheep. In this study, based on genome-wide data from 157 Hu sheep, Fst, xp-EHH, Pi and iHS signaling were performed, and the top 5% signal regions of each analyzed result were annotated based on the Oar_v4.0 for sheep. The results show that a total of 142 SNP loci were selected. We found that PTPRG, TMEM117 and LRP1B genes were closely associated with polypodium formation in Hu sheep, in addition, among the candidate genes related to polypodium we found genes such as TMEM117, SLC25A21 and NCKAP5 related to milk traits. The present study screened out candidate genes for the formation of multiple teats at the genomic level in Hu sheep.

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium-Ion Batteries.

Although graphite materials with desirable comprehensive properties dominate the anode market of commercial lithium-ion batteries (LIBs), their low capacity during fast charging precludes further commercialization. In the present work, natural graphite (G) is reported not only to suffer from low capacity during fast charging, but also from charge failure after many charging cycles. Using different characterization techniques, severe graphite exfoliation, and continuously increasing solid electrolyte interphase (SEI) are demonstrated as reasons for the failure of G samples. An ultrathin artificial SEI is proposed, addressing these problems effectively and ensuring extremely stable operation of the graphite anode, with a capacity retention of ≈97.5% after 400 cycles at 1 C. Such an artificial SEI modification strategy provides a universal approach to tailoring and designing better anode materials for next-generation LIBs with high energy densities.

Wave front aberrations induced from biomechanical effects after customized myopic laser refractive surgery in finite element model.

PURPOSE: A customized myopic refractive surgery was simulated by establishing a finite element model of the human eye, after which we studied the wave front aberrations induced by biomechanical effects and ablation profile after wave front-guided LASIK surgery. METHODS: Thirty myopia patients (i.e., 60 eyes) without other eye diseases were selected. Their ages, preoperative spherical equivalent, astigmatism, and wave front aberration were then obtained, in addition to the mean spherical equivalent error range - 4 to - 8D. Afterward, wave front-guided customized LASIK surgery was simulated by establishing a finite element eye model, followed by the analysis of the wave front aberrations induced by the surface displacement from corneal biomechanical effects, as well as customized ablation profile. Finally, the preoperative and induced aberrations were statistically analyzed. RESULTS: Comatic aberrations were the main wave front abnormality induced by biomechanical effects, and the wave front aberrations induced by the ablation profile mainly included coma and secondary coma, as well as sphere and secondary-sphere aberrations. Overall, the total high-order aberrations (tHOAs), total coma (C31), and sphere ([Formula: see text]) increased after wave front-guided customized LASIK surgery. According to our correlation analyses, coma, sphere, and tHOAs were significantly correlated with decentration. Additionally, the material parameters of ocular tissue were found to affect the postoperative wave front aberrations. When the material parameters of the sclera remained constant but those of cornea increased, the induced wave front aberrations were reduced. CONCLUSION: All biomechanical effects of cornea and ablation profile had significant effects on postoperative wave front aberrations after customized LASIK refractive surgery; however, the effects of the ablation profile were more notorious. Additionally, the characteristics of biomechanical materials have influence on the clinical correction effect.

A Self-Jet Vapor-Phase Growth of 3D FeNi@NCNT Clusters as Efficient Oxygen Electrocatalysts for Zinc-Air Batteries.

Development of highly active, robust electrocatalysts to accelerate the sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial and challenging for the practical application of metal-air batteries. In this effort, a novel and facile self-jet vapor-phase growth approach is developed, from which highly dispersive FeNi alloy nanoparticles (NPs) encapsulated in N-doped carbon nanotubes (NCNT) grown on a cotton pad (FeNi@NCNT-CP) can be fabricated. The as-prepared FeNi@NCNT-CP clusters exhibit superior bifunctional catalytic activity, with a high half-wave potential of 0.85 V toward ORR and a low potential of 1.59 V at 10 mA cm-2 toward OER. Specifically, owing to the synergistic effects of FeNi alloy NPs and NCNT, FeNi@NCNT-CP clusters deliver excellent stability, demonstrating a small potential gap of 0.73 V between ORR and OER after operation for 10 000 cycles. Furthermore, FeNi@NCNT-CP serves as a cost-effective, superior catalyst for the cathode of a rechargeable Zn-air battery, outperforming a catalyst mixture of expensive Pt/C and IrO2 . FeNi@NCNT-CP provides a maximum power density of 200 mW cm-2 and a cycling stability of up to 250 h. This contribution provides new prospects to prepare non-noble electrocatalysts for metal-air battery cathodes.

BRD4 and PIN1 gene polymorphisms are associated with high pulse pressure risk in a southeastern Chinese population.

BACKGROUND: BRD4 and PIN1 have been described to be involved in inflammation and vascular endothelial cell dysfunction, which in turn may increase pulse pressure. HYPOTHESIS: Genetic mutations within the BRD4 and PIN1 genes could affect the risk of high pulse pressure. METHODS: A total of four single nucleotide polymorphisms (SNPs) (BRD4: rs4808278; PIN1: rs2233678, rs2287838, and rs2233682) were genotyped in a cohort of 666 hypertensive patients and 232 normotensive controls with Chinese Han origin. Generalized multifactor dimensionality reduction (GMDR) was used to screen the best interaction combination among the four SNPs within the BRD4 and PIN1 genes and diabetes. Logistic regression analysis was performed to calculate the odds ratio (ORs) (95% confidence interval (CI)) for the association between the four SNPs. RESULTS: Adjusted for age, weight, waist circumference, drinking, smoking, hypertension, and diabetes, high pulse pressure risk was significantly higher for carriers with the rs4808278-TT genotype in BRD4 than those with wild genotypes (OR: 0.400, 95% CI: 0.217-0.737, P* < 0.05). However, we did not find any significant association of rs2233678, rs2287838, and rs2233682 in PIN1 with high pulse pressure susceptibility after covariate adjustment. GMDR analysis indicated a significant three-locus model (P = 0.0107) involving rs4808278, rs2233678, and diabetes, the cross-validation consistency of the three-locus models was 9/10, and the testing accuracy was 57.47%. CONCLUSIONS: Genetic mutations within BRD4 (rs4808278) could affect the susceptibility to high pulse pressure in a southeastern Chinese population.

Effects of the LASIK flap thickness on corneal biomechanical behavior: a finite element analysis.

BACKGROUND: It is well known that the biomechanical properties change after LASIK refractive surgery. One reason is the impact of flap creation on the residual stroma. The results have revealed that the change is closely related with the flap thickness in several studies. However, the quantitative relationships between the distributions of displacement and stress on the corneal surface and flap thickness have not been studied. The aim of the study was to quantify evaluate the biomechanical change caused by the LASIK flap. METHODS: By building a finite element model of the cornea, the displacement, the stress and the strain on the corneal surface were analyzed. RESULTS: The results showed that the corneal flap could obviously cause the deformation of the anterior corneal surface. For example, the displacement of the corneal vertex achieved 15 µm more than that without corneal flap, when the thickness of corneal flap was 120 µm thick. This displacement was enough to cause the change of aberrations in the human eyes. In the central part of the cornea, the stress on the anterior corneal surface increased with flap thickness. But the change in the stress on the posterior corneal surface was significantly less than that on the anterior surface. In addition, the stress in the central part of the anterior corneal surface increased significantly as the intra-ocular pressure (IOP) increase. Furthermore the increase of IOP had a clearly less effect on stress distribution at the edge of the cornea. Distributions of strain on the corneal surface were similar to those of stress. CONCLUSIONS: The changes in the biomechanical properties of cornea after refractive surgery should not be ignored.

Porous yolk-shell microspheres as N-doped carbon matrix for motivating the oxygen reduction activity of oxygen evolution oriented materials.

It is highly challenging to explore high-performance bi-functional oxygen electrode catalysts for their practical application in next-generation energy storage and conversion devices. In this work, we synthesize hierarchical N-doped carbon microspheres with porous yolk-shell structure (NCYS) as a metal-free electrocatalyst toward efficient oxygen reduction through a template-free route. The enhanced oxygen reduction performances in both alkaline and acid media profit well from the porous yolk-shell structure as well as abundant nitrogen functional groups. Furthermore, such yolk-shell microspheres can be used as precursor materials to motivate the oxygen reduction activity of oxygen evolution oriented materials to obtain a desirable bi-functional electrocatalyst. To verify its practical utility, Zn-air battery tests are conducted and exhibit satisfactory performance, indicating that this constructed concept for preparation of bi-functional catalyst will afford a promising strategy for exploring novel metal-air battery electrocatalysts.

Efficient C-C bond splitting on Pt monolayer and sub-monolayer catalysts during ethanol electro-oxidation: Pt layer strain and morphology effects.

Efficient catalytic C-C bond splitting coupled with complete 12-electron oxidation of the ethanol molecule to CO2 is reported on nanoscale electrocatalysts comprised of a Pt monolayer (ML) and sub-monolayer (sML) deposited on Au nanoparticles (Au@Pt ML/sML). The Au@Pt electrocatalysts were synthesized using surface limited redox replacement (SLRR) of an underpotentially deposited (UPD) Cu monolayer in an electrochemical cell reactor. Au@Pt ML showed improved catalytic activity for ethanol oxidation reaction (EOR) and, unlike their Pt bulk and Pt sML counterparts, was able to generate CO2 at very low electrode potentials owing to efficient C-C bond splitting. To explain this, we explore the hypothesis that competing strain effects due to the Pt layer coverage/morphology (compressive) and the Pt-Au lattice mismatch (tensile) control surface chemisorption and overall activity. Control experiments on well-defined model Pt monolayer systems are carried out involving a wide array of methods such as high-energy X-ray diffraction, pair-distribution function (PDF) analysis, in situ electrochemical FTIR spectroscopy, and in situ scanning tunneling microscopy. The vibrational fingerprints of adsorbed CO provide compelling evidence on the relation between surface bond strength, layer strain and morphology, and catalytic activity.

A review of CO2 sequestration projects and application in China.

In 2008, the top CO2 emitters were China, United States, and European Union. The rapid growing economy and the heavy reliance on coal in China give rise to the continued growth of CO2 emission, deterioration of anthropogenic climate change, and urgent need of new technologies. Carbon Capture and sequestration is one of the effective ways to provide reduction of CO2 emission and mitigation of pollution. Coal-fired power plants are the focus of CO2 source supply due to their excessive emission and the energy structure in China. And over 80% of the large CO2 sources are located nearby storage reservoirs. In China, the CO2 storage potential capacity is of about 3.6 × 10(9) t for all onshore oilfields; 30.483 × 10(9) t for major gas fields between 900 m and 3500 m of depth; 143.505 × 10(9) t for saline aquifers; and 142.67 × 10(9) t for coal beds. On the other hand, planation, soil carbon sequestration, and CH4-CO2 reforming also contribute a lot to carbon sequestration. This paper illustrates some main situations about CO2 sequestration applications in China with the demonstration of several projects regarding different ways of storage. It is concluded that China possesses immense potential and promising future of CO2 sequestration.

Peptidoglycan-Chi3l1 interaction shapes gut microbiota in intestinal mucus layer.

The balanced gut microbiota in intestinal mucus layer plays an instrumental role in the health of the host. However, the mechanisms by which the host regulates microbial communities in the mucus layer remain largely unknown. Here, we discovered that the host regulates bacterial colonization in the gut mucus layer by producing a protein called Chitinase 3-like protein 1 (Chi3l1). Intestinal epithelial cells are stimulated by the gut microbiota to express Chi3l1. Once expressed, Chi3l1 is secreted into the mucus layer where it interacts with the gut microbiota, specifically through a component of bacterial cell walls called peptidoglycan. This interaction between Chi3l1 and bacteria is beneficial for the colonization of bacteria in the mucus, particularly for Gram-positive bacteria like Lactobacillus. Moreover, a deficiency of Chi3l1 leads to an imbalance in the gut microbiota, which exacerbates colitis induced by dextran sodium sulfate. By performing fecal microbiota transplantation from Villin-cre mice or replenishing Lactobacillus in IEC∆Chil1 mice, we were able to restore their colitis to the same level as that of Villin-cre mice. In summary, this study shows a 'scaffold model' for microbiota homeostasis by interaction between intestinal Chi3l1 and bacteria cell wall interaction, and it also highlights that an unbalanced gut microbiota in the intestinal mucus contributes to the development of colitis.

Unified ionic and radical C-4 alkylation and arylation of pyridines.

C-H Functionalization of pyridines is an efficient strategy to access pyridine derivatives occurring in pharmaceuticals, agrochemicals, and materials. Nucleophilic additions to pyridiniums via both ionic and radical species have proven particularly useful. However, these reactions suffer from poor regioselectivity. By identifying an enzyme-mimic pocket-type urea activation reagent, we report a general platform for pyridine C-4 functionalization. Both ionic and radical nucleophiles can be incorporated to achieve the alkylation and arylation. Notably, the highly regioselective C-4 radical arylation is disclosed for the first time. The broad scope of nucleophiles and pyridines renders this platform applicable to the late-stage functionalization of drug-like molecules and the preparation of complex biologically important molecules.

Synergized N and P co-doped Ti3C2Tx mxene enabling high-performance Li-air batteries.

Lithium-oxygen batteries (LOBs) with a theoretical energy density of up to 3500 Wh kg-1 hold a promise for the next-generation high-energy-density batteries. However, the slow oxygen reduction/evolution kinetics at the cathode limits the performance of Li-air batteries. The rational design of efficient catalysts is essential for the improvement of oxygen electrode reaction kinetics. Herein, we report a facile strategy to co-dope N and P atoms simultaneously into Ti3C2Tx (NP-Ti3C2Tx) MXene via an electrostatic self-assembly approach. The co-doped NP-Ti3C2Tx layers expose abundant active sites, providing more space for accommodating the formed Li2O2. Moreover, the N and P co-doping facilitates efficient electron transport in Ti3C2Tx MXene. The LOB with NP-Ti3C2TX catalyst delivers a high discharge capacity of 24,940 mAh/g at 1000 mA g-1. At a cut-off capacity of 1000 mAh/g, this battery runs continuously for 159, 276, 185, and 229 cycles at current densities of 1000, 2000, 3000, and 5000 mA g-1, respectively. Theoretical calculations unveil that N and P co-doping enables lower ηORR and ηOER of only 0.26 V and 0.13 V on Ti3C2Tx MXene, respectively. This work offers a feasible approach for constructing efficient MXene electrocatalysts for Li-air batteries.

Modulation of transport at the interface in the microporous layer for high power density proton exchange membrane fuel cells.

The proton exchange membrane (PEM) fuel cell is a device that demonstrates a significant potential for environmental sustainability, since it efficiently converts chemical energy into electrical energy. The microporous layer (MPL) in PEM fuel cells promotes gas transport and eliminates water. Nevertheless, the power density of PEM fuel cells is restricted by ohmic losses and mass transport losses in conventional MPLs. In this study, we enhanced the power density of proton exchange membrane (PEM) fuel cells through the identification of appropriate materials and the mitigation of mass transport losses occurring at the interface between the microporous layer and the catalyst layer. The incorporation of high electron conductivity, slip behavior at the interface between graphene and water, and rapid water evaporation facilitated by nanoporous graphene effectively address transport-related challenges. We evaluated two types of graphene as potential substitutes for carbon black in the microporous layer (MPL). The enhanced power density (up to 1.1 W cm-2) under all humidity conditions and reduced mass transport resistance (a 75 % reduction compared to carbon black MPL) make them promising candidates for next-generation PEM fuel cells. Furthermore, these findings provide guidance for controlling interfacial mass transport in colloidal systems.

Ruthenium atoms anchored on oxygen-modified molybdenum disulfide with strong interfacial coupling as efficient and stable catalysts for lithium-oxygen batteries.

Rechargeable non-aqueous lithium-oxygen batteries (LOBs) have garnered increasing attention owing to their high theoretical energy density. However, their slow cathodic kinetics hinder efficient battery reactions. Nanoscale catalysts can effectively enhance electrocatalytic activity and atomic utilization efficiency. However, the agglomeration of nanoscale catalysts (such as cluster and single atoms) during continuous discharge/charge cycles leads to decreased electrochemical performance and poor cyclic stability. Herein, the ruthenium (Ru) atomic sites anchored on an O-doped molybdenum disulfide (O-MoS2) catalyst (designated as Ru/O-MoS2) was fabricated using a facile impregnation and calcination method. Strong Ru-O coupling between Ru atoms and the O-MoS2 substrate optimizes the localized electronic structure, resulting in improved electrochemical performance and enhanced resistance to Ostwald ripening. When employed as a cathode catalyst for LOBs, Ru/O-MoS2 catalyst exhibits a high reversible specific capacity (18700.5 (±59.8) mAh g-1), good rate capability, and enhanced long-term stability (115 cycles, 1200 h). This study encourages facile and efficient strategies for the development of effective and stable electrocatalysts for use in LOBs.

Genetic analysis of key agronomic traits of local sheep breeds in Xinjiang, China.

The formation of sheep (Ovis aries) breeds is influenced by different ecological environments and populations with different living habits, resulting in the development of germplasm resources with stable genetic key agronomic traits. Thus, investigating the genetic mechanisms behind various agronomic traits can enhance the conservation and utilization of diverse sheep breeds. Here, we explored the sheep variome and selection signatures using the Ovine Infinium HD SNP BeadChip (600 K SNPs) from 23 sheep breeds, comprising a total of 1215 sheep. The genetic mechanisms of wool quality and tail morphology were analyzed by selective sweep and genome-wide association study. Based on the results of within-population selective sweep analysis, we performed gene network analysis and divided them into 6 gene communities. We identified genetic regions containing genes linked to sheep wool and tail, which have been and may continue to be important targets for breeding and selection. Furthermore, our results revealed the expression profiles of genes in these regions across different biological systems. Our study provides insights into categorizing sheep breeds into distinct gene communities, as well as references for constructing genetic network pathways related to key agronomic traits in sheep and other domestic animals.

Reheating-induced gel properties change and flavor evolution of surimi-based seafood: Effects and mechanisms.

This study investigated the effect of different reheating treatments on gel properties and flavor changes of surimi products. As the reheating temperature increased from 90 °C to 121 °C, the heat-induced proteolysis produced more abundant umami and sweet amino acids, which took part in the conversion of IMP to AMP, thus enhancing the taste profiles. Reheating increased the exposure of active -NH2 terminals in proteins, which boosted Maillard and Strecker reactions with carbonyl compounds originated from fatty acid oxidation, thus not only reducing the aldehydes and esters contents but also lowering the whiteness of surimi products. Reheating at 90 °C prohibited the production of warmed-over flavor (WOF) and well-preserved the textural characteristics, but high temperatures ≥100 °C were prone to generate furan as the major WOF substance and to destroy gel structures. Collectively, this study provides new insights on understanding the role of reheating on sensory properties of surimi products.

Population structure and selective signature of Kirghiz sheep by Illumina Ovine SNP50 BeadChip.

Objective: By assessing the genetic diversity and associated selective traits of Kirghiz sheep (KIR), we aim to uncover the mechanisms that contribute to sheep's adaptability to the Pamir Plateau environment. Methods: This study utilized Illumina Ovine SNP50 BeadChip data from KIR residing in the Pamir Plateau, Qira Black sheep (QBS) inhabiting the Taklamakan Desert, and commonly introduced breeds including Dorper sheep (DOR), Suffolk sheep (SUF), and Hu sheep (HU). The data was analyzed using principal component analysis, phylogenetic analysis, population admixture analysis, kinship matrix analysis, linkage disequilibrium analysis, and selective signature analysis. We employed four methods for selective signature analysis: fixation index (Fst), cross-population extended homozygosity (XP-EHH), integrated haplotype score (iHS), and nucleotide diversity (Pi). These methods aim to uncover the genetic mechanisms underlying the germplasm resources of Kirghiz sheep, enhance their production traits, and explore their adaptation to challenging environmental conditions. Results: The test results unveiled potential selective signals associated with adaptive traits and growth characteristics in sheep under harsh environmental conditions, and annotated the corresponding genes accordingly. These genes encompass various functionalities such as adaptations associated with plateau, cold, and arid environment (ETAA1, UBE3D, TLE4, NXPH1, MAT2B, PPARGC1A, VEGFA, TBX15 and PLXNA4), wool traits (LMO3, TRPS1, EPHA5), body size traits (PLXNA2, EFNA5), reproductive traits (PPP3CA, PDHA2, NTRK2), and immunity (GATA3). Conclusion: Our study identified candidate genes associated with the production traits and adaptation to the harsh environment of the Pamir Plateau in Kirghiz sheep. These findings provide valuable resources for local sheep breeding programs. The objective of this study is to offer valuable insights for the sustainable development of the Kirghiz sheep industry.

Bimetallic MOFs-Derived NiFe2O4/Fe2O3 Enabled Dendrite-free Lithium Metal Anodes with Ultra-High Area Capacity Based on An Intermittent Lithium Deposition Model.

In practical operating conditions, the lithium deposition behavior is often influenced by multiple coupled factors and there is also a lack of comprehensive and long-term validation for dendrite suppression strategies. Our group previously proposed an intermittent lithiophilic model for high-performance three-dimensional (3D) composite lithium metal anode (LMA), however, the electrodeposition behavior was not discussed. To verify this model, this paper presents a modified 3D carbon cloth (CC) backbone by incorporating NiFe2O4/Fe2O3 (NFFO) nanoparticles derived from bimetallic NiFe-MOFs. Enhanced Li adsorption capacity and lithiophilic modulation were achieved by bimetallic MOFs-derivatives which prompted faster and more homogeneous Li deposition. The intermittent model was further verified in conjunction with the density functional theory (DFT) calculations and electrodeposition behaviors. As a result, the obtained Li-CC@NFFO||Li-CC@NFFO symmetric batteries exhibit prolonged lifespan and low hysteresis voltage even under ultra-high current and capacity conditions (5 mA cm-2, 10 mAh cm-2), what's more, the full battery coupled with a high mass loading (9 mg cm-2) of LiFePO4 cathode can be cycled at a high rate of 5 C, the capacity retention is up to 95.2 % before 700 cycles. This work is of great significance to understand the evolution of lithium dendrites on the 3D intermittent lithiophilic frameworks.