Challenges and recent advances in erythropoietin stability.

Erythropoietin (EPO) is a pivotal hormone that regulates red blood cell production, predominantly synthesized by the kidneys and also produced by the liver. Since the introduction of recombinant human EPO (rh-EPO) in 1989 through recombinant DNA technology, the therapeutic landscape for anemia has been improved. rh-EPO's market expansion has been substantial, with its application extending across various conditions such as chronic kidney disease, cancer-related anemia, and other disorders. Despite its success, significant concerns remain regarding the stability of EPO, which is critical for preserving its biological activity and ensuring therapeutic efficacy under diverse environmental conditions. Instability issues, including degradation and loss of biological activity, challenge both drug development and treatment outcomes. Factors contributing to EPO instability include temperature fluctuations, light exposure, and interactions with other substances. To overcome these challenges, pharmaceutical research has focused on developing innovative strategies such as stabilizing agents, advanced formulation techniques, and optimized storage conditions. This review article explores the multifaceted aspects of EPO stability, examining the impact of instability on clinical efficacy and drug development. It also provides a comprehensive review of current stabilization strategies, including the use of excipients, lyophilization, and novel delivery systems.

Formulation and characterization of Phospholipon 90 G and tween 80 based transfersomes for transdermal delivery of eprosartan mesylate.

The objective of the current study was to formulate the eprosartan mesylate loaded transfersomes using different proportions of Phospholipon® 90 G and Tween® 80 (95-75:5-25% w/w). The prepared transfersomes were characterized for their vesicles size, shape, polydispersity index, zeta potential, entrapment efficiency, in vitro skin permeation, confocal laser scanning microscopy, and in vivo skin irritation. Results revealed that the formulated transfersomes were negatively charged, spherical unilamellar structure of 71.18-85.66 nm with entrapment efficiency of 83.00-88.19%, and presented transdermal flux of 1.78-5.02 µg/cm2/h across rat skin. Confocal laser scanning microscopy confirmed that the formulated rhodamine 6 G loaded transfersomes could penetrate deeply and uniformly into rat skin. Additionally, in vivo skin irritation studies revealed that the prepared transfersomes were devoid of any skin irritation potential (erythema and edema). Results of this study revealed that the transfersomes prepared with Tween® 80 could be used to enhance the transdermal delivery of eprosartan mesylate. In conclusion, transdermal transfersomes formulation may prove to be an encouraging drug carrier for eprosartan mesylate and other actives, particularly owing to their simple formulation and unsophisticated scale-up methods.

Formulation and characterization of novel soft nanovesicles for enhanced transdermal delivery of eprosartan mesylate.

The objective of the present work was to formulate, optimize and evaluate the potential of novel soft nanovesicles i.e. nano-transfersomes, containing eprosartan mesylate (EM) for transdermal delivery. Nano-transfersomes of EM were developed using Phospholipon 90G, Span 80 (SP) and sodium deoxycholate (SDC) and characterized for vesicle size, shape, entrapment efficiency, in vitro skin permeation study and confocal laser scanning microscopy. The optimized nano-transfersomes formulation showed vesicles size of 108.53 ± 0.06 nm and entrapment efficiency of 63.00 ± 2.76%. The optimized nano-transfersomes provided an improved transdermal flux of 27.22 ± 0.29 µg/cm2/h with an enhancement ratio of 16.80 over traditional liposomes through Wistar rat skin. Confocal laser microscopy of rat skin treated with the optimized formulation showed that the formulation was eventually distributed and permeated deep into the rat skin. The present investigation has shown that the nature and concentration of surfactants (edge activators) influence immense control on the characteristics of nano-transfersomes. It was concluded that the developed nano-transfersomes surmount the limitation of low penetration ability of the traditional liposomes across the rat skin. Improved drug delivery presented by nano-transfersomes establishes this system as an encouraging dosage form for the delivery of EM via skin route.

Enhancing Gentamicin Antibacterial Activity by Co-Encapsulation with Thymoquinone in Liposomal Formulation.

BACKGROUND AND PURPOSE: Gentamicin (GEN) is a broad-spectrum antibiotic that cannot be prescribed freely because of its toxicity. Thymoquinone (THQ), a phytochemical, has antibacterial, antioxidant, and toxicity-reducing properties. However, its hydrophobicity and light sensitivity make it challenging to utilize. This incited the idea of co-encapsulating GEN and THQ in liposomes (Lipo-GEN-THQ). METHOD: Lipo-GEN-THQ were characterized using the zeta-potential, dynamic light scattering, Fourier transform infrared spectroscopy, and transmission electron microscope (TEM). The liposomes' stability was evaluated under different storage and biological conditions. Lipo-GEN-THQ's efficacy was investigated by the minimum inhibitory/bactericidal concentrations (MICs-MBCs), time-kill curves, and antibiofilm and antiadhesion assays. Bacterial interactions with the empty and GEN-THQ-loaded liposomes were evaluated using TEM. RESULTS: The Lipo-GEN-THQ were spherical, monodispersed, and negatively charged. The Lipo-GEN-THQ were relatively stable and released GEN sustainably over 24 h. The liposomes exhibited significantly higher antibacterial activity than free GEN, as evidenced by the four-fold lower MIC and biofilm eradication in resistant E. coli strain (EC-219). TEM images display how the empty liposomes fused closely to the tested bacteria and how the loaded liposomes caused ultrastructure damage and intracellular component release. An antiadhesion assay showed that the Lipo-GEN-THQ and free GEN (0.125 mg/L) similarly inhibited Escherichia coli (EC-157) adhesion to the A549 cells (68% vs. 64%). CONCLUSIONS: The Lipo-THQ-GEN enhanced GEN by combining it with THQ within the liposomes, reducing the effective dose. The reduction in the GEN dose after adding THQ may indirectly reduce the toxicity and aid in developing an enhanced and safer form of GEN.

An Explorative Review on Advanced Approaches to Overcome Bacterial Resistance by Curbing Bacterial Biofilm Formation.

The continuous emergence of multidrug-resistant pathogens evoked the development of innovative approaches targeting virulence factors unique to their pathogenic cascade. These approaches aimed to explore anti-virulence or anti-infective therapies. There are evident concerns regarding the bacterial ability to create a superstructure, the biofilm. Biofilm formation is a crucial virulence factor causing difficult-to-treat, localized, and systemic infections. The microenvironments of bacterial biofilm reduce the efficacy of antibiotics and evade the host's immunity. Producing a biofilm is not limited to a specific group of bacteria; however, Pseudomonas aeruginosa, Acinetobacter baumannii, and Staphylococcus aureus biofilms are exemplary models. This review discusses biofilm formation as a virulence factor and the link to antimicrobial resistance. In addition, it explores insights into innovative multi-targeted approaches and their physiological mechanisms to combat biofilms, including natural compounds, phages, antimicrobial photodynamic therapy (aPDT), CRISPR-Cas gene editing, and nano-mediated techniques.

Tween 80-Based Self-Assembled Mixed Micelles Boost Valsartan Transdermal Delivery.

Valsartan (Val) is an important antihypertensive medication with poor absorption and low oral bioavailability. These constraints are due to its poor solubility and dissolution rate. The purpose of this study was to optimize a mixed micelle system for the transdermal delivery of Val in order to improve its therapeutic performance by providing prolonged uniform drug levels while minimizing drug side effects. Thin-film hydration and micro-phase separation were used to produce Val-loaded mixed micelle systems. A variety of factors, including the surfactant type and drug-to-surfactant ratio, were optimized to produce micelles with a low size and high Val entrapment efficiency (EE). The size, polydispersity index (PDI), zeta potential, and drug EE of the prepared micelles were all measured. The in vitro drug release profiles were assessed using dialysis bags, and the permeation through abdominal rat skin was assessed using a Franz diffusion cell. All formulations had high EE levels exceeding 90% and low particle charges. The micellar sizes ranged from 107.6 to 191.7 nm, with average PDI values of 0.3. The in vitro release demonstrated a uniform slow rate that lasted one week with varying extents. F7 demonstrated a significant (p < 0.01) transdermal efflux of 68.84 ± 3.96 µg/cm2/h through rat skin when compared to the control. As a result, the enhancement factor was 16.57. In summary, Val-loaded mixed micelles were successfully prepared using two simple methods with high reproducibility, and extensive transdermal delivery was demonstrated in the absence of any aggressive skin-modifying enhancers.

Chitosan-Coated Azithromycin/Ciprofloxacin-Loaded Polycaprolactone Nanoparticles: A Characterization and Potency Study.

Purpose: Antimicrobial resistance is a major health hazard worldwide. Combining azithromycin (AZ) and ciprofloxacin (CIP) in one drug delivery system was proposed to boost their antibacterial activity and overcome resistance. This study aims to improve azithromycin and ciprofloxacin activity by co-encapsulating them inside chitosan-coated polymeric nanoparticles and evaluating their antibacterial activity. Methods: The double emulsion method was employed to co-encapsulate AZ/CIP inside chitosan-coated polymeric nanoparticles. The formulations were evaluated for their nanoparticle size, size distribution, and zeta potential. Differential scanning calorimetry (DSC) analysis characterized the formula's thermal sustainability. Encapsulation efficiency was measured by HPLC and spectrophotometric analysis. Morphological studies used the Transmission Electron Microscopy (TEM). The in vitro release profiles of both AZ and CIP were monitored utilizing the dialysis membrane bag method. The micro-dilution assay assessed the antimicrobial activity against a clinical isolate of Klebsiella pneumoniae. Results: The prepared AZ/CIP-poly-caprolactone nanoparticles were spherical; their size range was 184.0 ± 3.3-190.4 ± 5.6 nm and had high size uniformity (poly-dispersity index below 0.2). The zeta potential ranged from -21.2 ± 2.4 to -27.0 ± 2.5 mV, while chitosan-coated nanoparticles showed a positive zeta potential value ranging from 8 to 11 mV. The thermal study confirmed the amorphous state of both antibiotics inside the nanoparticles. The results of the in vitro release study indicated a slow and uniform rate of release for both drugs extended over 4-days, with a faster rate in the case of AZ. The MIC values reported for both chitosan-coated NP have been tremendously reduced by at least 15 folds of pure CIP and more than 60 folds of pure AZ. Conclusion: The co-encapsulation of AZ/CIP into chitosan-coated polymeric nanoparticles has been successfully achieved. The produced particles showed many beneficial attributes of uniform particle sizes below 200 nm and high zeta potential values. Chitosan-coated polymeric nanoparticles extensively enhanced the antibacterial activity of both AZ/CIP against bacteria.

Novel erythropoietin-loaded nanoparticles with prolonged in vivo response.

The aim of this study was to incorporate human recombinant erythropoietin (EPO) in biodegradable polymeric nanoparticles targeting a prolonged-release effect. EPO-loaded poly(DL-lactide-co-glycolide) nanoparticles were prepared using double emulsion method (w/o/w) with least process-related stress on the encapsulated drug. The nanoparticles have been fully characterized including in vitro release profile. The biological activity was assessed in vivo using BALB-c mice. The produced particles appeared spherical in shape with smooth regular surfaces and had an average particle size of 225.9 ± 3.8 nm. The entrapment efficiency was 33.3%. The in vitro release profile exhibited a biphasic mode with a burst of 50% cumulative drug release, followed by a slow rate of release over 24 h, reaching a maximum of 82%. The bioassay results showed that EPO-loaded nanoparticles were able to maintain the physiological activity of EPO for 14 days after single subcutaneous injection compared with pure and marketed EPO formulae (EPREX®).

Theophylline colon specific tablets for chronotherapeutic treatment of nocturnal asthma.

The ultimate goal is to design a new chronotherapeutic system for theophylline (TPH) with high potential benefits in treating nocturnal asthma. TPH core tablets were prepared by wet granulation using a developed formula. Compression coating over core tablets containing 200 mg TPH was done using granulated chitosan with 10% PVP K30. Different formulae F1, F2 and F3 were prepared using coat weights 260, 300 and 360 mg, respectively. The in vitro release characteristics in both variant pH media mimicking the gastrointestinal media and in media containing rat cecal content were monitored. The in vivo performance of the optimum formula was compared with Avolen(®) SR in Beagle dogs. F3 with high coat thickness exhibited a minimal release after 5-h release study. Both F2 and F3 showed more than 50% drug release after 4 h in the rat cecal medium. This reflects the colon selectivity of the system. The C(max) values were found to be 5.49 ± 0.46 and 5.12 ± 0.85 µg/mL for F3 and Avolen(®) SR, respectively, F3 showed higher mean plasma concentration than Avolen(®) SR from the beginning and continued till 7 h post administration indicating high potential as chronotherapeutic treatment of nocturnal asthma.

Celecoxib-Loaded Solid Lipid Nanoparticles for Colon Delivery: Formulation Optimization and In Vitro Assessment of Anti-Cancer Activity.

This work aimed to optimize a celecoxib (CXB)-loaded solid lipid nanoparticles (SLN) colon delivery system for the enhancement of anticancer activity. An ultrasonic melt-emulsification method was employed in this work for the preparation of SLN. The physical attributes were characterized for their particle sizes, charges, morphology, and entrapment efficiency (%EE), in addition to DSC and FTIR. The in vitro drug release profiles were evaluated, and the anticancer activity was examined utilizing an MTT assay in three cancer cell lines: the colon cancer HT29, medulloblastoma Daoy, and hepatocellular carcinoma HepG2 cells. All of the prepared SLN formulations had nanoscale particle sizes ranging from 238 nm to 757 nm. High zeta-potential values (mv) within -30 s mv were reported. The %EE was in the range 86.76-96.6%. The amorphous nature of the SLN-entrapped CXB was confirmed from SLN DSC thermograms. The in vitro release profile revealed a slow constant rate of release with no burst release, which is unusual for SLN. Both the F9 and F14 demonstrated almost complete CXB release within 24 h, with only 25% completed within the first 5 h. F9 caused a significant percentage of cell death in the three cancer cell lines tested after 24 h of incubation and maintained this effect for 72 h. The prepared CXB-loaded SLN exhibited unique properties such as slow release with no burst and a high %EE. The anticancer activity of one formulation was extremely significant in all tested cancer cell lines at all incubation times, which is very promising.

Antibacterial Efficacy of Liposomal Formulations Containing Tobramycin and N-Acetylcysteine against Tobramycin-Resistant Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii.

The antibacterial activity and biofilm reduction capability of liposome formulations encapsulating tobramycin (TL), and Tobramycin-N-acetylcysteine (TNL) were tested against tobramycin-resistant strains of E. coli, K. pneumoniae and A. baumannii in the presence of several resistant genes. All antibacterial activity were assessed against tobramycin-resistant bacterial clinical isolate strains, which were fully characterized by whole-genome sequencing (WGS). All isolates acquired one or more of AMEs genes, efflux pump genes, OMP genes, and biofilm formation genes. TL formulation inhibited the growth of EC_089 and KP_002 isolates from 64 mg/L and 1024 mg/L to 8 mg/L. TNL formulation reduced the MIC of the same isolates to 16 mg/L. TNL formulation was the only effective formulation against all A. baumannii strains compared with TL and conventional tobramycin (in the plektonic environment). Biofilm reduction was significantly observed when TL and TNL formulations were used against E. coli and K. pneumoniae strains. TNL formulation reduced biofilm formation at a low concentration of 16 mg/L compared with TL and conventional tobramycin. In conclusion, TL and TNL formulations particularly need to be tested on animal models, where they may pave the way to considering drug delivery for the treatment of serious infectious diseases.

Rapid and Sensitive Liquid Chromatographic Method for Determination of Anastrozole in Different Polymer-Lipid Hybrid Nanoparticles.

Anastrozole, an aromatase inhibitor drug, is used for the treatment of breast cancer in pre- and postmenopausal women. Anastrozole's incorporation into nanoparticulate carriers would enhance its therapeutic performance. To perceive the exact loaded amount of drug in nanocarriers, a valid analytical method is required. The reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated by using the C18 column, 150 × 4.6 mm, 5 µm particle size, in isocratic mobile phase composed of 50:50 V/V (volume/volume) acetonitrile-phosphate buffer (pH 3) flowing at a rate of 1.0 mL/min, and a diode array detector (DAD) set at λmax = 215 nm. The validation parameters such as linearity, accuracy, specificity, precision, and robustness have proven the accuracy of the method, with the relative standard deviation percentage (% RSD) values < 2. The limit of detection of the method was found equal to 0.0150 µg/mL, and the limit of quantitation was 0.0607 µg/mL. The percent recovery of sample was in the range of 98.04-99.25%. The method has the advantage of being rapid with a drug retention time of 2.767 min, specific in terms of resolution of peaks void of interference with any of the excipients, and high reproducibility. This makes it highly applicable for quality control purposes.

Optimization of 5-flurouracil solid-lipid nanoparticles: a preliminary study to treat colon cancer.

Solid lipid nanoparticle (SLNs) formulae were utilized for the release of 5-flurouracil (5-FU) inside the colonic medium for local treatment of colon cancer. SLNs were prepared by double emulsion-solvent evaporation technique (w/o/w) using triglyceride esters, Dynasan™ 114 or Dynasan™ 118 along with soyalecithin as the lipid parts. Different formulation parameters; including type of Dynasan, soyalicithin:Dynasan ratio, drug:total lipid ratio, and polyvinyl alcohol (PVA) concentration were studied with respect to particle size and drug entrapment efficiency. Results showed that formula 8 (F8) with composition of 20% 5-FU, 27% Dynasan™ 114, and 53% soyalithicin andformula 14 (20% 5-FU, 27% Dynasan™ 118, and 53% soyalithicin), which were stabilized by 0.5% PVA, as well as F10 with similar composition as F8 but stabilized by 2% PVA were considered the optimum formulae as they combined small particle size and relatively high encapsulation efficiencies. F8 had a particle size of 402.5 nm ± 34.5 with a polydispersity value of 0.005 and an encapsulation efficiency of 51%, F10 had a 617.3 ± 54.3 nm particle size with 0.005 polydispersity value and 49.1% encapsulation efficiency, whereas formula F14 showed a particle size of 343 nm ± 29 with 0.005 polydispersity, and an encapsulation efficiency of 59.09%. DSC and FTIR results suggested the existence of the lipids in the solid crystalline state. Incomplete biphasic prolonged release profile of the drug from both formulae was observed in phosphate buffer pH 6.8 as well as simulated colonic medium containing rat caecal contents. A burst release with magnitudes of 26% and 28.8% cumulative drug released were noticed in the first hour samples incubated in phosphate buffer pH 6.8 for both F8 and F14, respectively, followed by a slow release profile reaching 50% and 52% after 48 hours.

Sectional Connective Tissue Technique Combined With an Emergence Profile Provisional for Gingival Margin Stabilization During Immediate Implant Placement: A Case Report With a 2-Year Follow-Up.

INTRODUCTION: Little is known regarding maintaining free gingival margin stability after immediate implant placement. Therefore, we present a sequential technique incorporating a sectional connective tissue graft with an emergence tissue provisional to stabilize the free gingival margin position during immediate implant placement in the esthetic zone. CASE PRESENTATION: A 57-year-old male was referred for assessment and treatment of a failing maxillary right central incisor. Clinical examination revealed poor retentive features, recurrent caries, and exposed endodontic material rendering a poor prognosis for the remaining tooth root system. After comprehensive evaluation, as well as understanding important patient case expectations, a decision was made to remove the existing tooth and place an immediate implant with a staged-provisional approach. To maintain the free gingival mid-facial height, a sectional-connective tissue graft technique was used concurrently with a custom emergence profile provisional to stabilize the gingiva immediately post-implant placement. CONCLUSION: Patients undergoing implant replacement of failing anterior maxillary teeth are at risk of esthetic complications. Marginal stability of the facial gingival is an important component of establishing and maintaining the final esthetic outcome. In cases where the initial hard or soft tissue thickness may put the patient at risk, combining soft and hard tissue augmentation with attention to emergence profile provisionalization appears to aid in the initial stability of the buccal free gingival margin. This report details the steps associated with a sectional connective tissue technique combined with emergence profile provisonalization and characterizes the gingival stability up to 2.5 years obtained with this approach.

Correlation between global longitudinal strain and SYNTAX score in coronary artery disease evaluation.

BACKGROUND: Speckle tracking echocardiography may allow the evaluation of myocardial systolic and diastolic dynamics across different physiologic and pathologic conditions beyond traditional echocardiographic techniques. The use of STE longitudinal strain in identification and risk stratification of CAD has good reproducibility and accuracy. The study aims to detect the relationship between SYNTAX score and global longitudinal peak systolic strain (GLPSS) in patients undergoing coronary angiography, with no history of myocardial infarction. RESULTS: The study included 70 symptomatic patients suspected to have chronic coronary syndrome aging 20-80 years (excluding those with significant structural heart disease). All patients underwent clinical evaluation, surface ECG, laboratory assessment, transthoracic echocardiographic (TTE), color TDI tracings, two-dimensional speckle tracking, and conventional coronary angiography with SYNTAX score calculation. Patients were divided into 3 groups based on the results of the coronary angiogram: normal CAD on angiogram (n = 10, control group), low SS (n = 25, SS < 22), and high SS (n = 35, SS ≥ 22). The mean age was 55 ± 9.6 years; 54% were males; two third of patients were hypertensive; 52% were diabetic; high percentage of high syntax score were noticed among males, diabetic patients, and smokers; and also low mean of GLS was noticed among diabetic patients and smokers. There was a statistically significant positive correlation between syntax score and each of LVEDD and LVESD and, on the other hand, statistically significant negative correlation between syntax score and each of E/A, GLS, AP2LS, AP3LS, and AP4LS was noticed. Peak GLS cutoff value of 17.8 and 16.5 showed 84% and 93% sensitivity and 70% and 91% specificity to detect high and low syntax score, respectively. CONCLUSION: 2D longitudinal strain analysis has incremental diagnostic value over visual assessment during echocardiography in predicting significant coronary artery disease; GLS may offer a potential sensitive tool to detect significant CAD.

Novel Self-Assembled Polycaprolactone-Lipid Hybrid Nanoparticles Enhance the Antibacterial Activity of Ciprofloxacin.

Ciprofloxacin (CIP), a widely used antibiotic, is a poor biopharmaceutical resulting in low bioavailability. We optimized a CIP polymer-lipid hybrid nanoparticle (CIP-PLN) delivery system to enhance its biopharmaceutical attributes and the overall therapeutic performance. CIP-PLN formulations were prepared by a direct emulsification-solvent-evaporation method. Varying the type and ratio of lipid was tried to optimize a CIP-PLN formulation. All the prepared formulations were evaluated for their particle size, polydispersity index, zeta potential, physical stability, and drug entrapment efficiency. The drug in vitro release profile was also studied. Antibacterial activities were tested by the agar diffusion method for all CIP-PLN formulations against an Escherichia coli clinical bacterial isolate (EC04). CIP-PLN formulations showed average sizes in the range of 133.9 ± 1.7 nm to 217.1 ± 0.8 nm, exhibiting high size uniformity as indicated by polydispersity indices lower than 0.25. The entrapment efficiency was close to 80% for all formulations. The differential scanning calorimetry (DSC) thermograms indicated the existence of CIP in the amorphous state in all PLN formulations. Fourier transform infrared spectra indicated deep incorporation of molecular CIP within the polymer matrix. The release profile of CIP from PLN formulas showed a uniform prolonged drug profile, extended for a week from most formulations with a zero-order kinetics. The antibacterial activity of CIP-PLN formulations showed significantly higher antibacterial activity only with F4 containing lecithin as the lipid component. In conclusion, we successfully optimized a CIP-PLN formulation with a low nanoparticle size in a close range, high percentage of entrapment efficiency and drug loading, uniform prolonged release rate, and higher antibacterial activity against the EC04 clinical isolate.

Optimized Polyethylene Glycolylated Polymer-Lipid Hybrid Nanoparticles as a Potential Breast Cancer Treatment.

PURPOSE: The aim of this work is to optimize a polyethylene glycolated (PEGylated) polymer-lipid hybrid nanoparticulate system for the delivery of anastrozole (ANS) to enhance its biopharmaceutical attributes and overall efficacy. METHODS: ANS loaded PEGylated polymer-lipid hybrid nanoparticles (PLNPs) were prepared by a direct emulsification solvent evaporation method. The physical incorporation of PEG was optimized using variable ratios. The produced particles were evaluated to discern their particle size and shape, zeta-potential, entrapment efficiency, and physical stability. The drug-release profiles were studied, and the kinetic model was analyzed. The anticancer activity of the ANS PLNPs on estrogen-positive breast cancer cell lines was determined using flow cytometry. RESULTS: The prepared ANS-PLNPs showed particle sizes in the range of 193.6 ± 2.9 to 218.2 ± 1.9 nm, with good particle size uniformity (i.e., poly-dispersity index of around 0.1). Furthermore, they exhibited relatively low zeta-potential values ranging from -0.50 ± 0.52 to 6.01 ± 4.74. The transmission electron microscopy images showed spherical shape of ANS-PLNPs and the compliance with the sizes were revealed by light scattering. The differential scanning calorimetry DSC patterns of the ANS PLNPs revealed a disappearance of the characteristic sharp melting peak of pure ANS, supporting the incorporation of the drug into the polymeric matrices of the nanoparticles. Flow cytometry showed the apoptosis of MCF-7 cell lines in the presence of ANS-PLNPs. CONCLUSION: PEGylated polymeric nanoparticles presented a stable encapsulated system with which to incorporate an anticancer drug (ANS) with a high percentage of entrapment efficiency (around 80%), good size uniformity, and induction of apoptosis in MCF-7 cells.

Enhancing azithromycin antibacterial activity by encapsulation in liposomes/liposomal-N-acetylcysteine formulations against resistant clinical strains of Escherichia coli.

E. coli is an Enterobacteriaceae that could develop resistance to various antibiotics and become a multi-drug resistant (MDR) bacterium. Options for treating MDR E. coli are limited and the pipeline is somewhat dry when it comes to antibiotics for MDR bacteria, so we aimed to explore more options to help in treating MDR E. coli. The purpose of this study is to examine the synergistic effect of a liposomal formulations of co-encapsulated azithromycin and N-acetylcysteine against E. coli. Liposomal azithromycin (LA) and liposomal azithromycin/N-acetylcysteine (LAN) were compared to free azithromycin. A broth dilution was used to measure the MIC and MBC of both formulations. The biofilm reduction activity, thermal stability measurements, stability studies, and cell toxicity analysis were performed. LA and LAN effectively reduced the MIC of E. coli SA10 strain, to 3 µg/ml and 2.5 µg/ml respectively. LAN at 1 × MIC recorded a 93.22% effectiveness in reducing an E. coli SA10 biofilm. The LA and LAN formulations were also structurally stable to 212 ± 2 °C and 198 ± 3 °C, respectively. In biological conditions, the formulations were largely stable in PBS conditions; however, they illustrated limited stability in sputum and plasma. We conclude that the formulation presented could be a promising therapy for E. coli resistance circumstances, providing the stability conditions have been enhanced.

Validated high-performance liquid chromatographic technique for determination of 5-fluorouracil: applications to stability studies and simulated colonic media.

A simple isocratic stability-indicating high-performance liquid chromatographic method with UV detection using thymine as an internal standard is developed. The method is validated and the degradation products are determined. The method is applied for the assessment of the stability of 5-fluorouracil in rat caecal content as a simulated colon medium under anaerobic conditions. The drug decomposes under acidic, alkaline, thermal, and oxidative stress. The drug is highly susceptible to acidic, alkaline, and oxidative hydrolysis as compared to alkaline conditions. Separation of the drug from major and minor degradation products is successfully achieved on a C(18) analytical, micro-bondapak column. The detection wavelength is 260 nm. The method is validated, and the response is found to be linear in the drug concentration range of 0.1-2.0 microg/mL. The high linearity of the standard calibration curve of 5-fluorouracil in the rat content is found to be R(2) = 0.998 in the concentration range from 0.5 to 5 microg/mL. No degradation occurred after incubation of 5-fluorouracil in the rat caecal contents. The standard deviation and coefficient of variation values for intra- and inter-day precision study exhibit acceptable accuracy and precision data throughout the concentration range investigated.

Preparation and characterization of spironolactone-loaded gelucire microparticles using spray-drying technique.

The basic objectives of this study were to prepare and characterize solid dispersions of poorly soluble drug spironolactone (SP) using gelucire carriers by spray-drying technique. The properties of the microparticles produced were studied by differential scanning calorimetry (DSC), scanning electron microscopy, saturation solubility, encapsulation efficiency, and dissolution studies. The absence of SP peaks in DSC profiles of microparticles suggests the transformation of crystalline SP into an amorphous form. The in vitro dissolution test showed a significant increase in the dissolution rate of microparticles as compared with pure SP and physical mixtures (PMs) of drug with gelucire carriers. Therefore, the dissolution rate of poorly water-soluble drug SP can be significantly enhanced by the preparation of solid dispersion using spray-drying technique.