Modification of the distribution of humic acid complexations by introducing microbubbles to membrane distillation process for effective membrane fouling alleviation.

Membrane fouling caused by inorganic ions and natural organic matters (NOMs) has been a severe issue in membrane distillation. Microbubble aeration (MB) is a promising technology to control membrane fouling. In this study, MB aeration was introduced to alleviate humic acid (HA) composited fouling during the treatment of simulative reverse osmosis concentrate (ROC) by vacuum membrane distillation (VMD). The objective of this work was to explore the HA fouling inhibiting effect by MB aeration and discuss its mechanism from the interfacial point of view. The results showed that VMD was effective for treating ROC, followed by a severe membrane fouling aggravated with the addition of 100 mg/L HA in feed solution, resulting in 45.7% decline of membrane flux. Analysis using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and zeta potential distribution of charged particles proved the coexistence of HA and inorganic cations (especially Ca2+), resulting in more serious membrane fouling. The introduction of MB aeration exhibited excellent alleviating effect on HA-inorganic salt fouling, with the normalized flux increased from 19.7% to 37.0%. The interfacial properties of MBs played an important role, which altered the zeta potential distributions of charged particles in HA solution, indicating that MBs adhere the HA complexations. Furthermore, this mitigating effect was limited at high inorganic cations concentration. Overall, MBs could change the potential characteristics of HA complexes, which also be used for other similar membrane fouling alleviation.

Effects of Alkaline Cleaning on the Conversion and Transformation of Functional Groups on Ion-Exchange Membranes in Polymer-Flooding Wastewater Treatment: Desalination Performance, Fouling Behavior, and Mechanism.

The aging effects of sodium hydroxide (NaOH) on ion-exchange membranes were systematically studied, including the membrane properties, desalination performance, and fouling behaviors. After aging in NaOH solution, there were minor changes in the cation-exchange membrane (CEM) properties; however, functional groups (i.e., quaternary amines) on the anion-exchange membranes (AEMs) were converted into benzylic alcohol, alkene, and tertiary amines, respectively, by nucleophilic substitution, Hofmann elimination, and ylide formation. These degradations rendered decreased ion-exchange capacity (IEC), increased electrical resistance, lost hydrophilicity, and weakened mechanical strength. Moreover, severe deteriorations of desalination performance were observed due to the little ion-exchange ability of the degraded AEMs. The desalination rates were restored after cultivating the aged AEMs in acid solution, mainly because the tertiary amines transformed from the hydroxide form (OH-form) to the ionic chlorine form (Cl-form). The restored desalination rates indicated that the main degradation products were tertiary amines. In addition, the antifouling performance decreased in the order of aged OH-form > aged Cl-form > original AEMs due to the reduction of foulant-membrane intermolecular interactions after aging in NaOH solution. The results contribute to establishing a more comprehensive understanding of the effects of alkaline cleaning on IEMs and provide new insights into cleaning-process optimization and membrane modification.

AKT1 regulates UHRF1 protein stability and promotes the resistance to abiraterone in prostate cancer.

Oncogenic activation of PI3K/AKT signaling pathway, together with epigenetic aberrations are the characters of castration-resistant prostate cancer (CRPC). UHRF1 as a key epigenetic regulator, plays a critical role in prostate cancer (PCa) development, and its expression is positively correlated with the degree of malignancy. In this present study we investigated the potential regulatory mechanism of AKT1 on UHRF1, and further validated the in vitro and in vivo anticancer efficacy of AKT phosphorylation inhibitor MK2206 in combination with abiraterone. Both UHRF1 and p-AKT aberrantly overexpressed in the abiraterone-resistant PCa cells. Further studies revealed that AKT1 protein interacts with UHRF1, and AKT1 directly phosphorylates UHRF1 via the site Thr-210. MK2206 induced UHRF1 protein degradation by inhibiting AKT1-induced UHRF1 phosphorylation, and then reduced the interaction between UHRF1 and deubiquitinase USP7, while promoted the interaction between UHRF1 and E3 ubiquitin protein ligase BTRC. MK2206 significantly promoted the sensitivity of abiraterone-refractory PCa cells and xenografts to abiraterone by decreasing UHRF1 protein level, and reversed the phenotype of NEPC, evently induced cellular senescence and cell apoptosis. Altogether, our present study for the first time revealed a novel molecular mechanism of abiraterone resistance through PI3K/AKT-UHRF1 pathway, and provided a novel therapeutic modality by targeting PI3K/AKT1 to promote the drug sensitivity of abiraterone in PCa patients.

PLK1 maintains DNA methylation and cell viability by regulating phosphorylation-dependent UHRF1 protein stability.

PLK1 is a key serine/threonine kinase as well as a master mitotic regulator, but it has never been reported that PLK1 regulates DNA methylation. In the present study, we for the first time found that PLK1 inhibition disrupted global DNA methylation and elevated the expression level of tumor suppressor genes. Mechanistically, we found that PLK1 interacts UHRF1 protein to induce its phosphorylation at serine 265. Phosphorylation is required for the maintenance of UHRF1 protein stability by recruiting a deubiquitinase USP7. Conversely, PLK1 inhibition decreases UHRF1 protein interaction with USP7 and activates the ubiquitin-proteasome pathway, thereby accelerating UHRF1 protein degradation. UHRF1 degradation decreases the recruitment of DNMT1 to chromatin, and decreases the level of genome-wide DNA methylation, thereby elevating the expression of tumor suppressor genes and decreasing cell viability. We here presented the first report on the novel role of PLK1 in DNA methylation maintenance through UHRF1-DNMT1 pathway, and revealed a novel anticancer mechanism of PLK1 inhibitors.

AR antagonists develop drug resistance through TOMM20 autophagic degradation-promoted transformation to neuroendocrine prostate cancer.

BACKGROUND: Prostate cancer(PCa) is the most commonly occurring male cancer in the USA. Abiraterone or Enzalutamide have been approved for the treatment of metastatic castration-resistant prostate cancer (CRPC). However, the treatment-emergent neuroendocrine PCa (t-NEPC) may develop, resulting in drug resistance in about 10-17% CRPC patients. The detailed mechanisms remain unclear.. METHODS: The expression correlation of TOMM20 and AR in PCa was determined by analyzing publicly available datasets, or by IHC staining in tumor specimens. The protein interaction of TOMM20 and AR was validated by co-immunoprecipitation or GST pull-down assay. The impact of TOMM20 depletion on drug sensitivity were elucidated by assays of cell proliferation, invasion, sphere formation, xenograft growth and intravenous metastasis. The intracellular ROS level was measured by flow cytometry, and the NEPC transdifferentiation and characteristics of cancer stem-like cells were validated by RNA-seq, RT-PCR and western blotting. RESULTS: The protein level of TOMM20 is positively correlated with AR in PCa cells and specimens. TOMM20 protein physically interacts with AR. AR antagonists induced the protein degradation of TOMM20 through autophagy-lysosomal pathway, thereby elevating the intracellular ROS level and activating PI3K/AKT signaling pathway. When TOMM20 was depleted, PCa cells underwent EMT, acquired the characteristics of cancer stem-like cells, and developed resistance to AR antagonists. The stable depletion of TOMM20 promoted the transdifferentiation of PCa adenocarcinoma into NEPC and metastasis. Conversely, the rescue of TOMM20 re-sensitized the resistant PCa cells to AR antagonists. CONCLUSIONS: TOMM20 protein degradation induced by AR antagonists promoted the transdifferentiation of PCa to NEPC, thereby revealing a novel molecular mechanism by which AR antagonists develop drug resistance through mitochondrial outer membrane-mediated signaling pathway. These findings suggested that the decreasing or loss of TOMM20 expression in PCa tissues might become a useful predictor of PCa resistance to AR antagonists.

Microbubble aeration enhances performance of vacuum membrane distillation desalination by alleviating membrane scaling.

Membrane fouling, especially inorganic fouling due to salt crystal formation and deposition on the membrane surface, is still a major technical issue in membrane distillation (MD) applications. In this study, microbubble aeration (MBA) was included in a laboratory-scale vacuum membrane distillation (VMD) rig and its effect on a desalination process was examined. Without MBA, serious membrane scaling occurred during desalination of simulated high-salinity sea water (100 g.L-1 salt concentration), which resulted in a dramatic reduction of permeate flux to essentially zero after 120 min. Scanning electron microscopy showed that a layer of large cuboid salt crystals uniformly covered the membrane surface. However, membrane scaling was mitigated with the introduction of MBA, resulting in the improved VMD desalination performance, which was positively correlated with pump pressure in the microbubble (MB) generator. Results showed that the effective processing time of the VMD desalination processing cycle was respectively prolonged to 150, 180, and more than 300 and 360 min (cf. 120 min without MBA) when the pump pressure was respectively at 0.1, 0.2, 0.3 and 0.4 MPa, leading to the increase of cumulative water production. Further studies found that larger numbers of MBs of smaller size were produced at higher pump pressure, which are more beneficial for increasing water vapor production and alleviating salt precipitation. The difference in zeta potential between the MBs in distilled water (about -30 mV) and that in SW100 solution (about -2 mV) demonstrated that MBA not only effectively mitigated the negative effect of concentration polarization by enhancing the surface shear rate at the membrane surface, but also reduced salt precipitation probably due to the MBs attracting counterions to the gas-water interface. Finally, energy consumption analysis of the modified VMD desalination process revealed that MBA, while itself only adding about 3% to the total energy consumption at varied pump pressures, was able to improve the specific energy consumption, especially at higher pump pressures. Together, these results demonstrate that MBA is an effective way of improving the performance of VMD desalination of water.

Study on the fouling mechanism and cleaning method in the treatment of polymer flooding produced water with ion exchange membranes.

The complex interactions between organic and inorganic foulants in polymer flooding produced water (PFPW) play a significant role in membrane fouling characteristics during the treatment processes with ion-exchange membranes (IEMs). In order to ensure the desalination capacity of IEMs during electrodialysis, this work systematically investigated the fouling mechanism and cleaning properties with different synthetic solutions as feed water. The results demonstrated that the desalination rates of the IEMs decreased by 39.73%, 43.05%, 45.81% and 52.72% when fouled by HPAM, HPAM-inorganic (i.e., CaCl2 and NaHCO3), oil emulsions and oil-HPAM-inorganic, respectively. The results of membrane resistances and SEM images indicated that organic foulant (i.e., HPAM) and inorganic components have a synergistic effect on the fouling of IEMs. The membrane cleaning method using acid-base-sodium dodecyl benzene sulfonate (SDBS) was proposed here to recover the performance of the IEMs after being fouled by feed solution containing oil-HPAM-inorganic compounds. The desalination rate of the IEMs after membrane cleaning increased from 39.62% to 81.39%. This indicated that the acid-base cleaning alone eliminated the inorganic precipitation and gel layer, and the subsequent SDBS cleaning removed the dominant oil emulsion layer.

An overview of advanced reduction processes for bromate removal from drinking water: Reducing agents, activation methods, applications and mechanisms.

Bromate (BrO3-) is a possible human carcinogen regulated at a strict standard of 10µg/L in drinking water. Various techniques to eliminate BrO3- usually fall into three main categories: reducing bromide (Br-) prior to formation of BrO3-, minimizing BrO3- formation during the ozonation process, and removing BrO3- from post-ozonation waters. However, the first two approaches exhibit low degradation efficiency and high treatment cost. The third workaround has obvious advantages, such as high reduction efficiency, more stable performance and easier combination with UV disinfection, and has therefore been widely implemented in water treatment. Recently, advanced reduction processes (ARPs), the photocatalysis of BrO3-, have attracted much attention due to improved performance. To increase the feasibility of photocatalytic systems, the focus of this work concerns new technological developments, followed by a summary of reducing agents, activation methods, operational parameters, and applications. The reaction mechanisms of two typical processes involving UV/sulfite homogeneous photocatalysis and UV/titanium dioxide heterogeneous photocatalysis are further summarized. The future research needs for ARPs to reach full-scale potential in drinking water treatment are suggested accordingly.

Microbial Communities Shaped by Treatment Processes in a Drinking Water Treatment Plant and Their Contribution and Threat to Drinking Water Safety.

Bacteria play an important role in water purification in drinking water treatment systems. On one hand, bacteria present in the untreated water may help in its purification through biodegradation of the contaminants. On the other hand, some bacteria may be human pathogens and pose a threat to consumers. The present study investigated bacterial communities using Illumina MiSeq sequencing of 16S rRNA genes and their functions were predicted using PICRUSt in a treatment system, including the biofilms on sand filters and biological activated carbon (BAC) filters, in 4 months. In addition, quantitative analyses of specific bacterial populations were performed by real-time quantitative polymerase chain reaction (qPCR). The bacterial community composition of post-ozonation effluent, BAC effluent and disinfected water varied with sampling time. However, the bacterial community structures at other treatment steps were relatively stable, despite great variations of source water quality, resulting in stable treatment performance. Illumina MiSeq sequencing illustrated that Proteobacteria was dominant bacterial phylum. Chlorine disinfection significantly influenced the microbial community structure, while other treatment processes were synergetic. Bacterial communities in water and biofilms were distinct, and distinctions of bacterial communities also existed between different biofilms. By contrast, the functional composition of biofilms on different filters were similar. Some functional genes related to pollutant degradation were found widely distributed throughout the treatment processes. The distributions of Mycobacterium spp. and Legionella spp. in water and biofilms were revealed by real-time quantitative polymerase chain reaction (qPCR). Most bacteria, including potential pathogens, could be effectively removed by chlorine disinfection. However, some bacteria presented great resistance to chlorine. qPCRs showed that Mycobacterium spp. could not be effectively removed by chlorine. These resistant bacteria and, especially potential pathogens should receive more attention. Redundancy analysis (RDA) showed that turbidity, ammonia nitrogen and total organic carbon (TOC) exerted significant effects on community profiles. Overall, this study provides insight into variations of microbial communities in the treatment processes and aids the optimization of drinking water treatment plant design and operation for public health.