Laser-Printed All-Carbon Responsive Material and Soft Robot.

Responsive materials and actuators are the basis for the development of various leading-edge technologies but have so far mostly been designed based on polymers, incurring key limitations related to sensitivity and environmental tolerance. This work reports a new responsive material, laser-printed carbon film (LPCF), produced via direct laser transformation of a liquid organic precursor and consists of graphitic and amorphous carbons. The high activity of amorphous carbon combined with the dual-gradient structure enables the LPCF to have a actuation speed of 9400° s-1 in response to the stimulus of organic vapor. LPCF exhibits a conductivity of 950 S m-1 and excellent resistance to various extreme environmental conditions, which are unachievable for polymer-based materials. Additionally, an LPCF-based all-carbon soft robot that can mimic the complex continuous backward somersaulting motions without manual intervention is constructed. The locomotion velocity of the robot reaches a value of 1.19 BL s-1, which is almost one to two orders of magnitude faster than that of reported soft robots. This work not only offers a new paradigm for highly responsive materials but also provides a great design and engineering example for the next generation of biomimetic robots with life-like performance.

Sound Absorption Performance of Ultralight Honeycomb Sandwich Panels Filled with "Network" Fibers-Juncus effusus.

This study investigates lightweight and efficient candidates for sound absorption to address the growing demand for sustainable and eco-friendly materials in noise attenuation. Juncus effusus (JE) is a natural fiber known for its unique three-dimensional network, providing a viable and sustainable filler for enhanced sound absorption in honeycomb panels. Microperforated-panel (MPP) honeycomb absorbers incorporating JE fillers were fabricated and designed, focusing on optimizing the absorber designs by varying JE filler densities, geometrical arrangements, and MPP parameters. At optimal filling densities, the MPP-type honeycomb structures filled with JE fibers achieved high noise reduction coefficients (NRC) of 0.5 and 0.7 at 20 mm and 50 mm thicknesses, respectively. Using an analytical model and an artificial neural network (ANN) model, the sound absorption characteristics of these absorbers were successfully predicted. This study demonstrates the potential of JE fibers in improving noise mitigation strategies across different industries, offering more sustainable and efficient solutions for construction and transportation.

Multifunctional bioactive glasses with spontaneous degradation for simultaneous osteosarcoma therapy and bone regeneration.

For the treatment of tumor-related bone defects resulting from surgical resection, simultaneous eradication of residual tumor cells and repair of bone defects represent a challenge. To date, photothermal therapy based on photothermal materials is used to remove residual tumor cells under near infrared light. However, most of photothermal materials have no function for bone repair, and even if combined with bioactive materials to enhance osteogenesis, they still cause potential harm to the body due to inability to degrade or poor degradability. Herein, multifunctional bioactive glasses (PGFe5-1100, PGCu5-1100) based on phosphate glass doped with transition metal elements were prepared for photothermal ablation, bone regeneration, and controllable degradation. The glasses exhibited excellent photothermal effect, which was derived from the electron in-band transition after light absorption due to energy level splitting of doped transition metal element and the subsequent electron nonradiative relaxation. The photothermal performance can be controlled by laser power density, element doping content and glass melting temperature. Moreover, the hyperthermia induced by the glasses can effectively kill tumor cells in vitro. In addition, the glasses degraded over time, and the released P, Ca, Na, Fe could promote bone cell proliferation and osteogenic differentiation. Therefore, these results successfully demonstrated that transition metal element-doped phosphate glasses have multifunctional abilities of tumor elimination, bone regeneration, and spontaneous degradation simultaneously with better biosecurity and bioactivity, which is believed to pave the way for the design of novel biomaterials for osteosarcoma treatment.

Preparation and Application of a Multifunctional Interfacial Modifier for Ramie Fiber/Epoxy Resin Composites.

A multi-functional modifier, which could improve the mechanical and thermal performance simultaneously, is significant in composites production. Herein, inspired by the chemistry of mussel, an interfacial modifier named FPD was designed and synthesized through one simple step, which was attached by three functional groups (including catechol, N-H bond, and DOPO). Due to the innate properties of each functional group, FPD played multiple roles: adhere to the ramie fibers from catechol and cure with the epoxy resin from -NH-, an antiflaming property from DOPO, and the compatibilizer between ramie fibers and epoxy resin was also improved by changing the polarity of ramie fiber. All of the above functions can be proved by means of water contact angle (WCA), atomic force microscope (AFM), and scanning electron microscopy (SEM), etc. After solidification, the ramie fiber/epoxy composites demonstrated superior performances in terms of good mechanical properties and excellent flame retardant property. With the addition of 30 wt.% FPD, the tensile strength and modulus of the ramie/epoxy composite showed an improvement of 37.1% and 60.9%, and flexural strength and modulus of the composite were improved by 8.9% and 19.3% comparing with no addition composite. Moreover, the composite could achieve the goal for V-0 rating in the UL-94 test and LOI value was 34.6% when the addition of FPD reached 30 wt.%. This work provided us with an efficient method for fabricating nature fiber/epoxy composites with good properties.

Super toughened blends of poly(lactic acid) and poly(butylene adipate-co-terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure.

Biodegradable poly(lactic acid) (PLA) foams have drawn increasing attention due to environmental challenges and petroleum crisis. However, it still remains a challenge to prepare PLA foams with fine cellular structures and high impact property, which significantly hinders its widespread application. Herein, phase interface-enhanced PLA/ poly(butylene adipate-co-terephthalate) (PBAT) blend foam, modified by a reactive compatibilizer through a simple reactive extrusion, was produced via a core-back foam injection molding technique. The obtained PLA blend foams displayed an impact strength as high as 49.1 kJ/m2, which was 9.3 and 6.4 times that of the unmodified PLA/PBAT blend and its corresponding foam, respectively. It proved that the interfacial adhesion and cell size both strongly affected the impact strength of injection-molded PLA/PBAT foams, and two major conclusions were proposed. First, enhancing interfacial adhesion could cause a brittle-tough transition of PLA/PBAT foams. Additionally, for foams with high interfacial adhesion, small cell size (<12 µm) was more favorable for the stretching of cells and extension of the whitened region in comparison with big cell size (cell size >60 µm), leading to the drastic toughening of PLA blends. This study provides a feasible, industrially scalable and practical strategy to prepare super toughened and fully biodegradable PLA materials.

Effects of the Interlayer Toughening Agent Structure on the Flow Behavior during the z-RTM Process.

In this paper, interlayer toughening composites were prepared by the z-directional injection RTM process (z-RTM), which has the advantage of increasing the interlaminar toughness and shortening the filling time and completely impregnating the fibers. The nonwoven fabrics and dot matrix structure material were used as ex situ interlayer toughening agents. The effect of the interlayer toughening agent structure on the resin flow behavior during the z-RTM process was investigated. The macro-flowing and micro-infiltration behaviors of the resin inside the preforms were deduced. The permeability of the fabric preforms with different toughening agents was investigated. The results show that the introduction of the nonwoven structure toughening agent makes the macro flow slow, and the flow front more uniform. The toughening agent with a dot matrix structure promotes the resin macro flow in the preforms, and shortens the injection time. The z-directional permeability of the preform with a dot matrix structural toughening agent is one order of magnitude lower than that of the non-toughened preform, while being higher than the preform toughened by the nonwoven fabric preforms, which is helpful for the further applicability of the z-RTM process. Furthermore, the mode II interlaminar fracture toughness of composites was evaluated.

Investigation of High-Temperature Normal Infrared Spectral Emissivity of ZrO2 Thermal Barrier Coating Artefacts by the Modified Integrated Blackbody Method.

Zirconium oxide (ZrO2) is widely used as the thermal barrier coating in turbines and engines. Accurate emissivity measurement of ZrO2 coating at high temperatures, especially above 1000 °C, plays a vital role in thermal modelling and radiation thermometry. However, it is an extremely challenging enterprise, and very few high temperature emissivity results with rigorously estimated uncertainties have been published to date. The key issue for accurately measuring the high temperature emissivity is maintaining a hot surface without reflection from the hot environment, and avoiding passive or active oxidation of material, which will modify the emissivity. In this paper, a novel modified integrated blackbody method is reported to measure the high temperature normal spectral emissivity of ZrO2 coating in the temperature range 1000 °C to 1200 °C and spectral range 8 µm to 14 µm. The results and the associated uncertainty of the measurement were estimated and a relative standard uncertainty better than 7% (k = 2) is achieved.

High-strength composite fibers: realizing true potential of carbon nanotubes in polymer matrix through continuous reticulate architecture and molecular level couplings.

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory fails to explain the overall hybrid behavior at nanoscale.

Friction and mechanical properties of amino-treated graphene-filled epoxy composites: modification conditions and filler content.

It remains a challenge for graphene to reach its full potential as a lubricant and wear-resistant material in thermosetting resin composites. In this study, the mechanical properties and friction properties of amino-treated graphene-filled epoxy composites, which were influenced by the conditions for the modification of graphene and filler content, were investigated. The mechanical properties were measured by tensile examination and the tribological properties were determined using a ball-on-disk tribometer. The results showed that the composite filled with amino-treated graphene for a short reaction time exhibited the best tribological behavior, where the friction coefficient was 57.9% lower than that of the pure resin and the wear rate was 92.2% less than that of the neat resin. Simultaneously, this amino-treated graphene also resulted in enhanced mechanical properties and T g in the nanocomposite, implying its good crosslinking network and strong interface strength. The wear track analysis demonstrated that the excellent wear resistance was induced by its improved toughness, which restrained the crack propagation of fatigue wear and decreased the size of debris, promoting the formation of a transfer film, and thus protecting the contact surface. The tribological properties also varied with the concentration of the nanofiller, which showed the best performance at 0.2 wt%. Through the optimization of the modification conditions and concentration, this work highlights a promising strategy for the application of graphene-related materials in the field of tribology.

A one-step mild acid route to fabricate high performance porous anti-reflective optical films from cationic polymeric nanolatex.

Porous silica anti-reflection (AR) films are of importance in solar cells' photon harvest. However, the usual utilized method to fabricate AR films is the two-step method since the formation of porous silica NPs (first step) and silica coating sol (second step) always require chemical systems at distinct pH values. To reduce the complexity of the process, we choose cationic emulsion as an approach to produce the porosity and propose a convenient one-step route to get high-performance antireflective films. A single layer SiO2 anti-reflective (AR) film with high optical transmittance up to 97.5% at 740 nm was fabricated from composite sol that was made from cationic emulsion nanolatex and tetraethylorthosilicate under acid catalysis condition. After calcination, the transmittance of AR coated glasses still held the transmittance of 96% at 550 nm. Composited with SiO2, Al2O3, or TiO2 sol binders, the transmittance of AR coated glasses could be recovered as high as 97.9% at 650 nm and the pencil hardness was further strengthened up to 6H. The composite sol can keep stable at least one month at ambient temperature without any visible precipitation. Therefore, the proposed method is promising for developing high-performance AR films effectively and economically.

The past and future of USTC: an interview with USTC President Xinhe Bao.

The University of Science and Technology of China (USTC) is located in Hefei, the capital of Anhui province, and has its own characteristics among the universities in China. Established by the Chinese Academy of Sciences (CAS), USTC is distinctively tinted with a scientific color. It is also famous for its 'Special Class for the Gifted Young' and is considered one of the best Chinese universities in the fields of science and technology (S&T). Recently, National Science Review interviewed Professor Xinhe Bao, the President of USTC, about the characteristics of the university and the education and research in China. Xinhe Bao is an academician of CAS and has made seminal contributions in catalysis and energy chemistry in the past decades. Before joining USTC, he had worked at Dalian Institute of Chemical Physics (DICP), CAS and Fudan University (Shanghai), and thus possesses an in-depth understanding of the education and research in China.

Long-term stably dispersed functionalized graphene oxide as an oil additive.

In oil lubrication systems, it is essential to continuously supply lubricant to the contact surface during practical applications. Herein, to realize its long-term stable dispersion in oil, graphene oxide was modified with polyisobutylene succinimide (PIBS, trade name T154), which is an effective dispersant for lubricating oils. Characterization of the T154-modified graphene oxide (GO-T154) by FTIR, XPS, and XRD revealed that the surface of the graphene platelets was covered by the T154 chains, and the dimensions of the graphene platelets had obviously decreased. The dispersion study demonstrated the long-term stability of a GO-T154/oil suspension, which could stand for more than a year without any significant precipitation. The lubricating property was greatly improved by the addition of GO-T154; more specifically, for the optimal performance, the friction coefficient decreased by 54%, and the wear rate decreased by 60%. Micro observation of the worn surfaces indicated that well-dispersed GO-T154 could enter the gap between the friction surfaces, forming a transfer film to separate the rubbing surface. With the long-term stability, high thermal stability and outstanding tribological properties of the suspension, GO-T154 promises to realize practical applications of graphene in lubricating oil.

Composition, Structure and Morphology Evolution of Octadecylamine (ODA)⁻Reduced Graphene Oxide and Its Dispersion Stability under Different Reaction Conditions.

Octadecylamine (ODA) can solve the aggregation problem of graphene sheets in the chemical exfoliation method. However, no attempts have been made to investigate the evolution of ODA⁻reduced graphene oxide (ORGO) with reaction conditions and the modification mechanism, which is the core problem to realize the controllable production and practical application of graphene. In this study, we treated graphene oxide (GO) with ODA under different reaction conditions to prepare ORGO. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy, atomic force microscopy, Raman spectroscopy, thermogravimetric analysis (TGA), and UV⁻vis spectrophotometry were employed to analyze the composition, structure, morphology and characteristics of the as⁻prepared graphene sheets. The results showed that the reduction reaction could occur under mild conditions, but the edge grafting reaction could only be activated by a higher temperature. Moreover, the ORGO created at 80 °C for 5 h and 120 °C for 0.5 h exhibited the optimized properties, both excellent dispersing stability and high heat resisting property, since they had more edge grafting chains and a suitable reduction degree.