Genome-wide association study and genomic prediction for yield and grain quality traits of hybrid rice.

Genomic selection is an efficient tool for breeding selection, especially for quantitative traits controlled by multiples genes with low heritability. To validate the application of genomic selection in hybrid rice breeding, the yield and grain quality traits of 404 hybrid rice breeding lines were investigated, and the same accessions were genotyped by using a 56 K SNP chip. There were wide variances among the tested accessions for all the measured traits, and most of the traits were correlated. A total of 67 significant loci were identified for the yield-related traits, and 123 significant loci were identified for the grain quality traits by GWAS. Two of these loci associated with increasing grain yield but decreasing grain quality. The GEBVs of all the yield and grain quality traits were calculated by using 15 different prediction algorithms. The plant height, panicle length, thousand grain weight, grain length and width ratio, amylose content, and alkali value have higher predictability than other traits. However, the predictive accuracy of different GS models is different for different traits. This study provided useful information for genomic selection of specific trait using proper markers and prediction models. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-022-01289-6.

Magnetic solid-phase extraction based on a polydopamine-coated Fe3 O4 nanoparticles absorbent for the determination of bisphenol A, tetrabromobisphenol A, 2,4,6-tribromophenol, and (S)-1,1'-bi-2-naphthol in environmental waters by HPLC.

Polydopamine-coated Fe3 O4 magnetic nanoparticles synthesized through a facile solvothermal reaction and the self-polymerization of dopamine have been employed as a magnetic solid-phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)-1,1'-bi-2-naphthol and 2,4,6-tribromophenol, from environmental waters followed by high-performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine-coated Fe3 O4 sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0-112.0% with relative standard deviations of 0.8-7.7%, indicating the good reliability of the magnetic solid-phase extraction with high-performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine-coated Fe3 O4 nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π-π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine-coated Fe3 O4 in water, among which hydrophobic interaction dominates the magnetic solid-phase extraction performance.

Magnetic solid-phase extraction of brominated flame retardants from environmental waters with graphene-doped Fe3O4 nanocomposites.

Graphene-doped Fe3O4 nanocomposites were prepared by a solvothermal reaction of an iron source with graphene. The nanocomposites were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, superconducting quantum interference, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. This nanomaterial has been used as a magnetic solid-phase extraction sorbent to extract trace brominated flame retardants from environmental waters. Various extraction parameters were optimized including dosage and reusability of the nanocomposites, and pH of sample matrix. The reliability of the magnetic solid-phase extraction protocol based on graphene-doped Fe3O4 nanocomposites was evaluated by investigating the recoveries of 2,4,6-tribromophenol, tetrabromobisphenol A, 4-bromodiphenyl ether, and 4,4'-dibromodiphenyl ether in water samples. Good recoveries (85.0-105.0%) were achieved with the relative standard deviation ranging from 1.1-7.1%. Moreover, it is speculated from characterization and magnetic solid-phase extraction experiment that there is not only π-π stacking but also possible hydrophobic interaction between the graphene-doped Fe3O4 nanocomposites and analytes.

Structures and Materials in Stretchable Electroluminescent Devices.

Stretchable electroluminescent (EL) devices are obtained by partitioning a large emission area into areas specifically for stretching and light-emission (island-bridge structure). Buckled and textile structures are also shown effective to combine the conventional light emitting diode fabrication with elastic substrates for structure-enabled stretchable EL devices. Meanwhile, intrinsically stretchable EL devices which are characterized with uniform stretchability down to microscopic scale are relatively less developed but promise simpler device structure and higher impact resistance. The challenges in fabricating intrinsically stretchable EL devices with high and robust performance are in many facets, including stretchable conductors, emissive materials, and compatible processes. For the stretchable transparent electrode, ionically conductive gel, conductive polymer coating, and conductor network in surface of elastomer are all proven useful. The stretchable EL materials are currently limited to conjugated polymers, conjugated polymers with surfactants and ionic conductors added to boost stretchability, and phosphor particles embedded in elastomer matrices. These emissive materials operate under different mechanisms, require different electrode materials and fabrication processes, and the corresponding EL devices face distinctive challenges. This review aims to provide a basic understanding of the materials meeting both the mechanical and electronic requirements and important techniques to fabricate the stretchable EL devices.

Genomics-Assisted Improvement of Super High-Yield Hybrid Rice Variety "Super 1000" for Resistance to Bacterial Blight and Blast Diseases.

The two-line rice hybrid "Super 1000" (GX24S × R900) represents a major landmark achievement of breeding for super-hybrid rice in China. However, both male parent R900 and hybrid "Super 1000" have an obvious defect of high susceptibility to rice bacterial blight (BB) and blast. Thus, improving disease resistance and maintaining the original high-yield capacity are essential for the sustainable application of "Super 1000." In this study, the application of closely linked single-nucleotide polymorphism (SNP) markers for foreground selection of dominant resistance gene loci together with genome-wide SNP markers for the background selection rapidly improved the disease resistance of R900 without disturbing its high-yield capacity. A series of improved R900 lines (iR900, in BC2Fn and BC3Fn generations) were developed to stack resistance genes (Xa23+Pi9, Xa23+Pi1+Pi2/9) by marker-assisted backcrossing and field selection for phenotypes, and further crossed with the female line GX24S to obtain improved hybrid variety Super 1000 (iS1000). The genetic backgrounds of iS1000 and "Super 1000" were profiled by using a 56 K SNP-Chip, and results showed that they shared 98.76% of similarity. Meanwhile, evaluation of the field disease resistance showed that the iR900 lines and iS1000 hybrids possess significantly enhanced resistance to both BB and rice blast. Resistance spectrum assays revealed that the iR900 lines and their derived hybrids exhibited high-level resistance to 28 Xoo strains tested, and enhanced resistance to leaf blast at the seedling stage when infected with 38 Magnaporthe oryzae isolates. Between 2019 and 2020, the multi-location field trials across the middle and lower reaches of the Yangtze River were launched and showed that the iS1000 slightly out-yielded than the original variety. In a large-scale demonstration site (6.73 ha, Yunnan, China), the iS1000 achieved 17.06 t/hm2 of yield in 2019. Moreover, the high similarity was observed in main agronomic traits and grain quality when comparing the improved lines/hybrids to original ones (iR900 vs. R900, iS1000 vs. S1000). This work presented a typical genomics-assisted breeding strategy and practice, which involves in directional introgression and rapid stack of multiple disease resistance genes, endowing the super-high-yield hybrid rice variety with holistic disease resistance but without yield penalty.

Soft strain-insensitive bioelectronics featuring brittle materials.

Advancing electronics to interact with tissue necessitates meeting material constraints in electrochemical, electrical, and mechanical domains simultaneously. Clinical bioelectrodes with established electrochemical functionalities are rigid and mechanically mismatched with tissue. Whereas conductive materials with tissue-like softness and stretchability are demonstrated, when applied to electrochemically probe tissue, their performance is distorted by strain and corrosion. We devise a layered architectural composite design that couples strain-induced cracked films with a strain-isolated out-of-plane conductive pathway and in-plane nanowire networks to eliminate strain effects on device electrochemical performance. Accordingly, we developed a library of stretchable, highly conductive, and strain-insensitive bioelectrodes featuring clinically established brittle interfacial materials (iridium-oxide, gold, platinum, and carbon). We paired these bioelectrodes with different electrochemical probing methods (amperometry, voltammetry, and potentiometry) and demonstrated strain-insensitive sensing of multiple biomarkers and in vivo neuromodulation.

In situ direct growth of single crystalline metal (Co, Ni) selenium nanosheets on metal fibers as counter electrodes toward low-cost, high-performance fiber-shaped dye-sensitized solar cells.

Highly crystalline metal (Co, Ni) selenium (Co0.85Se or Ni0.85Se) nanosheets were in situ grown on metal (Co, Ni) fibers (M-M0.85Se). Both M-M0.85Se (Co-Co0.85Se and Ni-Ni0.85Se) fibers prove to function as excellent, low-cost counter electrodes (CEs) in fiber-shaped dye-sensitized solar cells (FDSSCs) with high power conversion efficiency (Co-Co0.85Se 6.55% and Ni-Ni0.85Se 7.07%), comparable or even superior to a Pt fiber CE (6.54%). The good performance of the present Pt-free CE-based solar cell was believed to originate from: (1) the intrinsic electrocatalytic properties of the single-crystalline M-M0.85Se; (2) the enough void space among M0.85Se nanosheets that allows easier redox ion diffusion; (3) the two-dimensional morphology that provides a large contact area between the CE catalytic material and electrolyte; (4) in situ direct growth of the M0.85Se on metal fibers that renders good electrical contact between the active material and the electron collector.