Anomalous Hall Transport by Optically Injected Isospin Degree of Freedom in Dirac Semimetal Thin Film.

Chirality of massless fermions emerging in condensed matter is a key to understand their characteristic behavior as well as to exploit their functionality. However, the chiral nature of massless fermions in Dirac semimetals has remained elusive, due to equivalent occupation of carriers with the opposite chirality in thermal equilibrium. Here, we show that the isospin degree of freedom, which labels the chirality of massless carriers from a crystallographic point of view, can be injected by circularly polarized light. Terahertz Faraday rotation spectroscopy successfully detects the anomalous Hall conductivity by a light-induced isospin polarization in a three-dimensional Dirac semimetal, Cd3As2. Spectral analysis of the Hall conductivity reveals a long scattering time and a long decay time, which are characteristic of the isospin. The long-lived, robust, and reversible character of the isospin promises a potential application of Dirac semimetals in future information technology.

Observation of Terahertz Spin Hall Conductivity Spectrum in GaAs with Optical Spin Injection.

We report the first observation of the spin Hall conductivity spectrum in GaAs at room temperature. Our terahertz polarimetry with a precision of several µrads resolves the Faraday rotation of terahertz pulses arising from the inverse spin Hall effect of optically injected spin-polarized electrons. The obtained spin Hall conductivity spectrum exhibits an excellent quantitative agreement with theory, demonstrating a crossover in the dominant origin from impurity scattering in the dc regime to the intrinsic Berry-curvature mechanism in the terahertz regime. Our spectroscopic technique opens a new pathway to analyze anomalous transports related to spin, valley, or orbital degrees of freedom.

Low-temperature dissociation of CO2 molecules on vicinal Cu surfaces.

The reaction of carbon dioxide on the vicinal Cu surfaces at low temperatures was investigated by infrared reflection absorption spectroscopy, scanning tunneling microscopy, X-ray photoelectron spectroscopy, and quadrupole mass spectrometry. Dissociation of CO2 molecules into CO on the Cu(997) and Cu(977) surfaces was observed at temperatures between 80 K and 90 K, whereas it did not occur on Cu(111) under a similar condition. CO and physisorbed CO2 were the main adsorbates during the reaction. In contrast, the amount of atomic oxygen on the surface was small. The dissociation of CO2 was promoted by the small amount of oxygen produced by the CO2 dissociation on the Cu surfaces. This leads to the induction period in the CO2 reaction; the initial reaction rate on the clean Cu surfaces was low, and the coadsorbed oxygen enhanced the dissociation reactivity of CO2. Mass analysis of desorption species during the reaction revealed that the observed CO formation on the vicinal Cu surface is mainly caused by an oxygen-exchange reaction with residual CO in an ultra-high vacuum chamber.

Carbon Nitride Loaded with an Ultrafine, Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction.

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO3 and BaLa4 Ti4 O15 .

Disentangling the Competing Mechanisms of Light-Induced Anomalous Hall Conductivity in Three-Dimensional Dirac Semimetal.

We experimentally elucidate the origin of the anomalous Hall conductivity in a three-dimensional Dirac semimetal, Cd_{3}As_{2}, driven by circularly polarized light. Using time-resolved terahertz Faraday rotation spectroscopy, we determine the transient Hall conductivity spectrum with special attention to its sign. Our results clearly show the dominance of direct photocurrent generation assisted by the terahertz electric field. The contribution from the Floquet-Weyl nodes is found to be minor when the driving light is in resonance with interband transitions. We develop a generally applicable classification of microscopic mechanisms of light-induced anomalous Hall conductivity.

Hydrogen-induced Sulfur Vacancies on the MoS2 Basal Plane Studied by Ambient Pressure XPS and DFT Calculations.

Sulfur vacancy on an MoS2 basal plane plays a crucial role in device performance and catalytic activity; thus, an understanding of the electronic states of sulfur vacancies is still an important issue. We investigate the electronic states on an MoS2 basal plane by ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory calculations while heating the system in hydrogen. The AP-XPS results show a decrease in the intensity ratio of S 2p to Mo 3d, indicating that sulfur vacancies are formed. Furthermore, low-energy components are observed in Mo 3d and S 2p spectra. To understand the changes in the electronic states induced by sulfur vacancy formation at the atomic scale, we calculate the core-level binding energies for the model vacancy surfaces. The calculated shifts for Mo 3d and S 2p with the formation of sulfur vacancy are consistent with the experimentally observed binding energy shifts. Mulliken charge analysis indicates that this is caused by an increase in the electronic density associated with the Mo and S atoms around the sulfur vacancy as compared to the pristine surface. The present investigation provides a guideline for sulfur vacancy engineering.

Tracking Ultrafast Change of Multiterahertz Broadband Response Functions in a Photoexcited Dirac Semimetal Cd3As2 Thin Film.

The electromagnetic response of Dirac semimetals in the infrared and terahertz frequency ranges is attracting growing interest for potential applications in optoelectronics and nonlinear optics. The interplay between the free-carrier response and interband transitions in the gapless, linear dispersion relation plays a key role in enabling novel functionalities. Here we investigate ultrafast dynamics in thin films of a photoexcited Dirac semimetal Cd3As2 by probing the broadband response functions as complex quantities in the multiterahertz region (10-45 THz, 40-180 meV, or 7-30 µm), which covers the crossover between the inter- and intraband response. We resolve dynamics of the photoexcited nonthermal electrons, which merge with originally existing carriers to form a single thermalized electron gas and how it is facilitated by high-density excitation. We also demonstrate that a large reduction of the refractive index by 80% dominates the nonequilibrium infrared response, which can be utilized for designing ultrafast switches in active optoelectronics.

Stimulated Rayleigh Scattering Enhanced by a Longitudinal Plasma Mode in a Periodically Driven Dirac Semimetal Cd_{3}As_{2}.

Using broadband (12-45 THz) multi-terahertz spectroscopy, we show that stimulated Rayleigh scattering dominates the transient optical conductivity of cadmium arsenide, a Dirac semimetal, under an optical driving field at 30 THz. The characteristic dispersive line shape with net optical gain is accounted for by optical transitions between light-induced Floquet subbands, strikingly enhanced by the longitudinal plasma mode. Stimulated Rayleigh scattering with an unprecedentedly large refractive index change may pave the way for slow light generation in conductive solids at room temperature.

Substrate-Selective Intermolecular Interaction and the Molecular Self-Assemblies: 1,3,5-Tris(4-bromophenyl)benzene Molecules on the Ag(111) and Si(111) (√3 × âˆš3)-Ag Surfaces.

We report the formation processes of the self-assembled layer of 1,3,5-tris(4-bromophenyl)benzene (TBB) molecules on the Ag(111) and Si(111) (√3 × âˆš3)-Ag surfaces by STM measurements and density functional theory (DFT) calculations. The self-assembled layers on the surfaces show characteristic structures controlled by the interplay between the intermolecular interaction and the molecule-substrate interaction. Through the cooperative interplay between the molecule-substrate interaction and the intermolecular halogen bond (XB), the periodic arrangement of TBB molecules appears on the Ag(111) surface. On the other hand, the two types of TBB arrangement appear on the Si(111) (√3 × âˆš3)-Ag surface (phases 1 and 2). Phase 1 is the periodic arrangement of the TBB molecules and is derived from the cooperative interplay between the molecule-substrate interaction and the intermolecular van der Waals (vdW) interaction and the hydrogen bond (HB), and phase 2 is a random arrangement and is derived from the competitive interplay between the molecule-substrate interaction and the intermolecular XB and HB. Our present study specifies the role of the substrate in the molecular self-assembly of the substrate. Although the structure of the molecular self-assembly is controlled by the choice of the substrate, the cooperative interplay between the molecule-substrate interaction and the intermolecular interaction is necessary to realize the ideal periodic arrangement.

Elucidation of the atomic-scale processes of dissociative adsorption and spillover of hydrogen on the single atom alloy catalyst Pd/Cu(111).

Hydrogen spillover is a crucial process in the selective hydrogenation reactions on Pd/Cu single atom alloy catalysts. In this study, we report the atomic-scale perspective of these processes on the single atom alloy catalyst Pd/Cu(111) based on the experimental and theoretical results, including infrared reflection absorption spectroscopy (IRAS), temperature programmed desorption (TPD), high-resolution X-ray photoelectron spectroscopy (HR-XPS), and density functional theory (DFT) calculations for core-level excitation. The hydrogen spillover onto Cu(111) was successfully observed in real time using time-resolved IRAS measurements at 80 K. The chemical shifts of Pd 3d5/2 indicate that H2 is dissociated and adsorbed at the Pd site. In addition, a "two-step" chemical shift of the Pd 3d5/2 binding energy was observed, indicating two types of hydrogen adsorption states at the Pd site. The proposed mechanism of the hydrogen dissociation and spillover processes is as follows: (i) a hydrogen molecule is dissociated at a Pd site, and the hydrogen atoms are adsorbed on the Pd site; (ii) the number of hydrogen atoms on the Pd site increases up to three; and (iii) the hydrogen atoms will spill over onto the Cu surface.

Role of Intermolecular Interactions in the Catalytic Reaction of Formic Acid on Cu(111).

Formic acid (HCOOH) can be catalytically decomposed into H2 and CO2 and is a promising hydrogen storage material. As H2 production catalysts, Cu surfaces allow selective HCOOH decarboxylation; however, the on-surface HCOOH decomposition reaction pathway remains controversial. In this study, the temperature dependence of the HCOOH/Cu(111) adsorption structures is elucidated by scanning tunneling microscopy and non-contact atomic force microscopy, establishing the adsorbate chemical species using density functional theory. 2D HCOOH islands at 80 K, linear chains of HCOOH and monodentate formate at 150 K, chain-like assemblies of monodentate and bidentate formate at 200 K, and bidentate formate clusters at 300 K are observed. At each temperature, the adsorbates experience attractive interactions among themselves. Such aggregation stabilizes them against desorption and decomposition. Thus, accurate evaluation of intermolecular interactions is essential to understand catalytic reactivity.

The roles of step-site and zinc in surface chemistry of formic acid on clean and Zn-modified Cu(111) and Cu(997) surfaces studied by HR-XPS, TPD, and IRAS.

The adsorption, desorption, and decomposition of formic acid (HCOOH) on Cu(111), Cu(997), Zn-Cu(111), and Zn-Cu(997) were systematically studied by high-resolution x-ray photoelectron spectroscopy, temperature programmed desorption, and infrared reflection absorption spectroscopy. On the clean Cu(111) surface, 13% of formic acid molecules adsorbed at 83 K were dissociated to form bidentate formate species by heating at 300 K; however, on the Zn-Cu(111) surface, only 4% of adsorbed HCOOH molecules were dissociated into the bidentate formate species. On the contrary, 13% of adsorbed HCOOH molecules were already dissociated into monodentate formate species on Cu(997) even at 83 K and 17% of adsorbed formic acid molecules were transformed to bidentate formate species by heating at 300 K, indicating that the stepped Cu surface has higher reactivity for HCOOH dissociation at low temperature. On the Zn-Cu(997) surface, 20% of formic acid became bidentate formate species in contrast to the case with Zn-Cu(111). Thus, the Zn deposited Cu step surface shows special activity for adsorption and dissociation of formic acid. The desorption peak maxima of the formate decomposition products (CO2 and H2) on Zn-Cu(997) were shifted to higher temperatures than those on Cu(997). Zn on Cu surfaces plays an important role in the stabilization of formate species, which probably leads to the decrease in the activation barrier for hydrogenation on the Zn-Cu alloyed surface.

Formation of BN-covered silicene on ZrB2/Si(111) by adsorption of NO and thermal processes.

We have investigated the adsorption and thermal reaction processes of NO with silicene spontaneously formed on the ZrB2/Si(111) substrate using synchrotron radiation x-ray photoelectron spectroscopy (XPS) and density-functional theory calculations. NO is dissociatively adsorbed on the silicene surface at 300 K. An atomic nitrogen is bonded to three Si atoms most probably by a substitutional adsorption with a Si atom of silicene (N≡Si3). An atomic oxygen is inserted between two Si atoms of the silicene (Si-O-Si). With increasing NO exposure, the two-dimensional honeycomb silicene structure gets destroyed, judging from the decay of typical Si 2p spectra for silicene. After a large amount of NO exposure, the oxidation state of Si becomes Si4+ predominantly, and the intensity of the XPS peaks of the ZrB2 substrate decreases, indicating that complicated silicon oxinitride species have developed three-dimensionally. By heating above 900 K, the oxide species start to desorb from the surface, but nitrogen-bonded species still exist. After flashing at 1053 K, no oxygen species is observed on the surface; SiN species are temporally formed as a metastable species and BN species also start to develop. In addition, the silicene structure is restored on the ZrB2/Si(111) substrate. After prolonged heating at 1053 K, most of nitrogen atoms are bonded to B atoms to form a BN layer at the topmost surface. Thus, BN-covered silicene is formed on the ZrB2/Si(111) substrate by the adsorption of NO at 300 K and prolonged heating at 1053 K.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts.

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr0.19Rh0.06CeOz) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O2 at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr0.19Rh0.06CeOz: dispersed Rh3+δ species (<1 nm) and Cr6-γO3-x nanoparticles (∼1 nm) supported on CeO2 in Cr0.19Rh0.06CeOz were transformed to Rh nanoclusters, Cr(OH)3 species and CeO2-x with two Ce3+-oxide layers at the surface in a concerted activation manner of the three metal species with H2.

Intra-dimer row and inter-dimer row coupling of the vibrational modes of chemisorbed CO on Si(001)-c(4×2) observed by angle-dependent transmission infrared spectroscopy.

The vibrational modes of chemisorbed CO on a Si(001) surface are investigated by means of transmission Fourier-transform infrared absorption spectroscopy. We observed the three components corresponding to the stretching vibration of the terminal-site CO adsorbed on the down-dimer sites of a Si(001) surface. The symmetric stretching vibration and asymmetric stretching vibration are observed separately. This assignment is consistent with the polarization dependence of the incident light and with the vibrational modes obtained by performing theoretical calculations. We found that both the intradimer row and interdimer row coupling should be considered to explain the appearance of the three components.

An Ethynylene-Bridged Pentacene Dimer: Two-Step Synthesis and Charge-Transport Properties.

A rigid and planar ethynylene-bridged pentacene dimer (PenD) was synthesized from pentacenequinone in two steps, skipping the conventional stepwise approach. A brickwork motif in the single crystal shows two-dimensionally extended electronic interaction in the solid state. Highly crystalline dip-coated films exhibited average hole mobility of 0.24 cm2 V-1 s-1 , comparable to that of the single-crystal organic field-effect transistors. This discovery and understanding of the reaction for the facile synthesis of ethynylene-bridged π-conjugated systems enables to the synthesis of a wide range of organic semiconducting materials.

Strong Hydrogen Bonds at the Interface between Proton-Donating and -Accepting Self-Assembled Monolayers on Au(111).

Hydrogen-bonding heterogeneous bilayers on substrates have been studied as a base for new functions of molecular adlayers by means of atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), infrared reflection absorption spectroscopy (IRAS), and density functional theory (DFT) calculations. Here, we report the formation of the catechol-fused bis(methylthio)tetrathiafulvalene (H2Cat-BMT-TTF) adlayer hydrogen bonding with an imidazole-terminated alkanethiolate self-assembled monolayer (Im-SAM) on Au(111). The heterogeneous bilayer is realized by sequential two-step immersions in solutions for the individual Im-SAM and H2Cat-BMT-TTF adlayer formations. In the measurements by AFM, a grained H2Cat-BMT-TTF adlayer on Im-SAM is revealed. The coverage and the chemical states of H2Cat-BMT-TTF on Im-SAM are specified by XPS. On the vibrational spectrum measured by IRAS, the strong hydrogen bonds between H2Cat-BMT-TTF and Im-SAM are characterized by the remarkably red-shifted OH stretching mode at 3140 cm-1, which is much lower than that for hydrogen-bonding water (typically ∼3300 cm-1). The OH stretching mode frequency and the adsorption strength for the H2Cat-BMT-TTF molecule hydrogen bonding with imidazole groups are quantitatively examined on the basis of DFT calculations.

Enhancement of CO2 adsorption on oxygen-functionalized epitaxial graphene surface under near-ambient conditions.

The functionalization of graphene is important in practical applications of graphene, such as in catalysts. However, the experimental study of the interactions of adsorbed molecules with functionalized graphene is difficult under ambient conditions at which catalysts are operated. Here, the adsorption of CO2 on an oxygen-functionalized epitaxial graphene surface was studied under near-ambient conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). The oxygen-functionalization of graphene is achieved in situ by the photo-induced dissociation of CO2 with X-rays on graphene in a CO2 gas atmosphere. The oxygen species on the graphene surface is identified as the epoxy group by XPS binding energies and thermal stability. Under near-ambient conditions of 1.6 mbar CO2 gas pressure and 175 K sample temperature, CO2 molecules are not adsorbed on the pristine graphene, but are adsorbed on the oxygen-functionalized graphene surface. The increase in the adsorption energy of CO2 on the oxygen-functionalized graphene surface is supported by first-principles calculations with the van der Waals density functional (vdW-DF) method. The adsorption of CO2 on the oxygen-functionalized graphene surface is enhanced by both the electrostatic interactions between the CO2 and the epoxy group and the vdW interactions between the CO2 and graphene. The detailed understanding of the interaction between CO2 and the oxygen-functionalized graphene surface obtained in this study may assist in developing guidelines for designing novel graphene-based catalysts.

CO2 adsorption on the copper surfaces: van der Waals density functional and TPD studies.

We investigated the adsorption of CO2 on the flat, stepped, and kinked copper surfaces from density functional theory calculations as well as the temperature programmed desorption and X-ray photoelectron spectroscopy. Several exchange-correlation functionals have been considered to characterize CO2 adsorption on the copper surfaces. We used the van der Waals density functionals (vdW-DFs), i.e., the original vdW-DF (vdW-DF1), optB86b-vdW, and rev-vdW-DF2, as well as the Perdew-Burke-Ernzerhof (PBE) with dispersion correction (PBE-D2). We have found that vdW-DF1 and rev-vdW-DF2 functionals slightly underestimate the adsorption energy, while PBE-D2 and optB86b-vdW functionals give better agreement with the experimental estimation for CO2 on Cu(111). The calculated CO2 adsorption energies on the flat, stepped, and kinked Cu surfaces are 20-27 kJ/mol, which are compatible with the general notion of physisorbed species on solid surfaces. Our results provide a useful insight into appropriate vdW functionals for further investigation of related CO2 activation on Cu surfaces such as methanol synthesis and higher alcohol production.

Observation of Fano line shapes in infrared vibrational spectra of CO2 adsorbed on Cu(997) and Cu(111).

Adsorption states of carbon dioxide on the Cu(997) and Cu(111) surfaces were investigated by infrared reflection absorption spectroscopy, temperature programmed desorption, and X-ray photoelectron spectroscopy. CO2 molecules are physisorbed on the Cu(997) surface at temperatures below 70 K; neither chemisorption nor dissociation of CO2 occurs on the Cu(997) surface at this low temperature. However, the vibrational spectra of adsorbed CO2 depend significantly on the substrate temperature and coverage. IR spectra of CO2 vibrational modes at 70 K show asymmetric Fano line shapes, while only normal absorption bands are observed when CO2 is adsorbed at 20 K. Fano line shapes are also observed for CO2 on Cu(111) at 85 K. The observation of Fano effect indicates the coupling between the electronic continuum states of the Cu surface and the internal vibrational modes of CO2 even in such physisorbed system.