Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony.

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

Role of biochar-based free radicals in immobilization and speciation of metals in the contaminated soil-plant environment.

The structure of biochar produced at various pyrolysis temperatures influences metal geochemical behavior. Here, the impact of wheat straw-derived biochar (300, 500, and 700 °C) on the immobilization and transformation of metals in the contaminated soil-plant system was assessed. The findings of the sequential extraction revealed that biochar additives had a substantial influence on the speciation of Cr, Ni, Pb, and Zn in the contaminated soil. The lowest F1 (exchangeable and soluble fraction) + F2 (carbonate fraction) accounted for Cr (44%) in WB-300, Ni (43.87%) in WB-500, Pb (43.79%), and Zn (49.78%) in WB-700 with applied amendments of their total amounts. The characterization results indicated that high pyrolysis temperatures (300-700 °C) increased the carbon-containing groups with the potential to adsorb metals from the soil-plant environment. The bioconcentration and translocation factors (BCF and TF) were less than 1, indicating that metal concentration was restricted to maize roots and translocation to shoots. Reactive oxygen species (ROS) intracellularly influence metal interactions with plants. Electron paramagnetic resonance (EPR) was performed to determine hydroxyl radical generation (•OH) in plant segments to assess the dominance of free radicals (FRs). Consequently, the formation of •OH significantly depends on the pyrolysis temperature and the interaction with a contaminated soil-plant environment. Thus, metal transformation can be effectively decreased in the soil-plant environment by applying WB amendments.

Influence of biochar produced from negative pressure-induced carbonization on transformation of potentially toxic metal(loid)s concerning plant physiological characteristics in industrially contaminated soil.

Soil contamination and its subsequent impact on the food chain is a pressing challenge in the present day. The application of biochar has demonstrated a significant and positive effect on soil health, thereby enhancing plant growth and development. However, the application of biochar (BC) produced from negative pressure-induced carbonization to mitigate metal(loid) contamination is a new strategy that has been studied in current research. Results depicted that the application of biochar derived from the negative pressure carbonization (vacuum-assisted biochar (VBC) has a significant (p ≤ 0.05) positive impact on plant growth and physiological characteristics by influencing immobilization and speciation of metal(loid) in the soil system. Moreover, the interactive effect of VBC on physiological characteristics (photosynthesis, gas exchange, and chlorophyll contents) and antioxidant activities of maize (Zea mays L.) was significantly (p ≤ 0.05) positive by confining the translocation and movement of metal(loid)s to the aerial part of the maize plant. X-ray diffraction (XRD) provided information on the structural and chemical changes induced by the VBC-500 °C explaining metal(loid) adsorption onto mineral surfaces and complexation that can affect their mobility, availability, and toxicity in the contaminated soil. Fourier transform infrared spectroscopy (FTIR) further provided a more detailed understanding of the metal(loid)s and biochar complexation mechanisms influenced by VBC-based functional groups -OH, C-Hn, -COOH, CO, C-O-C, CC, C-O, C-H, OH, and C-C in the binding process. These results suggest that the application of biochar prepared at 500 °C under negative pressure-induced carbonization conditions to the soil is the most efficient way to reduce the uptake and transfer of metal(loid)s by influencing their mobility and availability in the soil-plant system.

Fungi-derived agriculturally important nanoparticles and their application in crop stress management - Prospects and environmental risks.

Nanotechnology has a wide range of agricultural applications, with emphasize on the development of novel nano-agrochemicals such as, nano-fertilizer and nano-pesticides. It has a significant impact on sustainable agriculture by increasing agricultural productivity, while reducing the use of inorganic fertilizers, pesticides, and herbicides. Nano-coating delivery methods for agrochemicals have improved agrochemical effectiveness, safety, and consistency. Biosynthesis of nanoparticles (NPs) has recently been recognized as an effective tool, contrary to chemically derived NPs, for plant abiotic and biotic stress control, and crop improvement. In this regard, fungi have tremendous scope and importance for producing biogenic NPs of various sizes, shapes, and characteristics. Fungi are potential candidates for synthesis of biogenic NPs due to their enhanced bioavailability, biological activity, and higher metal tolerance. However, their biomimetic properties and high capacity for dispersion in soil, water environments, and foods may have negative environmental consequences. Furthermore, their bioaccumulation raises significant concerns about the novel properties of nanomaterials potentially causing adverse biological effects, including toxicity. This review provides a concise outline of the growing role of fungal-mediated metal NPs synthesis, its potential applications in crop field, and associated issues of nano-pollution in soil and its future implications.

In vivo phytotoxic effect of yttrium-oxide nanoparticles on the growth, uptake and translocation of tomato seedlings (Lycopersicon esculentum).

The potential toxicity and ecological risks of rare-earth nanoparticles in the environment have become a concern due to their widespread application and inevitable releases. The integration of hydroponics experiments, partial least squares structural equation modeling (PLS-SEM), and Transmission Electron Microscopy (TEM) were utilized to investigate the physiological toxicity, uptake and translocation of yttrium oxide nanoparticles (Y2O3 NPs) under different hydroponic treatments (1, 5, 10, 20, 50 and 100 mg·L-1 of Y2O3 NPs, 19.2 mg·L-1 Y(NO3)3 and control) in tomato (Lycopersicon esculentum) seedlings. The results indicated that Y2O3 NPs had a phytotoxic effect on tomato seedlings' germination, morphology, physiology, and oxidative stress. The Y2O3 NPs and soluble YIII reduced the root elongation, bud elongation, root activity, chlorophyll, soluble protein content and superoxide dismutase and accelerated the proline and malondialdehyde in the plant with increasing concentrations. The phytotoxic effects of Y2O3 NPs on tomato seedlings had a higher phytotoxic effect than soluble YIII under the all treatments. The inhibition rates of different levels of Y2O3 NPs in shoot and root biomass ranged from 0.2% to 6.3% and 1.0-11.3%, respectively. The bioaccumulation and translocation factors were less than 1, which suggested that Y2O3 NPs significantly suppressed shoot and root biomass of tomato seedlings and easily bioaccumulated in the root. The observations were consistent with the process of concentration-dependent uptake and translocation factor and confirmed by TEM. Y2O3 NPs penetrate the epidermis, enter the cell wall, and exist in the intercellular space and cytoplasm of mesophyll cells of tomato seedlings by endocytic pathway. Moreover, PLS-SEM revealed that the concentration of NPs significantly negatively affects the morphology and physiology, leading to the change in biomass of plants. This study demonstrated the possible pathway of Y2O3 NPs in uptake, phytotoxicity and translocation of Y2O3 NPs in tomato seedlings.

Morpho-chemical characterization and source apportionment of potentially toxic metal(oid)s from school dust of second largest populous city of Pakistan.

Interior settled dust is one of the greatest threats of potentially toxic metal(oid)s (PTMs) exposure to the children, especially in the school environment. Therefore, it is more worthy of having in-depth knowledge of compositional characteristics of school dust. Forty schools were selected of Lahore city for dust sampling. The school dust was analyzed to determine the PTMs (As, Cd, Cr, Cu, Ge, Mo, Ni, Pb, Sb, Sn, Sr, V, and Zn) concentrations using ICP-MS. The morphological characteristics, PTMs speciation, and mineralogy of school dust were examined using SEM with EDS, XPS, and XRD, respectively. Moreover, the geo-accumulation index (Igeo), potential ecological risk index (PERI), and multivariate statistical analysis were employed to assess the pollution levels, ecological risk, and source identification of PTMs, respectively. The Igeo indicated a heavily-extreme pollution level of Cd (Igeo = 4.92), moderate-heavy pollution of Zn (Igeo = 3.22), and Pb (Igeo = 2.78), and slight-moderate pollution of Cr (Igeo = 1.62), and Cu (Igeo = 1.53). The ecological risk has been found extremely high for Cd and moderately high for Pb and As, while potential ecological risk found extremely high posed by cumulatively all selected PTMs. Multivariate statistical analysis showed that sources of PTMs comprise of natural processes as well as several anthropogenic processes like vehicular emissions, agricultural and industrial activities. The SEM, XRD, and XPS analyses demonstrated the presence of airborne particles and PTMs containing minerals with several toxic chemical species in school dust. This study can help to develop strategies to reduce school indoor pollution and hence to establish an eco-friendly learning environment for children.

Enthralling the impact of engineered nanoparticles on soil microbiome: A concentric approach towards environmental risks and cogitation.

Nanotechnology is an avant-garde field of scientific research that revolutionizes technological advancements in the present world. It is a cutting-edge scientific approach that has undoubtedly a plethora of functions in controlling environmental pollutants for the welfare of the ecosystem. However, their unprecedented utilization and hysterical release led to a huge threat to the soil microbiome. Nanoparticles(NPs) hamper physicochemical properties of soil along with microbial metabolic activities within rhizospheric soils.Here in this review shed light on concentric aspects of NP-biosynthesis, types, toxicity mechanisms, accumulation within the ecosystem. However, the accrual of tiny NPs into the soil system has dramatically influenced rhizospheric activities in terms of soil properties and biogeochemical cycles. We have focussed on mechanistic pathways engrossed by microbes to deal with NPs.Also, we have elaborated the fate and behavior of NPs within soils. Besides, a piece of very scarce information on NPs-toxicity towards environment and rhizosphere communities is available. Therefore, the present review highlights ecological perspectives of nanotechnology and solutions to such implications. We have comprehend certain strategies such as avant-garde engineering methods, sustainable procedures for NP synthesis along with vatious regulatory actions to manage NP within environment. Moreover, we have devised risk management sustainable and novel strategies to utilize it in a rationalized and integrated manner. With this background, we can develop a comprehensive plan about NPs with novel insights to understand the resistance and toxicity mechanisms of NPs towards microbes. Henceforth, the orientation towards these issues would enhance the understanding of researchers for proper recommendation and promotion of nanotechnology in an optimized and sustainable manner.

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface-subsurface soils.

The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil environment is influenced by organic matter, mineral phases, and oxidation states in which a particular metal exists. However, the spectroscopic evidence of metal(oid)s interactions in soil with organic matter and mineral phases can induce an extensive understanding. The surface and sub-surface soils (0-50 cm) from four sites of upper Indus basin, Pakistan, were collected and analyzed by using FTIR (Fourier-transform infrared spectroscopy), XRD (X-ray diffraction) and XPS (X-ray photoelectron spectroscopy) in addition to ICP-MS (inductively coupled plasma mass spectrometry) and geochemical fractionation. Geochemical fractionation of metal(oid)s indicated that As, Cu, Ni, Pb, and Zn were mostly found in the potentially bioavailable fractions. However, an increase in the residual fraction was observed from top to bottom. The absorption bands of FTIR spectra were divided into three spectral regions 700-400, 1700-800, and 3700-2800 cm-1. The soil was found rich in organic matter and capable of retaining metals as abundant peaks were observed in the mid-infrared region. The mineralogical analysis of soil samples testified silicon oxides and zeolite as major mineral phases. The XPS spectra showed broad peaks of As(III), As2O3, As4S4, PbO2, and PbCo3. The study concludes that the source identification of metal(oid)s in the upper Indus is crucial to find out the particular source of contamination in the soil.

Carbon fractionation and stable carbon isotopic fingerprint of road dusts near coal power plant with emphases on coal-related source apportionment.

Road dust from coal utilization is a significant source contributing to the generation of pollutants that can affect the health of people residing within close proximity to roadways. In this study, road dust samples were collected from different directions centered around a coal-fired power plant in Huainan. Black carbon (BC), soot, char, organic carbon (OC) and total carbon (TC), as well as the δ13C of samples, were determined. Compared to the reference locations which were distant from the power plant, the research areas surrounding the power plant were featured by significantly higher OC/BC ratio and TC concentration. The OC/BC showed significant difference in urban vs. rural areas, and at different distances from the central power plant, which implied that the source and spread of carbonaceous species was dominantly affected by wind direction and urban/rural area differences. Surface morphology analysis showed that the road dust was mixed with spherical particles similar to fly ash. High-resolution XPS C1s spectrum revealed the existence of metal carbide, metal carbonate, and CF3 in the road dust samples. The speciation of carbon in road dusts was found correlated with sampling directions and urban functional areas. Based on the δ13C and OC/BC, it could be inferred that coal-related substances might be important sources of road dusts.

Contrasting effects of biochar and hydrothermally treated coal gangue on leachability, bioavailability, speciation and accumulation of heavy metals by rapeseed in copper mine tailings.

The purpose of this research was to examine the influence of hydrothermally treated coal gangue (HTCG) with and without biochar (BC) on the leaching, bioavailability, and redistribution of chemical fractions of heavy metals (HMs) in copper mine tailing (Cu-MT). An increase in pH, water holding capacity (WHC) and soil organic carbon (SOC) were observed due to the addition of BC in combination with raw coal gangue (RCG) and HTCG. A high Cu and other HMs concentration in pore water (PW) and amended Cu-MT were reduced by the combination of BC with RCG and/or HTCG, whereas individual application of RCG slightly increased the Cu, Cd, and Zn leaching and bioavailability, compared to the unamended Cu-MT. Sequential extractions results showed a reduction in the exchangeable fraction of Cu, Cd, Pb, and Zn and elevation in the residual fraction following the addition of BC-2% and BC-HTCG. However, individual application of RCG slightly increased the Cu, Cd, and Zn exchangeable fractions assessed by chemical extraction method. Rapeseed was grown for the following 45 days during which physiological parameters, metal uptake transfer rate (TR), bioconcentration factor (BCF), and translocation factor (TF) were measured after harvesting. In the case of plant biomass, no significant difference between applied amendments was observed for the fresh biomass (FBM) and dry biomass (DBM) of shoots and roots of rapeseed. However, BC-2% and BC-HTCG presented the lowest HMs uptake, TR, BCF (BCFroot and BCFshoot), and TF for Cu, Cd, Cr, Ni, Pb, and Zn in rapeseed among the other amendments compared to the unamended Cu-MT. Overall, these findings are indicative that using biochar in combination with RCG and/or HTCG led to a larger reduction in HMs leaching and bioavailability, due to their higher sorption capacity and could be a suitable remediation strategy for heavy metals in a Cu-MT.

Characterizing pollution indices and children health risk assessment of potentially toxic metal(oid)s in school dust of Lahore, Pakistan.

Toxic metal pollution is a renowned environmental concern, especially to sensitive environments like school classrooms and their association with children's health. The study was planned to determine the pollution characteristics of 13 potentially toxic metal (oid)s (PTMs) and their associated children's health risk assessment from school dust samples of considerably three land-use types (residential, roadside, and industrial areas) of Lahore, Pakistan. Geo-accumulation (Igeo), pollution (PI), integrated pollution (IPI) and pollution load (PLI) indexes were used to determine the PTMs contamination and USEPA health risk assessment models were employed to assess the health risks in children. The mean concentrations of Cd, Cr, Cu, Ni, Pb, and Zn for three land-use types were found much higher than the permissible limits. Results of pollution indices revealed that school dust was strongly contaminated with Cd, Pb, and Zn whilst moderately contaminated with Cr and Cu. Moreover, the health risk assessment models revealed no significant non-cancerous risks in children with predominantly highest hazardous index (HI) of Cr in industrial (4.61E-01) and Pb in both roadside (4.30E-01) and residential (2.26E-01) area schools. According to cumulative HI of all PTMs and exposure routes, the land-use areas were in descending order as industrial > roadside > residential. The calculations of hazardous quotient (HQ) showed ingestion was the leading pathway of PTMs exposure through school dust. For carcinogenic health risk (CR), the most prominent PTM was Cr with values of 1.53E-06 in industrial area schools, found close to the tolerable range (1.0E-06). Hence, school dust of Lahore prominently contaminated with eminent PTMs triggering slight health risks predominantly by ingestion exposure to children.

Biochar-assisted transformation of engineered-cerium oxide nanoparticles: Effect on wheat growth, photosynthetic traits and cerium accumulation.

The extensive use of nano-fabricated products in daily life is releasing a large volume of engineered nanoparticles (ENPs) in the environment having unknown consequences. Meanwhile, little efforts have been paid to immobilize and prevent the entry of these emerging contaminants in the food chain through plant uptake. Herein, we investigated the biochar role in cerium oxide nanoparticles (CeO2NPs) bioaccumulation and subsequent translocation in wheat (Triticum aestivum L.) as well as impact on growth, photosynthesis and gas-exchange related physiological parameters. Results indicated that CeO2NPs up to 500 mg L-1 level promoted the plant growth by triggering photosynthesis, transpiration and stomatal conductance. Higher NPs concentration (2000 mg CeO2NPs L-1) has negatively affected the plant growth and photosynthesis related processes. Conversely, biochar amendment with CeO2NPs considerably reduced (~9 folds) the plants accumulated contents of Ce even at 2000 mg L-1 exposure level of CeO2NPs through surface complexation process and alleviated the phyto-toxic effects of NPs on plant growth. XPS and FTIR analysis confirmed the role of biochar-mediated carboxylate and hydroxyl groups bonding with CeO2NPs. These findings provides an inside mechanistic understanding about biochar interaction with nano-pollutants to inhibit their bioavailability to plant body.

A systematic review on global pollution status of particulate matter-associated potential toxic elements and health perspectives in urban environment.

Airborne particulate matter (PM) that is a heterogeneous mixture of particles with a variety of chemical components and physical features acts as a potential risk to human health. The ability to pose health risk depends upon the size, concentration and chemical composition of the suspended particles. Potential toxic elements (PTEs) associated with PM have multiple sources of origin, and each source has the ability to generate multiple particulate PTEs. In urban areas, automobile, industrial emissions, construction and demolition activities are the major anthropogenic sources of pollution. Fine particles associated with PTEs have the ability to penetrate deep into respiratory system resulting in an increasing range of adverse health effects, at ever-lower concentrations. In-depth investigation of PTEs content and mode of occurrence in PM is important from both environmental and pathological point of view. Considering this air pollution risk, several studies had addressed the issues related to these pollutants in road and street dust, indicating high pollution level than the air quality guidelines. Observed from the literature, particulate PTEs pollution can lead to respiratory symptoms, cardiovascular problems, lungs cancer, reduced lungs function, asthma and severe case mortality. Due to the important role of PM and associated PTEs, detailed knowledge of their impacts on human health is of key importance.

A comprehensive review on environmental transformation of selenium: recent advances and research perspectives.

Selenium (Se) is an important micronutrient and essential trace element for both humans and animals, which exist in the environment ubiquitously. Selenium deficiency is an important issue worldwide, with various reported cases of its deficiency. Low selenium contents in some specific terrestrial environments have resulted in its deficiency in humans. However, high levels of selenium in the geochemical environment may have harmful influences and can cause a severe toxicity to living things. Due to its extremely narrow deficiency and toxicity limits, selenium is becoming a serious matter of discussion for the scientists who deals with selenium-related environmental and health issues. Based on available relevant literature, this review provides a comprehensive data about Se sources, levels, production and factors affecting selenium bioavailability/speciation in soil, characteristics of Se, biogeochemical cycling, deficiency and toxicity, and its environmental transformation to know the Se distribution in the environment. Further research should focus on thoroughly understanding the concentration, speciation, Se cycling in the environment and food chain to effectively utilize Se resources, remediate Se deficiency/toxicity, and evaluate the Se states and eco-effects on human health.

A comprehensive review of climate change impacts, adaptation, and mitigation on environmental and natural calamities in Pakistan.

The devastations and damages caused by climate change are apparent across the globe, specifically in the South Asian region where vulnerabilities to climate change among residents are high and climate change adaptation and mitigation awareness are extremely low. Pakistan's low adaptive capacity due to high poverty rate, limited financial resources and shortage of physical resources, and continual extreme climatic events including varying temperature, continual flooding, melting glaciers, saturation of lakes, earthquakes, hurricanes, storms, avalanches, droughts, scarcity of water, pest diseases, human healthcare issues, and seasonal and lifestyle changes have persistently threatened the ecosystem, biodiversity, human communities, animal habitations, forests, lands, and oceans with a potential to cause further damages in the future. The likely effect of climate change on common residents of Pakistan with comparison to the world and their per capita impact of climate change are terribly high with local animal species such as lions, vultures, dolphins, and tortoise facing extinction regardless of generating and contributing diminutively to global GHG emissions. The findings of the review suggested that GHG emissions cause climate change which has impacted agriculture livestock and forestry, weather trends and patterns, food water and energy security, and society of Pakistan. This review is a sectorial evaluation of climate change mitigation and adaption approaches in Pakistan in the aforementioned sectors and its economic costs which were identified to be between 7 to 14 billion USD per annum. The research suggested that governmental interference is essential for sustainable development of the country through strict accountability of resources and regulation implemented in the past for generating state-of-the-art climate policy.

Estimating the pollution characteristics and health risks of potentially toxic metal(loid)s in urban-industrial soils in the Indus basin, Pakistan.

The Indus Basin Irrigation Network (IBIN) plays a vital role in the agricultural system of Pakistan, irrigating seventeen million hectares of cultivated areas. Rapid urbanization, industrialization, and agricultural activities along the Indus basin have influenced the soil quality and human health; it is, therefore, critical to know its pollution characteristics. Soil samples from Indus basin, i.e., Abbottabad (ABT), Haripur (HRP), Attock (ATC), and Islamabad (ISB) have been analyzed for the total contents of potentially toxic metal(loid)s (PTMs) in the top layer. The topsoil samples from 0 to 10 cm depth have been further investigated using different pollution indices and human health risk assessment models. The contamination degree of soil pollution was highest in ISB (33.75), followed by ABT (25.30) and ATC (23.57). The assessment of the daily intake of PTMs by children and adults through different pathways revealed ingestion as the significant exposure pathway. Cr was found to be the major element posing non-carcinogenic health risks to children at ATC whereas the non-carcinogenic risks posed by all other PTMs were within the safe limit. Furthermore, life-time carcinogenic risks for Ni followed by Cr and Cd were greatly exceeded at all locations and As at ATC and ISB for both age groups, but comparatively children were found to be at a higher risk of carcinogenicity. Hence, efficient remediation strategies are needed to reduce the increasing content and health risks of PTMs in the Indus basin.

One-step synthesis of N-doped metal/biochar composite using NH3-ambiance pyrolysis for efficient degradation and mineralization of Methylene Blue.

A series of new biochar-supported composite based on the combination of biochar and metallic nanoparticles (NPs) were produced through single-step pyrolysis of FeCl3-Ti(OBu)4 laden agar biomass under NH3 environment. The physiochemical properties of composites were characterized thoroughly. It has found that heating temperature and N-doping through NH3-ambiance pyrolysis significantly influence the visible-light sensitivity and bandgap energy of composites. The catalytic activities of composites were measured by degradation of Methylene Blue (MB) in the presence or absence of H2O2 and visible-light irradiation. Our best catalyst (N-TiO2-Fe3O4-biochar) exhibits rapid and high MB removal competency (99.99%) via synergism of adsorption, photodegradation, and Fenton-like reaction. Continuous production of O2- and OH radicles performs MB degradation and mineralization, confirmed by scavenging experiments and degradation product analysis. The local trap state Ti3+, Fe3O4, and N-carbon of the catalyst acted as active sites. It has suggested that the Ti3+ and N-doped dense carbon layer improve charge separation and shuttle that prolonged photo-Fenton like reaction. Moreover, the catalyst is highly stable, collectible, and recyclable up to 5 cycles with high MB degradation efficiency. This work provides a new insight into the synthesis of highly visible-light sensitized biochar-supported photocatalyst through NH3-ambiance pyrolysis of NPs-laden biomass.

Developmental selenium exposure and health risk in daily foodstuffs: A systematic review and meta-analysis.

Selenium (Se) is a trace mineral and an essential nutrient of vital importance to human health in trace amounts. It acts as an antioxidant in both humans and animals, immunomodulator and also involved in the control of specific endocrine pathways. The aim of this work is to provide a brief knowledge on selenium content in daily used various foodstuffs, nutritional requirement and its various health consequences. In general, fruits and vegetables contain low content of selenium, with some exceptions. Selenium level in meat, eggs, poultry and seafood is usually high. For most countries, cereals, legumes, and derivatives are the major donors to the dietary selenium intake. Low level of selenium has been related with higher mortality risk, dysfunction of an immune system, and mental failure. Selenium supplementation or higher selenium content has antiviral outcomes and is necessary for effective reproduction of male and female, also decreases the threat of chronic disease (autoimmune thyroid). Generally, some advantages of higher content of selenium have been shown in various potential studies regarding lung, colorectal, prostate and bladder cancers risk, nevertheless results depicted from different trials have been diverse, which perhaps indicates the evidence that supplementation will merely grant advantage if the intakes of a nutrient is deficient. In conclusion, the over-all people should be advised against the usage of Se supplements for prevention of cardiovascular, hepatopathies, or cancer diseases, as advantages of Se supplements are still ambiguous, and their haphazard usage could result in an increased Se toxicity risk. The associations among Se intake/status and health, or disease risk, are complicated and need exposition to notify medical practice, to improve dietary recommendations, and to develop adequate communal health guidelines.

Vanadium toxicity in chickpea (Cicer arietinum L.) grown in red soil: Effects on cell death, ROS and antioxidative systems.

The agricultural soil contaminated with heavy metals induces toxic effects on plant growth. The present study was conducted to evaluate the effects of vanadium (V) on growth, H2O2 and enzyme activities, cell death, ion leakage, and at which concentration; V induces the toxic effects in chickpea plants grown in red soil. The obtained results indicated that the biomass (fresh and dry) and lengths of roots and shoots were significantly decreased by V application, and roots accumulated more V than shoots. The enzyme activities (SOD, CAT, and POD) and ion leakage were increased linearly with increasing V concentrations. However, the protein contents, and tolerance indices were significantly declined with the increasing levels of V. The results about the cell death indicated that the cell viability was badly damaged when plants were exposed to higher V, and induction of H2O2 might be involved in this cell death. In conclusion, all the applied V levels affected the enzymatic activities, and induced the cell death of chickpea plants. Furthermore, our results also confirmed that vanadium ≥ 130 mg kg-1 induced detrimental effects on chickpea plants. Additional investigation is needed to clarify the mechanistic explanations of V toxicity at the molecular level and gene expression involved in plant cell death.

Contrasting effects of biochar, compost and farm manure on alleviation of nickel toxicity in maize (Zea mays L.) in relation to plant growth, photosynthesis and metal uptake.

Nickel (Ni) toxicity in agricultural crops is a widespread problem while little is known about the role of biochar (BC) and other organic amendments like farm manure (FM) from cattle farm and compost (Cmp) on its alleviation. A greenhouse experiment was conducted to evaluate the effects of BC, Cmp and FM on physiological and biochemical characteristics of maize (Zea mays L.) under Ni stress. Maize was grown in Ni spiked soil without and with two rates of the amendments (equivalent to 1% and 2% organic carbon, OC) applied separately to the soil. After harvest, plant height, root length, dry weight, chlorophyll contents, gas exchange characteristics and trace elements in plants were determined. In addition, post-harvest soil characteristics like pHs, ECe and bioavailable Ni were also determined. Compared to the control, all of the amendments increased plant height, root length, shoot and root dry weight with the maximum increase in all parameters by FM (2% OC) treatment. Similarly, total chlorophyll contents and gas exchange characteristics significantly increased with the application of amendments being maximum with FM (2% OC) application. Amendments significantly increased copper, zinc, manganese and iron concentrations and decreased Ni concentrations in the plants. The highest reduction in shoot Ni concentration was recorded with FM (2% OC) followed by BC (2% OC) being 73.2% and 61.1% lower compared to the control, respectively. The maximum increase in soil pH and decrease in AB-DTPA extractable Ni was recorded with BC (2% OC) followed by FM (2% OC). It is concluded that FM (2% OC) was the most effective in reducing Ni toxicity to plants by reducing Ni uptake while BC (2% OC) was the most effective in decreasing bioavailable Ni in the soil through increasing soil pH. However, long-term field studies are needed to evaluate the effects of these amendments in reducing Ni toxicity in plants.