RESUMO
We successfully control the interaction dynamics between optical parametric oscillation (OPO) and stimulated Raman scattering, leading to the generation of distinct frequency comb states in a microresonator. Through Raman-scattered photons, a Raman comb with a sech2 envelope is demonstrated having a broad RF beat note linewidth of several hundred kHz. Moreover, under a specific coupling regime, we successfully generate self-locked Raman single-solitons which is confirmed by a narrow RF beat note of 25â Hz. Remarkably, this spontaneous Raman soliton is deterministically generated through adiabatic pump frequency detuning without the requirement of external locking mechanisms. Additionally, we identify a frequency comb with an unconventional envelope that can be fitted with a Lorentzian × sech2 function, generated via an anti-Stokes process with respect to the Raman comb.
RESUMO
Transporting cold atoms between interconnected vacuum chambers is an important technique for increasing the versatility of cold atom setups, particularly for those that couple atoms to photonic devices. In this report, we introduce a method where we are able to image the atoms at all points during transport via moving optical dipole trap. Cooled 87Rb atoms are transported â¼50 cm into an auxiliary vacuum chamber while being monitored with a moving-frame imaging system for which in-situ characterization of the atom transport is demonstrated. Precise positioning of the atoms near photonic devices is also tested across several tapered fibers showing an axial positioning resolution of â¼450 µm.
RESUMO
An experimental method is developed for robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from Doppler-free fluorescence spectroscopy in an atomic beam with increased frequency locking range. As a result, a stable and narrow-linewidth 556 nm laser maintains the frequency lock status for more than a week and contributes to more accurate evaluation of the Yb optical lattice clock. In addition, the reference optical cavity is supported at vibration-insensitive points without any vibration isolation table, making the laser setup more simple and compact.
RESUMO
We developed a shutter driven by a solenoid to switch on/off the atomic beam of optical lattice clocks developed at KRISS [C. Y. Park et al., Metrologia 50, 119 (2013), S. Lee et al., New J. Phys. 18, 033030 (2016), H. Kim et al., Jpn. J. Appl. Phys. 56, 050302 (2017), and H. Kim et al., Metrologia 58, 055007 (2021)]. The shutter design was focused on long lifetime and compatibility with an ultra-high vacuum (UHV) environment. Thus, the solenoid was designed to be easily installed and removed from the air-side of a CF flange of the shutter. The flag in the vacuum-side moves only with the simple spring action of a sheet of a metal plate without any frictional movement of mechanical parts. All parts in the vacuum-side were made of metals (stainless steel and pure iron) to be baked over the temperature of 200 °C for UHV. The flag head of the shutter displaces up to 10 mm (5 mm) with a response time of 50 (30 ms) and 80 ms (10 ms) for the opening-action and the closing-action, respectively. The lifetime was tested up to 6 × 106 cycles with no performance degradation. We expect the actual lifetime to be much longer than this by virtue of its friction-free design.
RESUMO
578-nm yellow light with an output power of more than 10 mW was obtained using a waveguide periodically-poled-lithium-niobate crystal as a nonlinear medium for second harmonic generation, which is the highest output power at this wavelength using second harmonic generation of a solid state laser source without an enhancement ring cavity, to our knowledge. To achieve this result we made a high power 1156-nm external-cavity diode laser with the maximum output power of more than 250 mW. This system is expected to be an excellent alternative to the system using the sum-frequency generation with the advantage of simplicity and cost-effectiveness, and will be used as a clock laser of the ytterbium optical lattice clock with robust and reliable operation.
RESUMO
This study demonstrates 578 nm yellow light generation with a narrow linewidth using a waveguide periodically poled lithium niboate (PPLN) and an optical injection-locked diode laser. The frequency of an external cavity diode laser used as a master laser operating at 1156 nm in optical injection-locking mode was locked into a high-finesse cavity with the Pound-Drever-Hall technique, which results in a linewidth reduction of the master laser. The linewidth of the master laser was estimated to be approximately 1.6 kHz. In an effort to amplify the optical power, a distributed feed-back laser was phase-locked to the master laser by an optical injection-locking technique. A waveguide PPLN was used for second harmonic generation. Frequency-doubled yellow light of approximately 2.4 mW was obtained with a conversion efficiency of 6.5%.
Assuntos
Lasers de Estado Sólido , Desenho Assistido por Computador , Desenho de Equipamento , Reprodutibilidade dos TestesRESUMO
We develop a terahertz lens with both subwavelength resolution and tunable far-field focal length by extending the surface plasmon (SP) diffraction theory into spoof SPs of slit-groove-structure terahertz metamaterials. The dispersion properties of terahertz groove structures are engineered in the curved depth profile to produce a directional beaming feature and mimic SPs at the same time. The finite-difference time-domain simulation results confirm that the far-field focal position can be tuned by controlling the curvature of the relative electric field phase distribution profile on the output surface.
Assuntos
Engenharia/métodos , Lentes , Espalhamento de Radiação , Análise Espectral , Propriedades de SuperfícieRESUMO
We developed an optical frequency synthesizer (OFS) with the carrier-envelope-offset frequency locked to 0 Hz achieved using the "direct locking method." This method differs from a conventional phaselock method in that the interference signal from a self-referencing f-2f interferometer is directly fed back to the carrier-envelope-phase control of a femtosecond laser in the time domain. A comparison of the optical frequency of the new OFS to that of a conventional OFS stabilized by a phase-lock method showed that the frequency comb of the new OFS was not different to that of the conventional OFS within an uncertainty of 5.68x10(-16). As a practical application of this OFS, we measured the absolute frequency of an acetylene-stabilized diode laser serving as an optical frequency standard in optical communications.
Assuntos
Óptica e Fotônica , Simulação por Computador , Desenho de Equipamento/instrumentação , Interferometria/métodos , Lasers , Dispositivos Ópticos , Física/métodosRESUMO
Advanced satellite-based frequency transfers by two-way carrier-phase (TWCP) and integer precise point positioning have been performed between the National Institute of Information and Communications Technology and Korea Research Institute of Standards and Science. We confirm that the disagreement between them is less than at an averaging time of several days. In addition, an overseas frequency ratio measurement of Sr and Yb optical lattice clocks was directly performed by TWCP. We achieved an uncertainty at the mid-10-16 level after a total measurement time of 12 h. The frequency ratio was consistent with the recently reported values within the uncertainty.
RESUMO
A flag-type atom shutter based on a rotating lever that is driven by a bender piezoelectric actuator was developed to manipulate atomic beams. The shutter flag was displaced by â¼10 mm to open and close a 5-mm-diameter aperture with a shutter time of 13 ms that produced small mechanical vibrations. The short-term shutter time stability for each cycle was 0.03 ms and the long-term stability over an average of 20 000 cycles was 0.02 ms. The operational cycle number (lifetime) of the shutter reached 2.0 × 106 cycles after an intermittent operation over a period of eight months in an ultra-high vacuum chamber, and another shutter in an atmospheric environment swung for 2.6 × 107 cycles of continuous operation at 5 Hz for a period of 60 days without major problems. The shutter was shown to be compatible with the operation in an ultra-high vacuum at a low 10-7 Pa level after a gentle baking treatment.
RESUMO
The presence of spurious spectral components in the microwave excitation may induce frequency shifts in an atomic fountain frequency standard. We discuss how such shifts behave as a function of power variations of the excitation carrier and in the spur-to-carrier ratio. The discussion here is limited to the case of single-sideband spurs, which are generally much more troublesome due to their ability to cause frequency shifts. We find an extremely rich and unintuitive behavior of these frequency shifts. We also discuss how pulsed operation, typical of today's fountain frequency standards, relates to frequency shifts caused by spurs in the microwave spectrum. The conclusion of these investigations is that it is, at best, difficult to use elevated power microwaves in fountain frequency standards to test for the presence of spurs in the microwave spectrum.
RESUMO
In atomic fountain primary frequency standards, the atoms ideally are subjected to microwave fields resonant with the ground-state, hyperfine splitting only during the two pulses of Ramsey's separated oscillatory field measurement scheme. As a practical matter, however, stray microwave fields can be present that shift the frequency of the central Ramsey fringe and, therefore, adversely affect the accuracy of the standard. We investigate these uncontrolled stray fields here and show that the frequency errors can be measured, and indeed even the location within the standard determined by the behavior of the measured frequency with respect to microwave power in the Ramsey cavity. Experimental results that agree with the theory are presented as well.
Assuntos
Guias como Assunto , Micro-Ondas , Modelos Químicos , Ondas de Rádio , Padrões de Referência , Fatores de Tempo , Simulação por Computador , Internacionalidade , VibraçãoRESUMO
An embedded nanosphere dielectric structure on an a-Si ultrathin film improves weighted absorption from 23.8% to 39.9%. The PMMA embedding layer offers a guided wave mode as well as mechanical robustness, in addition to the resonant whispering gallery modes coupling. Broadband light-trapping enhancements are observed by dielectric surface textured structures of hemispheres, nanocones, nanospheres, or embedded nanospheres.
RESUMO
The linewidth of a distributed-feedback (DFB) diode laser at 1156 nm, of which free-running linewidth was 3 MHz, was reduced to 15 kHz using an all-fiber interferometer with 5-m-long path imbalance. Optical power loss and bandwidth limitation were negligible with this short optical fiber patch cord. This result was achieved without acoustic and vibration isolations, and the frequency lock could be maintained over weeks. In addition to its simplicity, compactness, robustness, and cost-effectiveness, this technique can be applied at any wavelength owing to the availability of DFB diode lasers and fiber-optic components.