RESUMO
We report on the formation of bendable and edge-on poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) polymers thin layer used as a hole modification layer (HML) in the inverted perovskite solar cell. The aggregations of 2D layer-like P3CT polymers in dimethylformamide (DMF) solution can be formed via aromaticπ-πstacking interactions and/or hydrogen-bonding interactions with the different concentration from 0.01 to 0.02 wt%, which highly influences the photovoltaic performance of the inverted perovskite solar cells. The atomic-force microscopic images and water droplet contact angle images show that the P3CT polymers modify the surface properties of the transparent conductive substrate and thereby dominating the formation of perovskite crystalline thin films, which play important roles in the highly efficient and stable perovskite solar cells. It is noted that theVOC(JSC) of the encapsulated solar cells values are maintained to be higher than 1.115 V (22 mA cm-2) after 104 d when an optimizedπ-πstacked and hydrogen-bonded P3CT polymer is used as the HML. On the other hand, the solar cell showed a high long-term stability by maintaining 85% of the initial power conversion efficiency in the ambient air for 103 d.
RESUMO
Second harmonic generation (SHG) intensity, Raman scattering stress, photoluminescence and reflected interference pattern are used to determine the distributions of threading dislocations (TDs) and horizontal dislocations (HDs) in thec-plane GaN epitaxial layers on 6 inch Si wafer which is a structure of high electron mobility transistor (HEMT). The Raman scattering spectra show that the TD and HD result in the tensile stress and compressive stress in the GaN epitaxial layers, respectively. Besides, the SHG intensity is confirmed that to be proportional to the stress value of GaN epitaxial layers, which explains the spatial distribution of SHG intensity for the first time. It is noted that the dislocation-mediated SHG intensity mapping image of the GaN epitaxial layers on 6 inch Si wafer can be obtained within 2 h, which can be used in the optimization of high-performance GaN based HEMTs.
RESUMO
Understanding the mechanism of the negative differential resistance (NDR) in transition metal dichalcogenides is essential for fundamental science and the development of electronic devices. Here, the NDR of the current-voltage characteristics was observed based on the glutamine-functionalized WS2quantum dots (QDs). The NDR effect can be adjusted by varying the applied voltage range, air pressure, surrounding gases, and relative humidity. A peak-to-valley current ratio as high as 6.3 has been achieved at room temperature. Carrier trapping induced by water molecules was suggested to be responsible for the mechanism of the NDR in the glutamine-functionalized WS2QDs. Investigating the NDR of WS2QDs may promote the development of memory applications and emerging devices.
RESUMO
Negative differential resistance (NDR) devices have attracted considerable interest due to their potential applications in switches, memory devices, and analog-to-digital converters. Modulation of the NDR is an essential issue for the development of NDR-based devices. In this study, we successfully synthesized graphene oxide quantum dots (GOQDs) using graphene oxide, cysteine, and H2O2. The current-voltage characteristics of the GOQDs exhibit a clear NDR in the ambient environment at room temperature. A peak-to-valley ratio as high as 4.7 has been achieved under an applied voltage sweep from -6 to 6 V. The behavior of the NDR and its corresponding peak-to-valley ratio can be controlled by adjusting the range of applied voltages, air pressure, and relative humidity. Also, the NDR is sensitive to the the concentration of H2O2 added in the synthesis. The charge carrier injection through the trapping states, induced by the GOQD aggregation, could be responsible for the NDR behavior in GOQDs.
RESUMO
Fullerene derivative thin films have been widely used in inverted-type perovskite solar cells as the electron transport layer (ETL) and hole blocking layer. However, the smooth contact at the interface between the hydrophobic [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and hydrophilic CH3NH3PbI3 (MAPbI3) thin film has not yet been completely understood. The contact at the PCBM/MAPbI3 interface strongly influences the photovoltaic performance. The photovoltaic devices were characterized by measuring the light intensity-dependent current density-voltage (J-V) curves and impedance spectra, which show that the contact at the PCBM/MAPbI3 interface simultaneously influences the shunt resistance (carrier recombination) and series resistance (interfacial contact). In addition, x-ray diffraction patterns, atomic force microscopic images, absorbance spectra and photoluminescence spectra were used to explore the contact at the PCBM/MAPbI3 interface. The experimental results show that the flat MAPbI3 thin film cannot be completely covered by a PCBM thin film and thereby results in the s-shape characteristic in the J-V curve of the resultant solar cells. The s-shaped J-V curve can be suppressed by increasing the crystallinity and surface roughness of the MAPbI3 thin film. With the use of an interface modification layer in between the PCBM thin film and Ag cathode, the power conversion efficiency of MAPbI3 solar cells can be increased from 10.50% to 13.71%.
RESUMO
We have developed a facile, fast, and one-step synthetic method to prepare graphene quantum dots (GQDs) simultaneously with nitrogen (N) doping via pulsed laser ablation. The N-doped GQDs (N-GQDs) with an average size around 3 nm and an N/C atomic ratio of 33% have been obtained. The N-GQDs emit blue photoluminescence (PL), where the PL intensity enhances as the N doping increases. The PL enhancement for the N-GQDs with a factor as high as 25 has been achieved as compared to GQDs. The origin of the PL enhancement in GQDs after N doping is attributed to the increased densities of pyridinic and graphitic N.
RESUMO
Compared with most mature cadmium-containing quantum dots (QDs), carbon nanodots (CNDs) are a new class of colloidal nanomaterials that exhibit unique photoluminescence (PL) properties while being nontoxic and easily manufactured using low-cost precursor materials. However, solid-state CNDs exhibit poor PL quantum yields (PL-QYs) and inefficient radiative transition, which significantly hinders their practical use in optoelectronic devices. To address this issue, plasmonic nanoantennas consisting of Au nanorods (Au-NRs) deposited on a flat Au film with inserted dielectric layers were used to enhance the spontaneous emission of solid-state CNDs with broad spectral linewidth. Using steady-state, time-resolved, and spatial-resolved PL measurements, we found that after coupling to plasmonic nanogaps (PNGs), the PL emission was significantly enhanced, accompanied by a PL lifetime shortening to the sub-nanosecond range (≈140â ps). According to the experimental data, the radiative transition is strongly accelerated and can thus overcome the metal loss, leading to a large PL enhancement. Our demonstration can pave the way to the design of eco-friendly nanoemitters with sub-nanosecond PL lifetime for promising applications in light-emitting devices.
RESUMO
Reabsorption-free luminescent solar concentrators (LSCs) are crucial ingredients for photovoltaic windows. Atomically precise metal nanoclusters (NCs) with large Stokes-shifted photoluminescence (PL) hold great promise for applications in LSCs. However, a fundamental understanding of the PL mechanism, particularly on the excited-state interaction and exciton kinetics, is still lacking. Herein, we studied the exciton-phonon coupling and singlet/triplet exciton dynamics for gold-doped silver NCs in a solid matrix. Following photoexcitation, the excitons can be self-trapped via strong exciton-phonon coupling. Subsequently, rapid thermal equilibration between the singlet and triplet states occurs due to the coexistence of small energy splitting and spin-orbit coupling. Finally, broadband delayed fluorescence with a large Stokes shift can be generated, namely, self-trapped, thermally equilibrated delayed fluorescence (ST-TEDF). Benefiting from superior ST-TEDF, we demonstrated efficient LSCs with minimized reabsorption.
RESUMO
The quasi Fermi level for electrons in a soft perovskite crystalline thin film and the contact qualities at the PCBM/perovskite and perovskite/P3CT-Na interfaces can be increased using a facile encapsulation method, which improves the device performance and stability of the resultant perovskite solar cells. In the encapsulated perovskite solar cells, the averaged open-circuit voltage (VOC) largely increases from 0.981 V to 1.090 V after 9 days mainly due to the increased quasi Fermi levels. Besides, the reflectance and photoluminescence (PL) spectra show improved contact qualities at the PCBM/perovskite and perovskite/P3CT-Na interfaces, which can be used to explain the increase in the short-circuit current density (JSC) from 21.68 mA cm-2 to 23.48 mA cm-2 after the encapsulation process. Besides, nanosecond time-resolved PL and temperature-dependent PL spectra can be used to explain the increased VOC, which is mainly due to the increased shallow defect density and thereby increasing the exciton binding energy of the encapsulated perovskite sample. It is noted that the averaged power conversion efficiency (PCE) slowly decreases from 18.24% to 16.52% within 45 days.
RESUMO
Carbon-based nanomaterials hold promise for eco-friendly alternatives to heavy-metal-containing quantum dots (QDs) in optoelectronic applications. Here, boric acid-functionalized graphene quantum dots (B-GQDs) were prepared using bottom-up molecular fusion based on nitrated pyrenes and boric acid. Such B-GQDs with crystalline graphitic structures and hydrogen-bonding functionalities would be suitable model systems for unraveling the photoluminescence (PL) mechanism, while serving as versatile building blocks for supramolecular self-assembly. Unlike conventional GQDs with multiple emissive states, the B-GQDs exhibited excitation-wavelength-independent, vibronic-coupled excitonic emission. Interestingly, their PL spectra can be tuned without largely sacrificing the quantum yield (QY) due to two-dimensional self-assembly. In addition, such B-GQDs in a polystyrene matrix possessed an ultrahigh QY (â¼90%) and large exciton binding energy (â¼300 meV). Benefiting from broadband absorption, ultrahigh QY, and long-wavelength emission, efficient laminated luminescent solar concentrators (100 × 100 × 6.3 mm3) were fabricated, yielding a high power conversion efficiency (1.4%).
RESUMO
Electronic coupling can be used to tailor electronic states and optical properties of the luminophores. Therefore, electronically coupled systems would provide unique properties, which cannot be achieved by individual constituents. Here, electronically coupled gold nanoclusters (AuNCs) were prepared on the basis of organosilane grafting and a sol-gel-derived porous silica template. After prolonged drying, the formed AuNCs@silica composites exhibited red-shifted, line-width-narrowed, deep-red emission with high quantum yields (QYs) of â¼66% due to electronic-coupling-enhanced radiative rates and covalent-bonding-suppressed nonradiative relaxation. Meanwhile, the absorption maximum was slightly blue-shifted, leading to a large Stokes shift. All experimental findings revealed the formation of electronically coupled AuNC aggregates confined inside the nanopores and bonded to silica matrix. The mechanism is distinctly different from conventional aggregation-enhanced emission. Our work would provide great potential to engineer photophysical properties by controlling the packing modes.
RESUMO
Luminescent and transparent composites formed by embedding luminophores in a solid matrix are essential components for several photonic applications, such as luminescent solar concentrators (LSCs) and luminescent down-shifting/conversion layers. For these applications, the optical losses, including reabsorption and scattering need to be minimized, while the photoluminescence (PL) emission must be stable against outdoor environments. Here, highly transparent and luminescent aluminosilicate glass doped with surface-engineered gold nanoclusters (AuNCs) was prepared without involving toxic elements and hazardous solvents. Such an AuNC@glass composite with a high loading (â¼14 wt%) exhibits a unique absorption profile; near-unity absorptance in the absorption range but near-zero reabsorption in the emission region, and thus generates bright PL emission with negligible reabsorption losses. Meanwhile, the PL quantum yield was enhanced (from â¼1% to â¼14%) without sacrificing the Stokes shift, while still maintaining high optical transparency. In addition, they have high stability due to the effective protection of rigid inorganic matrices, and thus would be eco-friendly candidates for further preparation of efficient and reabsorption-free LSCs.
RESUMO
Solar energy can be harvested using luminescent solar concentrators (LSCs) incorporated with edge-mounted solar cells without sacrificing their see-through visibility, thus facilitating the development of solar windows. Eco-friendly carbon dots (CDs) are promising alternatives to heavy-metal-containing quantum dots in LSC applications. Unfortunately, their solid-state quantum yield (QY) at high optical density (required by laminated LSCs) is still low (<30%) and the Stokes shift is only moderate (<100 nm). Here, we studied the host-guest interaction between aminosilane-functionalized, nitrogen-containing CDs (Si-NCDs) and a silica matrix for preparing efficient laminated LSCs. We found that a sol-gel-derived silica matrix with vacuum treatment can efficiently suppress the direct nonradiative transition of the absorbing states and selectively enhance the long-wavelength-emitting surface states. Therefore, the formed Si-NCDs@silica composites simultaneously exhibited high QYs (>60%) and large Stokes shifts (>200 nm) even at a high loading content (â¼10 wt%), while still exhibiting high optical transparency. Moreover, unlike conventional QY reduction upon increasing the excitation wavelengths, such high QY values can be maintained over all excitation wavelengths in the absorption region. Benefiting from these photophysical properties, efficient laminated LSCs were simply prepared, yielding a high optical efficiency of â¼4.4%.
RESUMO
Visible-transparent luminescent solar concentrators (VT-LSCs) can be integrated with solar cells for designing solar glasses. Recently, rare-earth complexes, semiconductor nanocrystals, and carbon nanodots (CNDs) have been applied in developing VT-LSCs. However, several challenges still existed, such as quantum yields (QYs) at high-loading contents, scattering/reabsorption losses, and stability. Here, highly luminescent and visible-transparent composites based on organosilane-functionalized CNDs (Si-CNDs) cross-linked in the siloxane matrix were prepared. The composites with a high-loading content (â¼10 wt %) possess ultrahigh QYs of â¼94% due to surface passivation, cross-linking-enhanced emission, and negligible inter-CND energy transfer. Moreover, they still appear exceptionally transparent and, thus, are suitable for VT-LSCs. Eco-friendly VT-LSCs without colored tinting were fabricated, yielding high internal and external quantum efficiencies of â¼66% and â¼3.9%. Our demonstration would pave a bright way for the utilization of eco-friendly VT-LSCs in solar glasses.
RESUMO
Two-dimensional (2D) layered GaSe films were grown on GaAs (001), GaN/Sapphire, and Mica substrates by molecular beam epitaxy (MBE). The in situ reflective high-energy electron diffraction monitoring reveals randomly in-plane orientations of nucleated GaSe layers grown on hexagonal GaN/Sapphire and Mica substrates, whereas single-orientation GaSe domain is predominant in the GaSe/GaAs (001) sample. Strong red-shifts in the frequency of in-plane [Formula: see text] vibration modes and bound exciton emissions observed from Raman scattering and photoluminescence spectra in all samples are attributed to the unintentionally biaxial in-plane tensile strains, induced by the dissimilarity of symmetrical surface structure between the 2D-GaSe layers and the substrates during the epitaxial growth. The results in this study provide an important understanding of the MBE-growth process of 2D-GaSe on 2D/3D hybrid-heterostructures and pave the way in strain engineering and optical manipulation of 2D layered GaSe materials for novel optoelectronic integrated technologies.
RESUMO
We observed the reflectance spectra of three different nano-scale array structures of Au-coated silicon nanorods. The trends of the reflectance spectra indicate that the localized surface plasmon modes can be spatially controlled by manipulating geometric parameters, namely the lattice constants of the array. In addition, the experimental results were compared with 2D numerical simulations based on the finite element method. Satisfactory agreement between the experimental observations and numerical results was obtained.
RESUMO
In this work we analyzed the blinking statistics data of single CdSe/ZnS quantum dots at very short times to test some predictions of the diffusion-controlled electron transfer (DCET) model. Using autocorrelation function (ACF) approach we could extract the exponent of the inverse power-law blinking statistics down to 1 micros. Such an approach also minimizes human subjectivity in choosing a bin time and an on-off threshold. We showed that the observed stretched exponential decay in the ACF and its relationship to the blinking statistics are consistent with the DCET model, and we set an upper bound for the characteristic time constant t(c).
RESUMO
Colloidal quantum dots (CQDs) have gained much attention as light-emitting materials for light-conversion nano-phosphors and luminescent solar concentrators. Unfortunately, those CQDs involve toxic heavy metals and frequently need to be synthesized in the hazardous organic solvent. In addition, they suffer from severe solid-state aggregation-induced self-quenching and reabsorption losses. To address these issues, here we prepare Zn-coordinated glutathione-stabilized gold-nanocluster (Zn-GSH-AuNCs) assemblies without involving heavy metals and organic solvent. Unlike GSH-AuNCs dispersed in an aqueous solution with poor photoluminescence quantum yields (PL-QYs, typically ~1%), those Zn-GSH-AuNCs powders hold high solid-state PL-QYs up to 40 ± 5% in the aggregated state. Such Zn-induced coordination-enhanced emission (CEE) is attributed to the combined effects of suppressed non-radiative relaxation and enhanced charge-transfer interaction. In addition, they also exhibit a large Stokes shift, thus mitigating both aggregation-induced self-quenching and reabsorption losses. Motivated by these photophysical properties, we demonstrated white-light emission from all non-toxic, aqueous-synthesis nano-materials.
RESUMO
A luminescent solar concentrator (LSC) is composed of loaded luminophores and a waveguide that can be employed to harvest and concentrate both direct and diffused sunlight for promising applications in solar windows. Thus far, most of efficient LSCs still relied on the heavy-metal-containing colloidal quantum dots (CQDs) dispersed into a polymer matrix with a very low loading (typically <1 wt %). Such low-loading constraint is required to mitigate the concentration-induced quenching (CIQ) and maintain high optical quality and film uniformity, but this would strongly reduce the light-absorbing efficiency. To address all issues, greener LSCs with high loading concentration were prepared by in situ cross-linking organosilane-functionalized carbon nanodots (Si-CNDs), and their photophysical properties relevant to LSC operation were studied. The PL emission is stable and does not suffer from the severe CIQ effect for cross-linked Si-CNDs even with 25 wt % loadings, thus exhibiting high solid-state quantum yields (QYs) up to 45 ± 5% after the calibration of the reabsorption losses. Furthermore, such LSCs can still hold high optical quality and film uniformity, leading to low scattering losses and high internal quantum efficiency of â¼22%. However, the reabsorption losses need to be further addressed to realize large-area LSCs based on earth-abundant, cost-effective CNDs.
RESUMO
We propose a tunnel-injection structure, in which WS2 quantum dots (QDs) act as the injector and InGaN/GaN quantum wells (QWs) act as the light emitters. Such a structure with different barrier thicknesses has been characterized using steady-state and time-resolved photoluminescence (PL). A simultaneous enhancement of the PL intensity and PL decay time for the InGaN QW were observed after transfer of charge carriers from the WS2-QD injector to the InGaN-QW emitter. The tunneling time has been extracted from the time-resolved PL, which increases as the barrier thickness is increased. The dependence of the tunneling time on the barrier thickness is in good agreement with the prediction of the semiclassical Wentzel-Kramers-Brillouin model, confirming the mechanism of the tunnel injection between WS2 QDs and InGaN QWs.