Deep learning algorithm for fully automated measurement of sagittal balance in adult spinal deformity.

AIM: Deep learning (DL) algorithms can be used for automated analysis of medical imaging. The aim of this study was to assess the accuracy of an innovative, fully automated DL algorithm for analysis of sagittal balance in adult spinal deformity (ASD). MATERIAL AND METHODS: Sagittal balance (sacral slope, pelvic tilt, pelvic incidence, lumbar lordosis and sagittal vertical axis) was evaluated in 141 preoperative and postoperative radiographs of patients with ASD. The DL, landmark-based measurements, were compared with the ground truth values from validated manual measurements. RESULTS: The DL algorithm showed an excellent consistency with the ground truth measurements. The intra-class correlation coefficient between the DL and ground truth measurements was 0.71-0.99 for preoperative and 0.72-0.96 for postoperative measurements. The DL detection rate was 91.5% and 84% for preoperative and postoperative images, respectively. CONCLUSION: This is the first study evaluating a complete automated DL algorithm for analysis of sagittal balance with high accuracy for all evaluated parameters. The excellent accuracy in the challenging pathology of ASD with long construct instrumentation demonstrates the eligibility and possibility for implementation in clinical routine.

Validation of the Subjective Spine Value: A new single item score for the assessment of spine-specific function.

BACKGROUND: Spinal function can be assessed through different patient reported outcome measures (PROMs). PURPOSE: The aim of the present study was to evaluate a novel single-item score for the assessment of spinal function: The Subjective Spine Value (SSpV). It was hypothesized that the SSpV correlates with the established scores Oswestry disability index (ODI) and Core Outcome Measures Index (COMI). METHODS: Between 08/2020 and 11/2021 151 consecutive patients were prospectively enrolled and completed a questionnaire with the ODI, COMI as well as the SSpV. Patients were divided into 4 groups depending on their specific pathology (Group 1: Degenerative pathologies, Group 2: Tumor, Group 3: Inflammatory / Infection, Group 4: Trauma). Pearson correlation coefficient was used to evaluate correlation between the SSpV and the ODI and COMI separately. Floor and ceiling effects were evaluated. RESULTS: Overall, the SSpV correlated significantly with both ODI (p = < 0.001; r = - 0.640) and COMI (p = < 0.001; r = - 0.640). This was also observed across all investigated groups (range - 0.420-0.736). No relevant floor or ceiling effects were noticed. CONCLUSIONS: The SSpV is a valid single-item score for the assessment of spinal function. The SSpV offers a useful tool to efficiently assess spinal function in a variety of spinal pathologies. LEVEL OF EVIDENCE: I, prospective cohort study.

Fixation stability and implant-associated complications in periacetabular osteotomy: a comparison of screw and K-wire fixation.

AIMS: The aim of this study was to compare the fixation stability and complications in patients undergoing periacetabular osteotomy (PAO) with either K-wire or screw fixation. PATIENTS AND METHODS: We performed a retrospective study to analyze a consecutive series of patients who underwent PAO with either screw or K-wire fixation. Patients who were treated for acetabular retroversion or had previous surgery on the ipsilateral hip joint were excluded. 172 patients (191 hips: 99 K-wire/92 screw fixation) were included. The mean age at the time of PAO was 29.3 years (16-48) in the K-wire group and 27.3 (15-45) in the screw group and 83.9% were female. Clinical parameters including duration of surgery, minor complications (soft tissue irritation and implant migration) and major complications (implant failure and non-union) were evaluated. Radiological parameters including LCE, TA and FHEI were measured preoperatively, postoperatively and at 3-months follow-up. RESULTS: Duration of surgery was significantly reduced in the K-wire group with 88.2 min (53-202) compared to the screw group with 119.7 min (50-261) (p < 0.001). Soft tissue irritation occurred significantly more often in the K-wire group (72/99) than in the screw group (36/92) (p < 0.001). No group showed significantly more implant migration than the other. No major complications were observed in either group. Postoperative LCE, TA and FHEI were improved significantly in both groups for all parameters (p = < 0.0001). There was no significant difference for initial or final correction for the respective parameters between the two groups. Furthermore, no significant difference in loss of correction was observed between the two groups for the respective parameters. CONCLUSION: K-wire fixation is a viable and safe option for fragment fixation in PAO with similar stability and complication rates as screw fixation. An advantage of the method is the significantly reduced operative time. A disadvantage is the significantly higher rate of implant-associated soft tissue irritation, necessitating implant removal. LEVEL OF EVIDENCE: III, retrospective trial.

Correction of severe valgus osteoarthritis by total knee arthroplasty is associated with increased postoperative ankle symptoms.

PURPOSE: The aim of this study was to assess the mid-term clinical outcome of the ankle joint after total knee arthroplasty (TKA) in high-grade valgus osteoarthritis. METHODS: In this case-control study, n = 36 patients with a preoperative mechanical tibiofemoral angle (mTFA) ≥ 15° who underwent TKA between December 2002 and December 2012 were included. The control group (mTFA < 15°) of n = 60 patients was created using case matching. Radiological [mechanical tibiofemoral angle (mTFA) and ankle joint orientation to the ground (G-AJLO)] and clinical parameters [Foot Function Index (FFI), Knee Society Score, Forgotten Joint Score, and Range of Motion (ROM)] were analysed. The mean follow-up time was 59 months (IQR [56, 62]). RESULTS: The degree of correcting the mTFA by TKA significantly correlated with the postoperative FFI (R = 0.95, p < 0.05), although the knee and ankle joint lines were corrected to neutral orientations. A cut-off value of 16.5° [AUC 0.912 (0.85-0.975 95% CI), sensitivity = 0.8, specificity = 0.895] was calculated, above which the odds ratio (OR) for developing ankle symptoms increased vastly [OR 34.0 (9.10-127.02 95% CI)]. ROM restrictions of the subtalar joint displayed a strong significant correlation with the FFI (R = 0.74, p < 0.05), demonstrating that decreased ROM of the subtalar joint was associated with aggravated outcomes of the ankle joint. CONCLUSIONS: In this study, higher degrees of leg axis correction in TKA were associated with increased postoperative ankle symptoms. When TKA is performed in excessive valgus knee osteoarthritis, surgeons should be aware that this might trigger the onset or progression of ankle symptoms, particularly in cases of a stiff subtalar joint. LEVEL OF EVIDENCE: III.

Weight-bearing radiography depends on limb loading.

PURPOSE: The mechanical axis of the lower limb has shown to vary between different weight-bearing conditions and change after total knee arthroplasty (TKA). The purpose of this study was to investigate the correlation between mechanical axis alignment in standing long-leg radiographs and limb loading after TKA. METHODS: Mechanical axis of the lower limb and limb loading have been prospectively evaluated in 115 patients 10 days and 3 months after TKA. By the moment of standing long-leg radiography for analysis of the mechanical leg axis, two digital scales separately captured the load of each limb. RESULTS: Mechanical axis changed from an initial - 1° ± 2° valgus alignment to a varus axis of + 1° ± 2° (p < 0.01). This change in alignment was associated with an increase of limb loading from 89.9 ± 10.7 to 93.0 ± 7.0% (p < 0.01). The mechanical axis strongly correlated with relative limb loading at the first and second measurements (r = 0.804, p < 0.001, respectively, r = 0.562, p < 0.001). A significant change in the rate of outliers was registered within the observation period. These alterations and distinctions were much more pronounced in patients with postoperative incomplete extension (n = 15). CONCLUSIONS: The postoperative mechanical axis correlates with limb loading. A clinical relevant change in frontal alignment of the lower limb is associated with increased limb loading after TKA. The actual mechanical axis can only be assessed at physiological limb loading in long-leg radiographs with complete extension at full weight bearing. LEVEL OF EVIDENCE: Diagnostic study, Level II.

The role of CT scan in postoperative evaluation of distal radius fractures: Retrospective analysis in regard to complications and revision rates.

BACKGROUND: Intraarticular fractures of the distal radius present a challenging problem for surgeons. While preoperative CT scans are considered helpful to understand the type of fracture and to choose an adequate approach, the role of postoperative CT scans is not yet clearly defined. The aim of this study was to analyze indications for postoperative CT scans and to evaluate its potential therapeutic consequence in regard to detection of complications and its influence on revision rates in intraarticular fractures. These findings were used to establish an algorithm to help identifying patients that benefit from a postoperative CT scan. PATIENTS AND METHODS: Ninety-two patients with intraarticular fractures were included. AO type C fractures were seen in about 90% of patients, with type C3 being present in 55% of the patients. According to Frykman's classification type 7 and 8 fractures were found in 93%. Data was analyzed in regard to radiographic results, complications and indication for a postoperative CT scan. RESULTS: Six patients underwent revision surgery. When analyzing data in regard to correlation of radiographs and CT Scans a statistically significant correlation was found. CONCLUSIONS: A high correlation between both imaging techniques can be shown. In inconclusive radiographs, CT scans are recommended to rule out intraarticular screw placement or step offs. Due to the number of patients and the retrospective design, further studies are needed.

ALIF and total disc replacement versus 2-level circumferential fusion with TLIF: a prospective, randomized, clinical and radiological trial.

STUDY DESIGN: Prospective, randomized trial. PURPOSE: The treatment of degenerative disc disease (DDD) with two-level fusion has been associated with a reasonable rate of complications. The aim of the present study was to compare (Hybrid) stand-alone anterior lumbar interbody fusion (ALIF) at L5/S1 with total disc replacement at L4/5 (TDR) as an alternative surgical strategy to (Fusion) 2-level circumferential fusion employing transforaminal lumbar interbody fusion (TLIF) with transpedicular stabilization at L4-S1. METHODS: A total of 62 patients with symptomatic DDD of segments L5/S1 (Modic ≥2°) and L4/5 (Modic ≤2°; positive discography) were enrolled; 31 were treated with Hybrid and 31 with Fusion. Preoperatively, at 0, 12, and a mean follow-up of 37 months, clinical (ODI, VAS) and radiological evaluations (plain/extension-flexion radiographs evaluated for implant failure, fusion, global and segmental lordosis, and ROM) were performed. RESULTS: In 26 of 31 Hybrid and 24 of 31 Fusion patients available at the final follow-up, we found a significant clinical improvement compared to preoperatively. Hybrid patients had significantly lower VAS scores immediately postoperatively and at follow-up compared to Fusion patients. The complication rates were low and similar between the groups. Lumbar lordosis increased in both groups. The increase was mainly located at L4-S1 in the Hybrid group and at L1-L4 in the Fusion group. Hybrid patients presented with increased ROM at L4/5 and L3/4, and Fusion patients presented with increased ROM at L3/4, with significantly greater ROM at L3/4 compared to Hybrid patients at follow-up. CONCLUSIONS: Hybrid surgery is a viable surgical alternative for the presented indication. Approach-related inferior trauma and the balanced restoration of lumbar lordosis resulted in superior clinical outcomes compared to two-level circumferential fusion with TLIF.

Postoperative Increased Loading Leads to an Alteration in the Radiological Mechanical Axis After Total Knee Arthroplasty.

BACKGROUND: Standing long-leg radiographs allow assessment of the mechanical axis in the frontal plane before and after total knee arthroplasty (TKA). An alteration in loading, and hence in the forces acting on the knee joint, occurs postoperatively. We therefore postulated that the mechanical axis measured in the long-leg standing radiograph would change within the first year after TKA. METHODS: Standing long-leg radiographs of 156 patients were performed 7 days, 3 months, and 12 months after TKA with determination of mechanical axis of the lower limb. RESULTS: Seven days after surgery, the mechanical axis amounted 0.8° ± 1.7° valgus. Three months after the operation, at 1.3° ± 1.3° varus, it was significantly different (P < .001) from the primary measurement. No further alteration in the mechanical axis occurred during the first year after TKA. This difference was even more pronounced (P < .001) in patients with a postoperative lack of complete extension. Seven days after surgery, they had a valgus axis deviation of 1.6° ± 1.6°; after 3 months, the measurement amounted 1.2° ± 1.3° varus. CONCLUSION: Measured by a standing long-leg radiograph, the frontal mechanical axis after TKA changes over time. The predictive power of a standing long-leg radiograph in the first week after surgery is limited because limb loading is altered because of pain and is therefore nonphysiological. The actual mechanical axis resulting after TKA can only be assessed in a standing long-leg radiograph at physiological loading.

Pelvic tilt compensates for increased acetabular anteversion.

PURPOSE: Pelvic tilt determines functional orientation of the acetabulum. In this study, we investigated the interaction of pelvic tilt and functional acetabular anteversion (AA) in supine position. METHODS: Pelvic tilt and AA of 138 individuals were measured by computed tomography (CT). AA was calculated in relation to the anterior pelvic plane (APP) and relative to the table plane. We analysed these parameters for gender-specific and age-related differences. RESULTS: The mean pelvic tilt was -0.1 ± 5.5°. Pelvic sagittal rotation displayed no gender nor age related differences. Females showed higher angles of AA compared with males (20.0° vs 17.2°, p < 0.001; AA relative to the APP). Anterior tilting of the pelvis positively correlated with AA and individuals with high AA had a higher anterior pelvic tilt compared with those with low AA (p < 0.0001; AA relative to the APP). CONCLUSIONS: AA has to be calculated regarding pelvic sagittal rotation for correct acetabular orientation. Pelvic tilt is dependent on acetabular orientation and compensates for increased AA.

A locking contoured plate for distal fibular fractures: mechanical evaluation in an osteoporotic bone model using screws of different length.

Osteoporotic bone with poor mechanical capacity provides limited stability after fixation of ankle fractures. Stabilization with an implant providing increased fixation strength in osteoporotic bone could reduce failure rates of fixation and allow a more functional treatment. The purpose of this study was to evaluate a locking contoured plate for fixation of distal fibular fractures in comparison with a conventional contoured plate in an osteoporotic bone model. Eighty cylinders of osteoporotic bone surrogates were fixed with the two plates. We performed torque-to-failure and cyclic testing experiments using screws of different length with a Zwick/Roell testing machine. The locking system showed higher torque-to-failure and maximum torque levels as compared with the conventional plate in torque-to-failure experiments and torsional cyclic testing. The locking contoured plate provides improved fixation strength in the osteoporotic bone model. The locking system may be appropriate for fixation of distal fibular fractures, especially in osteoporotic bone with poor mechanical capacity.

Calcitonin treatment for osteoarthritis and rheumatoid arthritis - a systematic review and meta-analysis of preclinical data.

Purpose: The aim of this study was to investigate the efficacy of calcitonin (CT) in animal models of experimental osteoarthritis (OA) and rheumatoid arthritis (RA), as new stabilized CT formulations are currently being introduced. Methods: A comprehensive and systemic literature search was conducted in PubMed/MEDLINE and Embase databases to identify articles with original data on CT treatment of preclinical OA and RA. Methodological quality was assessed using the Systematic Review Centre for Laboratory Animal Experimentation's risk of bias tool for animal intervention studies. To provide summary estimates of efficacy, a meta-analysis was conducted for outcomes reported in four or more studies, using a random-effects model. Subgroup analyses were employed to correct for study specifics. Results: Twenty-six studies were ultimately evaluated and data from 16 studies could be analyzed in the meta-analysis, which included the following outcomes: bone mineral density, bone volume, levels of cross-linked C-telopeptide of type I collagen, histopathological arthritis score, and mechanical allodynia. For all considered outcome parameters, CT-treated groups were significantly superior to control groups (P = 0.002; P = 0.01; P < 0.00001; P < 0.00001; P = 0.04). For most outcomes, effect sizes were significantly greater in OA than in RA (P ≤ 0.025). High in-between study heterogeneity was detected. Conclusion: There is preclinical evidence for an antioxidant, anti-inflammatory, antinociceptive, cartilage- and bone-protective effect of CT in RA and OA. Given these effects, CT presents a promising agent for the treatment of both diseases, although the potential seems to be greater in OA.

Periacetabular Osteotomy with a Modified Fixation Technique Using K-Wires Shows Clinical Results Comparable to Screw Fixation at Mid-Term Follow-Up.

BACKGROUND: The optimal fixation technique in periacetabular osteotomy (PAO) remains controversial. Modified fixation with Kirschner wires (K-wires) was described as a feasible and safe alternative. However, clinical follow-up of patients treated with this technique is lacking. AIMS: To assess patient-reported outcomes (PROMs) in patients treated with PAO with the K-wire fixation technique and to compare it with the screw fixation technique. METHODS: We conducted an analysis of 202 consecutive PAOs at a single university center between January 2015 and June 2017. A total of 120 cases with complete datasets were included in the final analysis. PAOs with K-wire fixation (n = 63) were compared with screw fixation (n = 57). Mean follow-up was 63 ± 10 months. PROMs assessed included the International Hip Outcome Tool (iHOT 12), Subjective Hip Value (SHV), and UCLA activity score (UCLA). Pain and patient satisfaction (NRS) were evaluated. Joint preservation was defined as non-conversion to total hip arthroplasty (THA). RESULTS: Preoperative baseline PROMs in both fixation groups were similar. In both groups, PROMs (p = <0.001) and pain (p = <0.001) improved significantly. Postoperative functional outcome was similar in both groups: iHOT 12 (71.8 ± 25.1 vs. 73 ± 21.1; p = 0.789), SHV (77.9 ± 21.2 vs. 82.4 ± 13.1; p = 0.192), UCLA (6.9 ± 1.6 vs. 6.9 ± 1.9; p = 0.909), and pain (2.4 ± 2.1 vs. 2.0 ± 2.1; p = 0.302). Patient satisfaction did not differ significantly (7.6 ± 2.6 vs. 8.2 ± 2.2; p = 0.170). Conversion to THA was low in both groups (two vs. none; p = 0.497). CONCLUSION: Periacetabular osteotomy with K-wire fixation provided good clinical results at mid-term follow-up, comparable to those of screw fixation. The technique can therefore be considered a viable option when deciding on the fixation technique in PAO.

Impact of Individual Spinopelvic Anatomy on the Localization and Severity of Symptomatic Isthmic Spondylolisthesis.

STUDY DESIGN: Retrospective analysis of prospectively collected data. OBJECTIVES: Isthmic spondylolisthesis (iSPL) occurs most commonly in L5/S1 and L4/5. This study investigates the association between spinopelvic anatomy and the pathogenesis of iSPL. METHODS: Spinopelvic parameters as well as severity of slip grade were measured in sagittal spine radiographs of symptomatic patients with iSPL in segments L4/5 and L5/S1. Means were calculated and differences between both groups were analyzed. A correlation between the analyzed parameters and degree of slippage was performed. RESULTS: We included 73 subjects in this study; 11 in L4/5 group and 62 in L5/S1 group. Pelvic anatomy significantly differed between L4/5 and L5/S1 iSPL (Pelvic Incidence (PI) 54.8° vs 66.3°, P value = .006; Pelvic Radius (PR) 124.4 mm vs 137.4 mm; P value = .005 and Sacral Table Angle (STA) 101.0° vs 92.2°, P value < .001). The relative degree of slippage was significantly higher in the L5/S1 group (L4/5 29.1% vs L5/S1 40.1%, P value .022). We also observed a significant correlation between pelvic anatomy and the severity of the slip in iSPL at the L5/S1 level. CONCLUSIONS: Pelvic parameters PI and STA play an important role concerning the level of occurrence and severity of iSPL. Spinopelvic anatomy determines the pathogenesis of iSPL.

Subfascial directionality of perforators of the distal lower extremity: an anatomic study regarding selection of perforators for 180-degree propeller flaps.

BACKGROUND: The 180-degree propeller flaps allow closure of soft-tissue defects of the distal lower extremity. In addition to twist, the pedicle is often subject to additional kinking which increases proportionally to the angle at which the perforator pierces through the fascia. This study evaluates the directionality of the perforators at the fascial level to guide in the selection process of the best perforator. MATERIAL AND METHODS: Perforators were identified in the lower extremities of 16 fresh cadavers. The angle of fascial perforation was measured. Perforators were grouped according to source vessel and location. Results were analyzed statistically regarding angle of fascial perforation along the source vessel and region. RESULTS: A total of 324 perforators were identified. Distal perforators pierced the fascia at a significantly greater angle than in the proximal and middle segment of the peroneal and anterior tibial vessels (P < 0.005). Perforators originating from the posterior tibial artery pierced the fascia at less acute angles distally. When grouped according to the region of the perforators, no significant difference was found between perforators from all source vessels in the proximal region of the distal lower extremity. Even distally, perforators from the posterior tibial artery traveled almost perpendicular (P < 0.005). CONCLUSION: Perforators traveling in a near perpendicular manner are ideal to serve as a pedicle for 180-degree propeller flaps as solely the twist has to be distributed along the vessel. The posterior tibial artery was the source to perforators with the most constant, near-perpendicular course, predisposing them for use in 180-degree propeller flaps.

Transversus Abdominis Plane Block Reduces Intraoperative Opioid Consumption in Patients Undergoing Periacetabular Osteotomy.

BACKGROUND: Administering intraoperative analgesia in patients undergoing periacetabular osteotomy (PAO) is challenging due to both the relevant surgical approach and osteotomies, which are associated with pain. The aim of this study was to assess the effect of the transversus abdominis plane block (TAPb) on intraoperative opioid consumption and circulation parameters in PAO patients. PATIENTS AND METHODS: We conducted a two-group randomized-controlled trial involving 42 consecutive patients undergoing PAO for symptomatic developmental dysplasia of the hip (DDH) in our department. Patients assigned to the study group received an ultrasound-guided TAPb with 0.75% ropivacaine before the beginning of the surgery and after general anesthesia induction. Patients assigned to the control group did not receive a TAPb. General anesthesia was conducted according to a defined study protocol. The primary endpoint of the study was the intraoperative opioid consumption, measured in morphine equivalent dose (MED). Secondary endpoints were the assessment of intraoperative heart rate, mean arterial pressure (MAP), need for hypotension treatment, and length of hospital stay (LOHS). A total of 41 patients (n = 21 TAPb group, n = 20 control group) completed the study; of these, 33 were women (88.5%) and 8 were men (19.5%). The mean age at the time of surgery was 28 years (18-43, SD ± 7.4). All operations were performed by a single high-volume surgeon and all TAPb procedures were performed by a single experienced senior anesthesiologist. RESULTS: We observed a significantly lower intraoperative opioid consumption in the TAPb group compared to the control group (930 vs. 1186 MED per kg bodyweight; p = 0.016). No significant differences were observed in the secondary outcome parameters. We observed no perioperative complications. CONCLUSION: Ultrasound-guided TAPb significantly reduces intraoperative opioid consumption in patients undergoing PAO.

RNA editing of Kv1.1 channels may account for reduced ictogenic potential of 4-aminopyridine in chronic epileptic rats.

In rat brain slices, the Kv channel blocker 4-aminopyridine (4-AP) induces seizure-like events. This effect is absent in slices from chronic epileptic rats generated using the kainic acid model. The reason for this phenomenon remained elusive as an altered expression level of Kv channels was ruled out as a mechanism. We recently described that the Ile400Val RNA editing of Kv1.1 generates 4-AP-insensitive Kv1 channels (Kv1.1(I400V)). We therefore hypothesized that altered RNA editing levels account for the reduced ictogenic potency of 4-AP in chronic epileptic rats. We found fourfold increased RNA editing ratios in the entorhinal cortex of chronic epileptic animals compared to healthy control animals. Electrophysiologic recordings in Xenopus oocytes revealed that the observed increased Kv1.1(I400V) editing level can in fact lead to significant loss of 4-AP sensitivity. Our data suggest that altered Kv1.1(I400V) RNA editing contributes to the reduced ictogenic potential of 4-AP in chronic epileptic rats.

Biomechanical evaluation of flexor tendon repair using barbed suture material: a comparative ex vivo study.

PURPOSE: Barbed suture material for tendon repair opens up the possibility of a knotless reconstruction due to an increased suture-tendon interaction. The aim of this study was to compare the tensile strength of a knotted technique with a monofilament polydioxane suture to that of a knotless technique with a barbed suture material, by using a multistrand, modified Kirchmayr-Kessler tenorrhaphy. METHODS: Sixty human flexor digitorum tendons were randomized into 4 groups. A modified, knotted, multistrand Kirchmayr-Kessler technique with an absorbable, monofilament polydioxane suture was compared with a modified, knotless, multistrand Kirchmayr-Kessler technique with an absorbable, unidirectional barbed glycolic-carbonate suture. Tendons were distracted to failure. Mode of failure and load to failure were recorded. RESULTS: The knotless 2-strand Kirchmayr-Kessler barbed suture shows a significantly lower tensile strength than the knotted 2-strand polydioxane suture (p < .001). The comparison of the maximum tensile strength of the knotless (glycolic-carbonate) technique with that of the knotted (polydioxane) 4-strand technique resulted in no significant difference in either technique utilized (p = .737). The tensile strength of the 4-strand technique was greater than that of the corresponding 2-strand technique (p < .001). CONCLUSIONS: The 2-strand Kirchmayr-Kessler barbed suture proved to be insufficient and significantly weaker than the 2-strand polydioxane suture, and therefore it cannot be recommended. With the knotless 4-strand Kirchmayr-Kessler technique, the barbed suture material has the potential to be used in flexor tendon surgery, but it has no advantage over the 4-strand polydioxane suture.

Adequacy of palmaris longus and plantaris tendons for tendon grafting.

PURPOSE: The reconstruction of tendon defects is challenging. The palmaris longus and plantaris tendon are generally considered best for tendon grafting. Only a few studies have examined whether these tendons, when present, meet criteria for successful grafting. The purpose of this study was to evaluate these tendons in regard to adequacy as tendon grafts. METHODS: To evaluate adequacy for grafting, the palmaris longus and plantaris tendons were harvested from 92 arms and legs of 46 cadavers. Macroscopic evaluation and measurements concerning presence, length, and diameter of the tendons were obtained. Criteria for adequacy were a minimum length of 15 cm with diameter of 3 mm or, alternatively, 30 cm with a diameter of 1.5 mm. RESULTS: The palmaris longus tendon was present bilaterally in 36 cases and was absent bilaterally in 4 cases. The plantaris tendon was present bilaterally in 38 cases and absent bilaterally in 4 cases. In 29 cadavers, the palmaris longus tendon did not meet the criteria to be used as a tendon graft. Only in 8 cases were the tendons satisfactory for grafting bilaterally. The plantaris tendon met criteria for grafting in 20 cases bilaterally. In 17 cases, the tendons were considered inadequate bilaterally. CONCLUSIONS: Despite their presence, the palmaris longus and plantaris tendons are adequate for grafting less often than previously thought. In less than 50%, the tendons, although present, would serve as useful grafts. CLINICAL RELEVANCE: Our findings underscore the importance of choosing a second donor site before surgery in case the primarily selected tendon is not found to be suitable.

Measurements of entrance-surface vs. conventional single-ended readout of a monolithic scintillator.

Availability of compact high-gain, low-noise Silicon Photomultipliers (SiPM) prompts us to examine readout sensors on the entrance surface (SES) as compared to the conventional single-ended readout with sensors on the opposing surface. We measured detector response statistics versus 3D position for these configurations using an 8×8 SiPM array on a 15-mm-thick by 32-mm-wide LYSO block. We calibrate an independently distributed multivariate-normal likelihood model and use it to generate maximum-likelihood estimates of 3D interaction position. Spatial resolution improved 14% and timing resolution improved 10% for the SES device. Bias was unaffected. Photodetection efficiency of our prototype SiPM may have limited further improvement in positioning and timing performance. In future work, we will look to utilize SiPM arrays with enhanced photodetection efficiency.

Reconstruction of pressure sores with perforator-based propeller flaps.

Perforator flaps have been successfully used for reconstruction of pressure sores. Although V-Y advancement flaps approximate debrided wound edges, perforator-based propeller flaps allow rotation of healthy tissue into the defect. Perforator-based propeller flaps were planned in 13 patients. Seven pressure sores were over the sacrum, five over the ischial tuberosity, and one on the tip of the scapula. Three patients were paraplegic, six were bedridden, and five were ambulatory. In three patients, no perforators were found. In 10 patients, propeller flaps were transferred. In two patients, total flap necrosis occurred, which was reconstructed with local advancement flaps. In two cases, a wound dehiscence occurred and had to be revised. One hematoma required evacuation. No further complications were noted. No recurrence at the flap site occurred. Local perforator flaps allow closure of pressure sores without harvesting muscle. The propeller version has the added benefit of transferring tissue from a distant site, avoiding reapproximation of original wound edges. Twisting of the pedicle may cause torsion and venous obstruction. This can be avoided by dissecting a pedicle of at least 3 cm. Propeller flaps are a safe option for soft tissue reconstruction of pressure sores.