RESUMO
The superconducting analogue to the semiconducting diode, the Josephson diode, has long been sought with multiple avenues to realization being proposed by theorists1-3. Showing magnetic-field-free, single-directional superconductivity with Josephson coupling, it would serve as the building block for next-generation superconducting circuit technology. Here we realized the Josephson diode by fabricating an inversion symmetry breaking van der Waals heterostructure of NbSe2/Nb3Br8/NbSe2. We demonstrate that even without a magnetic field, the junction can be superconducting with a positive current while being resistive with a negative current. The ΔIc behaviour (the difference between positive and negative critical currents) with magnetic field is symmetric and Josephson coupling is proved through the Fraunhofer pattern. Also, stable half-wave rectification of a square-wave excitation was achieved with a very low switching current density, high rectification ratio and high robustness. This non-reciprocal behaviour strongly violates the known Josephson relations and opens the door to discover new mechanisms and physical phenomena through integration of quantum materials with Josephson junctions, and provides new avenues for superconducting quantum devices.
RESUMO
The environmental deterioration caused by dye wastewater discharge has received considerable attention in recent decades. One of the most promising approaches to addressing the aforementioned environmental issue is the development of photocatalysts with high solar energy consumption efficiency for the treatment of dye-contaminated water. In this study, a novel low-cost π-π biomass-derived black carbon modified g-C3N4 coupled FeIn2S4 composite (i.e., FeInS/BC-CN) photocatalyst is successfully designed and fabricated that reveals significantly improved photocatalytic performance for the degradation of Eosin Yellow (EY) dye in aqueous solution. Under dark and subsequent visible light irradiation, the amount optimized composite reveals 99% removal performance for EY dye, almost three-fold compared to that of the pristine FeInS and BC-CN counterparts. Further, it is confirmed by means of the electron spin resonance spectrometry, quenching experiments, and density functional theory (DFT) calculations, that the hydroxyl radicals (â¢OH) and superoxide radicals (â¢O2 -) are the dominant oxidation species involved in the degradation process of EY dye. In addition, a systematic photocatalytic degradation route is proposed based on the resultant degradation intermediates detectedduring liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis. This work provides an innovative idea for the development of advanced photocatalysts to mitigate water pollution.
RESUMO
Antimony selenide (Sb2 Se3 ) is a highly promising photovoltaic material thanks to its outstanding optoelectronic properties, as well as its cost-effective and eco-friendly merits. However, toxic CdS is widely used as an electron transport layer (ETL) in efficient Sb2 Se3 solar cells, which largely limit their development toward market commercialization. Herein, an effective green Cd-free ETL of SnOx is introduced and deposited by atomic layer deposition method. Additionally, an important post-annealing treatment is designed to further optimize the functional layers and the heterojunction interface properties. Such engineering strategy can optimize SnOx ETL with higher nano-crystallinity, higher carrier density, and less defect groups, modify Sb2 Se3 /SnOx heterojunction with better interface performance and much desirable "spike-like" band alignment, and also improve the Sb2 Se3 light absorber layer quality with passivated bulk defects and prolonged carrier lifetime, and therefore to enhance carrier separation and transport while suppressing non-radiative recombination. Finally, the as-fabricated Cd-free Mo/Sb2 Se3 /SnOx /ITO/Ag thin-film solar cell exhibits a stimulating efficiency of 7.39%, contributing a record value for Cd-free substrate structured Sb2 Se3 solar cells reported to date. This work provides a viable strategy for developing and broadening practical applications of environmental-friendly Sb2 Se3 photovoltaic devices.
RESUMO
The development of efficient and sustainable methods for reducing carbon dioxide (CO2) and converting it into valuable hydrocarbons has gained significant attention. In this study, researchers focused on Ti4+-doped metal-organic framework (MOF-74) photocatalysts. The incorporation of Ti4+ ions into the MOF-74 structure was achieved through a one-pot hydrothermal method. By replacing Zn2+ ions with Ti4+ ions in a substitutional manner, researchers have aimed to enhance the photocatalytic activity of the CO2 reduction. The obtained Ti4+-doped MOF-74 photocatalysts exhibited a significantly improved performance in the reduction of CO2 into carbon monoxide (CO). The doping of Ti4+ ions induced energy bands below the conduction band minimum (CBM) of MOF-74, extending the visible response range and enabling the photocatalysts to utilize a broader spectrum of light for catalytic reactions. This extension of the visible response range enables photocatalysts to utilize a broader spectrum of light for catalytic reactions. The incorporation of Ti4+ ions not only extends the visible response range but also suppresses charge carrier recombination. This work provides valuable insights into the design principles of MOF-based photocatalysts and paves the way for their practical implementation in addressing the energy crisis and reducing greenhouse gas emissions.
RESUMO
Ferroelectric (FE) materials, including BiFeO3 , P(VDF-TrFE), and CuInP2 S6 , are a type of dielectric material with a unique, spontaneous electric polarization that can be reversed by applying an external electric field. The combination of FE and low-dimensional materials produces synergies, sparking significant research interest in solar cells, photodetectors (PDs), nonvolatile memory, and so on. The fundamental aspects of FE materials, including the origin of FE polarization, extrinsic FE materials, and FE polarization quantification are first discussed. Next, the state-of-the-art of FE-based optoelectronic devices is focused. How FE materials affect the energy band of channel materials and how device structures influence PD performance are also summarized. Finally, the future directions of this rapidly growing field are discussed.
RESUMO
Searching for working refrigerant materials is the key element in the design of magnetic cooling devices. Herein, we report on the thermodynamic and magnetocaloric parameters of an X1 phase oxyorthosilicate, Gd2SiO5, by field-dependent static magnetization and specific heat measurements. An overall correlation strength of |J|S2 ≈ 3.4 K is derived via the mean-field estimate, with antiferromagnetic correlations between the ferromagnetically coupled Gd-Gd layers. The magnetic entropy change -ΔSm is quite impressive, reaches 0.40 J K-1 cm-3 (58.5 J K-1 kg-1) at T = 2.7 K, with the largest adiabatic temperature change Tad = 23.2 K for a field change of 8.9 T. At T = 20 K, the lattice entropy SL is small enough compared to the magnetic entropy Sm, Sm/SL = 21.3, which warrants its potential in 2 -20 K cryocoolers with both the Stirling and Carnot cycles. Though with relatively large exchange interactions, the layered A-type spin arrangement ultimately enhances the magnetocaloric coupling, raising the possibilities of designing magnetic refrigerants with a high ratio of cooling capacity to volume.
RESUMO
Graphene moiré superlattice formed by rotating two graphene sheets can host strongly correlated and topological states when flat bands form at so-called magic angles. Here, we report that, for a twisting angle far away from the magic angle, the heterostrain induced during stacking heterostructures can also create flat bands. Combining a direct visualization of strain effect in twisted bilayer graphene moiré superlattices and transport measurements, features of correlated states appear at "non-magic" angles in twisted bilayer graphene under the heterostrain. Observing correlated states in these "non-standard" conditions can enrich the understanding of the possible origins of the correlated states and widen the freedom in tuning the moiré heterostructures and the scope of exploring the correlated physics in moiré superlattices.
RESUMO
Selective hydrogenation with high efficiency under ambient conditions remains a long-standing challenge. Here, a yolk-shell nanostructured catalyst, PdAg@ZIF-8, featuring plasmonic PdAg nanocages encompassed by a metal-organic framework (MOF, namely, ZIF-8) shell, has been rationally fabricated. PdAg@ZIF-8 achieves selective (97.5%) hydrogenation of nitrostyrene to vinylaniline with complete conversion at ambient temperature under visible light irradiation. The photothermal effect of Ag, together with the substrate enrichment effect of the catalyst, improves the Pd activity. The near-field enhancement effect from plasmonic Ag and optimized Pd electronic state by Ag alloying promote selective adsorption of the -NO2 group and therefore catalytic selectivity. Remarkably, the unique yolk-shell nanostructure not only facilitates access to PdAg cores and protects them from aggregation but also benefits substrate enrichment and preferential -NO2 adsorption under light irradiation, the latter two of which surpass the core-shell counterpart, giving rise to enhanced activity, selectivity, and recyclability.
RESUMO
Two-dimensional conductive metal-organic frameworks (2D c-MOFs) are a family of highly tunable and electrically conducting materials that can be utilized in optoelectronics. A major issue of 2D c-MOFs for photodetection is their poor charge separation and recombination dynamics upon illumination. This study demonstrates a Cu3 (HHTP)2 /ZnO type-II heterojunction ultraviolet (UV) photodetector fabricated by layer-by-layer (LbL) deposition, in which the charge separation of photogenerated carriers is enhanced. At optimized MOF layer cycles, the device achieves a responsivity of 78.2â A/W and detectivity of 3.8×109 Jones at 1â V. Particularly, the device can be operated in the self-powered mode with an ultrafast response time of 70â µs, which is the record value for MOF-based photodetectors. In addition, even after 1000-time bending of 180°, the flexible device maintains stable performance. This flexible MOF-based UV photodetector with anti-fatigue and anti-bending properties provides strong implication to wearable optoelectronics.
RESUMO
Atomically ordered intermetallic nanoparticles exhibit improved catalytic activity and durability relative to random alloy counterparts. However, conventional methods with time-consuming and high-temperature syntheses only have rudimentary capability in controlling the structure of intermetallic nanoparticles, hindering advances of intermetallic nanocatalysts. We report a template-directed strategy for rapid synthesis of Pd-based (PdM, M=Pb, Sn and Cd) ultrathin porous intermetallic nanosheets (UPINs) with tunable sizes. This strategy uses preformed seeds, which act as the template to control the deposition of foreign atoms and the subsequent interatomic diffusion. Using the oxygen reduction reaction (ORR) as a model reaction, the as-synthesized Pd3 Pb UPINs exhibit superior activity, durability, and methanol tolerance. The favored geometrical structure and interatomic interaction between Pd and Pb in Pd3 Pb UPINs are concluded to account for the enhanced ORR performance.
RESUMO
2D materials hold promising potential for novel gas separation. However, a lack of in-plane pores and the randomly stacked interplane channels of these membranes still hinder their separation performance. In this work, ferrocene based-MOFs (Zr-Fc MOF) nanosheets, which contain abundant of in-plane micropores, are synthesized as porous supports to fabricate Zr-Fc MOF supported ionic liquid membrane (Zr-Fc-SILM) for highly efficient CO2 separation. The micropores of Zr-Fc MOF nanosheets not only provide extra paths for CO2 transportation, and thus increase its permeance up to 145.15 GPU, but also endow the Zr-Fc-SILM with high selectivity (216.9) of CO2 /N2 through the nanoconfinement effect, which is almost ten times higher than common porous polymer SILM. Furthermore, based on the photothermal-responsive properties of Zr-Fc MOF, the performance is further enhanced (35%) by light irradiation through a photothermal heating process. This provides a brand new way to design light facilitating gas separation membranes.
RESUMO
Type II porous liquids are demonstrated to be promise porous materials. However, the category of porous hosts is very limited. Here, a porous host metal-organic polyhedra (MOP-18) is reported to construct type II porous liquids. MOP-18 is dissolved into 15-crown-5 as an individual cage (5 nm). Both the molecular dynamics simulations and experimental gravimetric CO2 solubility test indicate that the inner cavity of MOP-18 in porous liquids is unoccupied by 15-crown-5 and is accessible to CO2 . Thus, the prepared porous liquids show enhanced gas solubility. Furthermore, the prepared porous liquid is encapsulated into graphene oxide (GO) nanoslits to form a GO-supported porous liquid membrane (GO-SPLM). Owing to the empty cavity of MOP-18 unit cages in porous liquids that reduces the gas diffusion barrier, GO-SPLM significantly enhances the permeability of gas.
RESUMO
The widespread use of electronic equipment, such as computers, cell phones, communication devices and wireless facilities, has increased electromagnetic radiation, which can cause cancer and other diseases in humans. Furthermore, there is an urgent need for excluding the interferences in the aircraft and other precise instruments in military aspects. Therefore, minimizing and attenuating electromagnetic waves are critical issues. In this review, various two-dimensional (2D) materials and structures are discussed for microwave-absorbing and shielding in terms of 'thin, light, wide, and strong' requirements. The typical absorption and attenuation mechanisms are analysed and summarized to deliver an overall view and offer possible trends for future developments. Multiple works have revealed that 2D materials and structures are promising for use in microwave devices. In addition to conventional materials with 2D structures, we focus on new graphene-like materials, such as 2D transition metal dichalcogenides and black phosphorus, due to their beneficial absorbing and shielding properties. These 2D materials will likely play an important role in electromagnetic wave absorption and cancellation in the future. Finally, the related challenges and some new 2D materials are briefly discussed.
RESUMO
The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4-triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine-linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5-protons in poly(1,2,4-triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting-out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.
RESUMO
Inspired by the highly parallel processing power and low energy consumption of the biological nervous system, the development of a neuromorphic computing paradigm to mimic brain-like behaviors with electronic components based artificial synapses may play key roles to eliminate the von Neumann bottleneck. Random resistive access memory (RRAM) is suitable for artificial synapse due to its tunable bidirectional switching behavior. In this work, a biological spiking synapse is developed with solution processed Au@Ag core-shell nanoparticle (NP)-based RRAM. The device shows highly controllable bistable resistive switching behavior due to the favorable Ag ions migration and filament formation in the composite film, and the good charge trapping and transport property of Au@Ag NPs. Moreover, comprehensive synaptic functions of biosynapse including paired-pulse depression, paired-pulse facilitation, post-tetanic potentiation, spike-time-dependent plasticity, and the transformation from short-term plasticity to long-term plasticity are emulated. This work demonstrates that the solution processed bimetal core-shell nanoparticle-based biological spiking synapse provides great potential for the further creation of a neuromorphic computing system.
Assuntos
Potenciais de Ação/fisiologia , Metais/química , Nanocompostos/química , Nanopartículas/química , Sinapses/fisiologia , Plasticidade Neuronal , Neurônios/fisiologia , Soluções , Compostos de Estanho/químicaRESUMO
This publisher's note corrects an error in the funding section in Opt. Lett.43, 2244 (2018)OPLEDP0146-959210.1364/OL.43.002244.
RESUMO
Surface-enhanced Raman scattering (SERS) of a single ZnO nanorod (NR) is demonstrated by coating with Ag nanoparticles (NPs). An enhancement factor of 1.2×103 and 4.4×102 has been obtained for E2 (high) mode (437 cm-1) and A1 (TO) mode (378 cm-1), respectively. Electron paramagnetic resonance measurements reveal an unintentional donor state in ZnO NRs. The enhancement of deep-level emission and micro-absorption mapping of a single ZnO NR further confirms the presence of the donor state. The SERS is believed to result from the charge transfer between ZnO NRs and Ag NPs, which can be enhanced by the empty donor state in ZnO. Finally, single ZnO NRs coated with Ag can be used as good SERS substrates for small molecule detection. This Letter highlights the interaction between point defects and the SERS effect down to a single semiconductor NR.
RESUMO
Manipulating thermal conductivity (κ) plays vital role in high-performance thermoelectric conversion, thermal insulation and thermal management devices. In this work, we using the machine learning-based interatomic potential and the phonon Boltzmann transport equation to systematically investigate layer thickness dependentκof fluorinated graphene (FG). We show that the latticeκof FG can be significantly decreased with Bernal bilayer stacking. Surprisingly, the further increasing of stacking layer can no longer affect theκ, however, theκis increased in the bulk configuration. The variation ofκcan be attributed to the crystal symmetry change from P-3m1 (164) at single layer to P3m1 (156) at multilayer. The decreasing crystal symmetry from single layer to bilayer resulting stronger phonon scattering and thus leading a lowerκ. Moreover, we also show that the contribution of acoustic mode toκdecreases with the increase of layers, while the contribution of optical mode toκis increased with increasing layers. These results provide a further understanding for the phonon scattering mechanism of layer thickness dependentκ.
RESUMO
The development of magnetocaloric materials with a significantly enhanced volumetric cooling capability is highly desirable for the application of adiabatic demagnetization refrigerators in confined spatial environments. Here, the thermodynamic characteristics of a magnetically frustrated spin-7/2 Gd9.33[SiO4]6O2 is presented, which exhibits strongly correlated spin disorder below ≈1.5 K. A quantitative model is proposed to describe the magnetization results by incorporating nearest-neighbor Heisenberg antiferromagnetic and dipolar interactions. Remarkably, the recorded magnetocaloric responses are unprecedentedly large and applicable below 1.0 K. It is proposed that the S = 7/2 spin liquids serve as versatile platforms for investigating high-performance magnetocaloric materials in the sub-kelvin regime, particularly those exhibiting a superior cooling power per unit volume.
RESUMO
The interplay between flexoelectric and optoelectronic characteristics provides a paradigm for studying emerging phenomena in various 2D materials. However, an effective way to induce a large and tunable strain gradient in 2D devices remains to be exploited. Herein, we propose a strategy to induce large flexoelectric effect in 2D ferroelectric CuInP2S6 by constructing a 1D-2D mixed-dimensional heterostructure. The strong flexoelectric effect is induced by enormous strain gradient up to 4.2 × 106 m-1 resulting from the underlying ZnO nanowires, which is further confirmed by the asymmetric coercive field and the red-shift in the absorption edge. The induced flexoelectric polarization efficiently boosts the self-powered photodetection performance. In addition, the improved photoresponse has a good correlation with the induced strain gradient, showing a consistent size-dependent flexoelectric effect. The mechanism of flexoelectric and optoelectronic coupling is proposed based on the Landau-Ginzburg-Devonshire double-well model, supported by density functional theory (DFT) calculations. This work provides a brand-new method to induce a strong flexoelectric effect in 2D materials, which is not restricted to crystal symmetry and thus offers unprecedented opportunities for state-of-the-art 2D devices.