Dioxins and PCBs in Meat - Still a Matter of Concern?

Polychlorinated dibenzodioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) summarized as dioxins, as well as polychlorinated biphenyls (PCBs) are persistent, bio-accumulative and toxic environmental contaminants. Over 95% of human exposure to these problematic chemicals occurs via the ingestion of fatty rich food like meat and meat products, fatty fish, as well as milk and dairy products. Several major food and feed contamination incidents in Europe during the years 1997 and 2010 revealed the necessity of establishing food and feed monitoring programs for dioxins and PCBs. Various monitoring programs carried out by the Federal Office of Public Health (FOPH) and the Federal Food Safety and Veterinary Office (FSVO), suggest that cattle from extensive farming (suckler cow husbandry) exhibited higher levels of dioxin-like PCBs (dl-PCBs) and exceeded with higher frequency the permitted maximum levels (ML) when compared to conventional raised cattle. The reasons for the higher levels are possibly due to higher levels of PCBs in green fodder (pasture, silage, and hay) when compared to the concentrated feed used in conventional farming. Additionally, an increased uptake of soil, which is known to be a risk matrix for the uptake of dioxins and PCBs in grazing animals, leads to elevated contaminant levels in the suckler cows and hence their calves. Furthermore, PCB point sources present on a farm from older building and construction materials (e.g. PCB-containing wall paints) might result in very high contamination of the animals and the meat produced from them.

Dynamic Transgenerational Fate of Polychlorinated Biphenyls and Dioxins/Furans in Lactating Cows and Their Offspring.

We report on two farms in Switzerland heavily contaminated by polychlorinated biphenyls (PCBs) and dioxins (PCDD/Fs), occurring in the first case from diffuse sources and in the second case from PCB-containing wall paint. Extensive measurements of PCBs and PCDD/Fs on site (soil, forage, and paint) and in cattle (blood, fat, and milk) allowed validation of our novel dynamic toxicokinetic model, which includes the transfer of contaminants from the mother cows to their suckling calf and the uptake of soil by grazing cattle. We show that for calves, the mother milk is the main uptake route of contaminants. For both cows and calves, ingestion of contaminated soil, although often overlooked, is an appreciable uptake path. The remediation of the contaminated stable lead to a 2-3 fold reduction of the PCB levels in animals within one year. The transfer of animals to an uncontaminated mountain site during summer proved to be an effective decontamination procedure with up to 50% reduction of the levels within three months. Our study calls for a rapid removal of PCB-containing materials in animal husbandry farms and shows that the diffuse contamination of soils will remain a source for PCBs and PCDD/Fs in our food chain for decades to come.

A Temperate Alpine Glacier as a Reservoir of Polychlorinated Biphenyls: Model Results of Incorporation, Transport, and Release.

In previous studies, the incorporation of polychlorinated biphenyls (PCBs) has been quantified in the accumulation areas of Alpine glaciers. Here, we introduce a model framework that quantifies mass fluxes of PCBs in glaciers and apply it to the Silvretta glacier (Switzerland). The models include PCB incorporation into the entire surface of the glacier, downhill transport with the flow of the glacier ice, and chemical fate in the glacial lake. The models are run for the years 1900-2100 and validated by comparing modeled and measured PCB concentrations in an ice core, a lake sediment core, and the glacial streamwater. The incorporation and release fluxes, as well as the storage of PCBs in the glacier increase until the 1980s and decrease thereafter. After a temporary increase in the 2000s, the future PCB release and the PCB concentrations in the glacial stream are estimated to be small but persistent throughout the 21st century. This study quantifies all relevant PCB fluxes in and from a temperate Alpine glacier over two centuries, and concludes that Alpine glaciers are a small secondary source of PCBs, but that the aftermath of environmental pollution by persistent and toxic chemicals can endure for decades.

Tracking SVOCs' Transfer from Products to Indoor Air and Settled Dust with Deuterium-Labeled Substances.

Semivolatile organic compounds (SVOCs) can be released from products and distributed in the indoor environment, including air and dust. However, the mechanisms and the extent of substance transfer into air and dust are not well understood. Therefore, in a small-scale field study the transfer of nine SVOCs was investigated: Four artificial consumer products were doped with eight deuterium-labeled plasticizers (phthalates and adipates) and installed in five homes to investigate the emission processes of evaporation, abrasion, and direct transfer. Intentional release was studied with a commercial spray containing a pyrethroid. During the 12 week study, indoor air and settled dust samples were collected and analyzed. On the basis of our measurement results, we conclude that the octanol-air partitioning coefficient Koa is a major determinant for the substance transfer into either air or dust: A high Koa implies that the substance is more likely to be found in dust than in air. The emission process also plays a role: For spraying, we found higher dust and air concentrations than for evaporation. In contrast, apartment parameters like air exchange rate or temperature had just a minor influence. Another important mechanistic finding was that although transfer from product to dust currently is postulated to be mostly mediated by air, direct transport from product to dust on the product surface was also observed.

Biofuel-Promoted Polychlorinated Dibenzodioxin/furan Formation in an Iron-Catalyzed Diesel Particle Filter.

Iron-catalyzed diesel particle filters (DPFs) are widely used for particle abatement. Active catalyst particles, so-called fuel-borne catalysts (FBCs), are formed in situ, in the engine, when combusting precursors, which were premixed with the fuel. The obtained iron oxide particles catalyze soot oxidation in filters. Iron-catalyzed DPFs are considered as safe with respect to their potential to form polychlorinated dibenzodioxins/furans (PCDD/Fs). We reported that a bimetallic potassium/iron FBC supported an intense PCDD/F formation in a DPF. Here, we discuss the impact of fatty acid methyl ester (FAME) biofuel on PCDD/F emissions. The iron-catalyzed DPF indeed supported a PCDD/F formation with biofuel but remained inactive with petroleum-derived diesel fuel. PCDD/F emissions (I-TEQ) increased 23-fold when comparing biofuel and diesel data. Emissions of 2,3,7,8-TCDD, the most toxic congener [toxicity equivalence factor (TEF) = 1.0], increased 90-fold, and those of 2,3,7,8-TCDF (TEF = 0.1) increased 170-fold. Congener patterns also changed, indicating a preferential formation of tetra- and penta-chlorodibenzofurans. Thus, an inactive iron-catalyzed DPF becomes active, supporting a PCDD/F formation, when operated with biofuel containing impurities of potassium. Alkali metals are inherent constituents of biofuels. According to the current European Union (EU) legislation, levels of 5 µg/g are accepted. We conclude that risks for a secondary PCDD/F formation in iron-catalyzed DPFs increase when combusting potassium-containing biofuels.

Emissions of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans during 2010 and 2011 in Zurich, Switzerland.

Persistent organic pollutants (POPs) are ubiquitous contaminants of environmental and human health relevance, but their emissions into the environment are still poorly known. In this study, concentrations of selected POPs were measured in ambient air in Zurich, Switzerland, and interpreted with a multimedia mass balance model. The aim of the combination of measurements and modeling was to back-calculate atmospheric emission rates of POPs. Measurements were performed in summer 2010 and winter 2011 and target analytes included polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Estimated emissions were higher in summer than in winter. Emission estimates for Zurich can be extrapolated to annual averages for Switzerland of 312 kg·a(-1) (39 mg·capita(-1)·a(-1)), 53 kg·a(-1) (7 mg·capita(-1)·a(-1)), and 3 kg·a(-1) (0.4 mg·capita(-1)·a(-1), 94 g WHO98-TEQ·a(-1), 65 g I-TEQ·a(-1)) for the six indicator PCBs (iPCBs), the twelve coplanar dioxin-like PCBs (dlPCBs), and the 17 2,3,7,8-chlorosubstituted PCDD/Fs, respectively. The emission rates of iPCBs are in agreement with existing emission inventories, whereas for PCDD/Fs the emissions are five times higher than the estimates from the Swiss national emission inventory. Emissions of dlPCBs in Switzerland are presented here for the first time. Our study also provides the first seasonally resolved emission rates of POPs, which were determined with our combined measurement and modeling approach. These findings highlight the relevance of ongoing sources of POPs, even decades after regulations aiming to reduce or eliminate sources were established.

Polychlorinated dibenzo-p-dioxin and dibenzofuran contamination of free-range eggs: estimation of the laying hen's soil ingestion based on a toxicokinetic model, and human consumption recommendations.

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are ubiquitous in the environment. The main route of human exposure is through food consumption. Soil contamination can be problematic for sanitary safety depending on the usage of the soil, such as farming. In case of environmental soil contamination with PCDD/Fs, hen's eggs may be contaminated due to soil ingestion by hens. For this reason, it is important to understand the parameters that influence eggs' contamination when hens are raised in contaminated areas. After the discovery of a contaminated area in Lausanne (Switzerland), we collected hens' eggs from ten domestic-produced eggs and one farm. Based on PCDD/F measurements of eggs and soil, and a toxicokinetic model, we estimated individual hen's soil intake levels and highlighted appropriate parameters to predict the dose ingested. Recommended weekly consumption for home-produced eggs was calculated based on the tolerable weekly intake proposed by EFSA in 2018. The most important parameter to assess the soil ingestion does not seem to be the soil coverage by vegetation but rather the hen's pecking behaviour, the latter being difficult to estimate objectively. For this reason, we recommend using a realistic soil ingestion interval to assess the distribution of egg PCDD/F concentration from free-range hens reared on contaminated soil. The addition of soil contamination in the toxicokinetic model can then be used to recommend to the general population weekly consumption of eggs. The consumption by adults of free-range eggs produced on land with soil containing >90 ng toxic-equivalent (TEQ)/kg dry soil should be avoided. Even with a low level of soil contamination (1-5 ng TEQ/kg dry soil), we would recommend consuming not more than 5 eggs per week for adults and no more than 2 eggs for children below 4 years old.

Accumulation Rate, Depuration Kinetics, and Tissue Distribution of Polychlorinated Dibenzo-p-Dioxins and Dibenzofurans (PCDD/Fs) in Suckler Ewes (Ovis aries).

Understanding the transfer of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in farm animals is essential for ensuring food safety, but such information for suckler ewes (Ovis aries) has been lacking. This work quantifies the accumulation, tissue distribution, and depuration kinetics of PCDD/Fs in these animals. Six suckler ewes (EXP group) were exposed to PCDD/Fs through contaminated hay (2.3-12.7 ng toxic-equivalent kg-1 dry matter) and then allowed to depurate by switching to noncontaminated hay from 29 days of lactation. Four control ewes were fed continuously with noncontaminated hay. At different time points covering depuration, weaning and slaughter, PCDD/F analysis of milk (three time points), blood and sternal adipose tissue (five time points), Longissimus thoracis muscle, liver, and empty body homogenate at slaughter (188 days of depuration) was performed. A relevant PCDD/F bioaccumulation was observed from oral intake in milk and adipose tissue (biotransfer factors of 1.24 and 1.06 day kg-1 lipids for the sum toxic-equivalent, respectively) in the EXP ewes, especially for penta- and hexa-chlorinated congeners. The EXP ewes' adipose tissue started at 10-fold the EU maximum level (ML) and showed depuration below the ML after 130 days. Specific PCDD/F accumulation in the ewe liver was observed, especially for dibenzofurans. These toxicokinetic data can inform recommendations to ensure the chemical safety of sheep food products.

Evolution of chlorinated paraffin and olefin fingerprints in sewage sludge from 1993 to 2020 of a Swiss municipal wastewater treatment plant.

Exposure of humans to chlorinated paraffins (CPs) and chlorinated olefins (COs) can occur via contact with CP-containing plastic materials. Such plastic materials can contain short-chain CPs (SCCPs), which are regulated as persistent organic pollutants (POPs) under the Stockholm Convention since 2017. Municipal wastewater treatment plants (WWTP) collect effluents of thousands of households and their sludge is a marker for CP exposure. We investigated digested sewage sludge collected in the years 1993, 2002, 2007, 2012, and 2020 from a Swiss WWTP serving between 20000 and 23000 inhabitants. A liquid chromatography mass spectrometry (R > 100000) method, in combination with an atmospheric pressure chemical ionization source (LC-APCI-MS), was used to detect mass spectra of CPs and olefinic side products. A R-based automated spectra evaluation routine (RASER) was applied to search for ∼23000 ions whereof ∼6000 ions could be assigned to CPs, chlorinated mono- (COs), di- (CdiOs) and tri-olefins (CtriOs). Up to 230 CP-, 120 CO-, 50 CdiO- and 20 CtriO-homologues could be identified in sludge. Characteristic fingerprints were deduced describing C- and Cl-homologue distributions, chlorine- (nCl) and carbon- (nC) numbers of CPs and COs. In addition, proportions of saturated and unsaturated material were determined together with proportions of different chain length classes including short- (SC), medium- (MC), long- (LC) and very long-chain (vLC) material. A substantial reduction of SCCPs of 84% was observed from 1993 to 2020. Respective levels of MCCPs, LCCPs and vLCCPs decreased by 61, 69 and 58%. These trends confirm that banned SCCPs and non-regulated CPs are present in WWTP sludge and higher-chlorinated SCCPs were replaced by lower chlorinated MCCPs. Combining high-resolution mass spectrometry with a selective and fast data evaluation method can produce characteristic fingerprints of sewage sludge describing the long-term trends in a WWTP catchment area.

PCDD/F formation in an iron/potassium-catalyzed diesel particle filter.

Catalytic diesel particle filters (DPFs) have evolved to a powerful environmental technology. Several metal-based, fuel soluble catalysts, so-called fuel-borne catalysts (FBCs), were developed to catalyze soot combustion and support filter regeneration. Mainly iron- and cerium-based FBCs have been commercialized for passenger cars and heavy-duty vehicle applications. We investigated a new iron/potassium-based FBC used in combination with an uncoated silicon carbide filter and report effects on emissions of polychlorinated dibenzodioxins/furans (PCDD/Fs). The PCDD/F formation potential was assessed under best and worst case conditions, as required for filter approval under the VERT protocol. TEQ-weighted PCDD/F emissions remained low when using the Fe/K catalyst (37/7.5 µg/g) with the filter and commercial, low-sulfur fuel. The addition of chlorine (10 µg/g) immediately led to an intense PCDD/F formation in the Fe/K-DPF. TEQ-based emissions increased 51-fold from engine-out levels of 95 to 4800 pg I-TEQ/L after the DPF. Emissions of 2,3,7,8-TCDD, the most toxic congener (TEF = 1.0), increased 320-fold, those of 2,3,7,8-TCDF (TEF = 0.1) even 540-fold. Remarkable pattern changes were noticed, indicating a preferential formation of tetrachlorinated dibenzofurans. It has been shown that potassium acts as a structural promoter inducing the formation of magnetite (Fe3O4) rather than hematite (Fe2O3). This may alter the catalytic properties of iron. But the chemical nature of this new catalyst is yet unknown, and we are far from an established mechanism for this new pathway to PCDD/Fs. In conclusion, the iron/potassium-catalyzed DPF has a high PCDD/F formation potential, similar to the ones of copper-catalyzed filters, the latter are prohibited by Swiss legislation.

Effects of a combined Diesel particle filter-DeNOx system (DPN) on reactive nitrogen compounds emissions: a parameter study.

The impact of a combined diesel particle filter-deNO(x) system (DPN) on emissions of reactive nitrogen compounds (RNCs) was studied varying the urea feed factor (α), temperature, and residence time, which are key parameters of the deNO(x) process. The DPN consisted of a platinum-coated cordierite filter and a vanadia-based deNO(x) catalyst supporting selective catalytic reduction (SCR) chemistry. Ammonia (NH3) is produced in situ from thermolysis of urea and hydrolysis of isocyanic acid (HNCO). HNCO and NH3 are both toxic and highly reactive intermediates. The deNO(x) system was only part-time active in the ISO8178/4 C1cycle. Urea injection was stopped and restarted twice. Mean NO and NO2 conversion efficiencies were 80%, 95%, 97% and 43%, 87%, 99%, respectively, for α = 0.8, 1.0, and 1.2. HNCO emissions increased from 0.028 g/h engine-out to 0.18, 0.25, and 0.26 g/h at α = 0.8, 1.0, and 1.2, whereas NH3 emissions increased from <0.045 to 0.12, 1.82, and 12.8 g/h with maxima at highest temperatures and shortest residence times. Most HNCO is released at intermediate residence times (0.2-0.3 s) and temperatures (300-400 °C). Total RNC efficiencies are highest at α = 1.0, when comparable amounts of reduced and oxidized compounds are released. The DPN represents the most advanced system studied so far under the VERT protocol achieving high conversion efficiencies for particles, NO, NO2, CO, and hydrocarbons. However, we observed a trade-off between deNO(x) efficiency and secondary emissions. Therefore, it is important to adopt such DPN technology to specific application conditions to take advantage of reduced NO(x) and particle emissions while avoiding NH3 and HNCO slip.

Transgenerational mass balance and tissue distribution of PCBs and PCDD/Fs from grass silage and soil into cow-calf continuum.

Grass-based suckling beef-derived foods occasionally exceed regulatory levels for polychlorinated biphenyls (PCBs) and dibenzo-p-dioxins/dibenzofurans (PCDD/Fs). Ensuring chemical safety requires understanding the cow-calf transgenerational PCB and PCDD/F fate. The current focus was on dairy cows, omitting transgenerational fate and suckling beef-related physiological effects. This study aimed to investigate PCB and PCDD/F absorption, distribution, metabolism, and excretion within 12 Simmental cows (six primiparous/six multiparous) and 12 calves fed with the milk of their respective mothers for 109 days prepartum until 288 days in milk (DIM), i.e., slaughter time. Eight cows were exposed to a grass silage-soil mixture. Four were decontaminated after DIM164 by receiving uncontaminated grass silage, which four control cows received. An input-output balance during gestation and lactation was computed from PCB, PCDD/F, and lipid inputs (solid feed/milk intakes), outputs (fecal/milk excretions), and body storage (initial/final burdens). At slaughter, PCB and PCDD/F tissue distribution, and lipid allometry were linked. Apparent PCB and PCDD/F absorption rates and metabolized fractions decreased with increasing chlorination. In calves, PCB absorption showed no effect due to chlorination (steady range: 71-87%). High-chlorinated PCB and PCDD/F absorption rates decreased when provided through soil. Cows excreted PCBs and PCDD/Fs via feces (50% relative to input) and milk (9%) and accumulated only 5% in their body, whereas calves accumulated the largest fraction of the total input in their bodies (44%). Cow physiology affected accumulation and excretion, as in primiparous cows, net body burden and milk assimilation efficiencies were higher and lower, respectively, than in multiparous. Liver-specific enrichment was observed in cows and calves (7.0- and 3.2-fold iPCB and dlPCB + PCDD/F TEQ, compared to empty body-based lipid concentrations), whereas iPCBs were also enriched in kidneys (3.1-fold) and muscles (1.5-fold). Consequently, adipose concentrations did not perfectly represent most edible beef tissues. This highlights the essence of integrating the interplay between physicochemical pollutant properties and animal physiology in transgenerational transfer assessments of PCBs and PCDD/Fs.

Accumulation and decontamination kinetics of PCBs and PCDD/Fs from grass silage and soil in a transgenerational cow-calf setting.

Polychlorinated biphenyls (PCBs) and dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) are bioaccumulative pollutants that endanger bovine food safety. Bioaccumulation depends, among others, on the physiological dynamics of the cow's reproductive cycle. However, recent studies have focused only on near steady-state situations. Thus, the effects of animal physiology on PCB + PCDD/F transfer from grass silage and soil to cows' blood, adipose tissue, and milk and subsequently to suckling calves during gestation and lactation were investigated. In the exposed group, nine cows ate a grass silage/contaminated soil mixture (6.6 ± 0.8 µg iPCBs and 2.6 ± 0.4 ng dlPCB + PCDD/F TEQ kgDM-1) for 109 days prepartum until 288 days in milk (DIM). Four of these cows underwent decontamination after DIM164, receiving the same clean grass silage as the four control cows during the experiment. Calves were fed the milk of their respective mothers. In the exposed group, transgenerational bioaccumulation occurred until DIM164, with calf blood and adipose tissue PCB + PCDD/F concentrations reaching levels twice as high as those in their respective mothers. Transfer rates from oral intake to milk ranged from 0.1 up to 42%, depending on pollutant congener, dietary treatment, and reproductive parity of the cow. Congener and parity also influenced the decontamination half-lives of milk. In decontaminated calves, declines in adipose tissue PCB + PCDD/F concentrations coincided with increases in body fat mass. Therefore, it is essential to know the physiological characteristics of cattle, exposure dose and duration, and physicochemical compound properties to perform reliable transfer assessments.

Average transfer factors are not enough: The influence of growing cattle physiology on the transfer rate of polychlorinated biphenyls from feed to adipose.

Food of animal origin accounts for >90% of the overall human exposure to polychlorinated biphenyls (PCBs). Food regulatory maximum levels help to control this exposure, but bovine meat has been found to be prone to exceed those occasionally. In order to ensure the chemical safety of bovine meat, the aim was to explore the dependency of the bioconcentration (BCF) and biotransfer (BTF) factor, and assimilation efficiency (AE) of PCBs on carcass lipid proportion and growth rate of beef cattle. Eleven bulls were fattened for 293 days with three different diets (7.0, 7.4, 7.5 MJ net energy for growth kg-1 dry matter) at PCB background levels, until slaughter at 530 or 600 kg body weight. Feed and perirenal adipose tissue were sampled for PCB analyses via GC/HRMS and carcass lipid proportion was estimated by the 11th rib dissection technique. For all tested PCBs, BCF (ranging from 0.7 to 18.4) and BTF (ranging from 0.1 to 2.7) decreased at least 1.5 up to 10.6-fold when the carcass lipid proportion increased by 4%, resulting from a typical dilution process. For a faster growth rate of 0.18 kg d-1 however, only a non-significant increasing trend in transfer factors (1.1 to 2.1-fold) was seen. Besides, the transfer factors increased with PCB chlorination degree, non-ortho substitution and lipophilicity. These results underpin the complex interaction between animal physiology and PCB physicochemical properties, making it challenging to interpret average transfer factors to support chemical risk assessment and management.

Combined sediment desorption and bioconcentration model to predict levels of dioxin-like chemicals in fish.

Flooding and other sediment disturbances can lead to increases in sediment resuspension. In this context, it is of central importance to understand the kinetics of release from these sediments and the uptake of pollutants, such as polychlorinated biphenyls (PCBs) and polychlorinated dioxins and furans (PCDD/Fs), into aquatic organisms. In the present study, we parameterized a sediment desorption model based on experimentally determined rapidly-desorbing fractions of dioxin-like chemicals (DLCs). We coupled this desorption model with a physiologically-based toxicokinetic model for rainbow trout. This combined model was used to predict DLC concentrations in the muscle of exposed fish. The performance of this model was evaluated using a previously published dataset on DLC uptake from sediment suspensions during simulated re-suspension events. Predictions generally differed less than 10-fold from measured values, and the model showed a good global coefficient of determination (R2) of 0.95. The root mean squared error (RMSE) for PCBs was 0.31 log units and 0.53 log units for PCDD/Fs. The results of our study demonstrate that the prediction of bioconcentration and related risk to fish resulting from sediment resuspension can be accurately predicted using coupled desorption and toxicokinetic models.

Trace-Level Persistent Organic Pollutant Analysis with Gas-Chromatography Orbitrap Mass Spectrometry-Enhanced Performance by Complementary Acquisition and Processing of Time-Domain Data.

The range of commercial techniques for high-resolution gas-chromatography-mass spectrometry (GC-MS) has been recently extended with the introduction of GC Orbitrap Fourier transform mass spectrometry (FTMS). We report on progress with quantitation performance in the analysis of persistent organic pollutants (POP), by averaging of time-domain signals (transients), from a number of GC-FTMS experiment replicates. Compared to a standard GC-FTMS measurement (a single GC-FTMS experiment replicate, mass spectra representation in reduced profile mode), for the 10 GC-FTMS technical replicates of ultratrace POP analysis, sensitivity improvement of up to 1 order of magnitude is demonstrated. The accumulation method was implemented with an external high-performance data acquisition system and dedicated data processing software to acquire the time-domain data for each GC-FTMS replicate and to average the acquired GC-FTMS data sets. Concomitantly, the increased flexibility in ion signal detection allowed the attainment of ultrahigh-mass resolution (UHR), approaching R = 700 000 at m/z = 200.

Regio- and stereoselective isomerization of hexabromocyclododecanes (HBCDs): kinetics and mechanism of beta-HBCD racemization.

Hexabromocyclododecanes (HBCDs) are high production volume chemicals currently produced in quantities exceeding 20000ty(-1). They are used as flame retardants for plastics and textiles. HBCDs are thermally labile compounds, rapidly decomposing at temperatures above 250 degrees C to form bromine radicals, which scavenge other radicals formed during pyrolysis. But certain HBCD stereoisomers must reach the environment without decomposition, because their levels in soils, sediments, and biota are increasing worldwide. The fate of individual HBCD stereoisomers during production, product use, disposal, and transformation in the environment remains unclear. Herein we report on the thermally induced, highly selective isomerization of (+) and (-)beta-HBCD. Regio- and stereoselective migration of only two of the six bromine atoms resulted in the racemization of both beta-HBCDs. First order rate constants (k(rac)) increased from 0.005, 0.011, 0.021, to 0.055min(-1) at 130, 140, 150, and 160 degrees C, corresponding to half life times tau(1/2) of 143, 63, 29, and 14min, respectively. From the deduced kinetic model, we conclude that any thermal treatment of enantiomerically enriched beta-HBCDs in the range of 100-160 degrees C will result in a loss of most optical activity within few hours. The simultaneous inversion of two asymmetric centers occurred with perfect stereocontrol. Selectively, vicinal dibromides with the RR- and the SS-configurations migrated at these temperatures. An intramolecular reaction mechanism with a four-center transition state is postulated, based on the obtained stereoisomer pattern and the observed reaction kinetics. Crystal structure analysis revealed that all vicinal dibromides in beta-HBCDs prefer synclinal (gauche) conformations. However, an antiperiplanar (staggered) conformation is assumed to facilitate the concerted 1.2-shifts of both bromine atoms, resulting in an inversion of both neighboring carbon atoms. First experiments with other HBCD stereoisomers suggest that the presented isomerization mechanism is of relevance for those stereoisomers as well.

Dioxin- and POP-contaminated sites--contemporary and future relevance and challenges: overview on background, aims and scope of the series.

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.

Persistent organic pollutants in red- and white-blooded High-Antarctic notothenioid fish from the remote Weddell Sea.

It has been suggested that High-Antarctic waters, despite their remoteness from human activities, are impacted by anthropogenic pollution, and that the local biota are accumulating the contaminants. At present, no data exist on persistent organic pollutant (POP) body burdens for notothenioid fish inhabiting the High-Antarctic Weddell Sea. We determined the pollutant load in white muscle tissue of red- and white-blooded notothenoids from the Weddell Sea (Trematomus loennbergii and Chionodraco hamatus, respectively), and compared them to our previous measurements of POPs in Low-Antarctic notothenioids. Analytes included various organochlorine pesticides (OCPs), polychlorinated biphenyls (indicator (i) PCBs, dioxine-like (dl) PCBs) and polybrominated diphenyl ethers (PBDEs). The analytical concentrations were converted into 2,3,7,8-TCDD toxic equivalents (TEQs). Compared to T. loennbergii, C. hamatus had lower levels of ß-HCH (0.45 vs. 4.5 ng g-1 lipid weight), and Σ iPCBs (30 vs. 39 ng g-1 lipid weight), as well as lower levels of Σ PBDEs (131 vs. 261 ng g-1 fresh weight). POP body burdens and TEQs were mostly similar to those of Low-Antarctic notothenioids analysed previously, and not related to the trophic positions of the species. The variations in POP levels between and within High- and Low-Antarctic notothenioids only marginally corresponded to sampling site, ecological differences or trophic levels of the species, and might rather be related to metabolism or age effects. The present findings suggest that fishes of High-Antarctic waters, although this area is more remote and less influenced by local human activities, do not show lower POP body burdens than fishes from Low-Antarctic waters.

Persistent organic pollutants, brominated flame retardants and synthetic musks in fish from remote alpine lakes in Switzerland.

Remote alpine lakes do not receive any direct aquatic inputs from anthropogenic activities. Therefore, these ecosystems may receive persistent organic compounds (POPs) by direct atmospheric deposition, only. Consequently, fish dwelling in these ecosystems represent an excellent indicator for the long-term atmospheric input of bioaccumulating and persistent contaminants. In the present study, fish from seven remote alpine lakes, located between 2062 and 2637 m above sea level in south eastern Switzerland (Grisons), were investigated. Lipid-based fish tissue concentrations of pesticides including dichlorodiphenyltrichloroethane (DDT) and its transformation products (2,4'-DDT, 4,4'-DDT, 2,4'-dichlorodiphenyldichloroethane (DDD), 4,4'-DDD, 2,4'-dichlorodiphenyldichloroethene (DDE), 4,4'-DDE), as well as dieldrin, heptachlor exo-epoxide (HPEX), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCH), polychlorinated biphenyls (PCB), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), and polybrominated diphenyl ethers (PBDE) were measured. In addition, seven synthetic musk compounds (Crysolide (ADBI), Phantolide (AHMI), Fixolide (AHTN), Traseolide (ATII), Galaxolide (HHCB), musk ketone (MK), and musk xylene (MX)) were determined. Concentrations of PCB, PCDD/F, and PBDE were in the same range as in fish from the major lakes situated in the Swiss plateau, indicating mainly atmospheric input of these persistent compounds. In contrast, concentrations of synthetic musks which are used as fragrances in laundry detergents and cosmetic products were distinctly lower than concentrations in fish from Swiss plateau lakes which receive inputs from waste water treatment plants.