RESUMO
Multisensory integration enables the simultaneous perception of multiple environmental stimuli while minimizing size and energy consumption. However, conventional multifunctional integration in flexible electronics typically requires large-scale horizontal sensing arrays (such as flexible printed circuit boards), posing decoupling complexities, tensile strain limitation, and spatial constraints. Herein, a fully flexible multimodal sensing system (FMSS) is developed by coupling biomimetic stretchable conductive films (BSCFs) and strain-insensitive communication interfaces using a vertical stacking integration strategy. The FMSS achieves vertical integration without additional adhesives, and it can incorporate individual sensing layers and stretchable interconnects without any essential constraint on their deformations. Accordingly, the temperature and pressure are precisely decoupled simultaneously, and tensile stress can be accurately discerned in different directions. This vertical stacking integration strategy is expected to offer a new approach to significantly streamline the design and fabrication of multimodal sensing systems and enhance their decoupling capabilities.
RESUMO
Flexible strain sensors are promising in sensing minuscule mechanical signals, and thereby widely used in various advanced fields. However, the effective integration of hypersensitivity and highly selective response into one flexible strain sensor remains a huge challenge. Herein, inspired by the hysteresis strategy of the scorpion slit receptor, a bio-inspired flexible strain sensor (BFSS) with parallel through-slit arrays is designed and fabricated. Specifically, BFSS consists of conductive monolayer graphene and viscoelastic styrene-isoprene-styrene block copolymer. Under the synergistic effect of the bio-inspired slit structures and flexible viscoelastic materials, BFSS can achieve both hypersensitivity and highly selective frequency response. Remarkably, the BFSS exhibits a high gage factor of 657.36, and a precise identification of vibration frequencies at a resolution of 0.2 Hz through undergoing different morphological changes to high-frequency vibration and low-frequency vibration. Moreover, the BFSS possesses a wide frequency detection range (103 Hz) and stable durability (1000 cycles). It can sense and recognize vibration signals with different characteristics, including the frequency, amplitude, and waveform. This work, which turns the hysteresis effect into a "treasure," can provide new design ideas for sensors for potential applications including human-computer interaction and health monitoring of mechanical equipment.
RESUMO
Flexible pressure sensors have provided an attractive option for potential applications in wearable fields like human motion monitoring or human-machine interfaces. For the development of flexible pressure sensors, achieving high performance or multifunctions are popular research tendencies in recent years, such as improving their sensitivity, working range, or stability. Sponge materials with porous structures have been demonstrated that they are one of the potential substrates for developing novel and excellent flexible pressure sensors. However, for sponge-based pressure sensors, it is still a great challenge to realize a wide range of pressures from Pa level to hundreds kPa level. And how to achieve mechanical robustness remains unsolved. Here, we develop a flexible pressure sensor based on multicarbon nanotubes (MWCNTs) network-coated porous elastomer sponge with a broad range and robust features for use in wearable applications. Specifically, polyurethane (PU) sponge is used as the substrate matrix while dip-coated PU/MWCNTs composites as a conductive layer, achieving a highly bonding effect between the substrate and the conductive material, hence a great mechanical robust advantage is obtained and the working range also is improved. The pressure sensor show range of up to 350 kPa, while the minimum detection threshold is as low as 150 Pa. And before and after rolling by a bicycle or electric motorcycle, the sensor has the almost same responses, exhibiting great robustness.
RESUMO
Slit sensillum, a unique sensing organ on the scorpion's legs, is composed of several cracks with curved shapes. In fact, it is just its particular morphological distribution and structure that endows the scorpions with ultrasensitive sensing capacity. Here, a scorpion-inspired flexible strain sensor with an ordered concentric circular curved crack array (CCA) was designed and fabricated by using an optimized solvent-induced and template transfer combined method. The morphology of the cracks can be effectively controlled by the heating temperature and the lasting time. Instead of the nonuniform stress distribution induced by disordered cracks, ordered concentric circle curved structures are introduced to generate a uniform stress distribution and larger deformation, which can significantly improve the performance of the strain sensor. Thus, the CCA sensor exhibits ultrahigh sensitivity (GF â¼ 7878.6), excellent stability (over 16 000 cycles), and fast response time (110 ms). Furthermore, the CCA sensor was demonstrated to be feasible for monitoring human motions and detecting noncontact vibration signals, indicating its great potential in human-health monitoring and vibration signal detection applications.
RESUMO
For advanced flexible strain sensors, it is not difficult to achieve high sensitivity only. However, integrating high sensitivity, high stability, and high durability into one sensor still remains a great challenge. Fortunately, natural creatures with diversified excellent performances have given us a lot of ready-made solutions. Here, scorpion and spiderweb are selected as coupling bionic prototypes, which are famous for their ultrasensitive sensing capacity and excellent structural durability, respectively. Based on that, a bioinspired strain sensor is successfully fabricated. The results demonstrate that the bioinspired strain sensor has a sensitivity of 940.5 in the strain range of 0-1.5% and a sensitivity of 2742.3 between 1.5 and 2.5%. Meantime, this sensor with a spiderweb-like reticular structure has a great improvement in stability and durability. Specifically, the sensor exhibits excellent stability during bending and stretching cycles over 80,000 times. Moreover, the response time and recovery time of the sensor are 169 and 195 ms, respectively. Besides, the sensor also has functions such as vibrating frequency identification due to its low hysteresis. Based on the excellent performance, the sensor can be applied to monitor human body motions serving as wearable electronics.
Assuntos
Dispositivos Eletrônicos Vestíveis , Eletrônica , Humanos , Monitorização Fisiológica , Movimento (Física)RESUMO
Sensors are widely used in various fields, among which flexible strain sensors that can sense minuscule mechanical signals and are easy to adapt to many irregular surfaces are attractive for structure health monitoring, early detection, and failure prevention in humans, machines, or buildings. In practical applications, subtle and abnormal vibrations generated from any direction are highly desired to detect and even orientate their directions initially to eliminate potential hazards. However, it is challenging for flexible strain sensors to achieve hypersensitivity and omnidirectionality simultaneously due to the restrictions of many materials with anisotropic mechanical/electrical properties and some micro/nanostructures they employed. Herein, it is revealed that the vision-degraded scorpion detects subtle vibrations spatially and omnidirectionally using a slit sensillum with fan-shaped grooves. A bioinspired flexible strain sensor consisting of curved microgrooves arranged around a central circle is devised, exhibiting an unprecedented gauge factor of over 18 000 and stability over 7000 cycles. It can sense and recognize vibrations of diverse input waveforms at different locations, bouncing behaviors of a free-falling bead, and human wrist pulses regardless of sensor installation angles. The geometric designs can be translated to other material systems for potential applications including human health monitoring and engineering failure detection.
Assuntos
Nanoestruturas , Dispositivos Eletrônicos Vestíveis , Anisotropia , Humanos , VibraçãoRESUMO
There is currently a growing demand for flexible strain sensors with high performance and water repellency for various applications such as human motion monitoring, sweat or humidity detection, and certain underwater tests. Among these strain sensors, paper-based ones have attracted increasing attention because they coincide with the future development trend of environment-friendly electronic products. However, paper-based electronics are easy to fail when they encounter water and are thus unable to be applied to humid or underwater circumstances. Herein, based on a strategy of coupling bionics inspired by lotus leaf and scorpion, which exhibit superhydrophobic characteristics and ultrasensitive vibration-sensing capacity, respectively, a paper-based strain sensor with high sensitivity and water repellency is successfully fabricated. As a result, the strain sensor exhibits a gauge factor of 263.34, a high strain resolution (0.098%), a fast response time (78 ms), excellent stability over 12,000 cycles, and a water contact angle of 164°. Owing to the bioinspired structures and function mechanisms, the paper-based strain sensor is suitable to not only serve as regular wearable electronics to monitor human motions in real-time but also to detect subtle underwater vibrations, demonstrating its great potential for numerous applications like wearable electronics, water environmental protection, and underwater robots.
Assuntos
Monitorização Fisiológica/instrumentação , Papel , Estresse Mecânico , Dispositivos Eletrônicos Vestíveis , Adulto , Animais , Biomimética/métodos , Técnicas Biossensoriais , Humanos , Interações Hidrofóbicas e Hidrofílicas , Lotus , Masculino , Movimento , Folhas de Planta/química , Escorpiões , Vibração , Água/químicaRESUMO
Flexible strain sensors have an irreplaceable role in critical and emerging fields, such as electronic skins, flexible robots, and prosthetics. Although numerous efforts have been made to improve sensor sensitivity to meet specific application scenarios, the signal-to-noise ratio (SNR) is an extremely critical and non-negligible indicator, which takes into account higher sensitivity, meaning that they can also detect the noise signals with high sensitivity. Coincidentally, scorpions with ultrasensitive vibration sensilla also face such a dilemma. Here, it is found that the scorpion ingeniously uses the viscoelastic material in front of its slit sensilla to realize efficient preprocessing of the signal. Its mechanism is that the loss factor of materials changes with frequency, affecting energy storage and transmission. Inspired by this ingenious strategy, a bioinspired strain sensor insensitive to a low strain rate was designed using a two-step template transfer method. As a result, its relative change in resistance reached 110% under the same strain (0.3197%) but with different strain rates (0.1 Hz and â¼20 Hz). The noncontact vibration experiments also show different responses to low-frequency vibration and high-frequency impact. Moreover, it can also be used as a typical flexible strain sensor. Under the tensile state, it has a gauge factor (GF) as high as 4596 upon 0.6% strain, and the response time is 140 ms. Therefore, it is expected that this strain sensor will be used in many important ultraprecision measurement fields, especially when the measured signal is small.