RESUMO
Electrocatalysis is a crucial method for achieving global carbon neutrality, serving as an essential means of energy conversion, and electrocatalyst is crucial in the process of electrocatalysis. Because of the abundant active sites, the multi-component synergistic effect of high-entropy materials has a wide application prospect in the field of electrocatalysis. Moreover, due to the special structure of high-entropy materials, it is possible to obtain almost continuous adsorption energy distribution by regulating the composition, which has attracted extensive attention of researchers. This paper reviews the properties and types of high-entropy materials, including alloys and compounds. The synthesis strategies of high-entropy materials are systematically introduced, and the solid phase synthesis, liquid-phase synthesis, and gas-phase synthesis are classified and summarized. The application of high-entropy materials in electrocatalysis is summarized, and the promotion effect of high-entropy strategy in various catalytic reaction processes is summarized. Finally, the current progress of high-entropy materials, the problems encountered, and the future development direction are reviewed. It is emphasized that the strategy of high flux density functional theory calculation guiding high-entropy catalyst design will be of great significance to electrocatalysis.
RESUMO
Exploring and developing novel strategies for constructing heterostructure electrocatalysts is still challenging for water electrolysis. Herein, a creative etching treatment strategy is adopted to construct NiSe2 /Ni0.85 Se heterostructure. The rich heterointerfaces between NiSe2 and Ni0.85 Se emerge strong electronic interaction, which easily induces the electron transfer from NiSe2 to Ni0.85 Se, and tunes the charge-state of NiSe2 and Ni0.85 Se. In the NiSe2 /Ni0.85 Se heterojunction nanomaterial, the higher charge-state Ni0.85 Se is capable of affording partial electrons to combine with hydrogen protons, inducing the rapid formation of H2 molecule. Accordingly, the lower charge-state NiSe2 in the NiSe2 /Ni0.85 Se heterojunction nanomaterial is more easily oxidized into high valence state Ni3+ during the oxygen evolution reaction (OER) process, which is beneficial to accelerate the mass/charge transfer and enhance the electrocatalytic activities towards OER. Theoretical calculations indicate that the heterointerfaces are conducive to modulating the electronic structure and optimizing the adsorption energy toward intermediate H* during the hydrogen evolution reaction (HER) process, leading to superior electrocatalytic activities. To expand the application of the NiSe2 /Ni0.85 Se-2h electrocatalyst, urea is served as the adjuvant to proceed with the energy-saving hydrogen production and pollutant degradation, and it is proven to be a brilliant strategy.
RESUMO
Heteroatoms Fe, F co-doped NiO hollow spheres (Fe, F-NiO) are designed, which simultaneously integrate promoted thermodynamics by electronic structure modulation with boosted reaction kinetics by nano-architectonics. Benefiting from the electronic structure co-regulation of Ni sites by introducing Fe and F atoms in NiO , as the rate-determined step (RDS), the Gibbs free energy of OH* intermediates (ΔGOH* ) for Fe, F-NiO catalyst is significantly decreased to 1.87 eV for oxygen evolution reaction (OER) compared with pristine NiO (2.23 eV), which reduces the energy barrier and improves the reaction activity. Besides, densities of states (DOS) result verifies the bandgap of Fe, F-NiO(100) is significantly decreased compared with pristine NiO(100), which is beneficial to promote electrons transfer efficiency in electrochemical system. Profiting by the synergistic effect, the Fe, F-NiO hollow spheres only require the overpotential of 215 mV for OER at 10 mA cm-2 and extraordinary durability under alkaline condition. The assembled Fe, F-NiO||Fe-Ni2 P system only needs 1.51 V to reach 10 mA cm-2 , also exhibits outstanding electrocatalytic durability for continuous operation. More importantly, replacing the sluggish OER by advanced sulfion oxidation reaction (SOR) not only can realize the energy saving H2 production and toxic substances degradation, but also bring additional economic benefits.
RESUMO
Aquatic macrophytes and algae are the most important sources of autochthonous dissolved organic matter (DOM), and their transformation and reuse significantly affect aquatic ecosystem health. In this study, Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) was used to identify the molecular features between submerged macrophyte-derived DOM (SMDOM) and algae-derived DOM (ADOM). The photochemical heterogeneity between SMDOM and ADOM by UV254-irradiation and their molecular mechanism were also discussed. The results showed that the molecular abundance of SMDOM was dominated by lignin/CRAM-like structures, tannins, and concentrated aromatic structures (sum of 91.79%), while that of ADOM was dominated by lipids, proteins, and unsaturated hydrocarbons (sum of 60.30%). UV254-radiation resulted in a net reduction of tyrosine-like, tryptophan-like and terrestrial humic-like, and conversely a net production of marine humic-like. The light decay rate constants obtained by the multiple exponential function model fitting revealed that both tyrosine-like and tryptophan-like components of SMDOM could be rapidly and directly photodegraded, while the photodegradation of tryptophan-like in ADOM depended on the production of photosensitizers. The photo-refractory fractions of both SMDOM and ADOM were as follows: humic-like > tyrosine-like > tryptophan-like. Our results provide new insights into the fate of autochthonous DOM in aquatic ecosystems where "grass-algae" coexist or evolve.
Assuntos
Matéria Orgânica Dissolvida , Ecossistema , Triptofano , Proteínas , Plantas , Tirosina , Substâncias Húmicas/análiseRESUMO
BACKGROUND: The popularity of aesthetic breast surgery in China results in greater demand for assessing risk factors for complications and mortality. OBJECTIVES: To determine the incidence and independent risk factors for postoperative complications following aesthetic breast surgery in China. METHODS: A retrospective cohort study on 4973 patients who had aesthetic breast surgery between 2012 and 2021 was performed. Postoperative complications include minor complications (incision healing impaired, hematoma, or fat liquefaction) and surgical site infection (SSI), which were recorded within 30 days after surgery. The follow-up time was expanded to 1 year only after prosthesis implantation procedures. Potential risk factors including age, weight, length of hospital stay, operation time, volume resection, incision location, and other clinical profile information were evaluated. RESULTS: Among 4973 patients who underwent aesthetic breast surgery, the minor complication rate was 0.54%, and SSI was 0.68%. Augmentation with prosthesis implantation had the highest SSI rate (4.23%), which was significantly associated with increasing age (relative risk [RR] 1.12; P < 0.01) and periareolar incision (RR 5.87, P < 0.01). After augmentation with autologous fat transplantation, postoperative antibiotic use (RR 6.65, P < 0.01) was an independent risk factor for SSI. After adjusting for weight, volume resection over 1500 g (RR 14.7, P < 0.01) was an independent risk factor for SSI of reduction-mastopexy surgery. The complication rate of reduction mammaplasty (1.01%) and gynecomastia correction was lower (0.75%), and there was no record of complication in mastopexy procedures (n = 161). CONCLUSION: The incidence of postoperative complications following aesthetic breast surgery is low. Risk factors for complications mainly include increasing age, perioperative antibiotic use, periareolar incision, and extensive volume resection. Much more attention should be focused on those high-risk patients in clinical practice to decrease breast infection. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .
Assuntos
Neoplasias da Mama , Complicações Pós-Operatórias , Humanos , Feminino , Estudos Retrospectivos , Fatores de Risco , Complicações Pós-Operatórias/epidemiologia , AntibacterianosRESUMO
Commuters are reportedly exposed to severe traffic-related air pollution (TRAP) during their commuting trips. This study was designed and implemented to (1) compare particulate matter (PM) exposure across four common transportation modes; (2) examine and analyze various determining factors; and (3) estimate public health effects caused by commuting exposure to PM. All analyses and calculations were based on the experimental data collected from 13 volunteers, including heart-rate data on 336 commuting trips in four travel modes in Xi'an China. The results indicate highest PM exposure associated with cycling (average PM10, PM2.5 and PM1.0 of 114.35, 72.37 and 56.51 µg/m3, respectively), followed by riding transit buses (116.29, 67.60 and 51.12 µg/m3 for the same pollutants, respectively), then taking a taxi (97.61, 58.87 and 45.11 µg/m3), and the lowest exposure onboard subways (55.86, 46.20 and 40.20 µg/m3). A multivariable linear regression model was used to examine major influences on PM concentration variations, with results corroborating significant PM variance across commuting modes, which is also affected by background pollution concentration and relative humidity. Further, years of life expectancy (YLE) loss were estimated using an inhalation dose model together with the life table method: cycling commuters experienced the greatest YLE loss (5.51-6.43 months per capita for the studied age group). During severe pollution periods, substituting other modes (like subway) for cycling could effectively avoid acute exposure. PM2.5 levels in taxi cabins powered by CNG or methanol were comparatively lower, indicating that implementing alternative energy strategies could effectively lower traffic emissions and population exposure.
Assuntos
Poluentes Atmosféricos/análise , Exposição Ambiental/análise , Expectativa de Vida , Material Particulado/análise , Meios de Transporte/estatística & dados numéricos , Poluição do Ar/análise , Ciclismo , China , Feminino , Frequência Cardíaca , Humanos , Masculino , Poluição Relacionada com o Tráfego/análise , Emissões de Veículos/análiseRESUMO
Asparagus officinalis L. is a dioecious perennial plant globally known for its fine flavor and high nutritional value. An evaluation of genetic diversity in 46 asparagus accessions was carried out based on morphological and inter-simple sequence repeat (ISSR) markers. The result show that the coefficient of variation for 20 morphological characteristics is between 12.45 and 62.22%. Factor analysis revealed that nine factors explained 83.37% of the total variance. At Euclidean distance of 135.7, 46 accessions were divided into two clusters. Genetic similarity coefficient (GSC) based on ISSR data ranged from 0.60 to 0.97, suggesting a relatively abundant genetic base. Furthermore, the 46 asparagus accessions could also be grouped into three major clusters at a GSC of 0.74. And there is no significant relation between the two marker systems using the Mantel test. Clustering based on morphological traits compared with that based on ISSR data was not consistent, however, some common groupings were observed between two dendrograms. Therefore the results elucidated asparagus germplasm genetic background and determined hybrid parents, which will facilitate optimal application of asparagus germplasm resources and provide additional data for genetic improvement.
RESUMO
BACKGROUND: Psychological investigations and functional imaging technology have been used to describe neural correlations of different types of memory with various stimuli. Memory with limited storage capacity and a short retention time can be classified as short-term memory (STM) while long-term memory (LTM) can be life-long without defined capacity. METHODS: To identify brain activation pattern associated with different modes of memory for numerical figures, we detected brain activities from twenty-two healthy subjects when performing three types of memory tasks for numbers, namely STM, LTM and working memory (WM), by using functional magnetic resonance imaging (fMRI) technique. RESULTS: The result revealed variable patterns of activation in different brain regions responding to different types of memory tasks. The activation regions with primary processing and transient maintenance of STM for numerical figures are located in the visual cortex and mainly encoded by visual representations, while LTM was encoded by semantics and mainly recruiting left frontal cortex. We also found that subcortical structures, such as the caudate nucleus and the marginal division of the striatum, plays important roles in working memory. CONCLUSIONS: Activation of different brain regions in these three kinds of memories, indicating that different kinds of memories rely on different neural correlates and mental processes.
Assuntos
Encéfalo/fisiologia , Imageamento por Ressonância Magnética , Memória de Longo Prazo/fisiologia , Memória de Curto Prazo/fisiologia , Mapeamento Encefálico , Feminino , Humanos , Masculino , Adulto JovemRESUMO
BACKGROUND: State-related brain structural alterations in patients with episodic tension-type headache (ETTH) are unclear. We aimed to conduct a longitudinal study to explore dynamic gray matter (GM) changes between the pain and pain-free phases in ETTH. METHODS: We recruited 40 treatment-naïve ETTH patients and 40 healthy controls. All participants underwent brain structural scans on a 3.0-T MRI system. ETTH patients were scanned in and out of pain phases. Voxel-based morphometry analysis was used to determine the differences in regional gray matter density (GMD) between groups. Additional regression analysis was used to identify any associations between regional GMD and clinical symptoms. RESULTS: ETTH patients exhibited reduced GMD in the bilateral primary somatosensory cortex, and increased GMD in the bilateral anterior cingulate cortex (ACC) and anterior insula for the in pain phase compared with the out of pain phase. The out of pain phase of ETTH patients exhibited no regions with higher or lower GMD compared with healthy controls. GMD in the left ACC and left anterior insula was negatively correlated with headache days. GMD in the left ACC was negatively correlated with anxiety and depressive symptoms in ETTH patients. CONCLUSIONS: This is the first study to demonstrate dynamic and reversible GMD changes between the pain and pain-free phases in ETTH patients. However, this balance might be disrupted by increased headache days and progressive anxiety and depressive symptoms.
Assuntos
Encéfalo/diagnóstico por imagem , Córtex Cerebral/diagnóstico por imagem , Substância Cinzenta/diagnóstico por imagem , Giro do Cíngulo/diagnóstico por imagem , Plasticidade Neuronal , Dor/diagnóstico por imagem , Córtex Somatossensorial/diagnóstico por imagem , Cefaleia do Tipo Tensional/diagnóstico por imagem , Adulto , Ansiedade/psicologia , Estudos de Casos e Controles , Depressão/psicologia , Feminino , Humanos , Estudos Longitudinais , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Dor/psicologia , Cefaleia do Tipo Tensional/psicologiaRESUMO
A rod-shaped bacterium was isolated from the soil in a karst area of Guilin, China and its biotransformation of steroidal saponins in sisal (Agave sisalana Perrine) to tigogenin was presented for the first time. A total of 22 strains for the degradation of steroidal saponins in sisal were isolated from 48 soil samples, and the isolated rod-shaped, bacterial strain ZG-21 was used for the production of tigogenin due to its highest degradation efficiency of steroidal saponins in sisal. The parameters affecting biotransformation by strain ZG-21 were optimized. Under the optimized conditions of temperature (30 °C), pH (6), time (5 days) and substrate concentration (5 mg/mL), a maximum tigogenin yield of 26.7 mg/g was achieved. Compared with the conventional method of acid hydrolysis, the biotransformation method provided a clean and eco-friendly alternative for the production of tigogenin.
RESUMO
OBJECTIVE: This study aimed to compare the efficacy of computed tomography (CT)-guided minimally invasive puncture and drainage (MIPD) and craniotomy for hematoma evacuation in the treatment of cerebellar hemorrhage. METHODS: This single-center prospective cohort study was conducted from January 2020 to February 2023. During the study period, 40 patients with cerebellar hemorrhage who underwent CT-guided MIPD treatment were enrolled in the CT-guided MIPD (CTGMIPD) group, and 40 patients with the cerebellar hemorrhage who had a propensity score matching that of the CTGMIPD group and who underwent craniotomy for hematoma evacuation were enrolled in the standard craniotomy (SC) group. The primary outcome indicators were the 6-month mortality of the patients and the proportion of survivors with a modified Rankin Scale (mRS) scores of 1 or 2. The secondary outcome indicators were the cerebellar hematoma volume, National Institutes of Health Stroke Scale (NIHSS) score, Glasgow Coma Scale (GCS) score, incidence of postoperative complications, length of hospital stay, and medical costs. In addition, data concerning the patients who died during the study period were further analyzed. RESULTS: At the 6-month follow-up, there was no significant difference in mortality between the two groups, although the proportion of patients with an mRS scores of 1 or 2 was significantly higher in the CTGMIPD group when compared with the SC group (P = 0.015). No significant differences were observed in the hematoma volume, NIHSS score, and GCS score between the two groups. By contrast, the incidence of postoperative complications, length of hospital stay, and medical costs were significantly lower in the CTGMIPD group than in the SC group (all P < 0.05). When compared with the SC group, the proportion of dead patients with a hematoma volume greater than 30 ml was higher in the CTGMIPD group (P = 0.03). Moreover, after stratification of the patients with a preoperative GCS score ≤8, the CTGMIPD group had a significantly higher mortality rate than the SC group (P = 0.04). CONCLUSION: The efficacy of CT-guided MIPD in the treatment of cerebellar hemorrhage is close to that of craniotomy for hematoma excavation, although the complication and disability rates of the former are significantly lower than those of the latter. When the preoperative hematoma volume is less than 30 mL or the preoperative GCS score is greater than 8, CT-guided MIPD represents a better choice for the treatment of cerebellar hemorrhage than craniotomy for hematoma evacuation.
RESUMO
OBJECTIVES: This study aimed to investigate the correlation between serum lipoprotein-associated phospholipase A2 (Lp-PLA2) and poststroke mild cognitive impairment (PSMCI). METHODS: The patients included in the study were divided into PSMCI (68 cases) and cognitively normal (CN) (218 cases) groups and followed up for six months. Demographic and clinical data were collected. A logistic regression analysis was performed to determine whether Lp-PLA2 is an independent risk factor for PSMCI. Spearman's correlation analysis was used to examine the correlation between Lp-PLA2 levels and Montreal Cognitive Assessment (MoCA) scores. A receiver operating characteristic (ROC) curve analysis was performed to determine the diagnostic threshold value of Lp-PLA2 for PSMCI. RESULTS: Serum Lp-PLA2 levels were significantly higher in the PSMCI group than in the CN group. The logistic regression analysis showed that Lp-PLA2 was an independent risk factor for PSMCI (OR = 1.05, 95% CI = 1.03-1.07). Spearman's correlation analysis revealed a significant correlation between the Lp-PLA2 levels and MoCA scores (R = -0.49). The area under the ROC curve for Lp-PLA2 was 0.849, and the threshold value for PSMCI occurrence was 236.8 ng/ml. CONCLUSIONS: Elevated serum Lp-PLA2 is an independent risk factor for PSMCI and may serve as a potential biomarker for PSMCI.
Assuntos
1-Alquil-2-acetilglicerofosfocolina Esterase , Biomarcadores , Disfunção Cognitiva , Curva ROC , Acidente Vascular Cerebral , Humanos , Disfunção Cognitiva/sangue , Disfunção Cognitiva/etiologia , Disfunção Cognitiva/diagnóstico , Masculino , Feminino , 1-Alquil-2-acetilglicerofosfocolina Esterase/sangue , Idoso , Pessoa de Meia-Idade , Acidente Vascular Cerebral/sangue , Acidente Vascular Cerebral/complicações , Biomarcadores/sangue , Fatores de RiscoRESUMO
The single atom catalysts (SACs) show immense promise as catalytic materials. By doping the single atoms (SAs) of precious metals onto substrates, the atomic utilization of these metals can be maximized, thereby reducing catalyst costs. The electronic structure of precious metal SAs is significantly influenced by compositions of doped substrates. Therefore, optimizing the electronic structure through appropriate doping of substrates can further enhance catalytic activity. Here, Pt single atoms (Pt SAs) are doped onto transition metal sulfide substrate NiS2 (Pt SAs-NiS2) and phosphide substrate Ni2P (Pt SAs-Ni2P) to design and prepare catalysts. Compared to the Pt SAs-NiS2 catalyst, the Pt SAs-Ni2P catalyst exhibits better hydrogen evolution catalytic performance and stability. Under 1 M KOH conditions, the hydrogen evolution mass activity current density of the Pt SAs-Ni2P catalyst reaches 0.225 A mgPt-1 at 50 mV, which is 33 times higher than that of commercial Pt/C catalysts. It requires only 44.9 mV to achieve a current density of 10 mA cm-2. In contrast, for the Pt SAs-NiS2 catalyst, the hydrogen evolution mass activity current density is 0.178 A mgPt-1, requiring 77.8 mV to achieve a current density of 10 mA cm-2. Theoretical calculations indicate that in Pt SAs-Ni2P, the interaction between Pt SAs and the Ni2P substrate causes the Pt d-band center to shift downward, enhancing the H2O desorption and providing optimal H binding sites. Additionally, the hollow octahedral morphology of Ni2P provides a larger surface area, exposing more reactive sites and improving reaction kinetics. This study presents an effective pathway for preparing high-performance hydrogen evolution electrocatalysts by selecting appropriate doped substrates to control the electronic structure of Pt SAs.
RESUMO
A bifunctional catalyst used for urea oxidation-assisted hydrogen production can efficiently catalyze the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) simultaneously, thus simplifying electrolytic cell installation and reducing the cost. Constructing the heterointerface of two components or species and doping heteroatom are effective strategies to improve the performance of electrocatalysts, which could regulate the local electronic structure of the catalysts at their interface region, adjust their orbital overlap, and achieve enhanced catalytic performance. In this study, a simple hydrothermal method was studied for the preparation of B-doped Ni5P4/Ni2P heterostructures on nickel foam (B-Ni5P4/Ni2P@NF). Under 1 M KOH at a current density of 10 mA cm-2, an overpotential of 76 mV was obtained for the HER. When 0.3 M urea was added to 1 M KOH, the performance of the prepared catalyst was greatly improved. When the current density reached 10 mA cm-2, the potential was only 1.35 V. In addition, urea-assisted overall water splitting voltage was only 1.41 V. Thus, the B-Ni5P4/Ni2P catalyst possess excellent electrocatalytic activity. The main reason for the excellent properties of the electrocatalyst is the construction of heterostructure, which regulates the electronic structure of the catalyst at its interface and generates a new efficient active site. In addition, the doping of B atoms further promotes the charge transfer rate, thus strengthening the interaction between two phases and improving the catalytic performance. This study provides a simple, environmentally friendly, and rapid design method to prepare an active bi-functional electrocatalyst that has a positive effect on urea-assisted overall water splitting.
RESUMO
The purpose of this study was to determine the changes in teeth and hard tissues after preoperative modeling and bimaxillary anterior subapical osteotomy for the treatment of bimaxillary protrusion. Cephalometric analysis was used to evaluate the aesthetic effects and occlusal relationships obtained. The subjects included 19 women and 1 man (aged 19-41 years; average, 29 years) with bimaxillary protrusion who underwent anterior subapical osteotomy of both the maxilla and mandible, with simultaneous genioplasty, if required. Based on a preoperative computer-aided manufacturing/design-assisted and model surgical design and an occlusal guide plate, new occlusal relationships were established for the patients. In addition, the preoperative and postoperative cephalometric radiographs were systematically analyzed. In all patients, the surgical incisions underwent primary healing, with no infection or osteonecrosis. Significant differences were observed in the preoperative and postoperative values of all hard tissue and teeth parameters, except for SGn-FH degrees and Co-MP. The most obvious significant differences were seen in L1-OP°, Id-Pog-Go°, IIA°, U1E-Apog, L1E-Apog, U1E-NA, and L1-NA° (P < 0.001). Postoperative follow-up lasted for 12 to 36 months. All patients eventually achieved normal jaw relationships, tooth arch forms, and Spee curves. No evident irregularities of teeth arrangement or abnormal occlusal relationships were observed. All patients were satisfied with their postoperative facial appearance, except for 1 patient, who underwent repeat surgery because of relapse. With the use of a precise preoperative model surgical design, orthognathic surgery, a simple and time-saving technique, can be used to correct bimaxillary protrusion with satisfactory postoperative occlusal relationship and facial aesthetic appearance and minimal postoperative complications.
Assuntos
Má Oclusão/cirurgia , Mandíbula/cirurgia , Osteotomia Mandibular/métodos , Maxila/cirurgia , Osteotomia Maxilar/métodos , Terapia Assistida por Computador , Adulto , Cefalometria , Desenho de Equipamento/métodos , Feminino , Humanos , Processamento de Imagem Assistida por Computador , Masculino , Modelos Anatômicos , Planejamento de Assistência ao Paciente , Adulto JovemRESUMO
Modulation of the electronic interaction between the metal and support has been verified as a feasible strategy to improve the electrocatalytic performance of supported-type catalysts. Here, we have successfully synthesized an electrocatalyst of Ni2P nanoparticles (NPs) anchored on B, N co-doped graphite-like carbon nanosheets (Ni2P@B, N-GC), and elucidated the main mechanism by which B atoms doping enhances electrocatalytic hydrogen evolution reaction (HER) performance. The B atoms with electron-rich characteristic not only modulate the electronic structure on carbon skeleton, but also regulate the interfacial electronic interaction between Ni2P NPs and the carbon skeleton, which can lead to the increased available electron density of Ni sites. Such optimization is conducive to accelerating proton transfer and promoting reactive activity. As revealed, the Ni2P@B, N-GC catalyst with B atoms doping exhibits superior performance to the Ni2P@N-GC catalyst in acidic, neutral and alkaline medias. In addition, the assembled Ni(OH)2@B, N-GC||Ni2P@B, N-GC electrolyzer displays prominent overall water splitting performance in alkaline solution, which only demands 1.57 V to reach 10 mA/cm2, and in complicated natural seawater electrolyte, as low as 1.59 V. Hence, the B atoms doping strategy shows the significant enhancement for HER electrocatalysis.
RESUMO
Interface engineering is a method of enhancing catalytic activity while maintaining a material's surface properties. Thus, we explored the interface effect mechanism via a hierarchical structure of MoP/CoP/Cu3P/CF. Remarkably, the heterostructure MoP/CoP/Cu3P/CF demonstrates an outstanding overpotential of 64.6 mV at 10 mA cm-2 with a Tafel slope of 68.2 mV dec-1 in 1 M KOH. DFT calculations indicate that the MoP/CoP interface in the catalyst exhibited the most favorable H* adsorption characteristics (-0.08 eV) compared to the pure phases of CoP (0.55 eV) and MoP (0.22 eV). This result can be attributed to the apparent modulation of electronic structures within the interface domains. Additionally, the CoCH/Cu(OH)2/CFâMoP/CoP/Cu3P/CF electrolyzer demonstrates excellent overall water splitting performance, achieving 10 mA cm-2 in 1 M KOH solution with a modest voltage of only 1.53 V. This electronic structure adjustment via interface effects provides a new and efficient approach to prepare high-performance hydrogen production catalysts.
RESUMO
Among various methods of developing hydrogen energy, electrocatalytic water splitting for hydrogen production is one of the approaches to achieve the goal of zero carbon emissions. It is of great significance to develop highly active and stable catalysts to improve the efficiency of hydrogen production. In recent years, the construction of nanoscale heterostructure electrocatalysts through interface engineering can not only overcome the shortcomings of single-component materials to effectively improve their electrocatalytic efficiency and stability but also adjust the intrinsic activity or design synergistic interfaces to improve catalytic performance. Among them, some researchers proposed to replace the slow oxygen evolution reaction at the anode with the oxidation reaction of renewable resources such as biomass to improve the catalytic efficiency of the overall water splitting. The existing reviews in the field of electrocatalysis mainly focus on the relationship between the interface structure, principle, and principle of catalytic reaction, and some articles summarize the performance and improvement schemes of transition metal electrocatalysts. Among them, few studies are focusing on Fe/Co/Ni-based heterogeneous compounds, and there are fewer summaries on the oxidation reactions of organic compounds at the anode. To this end, this paper comprehensively describes the interface design and synthesis, interface classification, and application in the field of electrocatalysis of Fe/Co/Ni-based electrocatalysts. Based on the development and application of current interface engineering strategies, the experimental results of biomass electrooxidation reaction (BEOR) replacing anode oxygen evolution reaction (OER) are discussed, and it is feasible to improve the overall electrocatalytic reaction efficiency by coupling with hydrogen evolution reaction (HER). In the end, the challenges and prospects for the application of Fe/Co/Ni-based heterogeneous compounds in water splitting are briefly discussed.
RESUMO
It is unclear whether the United States Environmental Protection Agency (US EPA) method can accurately assess heavy metal risks in high-Se areas. Herein, a black shale outcropping in Enshi County, China, was taken as the study area, and a carbonate outcropping in Lichuan County was the control area. Selenium and associated heavy metal concentrations in rock, soil, rice, human blood and urine samples and human sensitive hepatic and renal biomarkers were measured. The results showed that the contents of selenium, cadmium, molybdenum and copper in the study area were 3.68 ± 2.72 µg/g, 2.65 ± 1.42 µg/g, 16.3 ± 15.5 µg/g, and 57.3 ± 17.6 µg/g, respectively, in soil (n = 47) and 1.072 ± 0.924 µg/g, 0.252 ± 0.310 µg/g, 2.800 ± 2.167 µg/g, and 10.91 ± 27.42 µg/g, respectively, in rice (n = 47). The daily adult intake levels of selenium, cadmium and molybdenum from rice consumption in the study area (exposure group) exceed the recommended tolerance values in China. According to the US EPA method, these environmental media pose a significant risk to human health. However, in the exposure group (n = 111), the median levels of the sensitive hepatic biomarkers alanine aminotransferase (18 U/L), aspartate aminotransferase (28 U/L) and total bilirubin (10.9 µmol/L) and the sensitive renal biomarkers serum creatinine (70.1 µmol/L), urinary nitrogen (5.73 mmol/L) and uric acid (303.80 µmol/L) were within reference ranges and had values equivalent to those of the control group (P > 0.05). The elements tended to differentiate during migration from one medium to another. Due to the complex interaction between selenium and heavy metals, a survey of human health indicators is indispensable when the US EPA method is used to assess the heavy metal risks in high-Se areas. The recommended molybdenum tolerable intake in the U.S. (2000 µg/d) is reasonable based on a comparison.