RESUMO
Exosomes are nanovesicles secreted by cells, which play a crucial role in various pathological processes. Exosomes have shown great promise as tumor biomarkers because of the abundant secretion during tumor formation. The development of a convenient, efficient, and cost-effective method for simultaneously enriching and detecting exosomes is of utmost importance for both basic research and clinical applications. In this study, an aptamer-functionalized magnetic Ti3C2 composite material (Fe3O4@Ti3C2@PEI@DSP@aptamer@FAM-ssDNA) is prepared for the simultaneous enrichment and detection of exosomes. CD63 aptamers are utilized to recognize and capture the exosomes, followed by magnetic separation. The exosomes are then released by cleaving the disulfide bonds of DSP. Compared to traditional methods, Fe3O4@Ti3C2@PEI@DSP@aptamer@FAM-ssDNA exhibited superior efficiency in enriching exosomes while preserving their structural and functional integrity. Detection of exosome concentration is achieved through the fluorescence quenching of Ti3C2 and the competitive binding between the exosomes and a fluorescently labeled probe. This method exhibited a low detection limit of 4.21 × 104 particles mL-1, a number that is comparable to the state-of-the-art method in the detection of exosomes. The present study demonstrates a method of simultaneous enrichment and detection of exosomes with a high sensitivity, accuracy, specificity, and cost-effectiveness providing significant potential for clinical research and diagnosis.
Assuntos
Aptâmeros de Nucleotídeos , Exossomos , Titânio , Exossomos/química , Exossomos/metabolismo , Aptâmeros de Nucleotídeos/química , Humanos , Titânio/químicaRESUMO
In the realm of photovoltaic research, 2D transition metal carbides (MXenes) have gained significant interest due to their exceptional photoelectric capabilities. However, the instability of MXenes due to oxidation has a direct impact on their practical applications. In this work, the oxidation process of Nb2CTx MXene in aqueous systems is methodically simulated at the atomic level and nanosecond timescales, which elucidates the structural variations influenced by the synergistic effects of water and dissolved oxygen, predicting a transition from metal to semiconductor with 44% C atoms replaced by O atoms in Nb2CTx. Moreover, Nb2CTx with varying oxidation degrees is utilized as electron transport layers (ETLs) in perovskite solar cells (PSCs). Favorable energy level alignments with superior electron transfer capability are achieved by controlled oxidation. By further exploring the composites of Nb2CTx to its derivatives, the strong interaction of the nano-composites is demonstrated to be more effective for electron transport, thus the corresponding PSC achieves a better performance with long-term stability compared with the widely used ETLs like SnO2. This work unravels the oxidation dynamics of Nb2CTx and provides a promising approach to designing ETL by exploiting MXenes to their derivatives for photovoltaic technologies.
RESUMO
Aqueous manganese ion batteries hold potential for stationary storage applications owing to their merits in cost, energy density, and environmental sustainability. However, the formidable challenge is the instability of metallic manganese (Mn) anodes in aqueous electrolytes due to severe hydrogen evolution reaction (HER), which is more serious than the commonly studied Zn metal anodes. Moreover, the mechanism of HER side reactions has remained unclear. Herein, we design a series of Mn-P alloying anodes by precisely regulating their energy band structures to mitigate the HER issue. It is found that the serious HER primarily originates from the spontaneous Mn-H2O reaction driven by the excessively high HOMO energy level of Mn, rather than electrocatalytic water splitting. Owing to a reduced HOMO energy level and enhanced electron escape work function, the MnP anode achieves an evidently enhanced cycle durability (over 1000 hours at a high current density of 5 mA cm-2). The MnP||AgVO full cell with an N/P ratio of 4 exhibits better rate capability and extended cycle life (7000 cycles) with minimal capacity degradation than the cell using metallic Mn anode (less than 100 cycles). This study provides a practical approach for developing highly durable aqueous Mn ion batteries.
RESUMO
Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti3 C2 Tx nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti3 C2 Tx composite has a high HER performance with 114â µmol/h/gcat , which is much higher than the BChl@Ti3 C2 Tx and Chl@Ti3 C2 Tx composites.
Assuntos
Bacterioclorofilas , Processos Fotoquímicos , Catálise , Clorofila , Hidrogênio/química , Água/químicaRESUMO
The Z-scheme process is a photoinduced electron-transfer pathway in natural oxygenic photosynthesis involving electron transport from photosystemâ II (PSII) to photosystemâ I (PSI). Inspired by the interesting Z-scheme process, herein a photocatalytic hydrogen evolution reaction (HER) employing chlorophyll (Chl) derivatives, Chl-1 and Chl-2, on the surface of Ti3 C2 Tx MXene with two-dimensional accordion-like morphology, forming Chl-1@Chl-2@Ti3 C2 Tx composite, is demonstrated. Due to the frontier molecular orbital energy alignments of Chl-1 and Chl-2, sublayer Chl-1 is a simulation of PSI, whereas upper layer Chl-2 is equivalent to PSII, and the resultant electron transport can take place from Chl-2 to Chl-1. Under the illumination of visible light (>420â nm), the HER performance of Chl-1@Chl-2@Ti3 C2 Tx photocatalyst was found to be as high as 143â µmol h-1 gcat -1 , which was substantially higher than that of photocatalysts of either Chl-1@Ti3 C2 Tx (20â µmol h-1 g-1 ) or Chl-2@Ti3 C2 Tx (15â µmol h-1 g-1 ).
Assuntos
Clorofila , Titânio , Hidrogênio , Complexo de Proteína do Fotossistema I/metabolismo , Complexo de Proteína do Fotossistema II/metabolismoRESUMO
The hopping charge transfer (CT) theory is used to explain the dynamics of traditional donor-acceptor (D-A) devices in organic solar cells (OSCs). But it is not applicable to the unconventional OSCs inspired by photosynthesis, referred to as Z-devices. In this study, we establish a universal heterojunction CT model in OSCs, based on the reported coherent CT in photosynthesis. Compared to the trade-off between energy loss and charge generation efficiency in the D-A device, we analyze its change in the Z-device. We introduce the "avalanche-like" CT of the Z-device induced by many-body Coulomb interaction and relevant experimental support. Combining with the Shockley-Queisser theory, we evaluate the theory limit power conversion efficiency of a D-A device and a Z-device. The Z-device has the potential to surpass the Shockley-Queisser limit of 33%.
RESUMO
The problems of resource depletion and environmental pollution caused by the excessive use of fossil fuels greatly restrict the rapid development of human technology and industry, which has led to a high demand for the development of new and clean energy sources. Hydrogen, due to its high calorific value and environmentally friendly combustion products, is undoubtedly a very promising energy carrier. The current methods of industrial hydrogen production are mainly water electrocatalytic decomposition or fossil fuels conversion, which also results in the waste of other energy sources. Since only one-step is involved during the conversion from solar to chemical energy and thus unnecessary energy waste is avoided, solar energy photocatalytic decomposition of water provides a more viable method for hydrogen production. The utilization of biohybrid molecules, which are widely available in nature and environmentally friendly, further reduce the cost of such photocatalytic systems. This Review discusses the research progress on hydrogen production using biohybrid molecules for photocatalytic hydrogen evolution. The basic reaction mechanism, general types and system structures about biohybrid molecule-based photocatalysts are summarized. The current challenges and prospects in the research of water splitting hydrogen evolution by biohybrid molecules photocatalysts are presented.
RESUMO
Ti3C2Tx MXene, a new family of 2D materials, has been successfully used as an ideal co-catalyst for enhancing photocatalytic activity due to its excellent physicochemical properties. Bacteriochlorophyll (BChl), one of the most abundant photosynthetically active pigments, has been studied in the field of artificial photosynthesis due to its constant and efficient absorption of solar energy and conversion of the excitation energy into chemical energy. In this work, five BChl-a derivatives with a range of different side chain groups in the C17 substituent were prepared and deposited on the Ti3C2Tx MXene surface by a solvent evaporation process to form BChl-n@Ti3C2Tx (n = 1â¼5) composite photocatalysts, which were used for the visible light-driven photocatalytic hydrogen evolution reaction (HER) in an aqueous solution. Among the five BChls investigated, BChl-5 possessing a quaternary ammonium terminal showed the best performance and BChl-5@Ti3C2Tx composite exhibited an excellent hydrogen production activity of as high as 51 µmol/h/gcat. This is primarily attributed to the excellent photophysical and photochemical properties provided by the self-aggregation of BChl-5 in the BChl-5@Ti3C2Tx composite and the outstanding charge transport capability of the 2D Ti3C2Tx MXene. At the same time, the fast carrier separation and transfer capability between BChl-5 and Ti3C2Tx provides reliable charge transport for photocatalytic HER.
RESUMO
The cerebrospinal fluid-contacting nucleus (CSF-CN) may influence actual composition of the CSF for non-synaptic signal transmission via releasing or absorbing bioactive substances, which distributes and localizes in the ventral periaqueductal central gray of the brainstem. Previous studies demonstrated that CSF-CN was involved in neuropathic pain and morphine dependence. Thus, to identify whether extracellular signal-regulated kinase 5 (ERK5) distributed in the CSF-CN and its function on the formation and development of morphine physical dependence, morphine withdrawal-like behavioral test and immunofluorescent technique were used in this research. Morphine was subcutaneously injected by an intermittent and escalating procedure to induce physical dependence, which was measured by withdrawal symptoms. In this study, we found that horseradish peroxidase-conjugated toxin subunit B/p-ERK5 double-labeled neurons expressed in the CSF-CN of normal rats. ERK5 signaling pathway was remarkably activated by naloxone-precipitated withdrawal in the CSF-CN. Moreover, selective attenuation of p-ERK5 expression in the CSF-CN by lateral ventricle injection of BIX02188 could significantly relieve morphine withdrawal symptom. These findings confirmed that the activation of p-ERK5 in the CSF-CN might contribute to morphine physical dependence.