Efficient Capture and Electroreduction of Dilute CO2 into Highly Pure and Concentrated Formic Acid Aqueous Solution.

High-purity CO2 rather than dilute CO2 (15 vol %, CO2/N2/O2 = 15:80:5, v/v/v) similar to the flue gas is currently used as the feedstock for the electroreduction of CO2, and the liquid products are usually mixed up with the cathode electrolyte, resulting in high product separation costs. In this work, we showed that a microporous conductive Bi-based metal-organic framework (Bi-HHTP, HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) can not only efficiently capture CO2 from the dilute CO2 under high humidity but also catalyze the electroreduction of the adsorbed CO2 into formic acid with a high current density of 80 mA cm-2 and a Faradaic efficiency of 90% at a very low cell voltage of 2.6 V. Importantly, the performance in a dilute CO2 atmosphere was close to that under a high-purity CO2 atmosphere. This is the first catalyst that can maintain exceptional eCO2RR performance in the presence of both O2 and N2. Moreover, by using dilute CO2 as the feedstock, a 1 cm-2 working electrode coating with Bi-HHTP can continuously produce a 200 mM formic acid aqueous solution with a relative purity of 100% for at least 30 h in a membrane electrode assembly (MEA) electrolyzer. The product does not contain electrolytes, and such a highly concentrated and pure formic acid aqueous solution can be directly used as an electrolyte for formic acid fuel cells. Comprehensive studies revealed that such a high performance might be ascribed to the CO2 capture ability of the micropores on Bi-HHTP and the lower Gibbs free energy of formation of the key intermediate *OCHO on the open Bi sites.

Continuously Producing Highly Concentrated and Pure Acetic Acid Aqueous Solution via Direct Electroreduction of CO2.

It is crucial to achieve continuous production of highly concentrated and pure C2 chemicals through the electrochemical CO2 reduction reaction (eCO2RR) for artificial carbon cycling, yet it has remained unattainable until now. Despite one-pot tandem catalysis (dividing the eCO2RR to C2 into two catalytical reactions of CO2 to CO and CO to C2) offering the potential for significantly enhancing reaction efficiency, its mechanism remains unclear and its performance is unsatisfactory. Herein, we selected different CO2-to-CO catalysts and CO-to-acetate catalysts to construct several tandem catalytic systems for the eCO2RR to acetic acid. Among them, a tandem catalytic system comprising a covalent organic framework (PcNi-DMTP) and a metal-organic framework (MAF-2) as CO2-to-CO and CO-to-acetate catalysts, respectively, exhibited a faradaic efficiency of 51.2% with a current density of 410 mA cm-2 and an ultrahigh acetate yield rate of 2.72 mmol m-2 s-1 under neutral conditions. After electrolysis for 200 h, 1 cm-2 working electrode can continuously produce 20 mM acetic acid aqueous solution with a relative purity of 95+%. Comprehensive studies revealed that the performance of tandem catalysts is influenced not only by the CO supply-demand relationship and electron competition between the two catalytic processes in the one-pot tandem system but also by the performance of the CO-to-C2 catalyst under diluted CO conditions.

Dicopper(I) Sites Confined in a Single Metal-Organic Layer Boosting the Electroreduction of CO2 to CH4 in a Neutral Electrolyte.

It is challenging and important to achieve high performance for an electrochemical CO2 reduction reaction (eCO2RR) to yield CH4 under neutral conditions. So far, most of the reported active sites for eCO2RR to yield CH4 are single metal sites; the performances are far below the commercial requirements. Herein, we reported a nanosheet metal-organic layer in single-layer, namely, [Cu2(obpy)2] (Cuobpy-SL, Hobpy = 1H-[2,2']bipyridinyl-6-one), possessing dicopper(I) sites for eCO2RR to yield CH4 in a neutral aqueous solution. Detailed examination of Cuobpy-SL revealed high performance for CH4 production with a faradic efficiency of 82(1)% and a current density of ∼90 mA cm-2 at -1.4 V vs. reversible hydrogen electrode (RHE). No obvious degradation was observed over 100 h of continuous operation, representing a remarkable performance to date. Mechanism studies showed that compared with the conventional single-copper sites and completely exposed dicopper(I) sites, the dicopper(I) sites in the confined space formed by the molecular stacking have a strong affinity to key C1 intermediates such as *CO, *CHO, and *CH2O to facilitate the CH4 production, yet inhibiting C-C coupling.

Nonlinear Optical Glass-Ceramic From a New Polar Phase-Transition Organic-Inorganic Hybrid Crystal.

Melt-quenched glasses of organic-inorganic hybrid crystals, i.e., hybrid glasses, have attracted increasing attention as an emerging class of hybrid materials with beneficial processability and formability in the past years. Herein, we present a new hybrid crystal, (Ph3 PEt)3 [Ni(NCS)5 ] (1, Ph3 PEt+ =ethyl(triphenyl)phosphonium), crystallizing in a polar space group P1 and exhibiting thermal-induced reversible crystal-liquid-glass-crystal transitions with relatively low melting temperature of 132 °C, glass-transition temperature of 40 °C, and recrystallization on-set temperature of 78 °C, respectively. Taking advantage of such mild conditions, we fabricated an unprecedented hybrid glass-ceramic thin film, i.e., a thin glass uniformly embedding inner polar micro-crystals, which exhibits a much enhanced intrinsic second-order nonlinear optical effect, being ca. 25.6 and 3.1 times those of poly-crystalline 1 and KH2 PO4 , respectively, without any poling treatments.

Simultaneous Capture of CO2 Boosting Its Electroreduction in the Micropores of a Metal-organic Framework.

Integration of CO2 capture capability from simulated flue gas and electrochemical CO2 reduction reaction (eCO2 RR) active sites into a catalyst is a promising cost-effective strategy for carbon neutrality, but is of great difficulty. Herein, combining the mixed gas breakthrough experiments and eCO2 RR tests, we showed that an Ag12 cluster-based metal-organic framework (1-NH2 , aka Ag12 bpy-NH2 ), simultaneously possessing CO2 capture sites as "CO2 relays" and eCO2 RR active sites, can not only utilize its micropores to efficiently capture CO2 from simulated flue gas (CO2 : N2 =15 : 85, at 298 K), but also catalyze eCO2 RR of the adsorbed CO2 into CO with an ultra-high CO2 conversion of 60 %. More importantly, its eCO2 RR performance (a Faradaic efficiency (CO) of 96 % with a commercial current density of 120 mA cm-2 at a very low cell voltage of -2.3 V for 300 hours and the full-cell energy conversion efficiency of 56 %) under simulated flue gas atmosphere is close to that under 100 % CO2 atmosphere, and higher than those of all reported catalysts at higher potentials under 100 % CO2 atmosphere. This work bridges the gap between CO2 enrichment/capture and eCO2 RR.

A Porous π-π Stacking Framework with Dicopper(I) Sites and Adjacent Proton Relays for Electroreduction of CO2 to C2+ Products.

Crystalline porous materials sustained by supramolecular interactions (e.g., π-π stacking interactions) are a type of molecular crystals showing considerable stability, but their applications are rarely reported due to the high difficulty of their construction. Herein, a stable π-π stacking framework formed by a trinuclear copper(I) compound [Cu3(HBtz)3(Btz)Cl2] (CuBtz, HBtz = benzotriazole) with pyrazolate-bridged dicopper(I) sites is reported and employed for electrochemical CO2 reduction, showing an impressive performance of 73.7 ± 2.8% Faradaic efficiency for C2+ products [i.e., ethylene (44%), ethanol (21%), acetate (4.7%), and propanol (4%)] with a current density of 7.9 mA cm-2 at the potential of -1.3 V versus RHE in an H-type cell and a Faradic efficiency (61.6%) of C2+ products with a current density of ≈1 A cm-2 and a reaction rate of 5639 µmol m-2 s-1 at the potential of -1.6 V versus RHE in a flow cell device, representing an impressive performance reported to date. In-situ infrared spectroscopy, density functional theory calculations, and control experiments revealed that the uncoordinated nitrogen atoms of benzotriazolates in the immediate vicinity can act as proton relays and cooperate with the dicopper(I) site to promote the hydrogenation process of the *CO intermediate and the C-C coupling, resulting in the highly selective electroreduction of CO2 to C2+ products.

A Stable and Conductive Covalent Organic Framework with Isolated Active Sites for Highly Selective Electroreduction of Carbon Dioxide to Acetate.

Electroreduction of CO2 to acetate provides a promising strategy to reduce CO2 emissions and store renewable energy, but acetate is usually a by-product. Here, we show a stable and conductive two-dimensional phthalocyanine-based covalent-organic framework (COF) as an electrocatalyst for reduction of CO2 to acetate with a single-product Faradaic efficiency (FE) of 90.3(2)% at -0.8 V (vs. RHE) and a current density of 12.5 mA cm-2 in 0.1 M KHCO3 solution. No obvious degradation was observed over 80 hours of continuous operation. Combined with the comparison of the properties of other catalysts with isolated metal active sites, theoretical calculations and in situ infrared spectroscopy revealed that the isolated copper-phthalocyanine active site with high electron density is conducive to the key step of C-C coupling of *CH3 with CO2 to produce acetate, and can avoid the coupling of *CO with *CO or *CHO to produce ethylene and ethanol.

Single-Product Faradaic Efficiency for Electrocatalytic of CO2 to CO at Current Density Larger than 1.2†A cm-2 in Neutral Aqueous Solution by a Single-Atom Nanozyme.

Electroreduction of CO2 to CO is a promising approach for the cycling use of CO2 , while it still suffers from impractical current density and durability. Here we report a single-atom nanozyme (Ni-N5 -C) that achieves industrial-scale performance for CO2 -to-CO conversion with a Faradaic efficiency (FE) exceeded 97 % over -0.8--2.4 V vs. RHE. The current density at -2.4 V vs. RHE reached a maximum of 1.23 A cm-2 (turnover frequency of 69.7 s-1 ) with an FE of 99.6 %. No obvious degradation was observed over 100 hours of continuous operation. Compared with the planar Ni-N4 site, the square-pyramidal Ni-N5 site has an increase and a decrease in the d z 2 ${{{\rm d}}_{{z}^{2}}}$ and dxz/yz orbital energy levels, respectively, as revealed by density functional theory calculations. Thus, the Ni-N5 catalytic site is more superior to activate CO2 molecule and reduce the energy barriers as well as promote the CO desorption, thus boosting the kinetic activation process and catalytic activity.

Highly Selective CO2 Electroreduction to C2H4 Using a Metal-Organic Framework with Dual Active Sites.

Conversion from CO2 to C2H4 is important for the development of energy and the environment, but the high energy barrier of hydrogenation of the *CO intermediate and C-C coupling step tend to result in C1 compounds as the main product and thus restrict the generation of C2H4. Here, we report a metal-organic framework (denoted as PcCu-Cu-O), composed of 2,3,9,10,16,17,23,24-octahydroxyphthalo-cyaninato)copper(II) (PcCu-(OH)8) ligands and the square-planar CuO4 nodes, as the electrocatalyst for CO2 to C2H4. Compared with the discrete molecular copper-phthalocyanine (Faradaic efficiency (FE) of C2H4 = 25%), PcCu-Cu-O exhibits much higher performance for electrocatalytic reduction of CO2 to C2H4 with a FE of 50(1)% and a current density of 7.3 mA cm-2 at the potential of -1.2 V vs RHE in 0.1 M KHCO3 solution, representing the best performance reported to date. In-situ infrared spectroscopy and control experiments suggested that the enhanced electrochemical performance may be ascribed to the synergistic effect between the CuPc unit and the CuO4 unit, namely the CO on the CO-producing site (CuO4 site) can efficiently migrate and dimerize with the *CO intermediate adsorbed on the C2H4-producing site (CuPc), giving a lower C-C dimerization energy barrier.

Electrostatic Attraction-Driven Assembly of a Metal-Organic Framework with a Photosensitizer Boosts Photocatalytic CO2 Reduction to CO.

Reducing CO2 into fuels via photochemical reactions relies on highly efficient photocatalytic systems. Herein, we report a new and efficient photocatalytic system for CO2 reduction. Driven by electrostatic attraction, an anionic metal-organic framework Cu-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) as host and a cationic photosensitizer [Ru(phen)3]2+ (phen = 1,10-phenanthroline) as guest were self-assembled into a photocatalytic system Ru@Cu-HHTP, which showed high activity for photocatalytic CO2 reduction under laboratory light source (CO production rate of 130(5) mmol g-1 h-1, selectivity of 92.9%) or natural sunlight (CO production rate of 69.5 mmol g-1 h-1, selectivity of 91.3%), representing the remarkable photocatalytic CO2 reduction performance. More importantly, the photosensitizer [Ru(phen)3]2+ in Ru@Cu-HHTP is only about 1/500 in quantity reported in the literature. Theoretical calculations and control experiments suggested that the assembly of the catalysts and photosensitizers via electrostatic attraction interactions can provide a better charge transfer efficiency, resulting in high performance for photocatalytic CO2 reduction.

Efficient electroreduction of CO to acetate using a metal-azolate framework with dicopper active sites.

Electrochemical reduction of CO to value-added products, especially C2 products, provides a potential approach to achieve carbon neutrality and overcome the energy crisis. Herein, we report a metal-azolate framework (CuBpz) with dicopper active sites as an electrocatalyst for the electrochemical CO reduction reaction (eCORR). As a result, CuBpz achieved an impressive faradaic efficiency (FE) of 47.8% for yielding acetate with a current density of -200 mA cm-2, while no obvious degradation was observed over 60 hours of continuous operation at a current density of -200 mA cm-2. Mechanism studies revealed that the dicopper site can promote C-C coupling between two C1 intermediates, thereby being conducive to the generation of the key *CH2COOH intermediate.

Rational Design of Metal-Organic Frameworks for Electroreduction of CO2 to Hydrocarbons and Carbon Oxygenates.

Since CO2 can be reutilized by using renewable electricity in form of product diversity, electrochemical CO2 reduction (ECR) is expected to be a burgeoning strategy to tackle environmental problems and the energy crisis. Nevertheless, owing to the limited selectivity and reaction efficiency for a single component product, ECR is still far from a large-scale application. Therefore, designing high performance electrocatalysts is the key objective in CO2 conversion and utilization. Unlike most other types of electrocatalysts, metal-organic frameworks (MOFs) have clear, designable, and tunable catalytic active sites and chemical microenvironments, which are highly conducive to establish a clear structure-performance relationship and guide the further design of high-performance electrocatalysts. This Outlook concisely and critically discusses the rational design strategies of MOF catalysts for ECR in terms of reaction selectivity, current density, and catalyst stability, and outlines the prospects for the development of MOF electrocatalysts and industrial applications. In the future, more efforts should be devoted to designing MOF structures with high stability and electronic conductivity besides high activity and selectivity, as well as to develop efficient electrolytic devices suitable for MOF catalysts.

A Cu(111)@metal-organic framework as a tandem catalyst for highly selective CO2 electroreduction to C2H4.

Here, we report an improved tandem catalytic mechanism for electroreduction of CO2 to C2H4. Cu(111) nanoparticles with an average size of 5.5 ± 0.9 nm were anchored on a conductive Cu-based metal-organic framework (Cu-THQ) by in situ electrochemical synthesis. Compared to Cu(111) nanoparticles, the C2H4 faradaic efficiency of the tandem catalyst Cu(111)@Cu-THQ was increased doubly.