Optimization of microemulsion cleaning sludge conditions using response surface method.

Microemulsion cleaning method has been proved to be an effective way to clean oily sludge with low interfacial tension and high solubilizing ability for non-miscible liquids. In this paper, the percentage range of the microemulsion in the formulation was obtained by studying phase behavior of the microemulsion. The response surface method was used to model and optimize the microemulsion to obtain the best formulation: n-BuOH content at 9.89%, NaCl content at 2.24% and AES/APG ratio at 3.75, and the oil removal rate reached 97.28%. Meanwhile, the cleaning conditions of oil sludge were also optimized by the response surface method and the optimal cleaning parameters were determined as liquid-solid ratio at 4.2, stirring rate at 157 r·min-1, and stirring time at 38 min. In addition, some experiments were carried out to confirm the simulation results, affording the oil removal rate of 98.79%. SEM and FTIR confirmed that the oil on the sludge can be removed by microemulsion.

Organic Phosphorescence Lasing Based on a Thermally Activated Delayed Fluorescence Emitter.

Organic phosphorescence materials provide an opportunity to use triplets for lasing. However, population inversion based on phosphorescence is hard to establish, owing to low luminescent quantum efficiency and intensive optical loss. By comparison, thermally activated delayed fluorescence emitters exhibit excellent optical gain with the aid of the reverse intersystem crossing (RISC) process. In this work, we designed a multifunctional gain material, not only serving as a thermally activated delayed fluorescence (TADF) emitter with excellent optical gain but also working as a phosphorescence source with high utilization of triplets. The lone pair of electrons in oxygen substitutions promotes a fast spin-flip and high delayed fluorescence quantum yield (ΦDF = 55%), enabling TADF amplified spontaneous emissions (ASE) of CH2Cl2 solution. Single-crystalline nanowires of H-aggregates effectively lower triplet energy levels with high phosphorescence quantum yield (ΦP = 27%), demonstrating Fabry-Perot mode phosphorescence lasing at 630 nm.

Converting 2D inorganic-organic ZnSe-DETA hybrid nanosheets into 3D hierarchical nanosheet-based ZnSe microspheres with enhanced visible-light-driven photocatalytic performances.

Engineering two-dimensional (2D) nanosheets into three-dimensional (3D) hierarchical structures is one of the great challenges in nanochemistry and materials science. We report a facile and simple chemical conversion route to fabricate 3D hierarchical nanosheet-based ZnSe microspheres by using 2D inorganic-organic hybrid ZnSe-DETA (DETA = diethylenetriamine) nanosheets as the starting precursors. The conversion mechanism involves the controlled depletion of the organic-component (DETA) from the hybrid precursors and the subsequent self-assembly of the remnant inorganic-component (ZnSe). The transformation reaction of ZnSe-DETA nanosheets is mainly influenced by the concentration of DETA in the reaction solution. We demonstrated that this organic-component depletion method could be extended to the synthesis of other hierarchical structures of metal sulfides. In addition, the obtained hierarchical nanosheet-based ZnSe microspheres exhibited outstanding performance in visible light photocatalytic degradation of methyl orange and were highly active for photocatalytic H2 production.

Conversion of CuO nanoplates into porous hybrid Cu2O/polypyrrole nanoflakes through a pyrrole-induced reductive transformation reaction.

Porous hybrid Cu2O/polypyrrole nanoflakes have been synthesized from solid CuO nanoplate templates through the pyrrole-induced reductive transformation reaction at elevated temperature. The conversion mechanism involves the reductive transformation of CuO to Cu2O and the in situ oxidative polymerization of pyrrole to polypyrrole. In addition, the morphology of the as-converted nanohybrids depends on the shape of the CuO precursors. The strategy enables us to transform single-crystalline CuO nanosheets into hollow hybrid Cu2O/polypyrrole nanoframes. The ability to transform CuO and an organic monomer into porous hybrid materials of conducting polymer and Cu2O with macrosized morphological retention opens up interesting possibilities to create novel nanostructures. Electrochemical examinations show that these porous hybrid Cu2O/polypyrrole nanostructures exhibit efficient catalytic activity towards oxygen reduction reaction (ORR), excellent methanol tolerance ability, and catalytic stability in alkaline solution, thus making them promising nonprecious-metal-based catalysts for ORR in alkaline fuel cells and metal-air batteries.