[Clinical and biological features and prognosis of patients with leukemic non-nodal mantle cell lymphoma].

Objective: To investigate the clinical, biological and prognostic characteristics of leukemic non-nodal mantle cell lymphoma (nnMCL). Methods: The clinical data of 14 patients with nnMCL and 238 patients with classical mantle cell lymphoma (cMCL) in Blood Diseases Hospital, Chinese Academy of Medical Sciences from November 2000 to October 2020 were retrospectively analyzed. Among the 14 patients with nnMCL, there were 9 males and 5 females, with the age [M (Q1, Q3)] of 57.5 (52.3, 67.0) years. Among the 238 patients with cMCL, there were 187 males and 51 females, with the age of 58.0 (51.0, 65.3) years. The clinical and biological characteristics of the two groups were recorded and compared. Follow-up and efficacy evaluation were conducted by re-examination during hospital stay and telephone follow-up and so on. Results: The proportion of CD200 expression in nnMCL patients was 8/14, which was higher than that in cMCL patients [14.6% (19/130)] (P=0.001). The proportion of CD23 expression in nnMCL patients was 8/14, which was higher than that in cMCL patients [13.5% (23/171)] (P<0.001). The proportion of CD5 expression in nnMCL patients was 10/14, which was lower than that in cMCL patients [97.4% (184/189)] (P=0.001). The proportion of CD38 expression in nnMCL patients was 4/14, which was lower than that in cMCL patients [69.6% (112/161)] (P=0.005). The expression proportion of sex-determining region of Y chromosome-related high-mobility-group box 11 (SOX11) in nnMCL patients was 1/5, which was lower than that in cMCL patients [77.9% (60/77)] (P=0.014). The proportion of immunoglobulin heavy chain variable region (IGHV) mutations in nnMCL patients was 11/11, which was higher than that in cMCL patients [26.0% (13/50)] (P<0.001). As of April 11, 2021, the follow-up time for nnMCL and cMCL patients was 31 (8-89) months and 48 (0-195) months, respectively. Among the 14 nnMCL patients, 6 patients were still under observation, and 8 patients were treated. The overall response rate (ORR) was 8/8, including 4 patients with complete remission and 4 patients with partial response. The median overall survival and median progression-free survival were not reached in nnMCL patients. In the cMCL group, 50.0% (112/224) patients achieved a complete response, 24.6% (55/224) patients achieved a partial response, and ORR was 74.6% (167/224). There was no statistically significant difference in ORR between the two groups (P=0.205). Conclusions: nnMCL patients have an indolent progression, with higher expression rates of CD23 and CD200 and lower expression rates of SOX11, CD5 and CD38. Most patients have IGHV mutations, with a relatively good prognosis, and"watch and wait"approach is an optional treatment.

Efficient high-charge Laguerre-Gaussian mode conversion by using a periscopic axicon mirror.

Laguerre-Gaussian (LG) modes can be converted from fundamental Gaussian mode by using phase optical elements such as spiral phase plates (SPP), but the conversion efficiency is strongly reduced in high charge plates because of the transverse intensity deviation. In this paper, a three-step scheme is proposed to dramatically improve the conversion efficiency. First, a fundamental Gaussian beam is converted to a 1st-order LG beam via a 1st-order SPP and a spatial filtering system. Then, by using a periscopic axicon mirror (PAM), the lst-order LG beam is transformed into an annular beam with larger beam radius. Finally, by using a second high-order SPP, this intensity-matched ring beam can be effectively converted to a high-charge LG0l beam. Through optimization of the PAM's parameter, the total conversion efficiency from fundamental Gaussian beam to LG0l mode as high as 91.85% is obtained, which is much higher than the case without PAM. Numerical simulations are carried out by the particle-in-cell (PIC) code EPOCH to verify the effectiveness of the scheme.

Chrysin induces osteogenic differentiation of human dental pulp stem cells.

OBJECTIVES: As an ideal cell source for tissue engineering and bone defect repair, dental pulp stem cells (DPSCs) have good osteogenic differentiation potential. Chrysin, a flavonoid extracted from oroxylum seeds, has been proven to promote bone formation of bone marrow stem cells. However, the effect of chrysin on osteogenic differentiation of DPSCs remains unclear. This study aimed to investigate the role of Chrysin in promoting osteogenic differentiation of DPSCs and in DPSC-based bone formation. MATERIAL AND METHODS: We investigated the effects of chrysin on DPSCs from patients by CCK-8 assay, Alizarin Red S staining, qPCR and Western blotting. The effects of chrysin on DPSC-based bone formation in a heterotopic osteogenesis model in nude mice and a rat calvarial defect model were also performed. Finally, we investigated the mechanism of chrysin-treated DPSCs by proteomics. RESULTS: Chrysin upregulated the expression of osteogenic proteins and induced osteogenic differentiation of DPSCs. Moreover, chrysin induced abundant ß-TCP-induced formation of mineralized bone tissue and promoted DPSC-based bone formation in a heterotopic osteogenesis model in nude mice and a rat calvarial defect model. Proteomics showed that upregulation of the Smad3 was closely related to osteogenic differentiation. Inhibiting of Smad3 activation by a Smad3 inhibitor could reverse the chrysin-mediated increases in the expression levels of osteogenic genes and osteogenic induction of DPSCs. CONCLUSIONS: Our study implies the intriguing potential of chrysin-treated DPSCs in bone regeneration and bone defect repair.

[Clinical application of LASEREO endoscopic system in early gastric cancer].

Objective: To evaluate the clinical application of LASEREO endoscopic system in early gastric cancer (EGC). Methods: A total of 68 patients diagnosed with EGC were retrospectively analyzed between August 2017 to December 2020 in Fuding Hospital Affiliated to Fujian University of Traditional Chinese Medicine. There were 50 males and 18 females finally enrolled with a median age of 64 years. EGCs were analyzed from subjective and objective aspect, as well as from magnification and non-magnification status. Six endoscopists evaluated the visibility of the EGC (RSC) and calculated the color difference (ΔEC) between EGC and the surrounding mucosa in white light imaging (WLI), blue light imaging-bright (BLI-Bri) and linked color imaging (LCI) modes. In the case of magnification (×80), the visibility of the microstructures and microvessels (RSV) was analyzed and the color difference (ΔEV) between microvessels and non-vessels areas were calculated in WLI, BLI and LCI modes. The visibility was evaluated using visibility ranking scale(RS) and the color difference (ΔE) was calculated using L*a*b* color space. Results: In WLI, BLI-Bri, and LCI modes, the mean (±SD) RSC were 2.56±0.68, 2.63±0.59 and 3.17±0.50, and the mean(±SD) ΔEC were 15.71±5.58, 12.04±3.73, and 22.84±8.46, respectively, which in LCI were higher than those in WLI and BLI-Bri modes (P<0.001).Regarding the data evaluated by senior endoscopists, the RSC was higher in BLI-Bri than that in WLI mode (2.98±0.58 vs. 2.79±0.73, P<0.001), but as to those evaluated by junior endoscopists, there were no significant differences between the WLI and BLI-Bri modes(2.29±0.72 vs. 2.23±0.72,P =0.218).In magnifying endoscopy with WLI, BLI, and LCI modes, the mean(±SD) RSV were 2.95±0.28, 3.46±0.40, and 3.38±0.33, and the mean (±SD) ΔEV were 21.68±7.52, 44.29±10.94, and 45.38±14.29, respectively.The RSV and ΔEV in LCI and BLI were higher than that in WLI mode (P<0.001). Conclusions: LCI improves the visibility of EGC by increasing ΔEC, especially in junior endoscopists. Both BLI and LCI improve the visibility of microstructures and microvessels under magnification.

Direct acceleration of collimated monoenergetic sub-femtosecond electron bunches driven by a radially polarized laser pulse.

High-quality ultrashort electron beams have diverse applications in a variety of areas, such as 4D electron diffraction and microscopy, relativistic electron mirrors and ultrashort radiation sources. Direct laser acceleration (DLA) mechanism can produce electron beams with a large amount of charge (several to hundreds of nC), but the generated electron beams usually have large divergence and wide energy spread. Here, we propose a novel DLA scheme to generate high-quality ultrashort electron beams by irradiating a radially polarized laser pulse on a nanofiber. Since electrons are continuously squeezed transversely by the inward radial electric field force, the divergence angle gradually decreases as electrons transport stably with the laser pulse. The well-collimated electron bunches are effectively accelerated by the circularly-symmetric longitudinal electric field and the relative energy spread also gradually decreases. It is demonstrated by three-dimensional (3D) simulations that collimated monoenergetic electron bunches with 0.75° center divergence angle and 14% energy spread can be generated. An analytical model of electron acceleration is presented which interprets well by the 3D simulation results.

Parameterized Analysis of Craniocerebral Injury Caused by Fist.

ABSTRACT: Objective Based on the theory of biomechanics, the finite element method was used to study the injury characteristics of different parts of brain hit by fist with different force and to predict the risk of craniocerebral injury, in order to provide reference for actual medical protection and forensic identification. Methods The finite element model of fist was constructed by using DICOM data modeling method and related software, and the effective mass and speed of fist were used to represent the kinetic energy of fist, and combined with human finite element model THUMS 4.02, the characteristics of craniocerebral injury caused by frontal and lateral blows were parametrically simulated. Results The probability of direct death from a blow to the head was low, but as fist power increased, so did the risk of craniocerebral injury. The characteristics of craniocerebral injury were also significantly different with the different fist hitting head locations. When the frontal area was attacked, the maximum equivalent stress of skull was 122.40 MPa, while that of brain tissue was 4.31 kPa. When the temporal area was attacked, the maximum equivalent stress of skull was 71.53 MPa, while that of brain tissue was 7.09 kPa. Conclusion The characteristics and risks of skull fracture and brain tissue injury are different when different parts of the brain are hit by fist. When the frontal area is hit, the risk of skull fracture is significantly higher than when the temporal area is hit. The risk of brain tissue injury is the opposite. The position with the highest probability of skull fracture is generally the place where the skull is directly impacted, and with the conduction of stress waves, it will spread to other parts of the skull, while the position with the highest risk of brain tissue injury is not the place where the brain is directly impacted.

[Evaluation of clinical efficacy of a kind of digital complete denture].

OBJECTIVE: To compare the clinical efficacy of a kind of complete dentures fabricated using computer aided design/computer aided manufacturing (CAD/CAM) workflow with that of the complete denture fabricated using conventional workflow. METHODS: Twenty edentulous patients were included in this prospective, single-blind, self-controlled clinical trial. Two pairs of complete dentures were fabricated for each participant: one using the functional suitable denture (FSD) system with CAD/CAM, and the other using conventional fabrication workflow. In the final delivery appointment, the conventional dentures worn by the participant for 3 months at first. Then the participant swapped to wear digital denture for another 3 months. The patients' satisfaction and oral health related quality of life (OHRQoL) were measured using the visual analogue scale (VAS) and oral health impact profile (OHIP-20E) at baseline, 2 weeks, 1 month, 2 months, and 3 months following denture delivery. In addition, the masticatory efficiency of each pair of dentures was measured after three months adaptation period for each type of dentures. RESULTS: The VAS scores of the twenty patients in FSD denture group on general satisfaction, ease of cleaning, ability to speak, esthetics, stability and oral health status on these six domains were higher than that of conventional denture group 3 months after delivery. While the VAS cores in FSD denture group on comfort, ability to chew and ability to chew up were the same as those of conventional denture group. But there was no significant difference (P>0.05). The VAS score on each domain in FSD denture group was higher than that of conventional denture group 3 months after delivery, three domains of which reached statistical significance (P < 0.05), involving functional limitation, psychological discomfort and total. The masticatory performance of the FSD denture (1.20±0.54) was slightly higher than that for the conventional denture (1.16±0.53), but the difference did not reach statistical significance (P=0.691). CONCLUSIONS: The clinical efficacy of the FSD complete denture is comparable to that of the conventional complete denture. As for patient satisfaction and oral health related quality of life, FSD dentures received comparable scores as conventional complete dentures did.

[Analysis of Influencing Factors of Single Camera Photogrammetry in Forensic Three-Dimensional Reconstruction].

ABSTRACT: Objective To evaluate the influence of factors such as the selection of equipment, focal length and the selection of reconstruction quality in the reconstruction software on the reconstruction results of single camera photogrammetry and provide reference for the forensic application of single camera photogrammetry. Methods The 19 skulls were measured by traditional measurement method and single camera photogrammetry. The differences between the two measurement methods and within the group with same equipment but different focal length were analyzed. One skull and one corpse were selected as the research objects. According to the reconstruction quality selection conditions in the photogrammetric software, the experimental group was divided into five grades. The model reconstructed by optical scanner was defined as reference model, while the model reconstructed by single camera photogrammetry was defined as test model. The test model was aligned with the reference model, 3D deviation analysis was carried out and the mean error and root mean square （RMS） values were calculated. Results The differences between EOS 7D zoom group and traditional measurement, and within the group with same equipment had statistical significance （P<0.05）. The mean error value and minimum RMS value of the skull reconstructed by single camera photogrammetry and the three-dimensional model of the corpse existed in the medium quality group, and the trend was basically the same. Conclusion The equipment and focal length has no obvious influence on the results of single camera photogrammetry. Lower reconstruction quality can easily cause distortion, while higher reconstruction quality can easily generate noise, so medium quality is preferred.

Exploring of the Mechanism of Rib Fracture Caused by Landing on Different Parts of the Trunk after Falls from Height Using Finite Element Method.

ABSTRACT: Objective To study the mechanism of rib fracture caused by landing on different parts of the trunk using finite element method, and to provide some new techniques and new ideas for the reconstruction of the whole process of falls from height. Methods The finite element method was used to study the rib fracture of human security model THUMS4.0 caused by landing on different parts of the trunk. Then the model was compared with actual cases and the mechanism of rib fracture caused by falls from height was analyzed from a biomechanical point of view. Results There were some differences in the stress and strain distribution as well as the rib fracture sites when different parts touched the ground. Ribs on both sides of the body were fractured when the front of the trunk touched the ground, and the fractures were mainly located in the junction of the ribs and costal cartilage and the midaxillary line area. When the right anterior part of the trunk touched the ground, rib fracture occurred first on the side that touched the ground, and rib fractures were mainly located in the area from the right midaxillary line to the posterior axillary line, and junction of ribs on both sides and costal cartilage. When the back of the trunk touched the ground, the fracture sites were mainly located on the back of the ribs on both sides. When the right posterior part of the trunk touched the ground, multiple rib fractures were likely to occur in the parts that touched the ground. The plastic strains were mainly concentrated at the fracture sites, while the von Mises stresses were not only concentrated at the fracture sites, but also at other sites. Conclusion There are some differences in rib fracture location sites and injury mechanisms when different parts of the trunk touch the ground.

Evaluation of 3D Measuring Methods for Body Surface Damage and Scars.

ABSTRACT: Objective To assess the accuracy and reliability of the two 3D measuring methods, structured-light scanning and single-camera photogrammetry in forensic body surface damage and scar measurement. Methods The measuring results of 86 injuries by the ruler method, structured-light scanning and single-camera photogrammetry were compared and evaluated. The area measuring results of 13 simulated scars by the structured-light scanning, single-camera photogrammetry, Photoshop lasso pixel method and PDF reading software were compared and evaluated. The time consumed was recorded. The known specification information of the stickers was used as the standard value to compare the measuring accuracy of the ruler method, structural-light scanning and single-camera photogrammetry, and to calculate the root mean square error （RMSE）. The consistency evaluation of intraclass correlation coefficient （ICC） for the repeatability of 3 measuring results obtained by different operators and the same operator. Results The differences in results of the two 3D measuring methods and the ruler method had no statistical significance; the differences between measuring results made by the structured-light scanning, single-camera photogrammetry and PDF reading software and that of the Photoshop lasso pixel method had no statistical significance. The post-processing of the single-camera photogrammetry consumed more time than that of other methods. When the long-distance group （10-40 cm） was measured, the results obtained by the ruler method were shorter than the standard value. The RMSE value results were structured-light scanning < single-camera photogrammetry < ruler method. The ICC value intragroup and intergroup were greater than 0.99. Conclusion Both structured-light scanning and single-camera photogrammetry can be applied in recording and measuring forensic body surface damage. The former has better performance in measurement accuracy and stability, while the latter has better color performance but longer post-processing time.

[Research Status of Postmortem MSCT Angiography in Forensic Science].

ABSTRACT: Virtual autopsy is a new technique for investigating the morphological changes of cadaveric tissues and organs by medical imaging technology. It has been widely used in the identification of causes of death. Multislice spiral computed tomography （MSCT） has become a routine inspection method in some identification institutions, although it cannot completely replace traditional autopsy, it plays a key auxiliary or substitute role in the identification of certain abnormal causes of death. Plain MSCT scan cannot visualize cadaveric vessels, but can perform cadaveric angiography to determine vascular injury or disease. This technology has entered a rapid development period in recent years, and has made a considerable progress in contrast agent, perfusion methods and imaging methods. This article summarizes several common cadaveric MSCT angiography methods, such as systemic angiography, angiography through cardiopulmonary resuscitation, targeted angiography, and angiography by cardiac puncture, and analyzes and compares the application prospects.

Application of Virtual Anatomy Technology in Postmortem Examination of Medical Dispute Cases.

ABSTRACT: Objective To discuss the application value of CT scanning technology in cause of death determination of medical dispute cases. Methods From July 2017 to December 2018, postmortem CT imaging data of 12 medical dispute cases were collected. CT imaging diagnosis results and anatomy findings as well as differences between antemortem and postmortem CT diagnosis were compared. The advantages and disadvantages of CT routine tests of the cadavers in terms of the diagnosis of disease and damage were analyzed. Results The comparison between CT imaging diagnosis and anatomical findings showed that CT scans had advantages in the diagnosis of disease and damage with large differences in density changes, such as atelectasis, pneumonia, calcification, fracture and hemorrhage, etc. The comparison of CT diagnosis in antemortem and postmortem examination showed that the cadavers of medical dispute cases were well preserved and that postmortem CT scan was meaningful for the diagnosis of antemortem diseases. Conclusion Virtual anatomy technology has a relatively high application value in postmortem examination of medical dispute cases. It can provide effective information for the appraisers before the autopsy and can also provide a reference for cause of death analysis when the anatomy cannot be performed.

Performance of Arma chinensis reared on an artificial diet formulated using transcriptomic methods.

An artificial diet formulated for continuous rearing of the predator Arma chinensis was inferior to natural prey when evaluated using life history parameters. A transcriptome analysis identified differentially expressed genes in diet-fed and prey-fed A. chinensis that were suggestive of molecular mechanisms underlying the nutritive impact of the artificial diet. Changes in the diet formulation were made based on the transcriptome analysis and tested using life history parameters. The quantity of pig liver, chicken egg, tuna fish, biotin, nicotinamide, vitamin B6, thiamine, riboflavin, vitamin C, L-glutamine, and sucrose was reduced, and wheat germ oil, calcium pantothenate and folic acid were increased. Ecuadorian shrimp was added as a partial substitute for tuna fish. Several parameters improved over six generations, including increased egg viability, and decreased egg and adult cannibalism. Additionally, several parameters declined, including longer developmental times for 2nd-5th instars, and decreased nymphal weights. The improvements in life history parameters support the use of transcriptome analyses to help direct formulation improvements. However, the decline in some parameters suggests that additional information, e.g., proteomic data, may be useful as well to maximize diet formulations.

[Glucagon-like peptide-1 regulates lipid metabolism in hepatocytes through Foxo1/3].

Objective: Glucagon-like peptide-1 (GLP-1) has been reported to be effective in the treatment of nonalcoholic fatty liver disease (NAFLD). However, the molecular mechanism of GLP-1 on NAFLD is remained unclear. The present study was to detect whether the effect of GLP-1 on triglyceride (TG) content in hepatocytes is dependent on Foxos. Methods: HepG2 cells were treated with palmitic/oleic acid for 24 h. The knockdown of Foxo1, Foxo3 was conducted through small interfering RNA (siRNA). Real time PCT (RT-PCR) was used to detect the changes of the SREBP1c and Acox2 genes in HepG2 cells after Foxo1/3 knockdown. Results: As expected, palmitic/oleic acid increased TG concentration in HepG2 cells [(12.65 ± 1.32) µg/mg vs. (4.32±0.54) µg/mg, P<0.05]. Addition of GLP-1 dose (10, 50, 100nmol/L) dependently lowered the TG content and reached plateau at 100 nmol/L of GLP-1 [TG(8.38±1.47) µg/mg]. The GLP-1 effect on TG remained after knocking down either Foxo1 [(9.09±1.34)µg/mg] or Foxo3 [(8.90±1.60) µg/mg] alone, but not when knocking down Foxo1 and Foxo3 (Foxo1/3) together [(14.66±1.77)µg/mg]. Moreover, knocking down Foxo1/3 also abolished GLP-1 effect on SREBP1c and Acox2 expression. Conclusion: GLP-1 can inhibit the synthesis of TG in hepatocytes depending on Foxo1 and Foxo3. Further studies are needed to explore the specific mechanisms.

[The correlation between findings of whole-body diffusion weighted imaging and clinical result in patients with multiple myeloma].

Objective: To explore the relationship between the findings of whole body diffusion weighted imaging (WBDWI) and the clinical result in patients with multiple myeloma. Methods: A total of 43 cases of multiple myeloma patients were retrospectively collected from May 2015 to May 2017 in Tianjin First Central Hospital.Twenty-nine cases were male and 14 were female. The median age was 54 years old with a range from 36 to 73 years old. The patients were divided into two groups with and without abnormal findings pending on whole body diffusion weighted imaging. The clinical data and the ADC value were compared between the two groups, as well as comparison in patients with abnormal findings between pre-and post-treatment. Results: In 43 patients, normal findings on WBDWI were found in 10 cases, 7 males, 3 females, age (59±9) years old, and abnormal findings in 33 cases, 22 males, 11 females, age (57±10) years old.No statistical differences of age and gender were found between two groups (P>0.05) .The ratio of plasma cells and the proportion of ß(2) microspheres in patients with abnormal WBDWI (50.0% (14.0%, 78.0%) , 4.8 (2.7, 7.7) mg/L)were significantly higher than those in the normal group(5.0% (2.5%, 15.0%) , 2.4 (2.0, 3.7) mg/L) (P<0.05).ADC value in different body parts of abnormal group including costal ((0.66±0.15)×10(-3) mm(2)/s), sternal bone((0.71±0.20)×10(-3) mm(2)/s), clavicles((0.67±0.17)×10(-3) mm(2)/s), thoracic vertebra((0.63±0.17)×10(-3) mm(2)/s), lumber vertebra((0.69±0.20)×10(-3) mm(2)/s), pelvic((0.83±0.36)×10(-3) mm(2)/s), proximal humerus((0.76±0.13)×10(-3) mm(2)/s), proximal femur((0.64±0.17)×10(-3) mm(2)/s), shaft of femur((0.70±0.22)×10(-3) mm(2)/s), proximal tibia((0.97±0.18)×10(-3) mm(2)/s), shaft of tibia((0.83±0.18)×10(-3) mm(2)/s) which were significantly higher than those of normal group (all P<0.05). The albumin concentration of the patients after treatment was significantly higher than those before treatment (P<0.05). Conclusion: Different imaging findings on WBDWI can reflect clinical different result in patients with multiple myeloma, and when WBDWI is normal, the clinical symptoms are mild. When abnormal findings detected on WBDWI, the clinical symptoms are still severe although albumin concentration increased after treatment.

Characteristic Changes and 3D Virtual Measurement of Lung CT Image Parameters in the Drowning Rabbit Model.

OBJECTIVES: To use virtual anatomy technique in the analysis of post-mortem characteristic changes of CT images in the experimental drowning rabbit model and the related parameters in 3D virtual model, so as to explore its application value in the diagnosis of drowning in forensic pathology. METHODS: A model of drowning rabbits was established, with animal models of hemorrhagic shock and mechanical asphyxia as the controls. CT scan was performed on the experimental animals, and the differences in imaging features between the groups were compared by morphological reading of the tomographic images. CT data were imported into Mimics 14.0 software for 3D modeling. The CT values and lung volumes were calculated by the software, and the differences on CT values and lung volumes brought by different causes of death were analyzed. RESULTS: The CT images of lungs in the drowning group showed characteristic ground-glass opacity （diffuse and uniform density increase）. There were no obvious abnormalities in hemorrhagic shock group, and only a few similar changes were found in the mechanical asphyxia group. Compared with the controls, the CT values and the lung volumes in the drowning group were significantly increased P<0.05. CONCLUSIONS: Based on post-mortem lung imaging, the combination of CT value and lung volume changes can effectively reflect the virtual anatomical features in drowning, and provide a diagnostic basis for the forensic identification of drowning.

Research Progress on Postmortem Changes of Computed Tomography Imaging Characteristics on Corpses.

ABSTRACT: Postmortem changes on corpses appear immediately after death, and can transform the original structure characteristics of the corpse to different degrees as well as show specific changes on computed tomography （CT） images, sometimes with false positives and false negatives, influencing the identification of injuries or diseases. This paper systematically summarizes the postmortem changes of computed tomography imaging characteristics on corpses, to further expand the application of virtopsy in the practices of forensic pathology identification, and provide reference for the identification of injuries, diseases and changes after normal death.

A polymorphic MYC response element in KBTBD11 influences colorectal cancer risk, especially in interaction with an MYC-regulated SNP rs6983267.

Background: MYC is a well-established cancer driver gene regulating the expression of numerous genes, indicating that polymorphisms in MYC response elements could affect tumorigenesis through altering MYC regulation. We performed integrative multistage study to evaluate the effects of variants in MYC response elements and colorectal cancer (CRC) risk. Patients and methods: We systematically integrated ChIP-Seq, DNase-Seq and transcription factor motif data to screen variants with potential ability to affect the MYC binding affinity. Then, we conducted a two-stage case-control study, totally consisting of 4830 CRC cases and 4759 controls in Chinese population to identify risk polymorphisms and interactions. The effects of risk variants were confirmed by functional assays in CRC LoVo, SW480 and HCT15 cells. Results: We identified a novel polymorphism rs11777210 in KBTBD11 significantly associated with CRC susceptibility (P = 2.43 × 10-12). Notably, we observed a significant interaction between rs11777210 and MYC nearby rs6983267 (P-multi = 0.003, P-add = 0.005), subjects carrying rs6983267 GG and rs11777210 CC genotypes showing higher susceptibility to CRC (2.83-fold) than those carrying rs6983267 TT and rs11777210 TT genotypes. We further demonstrated that rs6983267 T > G increased MYC expression, and MYC bound to and negatively regulated KBTBD11 expression when the rs11777210 C risk allele was present. KBTBD11 was downregulated in tumor tissues, and KBTBD11 knockdown promoted cell proliferation and inhibited cell apoptosis. Conclusion: The rs11777210 is a potential predictive biomarker of CRC susceptibility, and KBTBD11 functions as a putative tumor suppressor in tumorigenesis. Our study highlighted the high CRC risk of people carrying rs6983267 G and rs11777210 C alleles, and provided possible biological mechanism of the interaction.