Prediction of superconductivity in sandwich XB4 (X = Li, Be, Zn and Ga) films.

Borophenes and 2D boron allotropes are metallic and exhibit a BCS superconducting state, unlike graphene. In-plane stretching vibrational modes in bulk MgB2 boron layers induce phonon-mediated superconductivity. However, the effect of stretching vibrational phonon modes on transition temperature (Tc) still requires further investigations. Here, we use first-principles calculations combined with conventional BCS theory to explore the superconducting properties in a series of dynamically stable boron-based sandwich films that have not been realized experimentally. The sandwich films of XB4 (where X = Li, Be, Zn, Ga) are predicted to exhibit good phonon-mediated superconductivity with high Tc values of 25.1 K, 28.7 K, 38.7 K, and 36.2 K, respectively. The origin of the superconducting states is mainly caused by the high metallicity and strong electron-phonon coupling (EPC), which can be attributed to the presence of intercalated atoms within the borophene layers. It is further demonstrated in the XB4 compounds (where X = Li, Be, Zn, Ga) that the pronounced EPC is not solely attributable to the in-plane vibrations of B atoms, but it is also influenced significantly by the out-of-plane vibrations of B atoms. Sandwich (Li,Be,Zn,Ga)B4 films may be a great choice for nanoscale superconductors as the electron-phonon coupling parameter becomes greater than unity, thereby providing a powerful approach for investigating these systems with high critical temperatures.

Facile Pressure-Sensitive Capacitive Touch Keypad for a Green Intelligent Human-Machine Interface.

There is a great demand for human-machine interfaces (HMIs) in emerging electronics applications. However, commercially available plastic-based HMIs are primarily rigid, application-specific, and hard to recycle and dispose of due to their non-biodegradability. This results in electronic and plastic waste, potentially damaging the environment by ending up in landfills and water resources. This work presents a green, capacitive pressure-sensitive (CPS), touch sensor-based keypad as a disposable, wireless, and intelligent HMI to mitigate these problems. The CPS touch keypads were fabricated through a facile green fabrication process by direct writing of graphite-on-paper, using readily available materials such as paper and pencils, etc. The interdigitated capacitive (IDC) touch sensors were optimized by analyzing the number of electrode fingers, dimensions, and spacing between the electrode fingers. The CPS touch keypad was customized to wirelessly control a robotic arm's movements based on the touch input. A low-pressure touch allows slow-speed robotic arm movement for precision movements, and a high-pressure touch allows high-speed robotic arm movement to cover the large movements quickly. The green CPS touch keypad, as a disposable wireless HMI, has the potential to enforce a circular economy by mitigating electronic and plastic waste, which supports the vision of a sustainable and green world.

Garage-Fabricated, Ultrasensitive Capacitive Humidity Sensor Based on Tissue Paper.

The role of humidity sensors in different industries and field applications, such as agriculture, food monitoring, biomedical equipment, heating, and ventilation, is well known. However, most commercially available humidity sensors are based on polymers or electronic materials that are not degradable and thus contribute to electronic waste. Here, we report a low-cost, flexible, easy-to-fabricate, and eco-friendly parallel-plate capacitive humidity sensor for field applications. The sensor is fabricated from copper tape and tissue paper, where copper tape is used to create the plates of the capacitor, and tissue paper is used as a dielectric sensing layer. Along with the low cost, the high sensitivity, better response and recovery times, stability, and repeatability make this sensor unique. The sensor was tested for relative humidity (RH), ranging from 40% to 99%, and the capacitance varied linearly with RH from 240 pF to 720 pF, as measured by an Arduino. The response time of the sensor is ~1.5 s, and the recovery time is ~2.2 s. The experiment was performed 4-5 times on the same sensor, and repeatable results were achieved with an accuracy of ±0.1%. Furthermore, the sensor exhibits a stable response when tested at different temperatures. Due to the above advantages, the presented sensor can find ready applications in different areas.

Optimal sequencing of enzalutamide and abiraterone acetate plus prednisone in metastatic castration-resistant prostate cancer: a multicentre, randomised, open-label, phase 2, crossover trial.

BACKGROUND: Abiraterone acetate plus prednisone and enzalutamide are both used for the treatment of metastatic castration-resistant prostate cancer. We aimed to determine the best sequence in which to use both drugs, as well as their second-line efficacy. METHODS: In this multicentre, randomised, open-label, phase 2, crossover trial done in six cancer centres in British Columbia, Canada, we recruited patients aged 18 years or older with newly-diagnosed metastatic castration-resistant prostate cancer without neuroendocrine differentiation and Eastern Cooperative Oncology Group performance status 2 or less. Patients were randomly assigned (1:1) using a computer-generated random number table to receive either abiraterone acetate 1000 mg orally once daily plus prednisone 5 mg orally twice daily until PSA progression followed by crossover to enzalutamide 160 mg orally once daily (group A), or the opposite sequence (group B). Treatment was not masked to investigators or participants. Primary endpoints were time to second PSA progression and PSA response (≥30% decline from baseline) on second-line therapy, analysed by intention-to-treat in all randomly assigned patients and in patients who crossed over, respectively. The trial is registered with ClinicalTrials.gov, NCT02125357. FINDINGS: Between Oct 21, 2014, and Dec 13, 2016, 202 patients were enrolled and randomly assigned to either group A (n=101) or group B (n=101). At the time of data cutoff, 73 (72%) patients in group A and 75 (74%) patients in group B had crossed over. Time to second PSA progression was longer in group A than in group B (median 19·3 months [95% CI 16·0-30·5] vs 15·2 months [95% CI 11·9-19·8] months; hazard ratio 0·66, 95% CI 0·45-0·97, p=0·036), at a median follow-up of 22·8 months (IQR 10·3-33·4). PSA responses to second-line therapy were seen in 26 (36%) of 73 patients for enzalutamide and three (4%) of 75 for abiraterone (χ2 p<0·0001). The most common grade 3-4 adverse events throughout the trial were hypertension (27 [27%] of 101 patients in group A vs 18 [18%] of 101 patients in group B) and fatigue (six [10%] vs four [4%]). Serious adverse events were reported in 15 (15%) of 101 patients in group A and 20 (20%) of 101 patients in group B. There were no treatment-related deaths. INTERPRETATION: Enzalutamide showed activity as a second-line novel androgen receptor pathway inhibitor, whereas abiraterone acetate did not, leading to a longer time to second PSA progression for the sequence of abiraterone followed by enzalutamide than with the opposite treatment sequence. Our data suggest that using a sequencing strategy of abiraterone acetate followed by enzalutamide provides the greatest clinical benefit. FUNDING: Canadian Cancer Society Research Institute, Prostate Cancer Canada, Movember Foundation, Prostate Cancer Foundation, Terry Fox New Frontiers Program, BC Cancer Foundation, Jane and Aatos Erkko Foundation, Janssen, and Astellas.

Clinical effectiveness of docetaxel for castration-sensitive prostate cancer in a real-world population-based analysis.

BACKGROUND: Adding docetaxel to androgen deprivation therapy (ADT) for the treatment of metastatic castration-sensitive prostate cancer (mCSPC) has known efficacy, with an overall survival benefit in Phase III clinical trials. The effectiveness of docetaxel with ADT in the general patient population remains undefined. PATIENTS AND METHODS: We conducted a population-based retrospective review using the British Columbia Provincial Pharmacy Database. To be included, patients had to have castration-sensitive prostate cancer not previously treated (except in the adjuvant setting) and have received at least one cycle of docetaxel, with complete records available for review. Safety and clinical effectiveness were evaluated. RESULTS: From April 2015 to February 2017, we identified 183 cases; 156 met inclusion criteria. Most patients had high-volume disease (80%). All 6 planned docetaxel cycles were delivered in 126 cases (81%). Dose reductions and delays were required in 39% and 16% of cases. Grade 3-4 adverse events were noted in 40%, with no treatment-related deaths. The rate of febrile neutropenia was 18% and was significantly associated with the presence of high-volume disease (P = 0.038). PSA ≤ 0.2 ng/L was achieved in 27% of patients after 6 months of ADT and maintained in 16% after 12 months. Patients with over 20 bone metastases had worse time to castration resistant prostate cancer (CRPC) and time to treatment for CRPC, and a trend toward worse overall survival. CRPC developed in 41% within 1 year, with a median time to CRPC of 14.4 months. Treatment for CRPC was given in 84 cases, with 90% receiving either abiraterone or enzalutamide in the first-line, with a PSA decline ≥50% occurring in 47%. CONCLUSIONS: The effectiveness of docetaxel with ADT in a general population of patients with mCSPC was associated with poorer outcomes and high rates of toxicity compared to the published studies. Response rates to first-line treatment for mCRPC with abiraterone or enzalutamide appear similar to reported outcomes.

A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes.

The world water resources are contaminated due to discharge of a large number of pollutants from industrial and domestic sources. A variety of a single and multiple units of physical, chemical, and biological processes are employed for pollutants removal from wastewater. Adsorption is the most widely utilized process due to high efficiency, simple procedure and cost effectiveness. This paper reviews the research work carried out on the use of geopolymer materials for the adsorption of heavy metals and dyes. Geopolymers possess good surface properties, heterogeneous microstructure and amorphous structure. The performance of geopolymers in the removal of heavy metals and dyes is reported comparable to other materials. The pseudo-second order kinetics and Langmuir isotherm models mostly fit to the adsorption data suggesting homogeneous distribution of adsorption sites with the formation of monolayer adsorbate on the surface of geopolymers. Adsorption of heavy metals and dyes onto geopolymers is spontaneous, endothermic and entropy driven process. Future research should focus on the enhancement of geopolymer performance, testing on pollutants other than heavy metals and dyes, and verification on real wastewater in continuous operation.

Trimetallic PtCoFe Alloy Monolayer Superlattices as Bifunctional Oxygen-Reduction and Ethanol-Oxidation Electrocatalysts.

A synthesis strategy for the preparation of trimetallic PtCoFe alloy nanoparticle superlattices is reported. Trimetallic PtCoFe alloy monolayer array of nanoparticle superlattices with a large density of high index facets and platinum-rich surface are successfully prepared by coreduction of metal precursors in formamide solvent. The concentration of cetyl trimethyl ammonium bromide plays a vital role for the formation of a monolayer array of nanoparticle superlattices, while the size of nanoparticles is determined by NaI. The prepared monolayer array of nanoparticle superlattices is the superior catalyst for oxygen reduction reaction as well as for ethanol oxidation owing to their specific structural and compositional characteristics.

Navigating board dynamics: Configuration analysis of corporate governance's factors and their impact on bank performance.

This research utilizes the fsQCA technique to investigate how a combination of corporate governance conditions or factors collectively influences the performance of banks. Examining key elements such as board size, busy directors, independent directors, CEO duality, and women on the board, the research employs data collected from the annual reports of 30 banks spanning from 2010 to 2020. The necessary condition analysis (NCA) underscores that no individual condition or factor is indispensable for the ultimate outcome. Nevertheless, the sufficiency analysis reveals distinct solutions, each representing a unique set of conditions or factors sufficient to generate the outcome. The study concludes that the relationship between corporate governance characteristics and bank performance is complex and multifaceted, with neither ROA nor ROE reliant on a singular input condition or factor. The theoretical contributions of the findings align with or partially support various theories and propositions within the realm of corporate governance. Notably, the application of fsQCA contributes to enhance the methodological understanding of corporate governance studies in existing literature.

Comparative effectiveness of intra-articular therapies in knee osteoarthritis: a meta-analysis comparing platelet-rich plasma (PRP) with other treatment modalities.

Introduction: Knee osteoarthritis (KOA) is a progressive joint disease commonly treated with intra-articular injections, including platelet-rich plasma (PRP), hyaluronic acid (HA), or corticosteroids (CS). This updated meta-analysis aims to enhance the statistical power of the results and provide comprehensive clinical evidence that reflects the most current research. By doing so, the authors aim to suggest a reliable estimate for the development of guidelines, addressing the pressing need for effective and minimally invasive treatment options. Methods: PubMed, Scopus, clinicaltrials.gov, Cochrane Central were searched until March 2023, for randomized controlled trials (RCTs) comparing the effectiveness of intra-articular injectable therapies, including PRP, HA, CS, and placebo, in KOA. Data extraction involved baseline characteristics and outcome measures [Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores, Visual Analog Scale (VAS) pain scores, KOOS, and IKDC scores] at 1, 3, 6 and 12 months. Statistical analysis, including subgroup analysis, assessment of heterogeneity, and publication bias, was conducted using Review Manager. Results: Our meta-analysis of 42 studies involving 3696 patients demonstrated that PRP treatment resulted in significant pain relief compared to HA injections, as evidenced by improved WOMAC pain (MD: -0.74; 95% CI: -1.02 to -0.46; P≤0.00001; I 2=94%) and VAS pain (MD: -0.65; 95% CI: -1.24 to -0.06; P=0.03; I2=97%) outcomes. Similarly, PRP showed greater efficacy in reducing WOMAC pain (MD: -8.06; 95% CI: -13.62 to -2.51: P=0.004; I 2=96%) and VAS pain (MD: -1.11; 95% CI: -1.64 to -0.59; P≤0.0001; I 2=68%) compared to CS injections, with the most significant improvement observed at 6 months. Conclusions: PRP is an effective treatment for KOA. It provides symptomatic relief, has the potential to reduce disease progression, and has sustained effects up to 12 months. PRP offers superior pain relief and functional enhancement compared to CS and HA injections.

2D Materials in Advanced Electronic Biosensors for Point-of-Care Devices.

Since two-dimensionalal (2D) materials have distinct chemical and physical properties, they are widely used in various sectors of modern technologies. In the domain of diagnostic biodevices, particularly for point-of-care (PoC) biomedical diagnostics, 2D-based field-effect transistor biosensors (bio-FETs) demonstrate substantial potential. Here, in this review article, the operational mechanisms and detection capabilities of biosensing devices utilizing graphene, transition metal dichalcogenides (TMDCs), black phosphorus, and other 2D materials are addressed in detail. The incorporation of these materials into FET-based biosensors offers significant advantages, including low detection limits (LOD), real-time monitoring, label-free diagnosis, and exceptional selectivity. The review also highlights the diverse applications of these biosensors, ranging from conventional to wearable devices, underscoring the versatility of 2D material-based FET devices. Additionally, the review provides a comprehensive assessment of the limitations and challenges faced by these devices, along with insights into future prospects and advancements. Notably, a detailed comparison of FET-based biosensors is tabulated along with various other biosensing platforms and their working mechanisms. Ultimately, this review aims to stimulate further research and innovation in this field while educating the scientific community about the latest advancements in 2D materials-based biosensors.

Prediction of plasma ctDNA fraction and prognostic implications of liquid biopsy in advanced prostate cancer.

No consensus strategies exist for prognosticating metastatic castration-resistant prostate cancer (mCRPC). Circulating tumor DNA fraction (ctDNA%) is increasingly reported by commercial and laboratory tests but its utility for risk stratification is unclear. Here, we intersect ctDNA%, treatment outcomes, and clinical characteristics across 738 plasma samples from 491 male mCRPC patients from two randomized multicentre phase II trials and a prospective province-wide blood biobanking program. ctDNA% correlates with serum and radiographic metrics of disease burden and is highest in patients with liver metastases. ctDNA% strongly predicts overall survival, progression-free survival, and treatment response independent of therapeutic context and outperformed established prognostic clinical factors. Recognizing that ctDNA-based biomarker genotyping is limited by low ctDNA% in some patients, we leverage the relationship between clinical prognostic factors and ctDNA% to develop a clinically-interpretable machine-learning tool that predicts whether a patient has sufficient ctDNA% for informative ctDNA genotyping (available online: https://www.ctDNA.org ). Our results affirm ctDNA% as an actionable tool for patient risk stratification and provide a practical framework for optimized biomarker testing.

Digitalized world and carbon footprints: does digitalization really matter for sustainable environment?

There is a growing demand for energy to support economic and social development. There will be many shifts in the energy sector as a result of digitization. Hence, we aim analyzing the linkage between digitalization and environment sustainability by incorporating energy consumption as a moderating factor using data of UK from 1990 to 2020. Different dimensions of digitalization are used as explanatory variables, ecological and carbon footprints are used as outcomes and energy consumption is used as moderator. The findings of autoregressive distributed lag model show that internet users and technological advancement (fixed telephone subscription and mobile cellular) are negatively (positively) linked with ecological and carbon footprints. Energy consumption causes to enhance ecological and carbon footprints and plays an antagonistic role in the nexus of internet users, technological advancement, and ecological and carbon footprints. The effects of mobile cellular and fixed telephone subscription have increased in the presence of energy consumption as moderator which exhibits that energy consumption plays an enhancing role in the links between mobile cellular, fixed telephone subscription and ecological and carbon footprints. The results underscore the importance of taking a holistic approach to addressing the environmental impact of digital technologies. By promoting sustainable communication practices and investing in the development of more energy-efficient technologies, practitioners, managers, and society as a whole can work together to reduce the carbon and ecological footprints of digital technologies and create a more sustainable future for all.

Increasing ecological sustainability using the combinations of technologies to produce power.

The study attempts to analyze the impact of hybrid energy systems on environmental sustainability in the context of the circular economy network. The hybrid energy sources follow the principle of circular economy, which aims to reduce raw material use and waste which is very fruitful in promoting environmental sustainability. However, the study uses quarterly data from Pakistan from 2011Q1 to 2020Q4 to accomplish the proposed study objective. The study constructs 5 hybrid systems of energy to analyze the impact and applies Auto Regressive Distributive Lag Model (ARDL) to estimate the results. It is found that electricity generation through solar photovoltaic (SPV), wind turbine (WND), hydroelectricity (HYDE) and nuclear power generation (NPG) play a positive role in increasing environment sustainability. The results explain that SPV, NPG, and HYDE contribute 2.29%, 2.04%, and 0.42% to environmental sustainability, respectively. Hybrid systems of energy (Hybrid 1,2,3,4 and 5) positively impact ecological sustainability, but the intensity of each hybrid system in sustaining the environment is different. Among five hybrid systems, the hybrid-5 (SPV-WND-HYDE-NPG) energy system is more environmentally friendly and has the highest contribution towards environmental sustainability. The study suggests incorporating hybrid energy systems provides the means of transition toward a circular economy, ultimately promoting ecological sustainability. The study proposes to the officials of the Pakistani government and policymakers to initiate effective policies to encourage hybrid energy systems because the significance of hybrid systems ensures a low carbon economy and makes a path towards sustainable economic development.

Behavioural Phenomena of Family Firm Control Diversity and R&D Investment with Moderating Role CEO Compensation.

Purpose: The novel study describes the behXavioural phenomena of family firm types and explores the relationship between the family firm types of control diversity and Research and Development (R&D) investments. Acquiring controlling rights is a psychological phenomenon for family firm owners. The moderating effect of CEO compensations on R&D investments is investigated. Methodology: We collected data of listed A-share family firms in China from 2011 to 2020 in the China Stock Market and Accounting Research database. We used Tobit regression for data analysis. Results/Finding: The study concludes that lone-controller family firms (LCFFs) are less willing to invest in R&D and multi-controller family firms (MCFFs) have positive behaviour towards R&D. The moderating role of CEO compensation deviates the willingness and behaviour to invest in R&D. Conclusion/Originality: To the best of our knowledge, this study is the first to outline the paradoxical empirical evidence on family firms and R&D investments by analysing control diversity and how the moderating role of CEO compensation nexus can alter willingness towards R&D. The study is a novel attempt following De Massis et al's framework to test the willingness and ability of LCFFs and MCFFs. Previous studies based on agency theory have tacitly assumed that ability and willingness exist in family-controlled firms. However, this study challenges this implicit assumption.

Invisible touch sensors-based smart and disposable door locking system for security applications.

Nowadays, security is one of the living essentials, and there is a dire need for reliable, secure, and smarter locking systems. The stand-alone smart security systems are of great interest as they do not involve keys, cards, or unsecured communication in order to prevent carrying, loss, duplication, and hacking. Here, we report an invisible touch sensors-based smart door locking system (DLS). The passive transducer-based touch sensors are fabricated through a facile do-it-yourself (DIY) based fabrication process by pasting the hybrid geometry copper electrodes on cellulose paper. The employment of biodegradable, and non-toxic materials like paper and copper tape makes this configuration a good candidate for green electronics. For additional security, the keypad in the DLS is made invisible by covering it with paper and spray paint. One can only open the door by knowing the password as well as the location of each key on the sensor keypad. The system can efficiently recognize the exact pattern of passwords without any false values. Invisible touch sensors-based locking systems can easily contribute to the security applications in homes, banks, automobiles, apartments, lockers, and cabinets.

Paper-based facile capacitive touch arrays for wireless mouse cursor control pad.

Wireless devices have become extremely inexpensive and popular in recent years. The two most significant advantages of wireless devices over wired ones are convenience and flexibility. Considering this, a wireless mouse pad prototype for access has been developed in this study. A capacitive sensors-based mouse pad with basic operations and conventional features has been developed using sensing arrays on paper. A facile, do-it-yourself fabrication process was utilized to develop a cost-effective, thin, wearable, and cleanroom-free wireless mouse cursor control (MCC) pad. The ablation process was used to cut the traces of conductive tape and paste them onto the paper to develop the MCC pad. The pad was connected with Espressif Systems (ESP)32 to wirelessly control the cursor of mobile and laptop. The capacitive touch sensor array-based pad is easy to reproduce and recycle. This pad can contribute to future advancements in thin human-machine interfaces, soft robotics, and medical and healthcare applications.

Fast Response Facile Fabricated IDE-Based Ultra-sensitive Humidity Sensor for Medical Applications.

An eco-friendly, biodegradable, flexible, and facile fabricated interdigital electrode-based capacitive humidity sensor with applications in health and medicine has been reported here. Several sensors use copper tape as electrodes on the polyethylene terephthalate (PET) substrate, with non-woven paper as the sensing layer. Two different configurations of sensors were tested, i.e., with and without pores in the PET substrate. The sensing performance of both sensors has been tested for relative humidity ranging from 35 to 100% at temperatures ranging from 20 to 50 °C. The capacitance of the sensor varies linearly in response to the change in humidity. The sensor with pores shows a response from 28 to 630 pF as the humidity varied from 35 to 100%, whereas the sensor without pores responded from 22 to 430 pF. The response and recovery times of the fabricated sensor are observed as ∼2.4, and ∼1.8 s, respectively, and the sensitivity is 9.67 pF/% RH. The sensors are tested multiple times, and repeatable results are achieved each time with an accuracy of ±0.22%. Further, the sensor's response is also stable for different ranges of temperatures. Finally, to demonstrate an application of the proposed sensor, it has been utilized to monitor respiration through nose and mouth breathing. The low-cost, stable, repeatable, and highly sensitive response makes our fabricated sensor a promising candidate for practical field applications.

2-(6-Meth-oxy-naphthalen-2-yl)-1-(morpholin-4-yl)propan-1-one.

In the title compound, C(18)H(21)NO(3), the naphthalene group and the basal plane of the morpholine ring (r.m.s. deviations = 0.0177 and 0.0069 Å, respectively) are oriented at a dihedral angle of 44.0 (2)°. In the crystal, mol-ecules are linked by C-H⋯π inter-actions.

2-(4-Isobutyl-phen-yl)-1-(morpholin-4-yl)propan-1-one.

In the title compound, C(17)H(25)NO(2), the morpholine ring adopts a chair conformation. The benzene ring makes a dihedral angle of 39.81 (13)° with the basal plane of the morpholine group.

Ethyl (3E)-3-[2-(4-bromo-phenyl-sulfon-yl)hydrazin-1-yl-idene]butano-ate.

The asymmetric unit of title compound, C(12)H(15)BrN(2)O(4)S, contains two mol-ecules (A and B), with slightly different conformations: the bromo-phenyl rings and the SO(2) planes of the sulfonyl groups are oriented at dihedral angles of 50.2 (2) (mol-ecule A) and 58.24 (7)° (mol-ecule B), and the ethyl acetate groups make dihedral angles of 63.99 (19)° (A) and 65.35 (16)° (B) with their bromo-phenyl groups. In the crystal, both mol-ecules exist as inversion dimers linked by pairs of N-H⋯O hydrogen bonds, which generate R(2) (2)(14) loops. The dimers are linked by C-H⋯O inter-actions.