RESUMO
Head and neck squamous-cell carcinoma (HNSCC) is associated with aggressive local invasiveness, being a main reason for its poor prognosis. The exact mechanisms underlying the strong invasive abilities of HNSCC remain to be elucidated. Therefore, there is a need for in vitro models to study the interplay between cancer cells and normal adjacent tissue at the invasive tumor front. To generate oral mucosa tissue models (OMM), primary keratinocytes and fibroblasts from human oral mucosa were isolated and seeded onto a biological scaffold derived from porcine small intestinal submucosa with preserved mucosa. Thereafter, we tested different methods (single tumor cells, tumor cell spots, spheroids) to integrate the human cancer cell line FaDu to generate an invasive three-dimensional model of HNSCC. All models were subjected to morphological analysis by histology and immunohistochemistry. We successfully built OMM tissue models with high in vivo-in vitro correlation. The integration of FaDu cell spots and spheroids into the OMM failed. However, with the integration of single FaDu cells into the OMM, invasive tumor cell clusters developed. Between segments of regular epithelial differentiation of the OMM, these clusters showed a basal membrane penetration and lamina propria infiltration. Primary human fibroblasts and keratinocytes seeded onto a porcine carrier structure are suitable to build an OMM. The HNSCC model with integrated FaDu cells could enable subsequent investigations into cancer cell invasiveness.
RESUMO
Understanding the structural and functional development of human-induced pluripotent stem-cell-derived cardiomyocytes (hiPSC-CMs) is essential to engineering cardiac tissue that enables pharmaceutical testing, modeling diseases, and designing therapies. Here we use a method not commonly applied to biological materials, small angle x-ray scattering, to characterize the structural development of hiPSC-CMs within three-dimensional engineered tissues during their preliminary stages of maturation. An x-ray scattering experimental method enables the reliable characterization of the cardiomyocyte myofilament spacing with maturation time. The myofilament lattice spacing monotonically decreases as the tissue matures from its initial post-seeding state over the span of 10 days. Visualization of the spacing at a grid of positions in the tissue provides an approach to characterizing the maturation and organization of cardiomyocyte myofilaments and has the potential to help elucidate mechanisms of pathophysiology, and disease progression, thereby stimulating new biological hypotheses in stem cell engineering.
Assuntos
Células-Tronco Pluripotentes Induzidas , Miofibrilas , Humanos , Raios X , Diferenciação Celular/fisiologia , Miócitos Cardíacos/fisiologia , Células-Tronco Pluripotentes Induzidas/fisiologia , Engenharia Tecidual/métodosRESUMO
Vascular diseases are the underlying pathology in many life-threatening illnesses. Human cellular and molecular mechanisms involved in angiogenesis are complex and difficult to study in current 2D in vitro and in vivo animal models. Engineered 3D in vitro models that incorporate human pluripotent stem cell (hPSC) derived endothelial cells (ECs) and supportive biomaterials within a dynamic microfluidic platform provide a less expensive, more controlled, and reproducible platform to better study angiogenic processes in response to external chemical or physical stimulus. Current studies to develop 3D in vitro angiogenesis models aim to establish single-source systems by incorporating hPSC-ECs into biomimetic extracellular matrices (ECM) and microfluidic devices to create a patient-specific, physiologically relevant platform that facilitates preclinical study of endothelial cell-ECM interactions, vascular disease pathology, and drug treatment pharmacokinetics. This review provides a detailed description of the current methods used for the directed differentiation of human stem cells to endothelial cells and their use in engineered 3D in vitro angiogenesis models that have been developed within the last 10 years.
Assuntos
Células Endoteliais , Células-Tronco Pluripotentes , Animais , Humanos , Avaliação Pré-Clínica de Medicamentos , Angiogênese , Neovascularização Fisiológica , Diferenciação CelularRESUMO
PURPOSE: The purpose of this review is to systematically summarize the application of organoids in the field of otolaryngology and head and neck surgery. It aims to shed light on the current advancements and future potential of organoid technology in these areas, particularly in addressing challenges like hearing loss, cancer research, and organ regeneration. METHODS: Review of current literature regrading organoids in the field of otolaryngology and head and neck surgery. RESULTS: The review highlights several advancements in the field. In otology, the development of organoid replacement therapies offers new avenues for treating hearing loss. In nasal science, the creation of specific organoid models aids in studying nasopharyngeal carcinoma and respiratory viruses. In head and neck surgery, innovative approaches for squamous cell carcinoma prediction and thyroid regeneration using organoids have been developed. CONCLUSION: Organoid research in otolaryngology-head and neck surgery is still at an early stage. This review underscores the potential of this technology in advancing our understanding and treatment of various conditions, predicting a transformative impact on future medical practices in these fields.
Assuntos
Carcinoma de Células Escamosas , Perda Auditiva , Otolaringologia , Humanos , Organoides , NarizRESUMO
Multicellular 3D tissue constructs (MTCs) are important in biomedical research due to their capacity to accurately mimic the structure and variation found in real tissues. This study presents a novel bio-orthogonal engineering strategy (BIEN), a transformative scaffold-free approach, to create advanced MTCs. BIEN harnesses the cellular biosynthetic machinery to incorporate bio-orthogonal azide reporters into cell surface glycoconjugates, followed by a click reaction with multiarm PEG, resulting in rapid assembly of MTCs. The implementation of this cutting-edge strategy culminates in the formation of uniform, heterogeneous spheroids, characterized by a high degree of intercellular junction and pluripotency. Remarkably, MTCs simulate tumor features, ensure cell heterogeneity, and significantly improve the subcutaneous xenograft model after transplantation, thereby bolstering both in vitro and in vivo research models. In conclusion, the utilization of the bio-orthogonal engineering strategy as a scaffold-free method to generate superior MTCs holds promising potential for driving advancements in cancer research.
Assuntos
Esferoides Celulares , Engenharia Tecidual , Humanos , Engenharia Tecidual/métodos , Membrana Celular , Bioengenharia , Alicerces Teciduais/químicaRESUMO
The NLRP3 inflammasome plays a crucial role in the inflammatory response, reacting to pathogen-associated molecular patterns (PAMPs) and damage-associated molecular patterns (DAMPs). This response is essential for combating infections and restoring tissue homeostasis. However, chronic activation can lead to detrimental effects, particularly in neuropsychiatric and neurodegenerative diseases. Our study seeks to provide a method to effectively measure the NLRP3 inflammasome's activation within cerebral organoids (COs), providing insights into the underlying pathophysiology of these conditions and enabling future studies to investigate the development of targeted therapies.
Assuntos
Inflamassomos , Proteína 3 que Contém Domínio de Pirina da Família NLR , Organoides , Proteína 3 que Contém Domínio de Pirina da Família NLR/metabolismo , Organoides/metabolismo , Inflamassomos/metabolismo , Humanos , Animais , Encéfalo/metabolismoRESUMO
Developmental engineering (DE) involves culturing various cells on modular scaffolds (MSs), yielding modular tissues (MTs) assembled into three-dimensional (3D) tissues, mimicking developmental biology. This study employs an integrated approach, merging experimental and mathematical methods to investigate the biological processes in MT cultivation and assembly. Human dermal fibroblasts (HDFs) were cultured on tissue culture plastics, poly(lactic acid) (PLA) discs with regular open structures, or spherical poly(methyl methacrylate) (PMMA) MSs, respectively. Notably, HDFs exhibited flattened spindle shapes when adhered to solid surfaces, and complex 3D structures when migrating into the structured voids of PLA discs or interstitial spaces between aggregated PMMA MSs, showcasing coordinated colonization of porous scaffolds. Empirical investigations led to power law models simulating density-dependent cell growth on solid surfaces or voids. Concurrently, a modified diffusion model was applied to simulate oxygen diffusion within tissues cultured on solid surfaces or porous structures. These mathematical models were subsequently combined to explore the influences of initial cell seeding density, culture duration, and oxygen diffusion on MT cultivation and assembly. The findings underscored the intricate interplay of factors influencing MT design for tissue assembly. The integrated approach provides insights into mechanistic aspects, informing bioprocess design for manufacturing MTs and 3D tissues in DE.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Humanos , Alicerces Teciduais/química , Engenharia Tecidual/métodos , Polimetil Metacrilato/química , Poliésteres , OxigênioRESUMO
The National Center for Advancing Translational Sciences (NCATS) Assay Guidance Manual (AGM) Workshop on 3D Tissue Models for Antiviral Drug Development, held virtually on 7-8 June 2022, provided comprehensive coverage of critical concepts intended to help scientists establish robust, reproducible, and scalable 3D tissue models to study viruses with pandemic potential. This workshop was organized by NCATS, the National Institute of Allergy and Infectious Diseases, and the Bill and Melinda Gates Foundation. During the workshop, scientific experts from academia, industry, and government provided an overview of 3D tissue models' utility and limitations, use of existing 3D tissue models for antiviral drug development, practical advice, best practices, and case studies about the application of available 3D tissue models to infectious disease modeling. This report includes a summary of each workshop session as well as a discussion of perspectives and challenges related to the use of 3D tissues in antiviral drug discovery.
Assuntos
Antivirais , Descoberta de Drogas , Antivirais/farmacologia , Antivirais/uso terapêutico , BioensaioRESUMO
The intertwined relationship between structure and function has been key to understanding human organ physiology and disease pathogenesis. An organ-on-a-chip (organ chip) is a bioengineered microfluidic cell culture device lined by living cells and tissues that recapitulates organ-level functions in vitro. This is accomplished by recreating organ-specific tissue-tissue interfaces and microenvironmental biochemical and mechanical cues while providing dynamic perfusion through endothelium-lined vascular channels. In this review, we discuss how this emerging technology has contributed to the understanding of human lung structure-function relationships at the cell, tissue, and organ levels.
Assuntos
Técnicas de Cultura de Células , Dispositivos Lab-On-A-Chip , Células Endoteliais , Humanos , PulmãoRESUMO
There is a growing need to uncover biomarkers of ionizing radiation exposure that leads to a better understanding of how exposures take place, including dose type, rate, and time since exposure. As one of the first organs to be exposed to external sources of ionizing radiation, skin is uniquely positioned in terms of model systems for radiation exposure study. The simultaneous evolution of both MS-based -omics studies, as well as in vitro 3D skin models, has created the ability to develop a far more holistic understanding of how ionizing radiation affects the many interconnected biomolecular processes that occur in human skin. However, there are a limited number of studies describing the biomolecular consequences of low-dose ionizing radiation to the skin. This review will seek to explore the current state-of-the-art technology in terms of in vitro 3D skin models, as well as track the trajectory of MS-based -omics techniques and their application to ionizing radiation research, specifically, the search for biomarkers within the low-dose range.
Assuntos
Exposição à Radiação , Humanos , Modelos Biológicos , Radiação Ionizante , PeleRESUMO
Over the course of the aging process, fibroblasts lose contractility, leading to reduced connective-tissue stiffness. A promising therapeutic avenue for functional rejuvenation of connective tissue is reprogrammed fibroblast replacement, although major hurdles still remain. Toward this, we recently demonstrated that the laterally confined growth of fibroblasts on micropatterned substrates induces stem-cell-like spheroids. In this study, we embedded these partially reprogrammed spheroids in collagen-I matrices of varying densities, mimicking different three-dimensional (3D) tissue constraints. In response to such matrix constraints, these spheroids regained their fibroblastic properties and sprouted to form 3D connective-tissue networks. Interestingly, we found that these differentiated fibroblasts exhibit reduced DNA damage, enhanced cytoskeletal gene expression, and actomyosin contractility. In addition, the rejuvenated fibroblasts show increased matrix protein (fibronectin and laminin) deposition and collagen remodeling compared to the parental fibroblast tissue network. Furthermore, we show that the partially reprogrammed cells have comparatively open chromatin compaction states and may be more poised to redifferentiate into contractile fibroblasts in 3D-collagen matrix. Collectively, our results highlight efficient fibroblast rejuvenation through laterally confined reprogramming, which has important implications in regenerative medicine.
Assuntos
Diferenciação Celular , Reprogramação Celular , Fibroblastos/citologia , Medicina Regenerativa , Rejuvenescimento/fisiologia , Idoso , Animais , Proliferação de Células , Células Cultivadas , Colágeno Tipo I/metabolismo , Matriz Extracelular/metabolismo , Fibroblastos/metabolismo , Fibronectinas/metabolismo , Humanos , Laminina/metabolismo , Camundongos , Células NIH 3T3 , Esferoides Celulares/citologia , Esferoides Celulares/metabolismoRESUMO
(1) Background: Reviewing biological material under the microscope is a demanding and time-consuming process, prone to diagnostic pitfalls. In this study, a methodology for tomographic imaging of tissue sections is presented, relying on the idea that each tissue sample has a finite thickness and, therefore, it is possible to create images at different levels within the sample, revealing details that would probably not be seen otherwise. (2) Methods: Optical slicing was possible by developing a custom-made microscopy stage controlled by an ARDUINO. The custom-made stage, besides the normal sample movements that it should provide along the x-, y-, and z- axes, may additionally rotate the sample around the horizontal axis of the microscope slide. This rotation allows the conversion of the optical microscope into a CT geometry, enabling optical slicing of the sample using projection-based tomographic reconstruction algorithms. (3) Results: The resulting images were of satisfactory quality, but they exhibited some artifacts, which are particularly evident in the axial plane images. (4) Conclusions: Using classical tomographic reconstruction algorithms at limited angles, it is possible to investigate the sample at any desired optical plane, revealing information that would be difficult to identify when focusing only on the conventional 2D images.
Assuntos
Microscopia , Tomografia , Algoritmos , Artefatos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodosRESUMO
The culturing of cells in the laboratory under controlled conditions has always been crucial for the advancement of scientific research. Cell-based assays have played an important role in providing simple, fast, accurate, and cost-effective methods in drug discovery, disease modeling, and tissue engineering while mitigating reliance on cost-intensive and ethically challenging animal studies. The techniques involved in culturing cells are critical as results are based on cellular response to drugs, cellular cues, external stimuli, and human physiology. In order to establish in vitro cultures, cells are either isolated from normal or diseased tissue and allowed to grow in two or three dimensions. Two-dimensional (2D) cell culture methods involve the proliferation of cells on flat rigid surfaces resulting in a monolayer culture, while in three-dimensional (3D) cell cultures, the additional dimension provides a more accurate representation of the tissue milieu. In this review, we discuss the various methods involved in the development of 3D cell culture systems emphasizing the differences between 2D and 3D systems and methods involved in the recapitulation of the organ-specific 3D microenvironment. In addition, we discuss the latest developments in 3D tissue model fabrication techniques, microfluidics-based organ-on-a-chip, and imaging as a characterization technique for 3D tissue models.
Assuntos
Bioimpressão , Engenharia Tecidual , Animais , Humanos , Engenharia Tecidual/métodos , Técnicas de Cultura de Células/métodos , Descoberta de Drogas/métodos , Bioimpressão/métodosRESUMO
Adipose-derived stem cells (ADSCs) have incredible potential as an avenue to better understand and treat neurological disorders. While they have been successfully differentiated into neural stem cells and neurons, most such protocols involve 2D environments, which are not representative of in vivo physiology. In this study, human ADSCs were cultured in 1.1 kPa polyethylene-glycol 3D hydrogels for 10 days with B27, CultureOne (C1), and N2 neural supplements to examine the neural differentiation potential of ADSCs using both chemical and mechanical cues. Following treatment, cell viability, proliferation, morphology, and proteome changes were assessed. Results showed that cell viability was maintained during treatments, and while cells continued to proliferate over time, proliferation slowed down. Morphological changes between 3D untreated cells and treated cells were not observed. However, they were observed among 2D treatments, which exhibited cellular elongation and co-alignment. Proteome analysis showed changes consistent with early neural differentiation for B27 and C1 but not N2. No significant changes were detected using immunocytochemistry, potentially indicating a greater differentiation period was required. In conclusion, treatment of 3D-cultured ADSCs in PEG-based hydrogels with B27 and C1 further enhances neural marker expression, however, this was not observed using supplementation with N2.
Assuntos
Células-Tronco Neurais , Proteoma , Humanos , Tecido Adiposo , Células Cultivadas , Diferenciação Celular/fisiologia , Materiais Biocompatíveis , Hidrogéis/farmacologiaRESUMO
To study the effects of the crosslinking of IGF1 and/or the human thyroid-stimulating monoclonal autoantibody (TSmAb), M22 on mouse adipocytes, two- and three-dimensional (2D or 3D) cultures of 3T3-L1 cells were prepared. Each sample was then subjected to the following analyses: (1) lipid staining, (2) a real-time cellular metabolic analysis, (3) analysis of the mRNA expression of adipogenesis-related genes and extracellular matrix (ECM) molecules including collagen (Col) 1, 4 and 6, and fibronectin (Fn), and (4) measurement of the size and physical properties of the 3D spheroids with a micro-squeezer. Upon adipogenic differentiation (DIF+), lipid staining and the mRNA expression of adipogenesis-related genes in the 2D- or 3D-cultured 3T3-L1 cells substantially increased. On adding IGF1 but not M22 to DIF+ cells, a significant enhancement in lipid staining and gene expressions of adipogenesis-related genes was detected in the 2D-cultured 3T3-L1 cells, although some simultaneous suppression or enhancement effects by IGF1 and M22 against lipid staining or Fabp4 expression, respectively, were detected in the 3D 3T3-L1 spheroids. Real-time metabolic analyses indicated that monotherapy with IGF1 or M22 shifted cellular metabolism toward energetic states in the 2D 3T3-L1 cells upon DIF+, although no significant metabolic changes were induced by DIF+ alone in 2D cultures. In addition, some synergistical effects on cellular metabolism by IGF1 and M22 were also observed in the 2D 3T3-L1 cells as well as in cultured non-Graves' orbitopathy-related human orbital fibroblasts (n-HOFs), but not in Graves' orbitopathy-related HOFs (GHOFs). In terms of the physical properties of the 3D 3T3-L1 spheroids, (1) their sizes significantly increased upon DIF+, and this increase was significantly enhanced by the presence of both IGF1 and M22 despite downsizing by monotreatment, and (2) their stiffness increased substantially, and no significant effects by IGF-1 and/or M22 were observed. Regarding the expression of ECM molecules, (1) upon DIF+, significant downregulation or upregulation of Col1 and Fn (3D), or Col4 and 6 (2D and 3D) were observed, and (2) in the presence of IGF-1 and/or M22, the mRNA expression of Col4 was significantly downregulated by M22 (2D and 3D), but the expression of Col1 was modulated in different manners by monotreatment (upregulation) or the combined treatment (downregulation) (3D). These collective data suggest that the human-specific TSmAb M22 induced some unexpected simultaneous crosslinking effects with IGF-1 with respect to the adipogenesis of 2D-cultured 3T3-L1 cells and the physical properties of 3D 3T3-L1 spheroids.
Assuntos
Adipogenia , Oftalmopatia de Graves , Humanos , Animais , Camundongos , Oftalmopatia de Graves/metabolismo , Autoanticorpos/farmacologia , Fator de Crescimento Insulin-Like I/farmacologia , RNA Mensageiro/metabolismo , Lipídeos/farmacologia , Células 3T3-L1RESUMO
The use of reconstituted human airway (RHuA) epithelial tissues to assess functional endpoints is highly relevant in respiratory toxicology, but standardised methods are lacking. In June 2015, the Institute for In Vitro Sciences (IIVS) held a technical workshop to evaluate the potential for standardisation of methods, including ciliary beat frequency (CBF). The applicability of a protocol suggested in the workshop was assessed in a multi-laboratory ring study. This report summarises the findings, and uses the similarities and differences identified between the laboratories to make recommendations for researchers in the absence of a validated method. Two software platforms for the assessment of CBF were used - Sisson-Ammons Video Analysis (SAVA; Ammons Engineering, Clio, MI, USA) and ciliaFA (National Institutes of Health, Bethesda, MD, USA). Both were utilised for multiple read temperatures, one objective strength (10×) and up to four video captures per tissue, to assess their utility. Two commercial RHuA tissue cultures were used: MucilAir™ (Epithelix, Geneva, Switzerland) and EpiAirway™ (MatTek, Ashland, MA, USA). IL-13 and procaterol were used to induce CBF-specific responses as positive controls. Further testing addressed the impact of tissue acclimation duration, the number of capture fields and objective strengths on baseline CBF readings. Both SAVA and ciliaFA reliably collected CBF data. However, ciliaFA failed to generate accurate CBF measurements above â¼10 Hz. The positive controls were effective, but were subject to inter-laboratory variability. CBF endpoints were generally uniform across replicate tissues, objective strengths and laboratories. Longer tissue acclimation increased the percentage active area, but had minimal impact on CBF. Taken together, these findings support the development and validation of a standardised CBF measurement protocol.
Assuntos
Cílios , Depuração Mucociliar , Epitélio , Humanos , Laboratórios , Software , Estados UnidosRESUMO
Advanced microfabrication technologies and biocompatible hydrogel materials facilitate the modeling of 3D tissue microenvironment. Encapsulation of cells in hydrogel microparticles offers an excellent high-throughput platform for investigating multicellular interaction with their surrounding microenvironment. Compartmentalized microparticles support formation of various unique cellular structures. Alginate has emerged as one of the most dominant hydrogel materials for cell encapsulation owing to its cytocompatibility, ease of gelation, and biocompatibility. Alginate hydrogel provides a permeable physical boundary to the encapsulated cells and develops an easily manageable 3D cellular structure. The interior structure of alginate hydrogel can further regulate the spatiotemporal distribution of the embedded cells. This review provides a specific overview of the representative engineering approaches to generate various structures of cell-laden alginate microparticles in a uniform and reproducible manner. Capillary nozzle systems, microfluidic droplet systems, and non-chip based high-throughput microfluidic systems are highlighted for developing well-regulated cellular structure in alginate microparticles to realize potential drug screening platform and cell-based therapy. We conclude with the discussion of current limitations and future directions for realizing the translation of this technology to the clinic.
Assuntos
Alginatos/química , Materiais Biocompatíveis/química , Técnicas de Cultura de Células em Três Dimensões/métodos , Engenharia Celular/métodos , Hidrogéis/química , Materiais Biocompatíveis/farmacologia , Sobrevivência Celular/efeitos dos fármacos , Microambiente Celular/efeitos dos fármacos , Humanos , Células MCF-7 , Microfluídica/métodos , Tamanho da Partícula , Reprodutibilidade dos TestesRESUMO
3D organoid cultures were used to elucidate the periocular effects of several anti-glaucoma drugs including a prostaglandin F2α analogue (bimatoprost acid; BIM-A), EP2 agonist (omidenepag; OMD) or a Rho-associated coiled-coil containing protein kinase (ROCK) inhibitor (ripasudil; Rip) on Grave's orbitopathy (GO) related orbital fatty tissue. 3D organoids were prepared from GO related human orbital fibroblasts (GHOFs) obtained from patients with GO. The effects of either 100 nM BIM-A, 100 nM OMD or 10 µM Rip on the 3D GHOFs organoids were examined with respect to organoid size, physical properties by a micro-squeezer, and the mRNA expression of extracellular matrix (ECM) proteins including collagen (COL) 1, COL 4, COL 6, and fibronectin (FN), ECM regulatory genes including lysyl oxidase (LOX), Connective Tissue Growth Factor (CTGF) and inflammatory cytokines including interleukin-1ß (IL1ß) and interleukin-6 (IL6). The size of the 3D GHOFs organoids decreased substantially in the presence of BIM-A, but also increased substantially in the presence of the others (OMD or Rip). The physical stiffness of the 3D GHOFs organoids was significantly decreased by Rip. BIM-A caused significantly the down-regulation of three ECM genes, Col 1, Col 6 and Fn, and two ECM regulatory genes and the up-regulation of IL6. In the presence of OMD, two ECM genes, Col 1 and Fn, and LOX were significantly down-regulated but IL1ß and IL6 were significantly up-regulated. In the case of Rip, Col 1, FN and CTGF were significant down-regulated. Our present findings indicate that anti-glaucoma drugs modulate the structures and physical properties 3D GHOFs organoids in different manners by modifying the gene expressions of ECM, ECM regulatory factors and inflammatory cytokines. The results indicate that the benefits and demerits of anti-glaucoma medications need to be scrutinized carefully, in cases of patients with GO.
Assuntos
Dinoprosta/agonistas , Fibroblastos/efeitos dos fármacos , Oftalmopatia de Graves/tratamento farmacológico , Órbita/efeitos dos fármacos , Organoides/metabolismo , Receptores de Prostaglandina E Subtipo EP2/agonistas , Quinases Associadas a rho/antagonistas & inibidores , Bimatoprost/farmacologia , Técnicas de Cultura de Células , Proteínas da Matriz Extracelular/genética , Fibroblastos/metabolismo , Regulação da Expressão Gênica/fisiologia , Glicina/análogos & derivados , Glicina/farmacologia , Oftalmopatia de Graves/metabolismo , Humanos , Isoquinolinas/farmacologia , Conformação Molecular , Órbita/patologia , Inibidores de Proteínas Quinases/farmacologia , Pirazóis/farmacologia , Piridinas/farmacologia , RNA Mensageiro/genética , Reação em Cadeia da Polimerase em Tempo Real , Sulfonamidas/farmacologiaRESUMO
Culturing three-dimensional (3D) tissues with an appropriate microenvironment is a critical and fundamental technology in broad areas of cutting-edge bioengineering research. In addition, many technologies have engineered tissue functions. However, an effective system for transporting nutrients, waste, or oxygen to affect the functions of cell tissues has not been reported. In this study, we introduce a novel system that employs diffusion and convection to enhance transportation. To demonstrate the concept of the proposed system, three layers of normal human dermal fibroblast cell sheets are used as a model tissue, which is cultured on a general dish or porous collagen scaffold with perfusable channels for three days with and without the perfusion of culture media in the scaffold. The results show that the viability of the cell tissue was improved by the developed system. Furthermore, glucose consumption, lactate production, and oxygen transport to the tissues were increased, which might improve the viability of tissues. However, mechanical stress in the proposed system did not cause damage or unintentional functional changes in the cultured tissue. We believe that the introduced culturing system potentially suggests a novel standard for 3D cell cultures.
Assuntos
Técnicas de Cultura de Células , Colágeno , Géis , Perfusão/métodos , Alicerces Teciduais , Células Cultivadas , Géis/química , Porosidade , Esferoides Celulares , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
Type 2 diabetes mellitus (T2D) is one of the prominent risk factors for the development and progression of calcific aortic valve disease. Nevertheless, little is known about molecular mechanisms of how T2D affects aortic valve (AV) remodeling. In this study, the influence of hyperinsulinemia and hyperglycemia on degenerative processes in valvular tissue is analyzed in intact AV exposed to an either static or dynamic 3D environment, respectively. The complex native dynamic environment of AV is simulated using a software-governed bioreactor system with controlled pulsatile flow. Dynamic cultivation resulted in significantly stronger fibrosis in AV tissue compared to static cultivation, while hyperinsulinemia and hyperglycemia had no impact on fibrosis. The expression of key differentiation markers and proteoglycans were altered by diabetic conditions in an environment-dependent manner. Furthermore, hyperinsulinemia and hyperglycemia affect insulin-signaling pathways. Western blot analysis showed increased phosphorylation level of protein kinase B (AKT) after acute insulin stimulation, which was lost in AV under hyperinsulinemia, indicating acquired insulin resistance of the AV tissue in response to elevated insulin levels. These data underline a complex interplay of diabetic conditions on one hand and biomechanical 3D environment on the other hand that possesses an impact on AV tissue remodeling.