Comparison of the sealing ability amongst orthograde apical plugs of mineral trioxide aggregate plus, mineral trioxide aggregate repair HP, and Biodentine after root resection: a bacterial leakage study.

This study aimed to analyse the effect of root-end resection on the sealing ability of orthograde apical plugs of three root-end filling materials (MTA Repair HP, Biodentine, MTA Plus) using the bacterial leakage method and compare it with the retrograde root-end filling technique. Eighty-four extracted mandibular premolar teeth with single root and single straight canals were selected and randomly divided into two main experimental groups (n = 36) depending on the apical plug placement technique and a control: Group I: orthograde technique, followed by root-end resection; Group II: retrograde root-end filling technique; one control Group III (n = 12): obturation with gutta-percha, followed by root-end resection. Experimental groups were further subdivided into three subgroups A, B, and C (n = 12) depending on the three different root-end filling materials used. An apical plug of 3 mm thickness was obtained in both the experimental groups. The apical sealing ability was evaluated with the dual-chamber bacterial leakage method. Statistical analysis was performed using the Kaplan-Meier survival analysis test. By the end of 30 days, the occurrence of turbidity indicating bacterial leakage was 75% in MTA Repair HP, 83.3% in Biodentine, and 91.7% in MTA Plus samples. This trend of turbidity was similar in both orthograde and retrograde technique. The control group showed turbidity in all the samples (100%). More MTA Repair HP samples (25%) survived the 30 days observation period with no bacterial leakage compared to Biodentine (16.7%) and MTA Plus (8.3%). The sealing ability of already set root-end filling materials placed through the orthograde technique did not deteriorate after root-end resection. Also among three root-end filling materials, MTA Repair HP presented the lowest bacterial microleakage followed by Biodentine and MTA Plus, respectively.

Finite element evaluation of dentin stress changes following different endodontic surgical approaches.

The aim was to compare the effect of different endodontic surgical treatments on the stress distributions in dentin of a simulated first mandibular molar tooth using the finite element analysis method. Three surgical endodontic procedures (apical resection, root amputation, and hemisection) were simulated in a first mandibular molar. Biodentine or mineral-trioxide-aggregate was used to repair the surgery site in apical resection and root amputation models; the remaining root canal spaces were filled with gutta-percha. Access cavities were restored using resin composite. In hemisection model, root canal was filled with gutta-percha, and coronal restoration was finished with a monolithic zirconia crown. A sound tooth model was created as a control model. An oblique force of 300 N angled at 45° to the occlusal plane was simulated. Maximum von Mises stresses were evaluated in dentin near the surgery regions and the entire tooth. Apical resection/Biodentine and apical resection/mineral-trioxide-aggregate models generated maximum von Mises stresses of 39.001 MPa and 39.106 MPa, respectively. The recorded maximum von Mises stresses in root amputation models were 66.491 MPa for root amputation/Biodentine and 73.063 MPa for root amputation/mineral-trioxide-aggregate models. The highest maximum von Mises stress value among all models was observed in the hemisection model, measuring 138.87 MPa. Hemisection induced the highest von Mises stresses in dentin, followed by root amputation and apical resection. In apical resection, Biodentine and mineral-trioxide-aggregate did not show a significant difference in stress distribution. Biodentine in root amputation may lead to lower stresses compared to mineral-trioxide-aggregate.

Partial pulpotomy success in primary molars followed up for 24 months: A randomized controlled clinical trial using mineral trioxide aggregate, biodentine, and acemannan.

BACKGROUND: Finding the best treatment approach and suitable capping materials in primary molars with deep carious lesions remains unresolved. AIM: To compare the success rates of partial pulpotomy in deep caries lesions in primary molars treated with mineral trioxide aggregate (MTA), biodentine, or acemannan for 6-24 months. DESIGN: A parallel-design, non-inferiority randomized controlled clinical trial was performed. Ninety mandibular primary molars from 65 children meeting the criteria, aged 3-8 years, were included. After inflamed pulp tissue removal and hemostasis, each tooth was randomly allocated into the MTA control group, or the biodentine or acemannan experimental group (N = 30 per group). All teeth were restored with a stainless steel crown. The outcomes were evaluated for 6-24 months. A generalized estimating equation model was used to compare the overall success rate in each group. RESULTS: After 24 months, 58 children (83 teeth) were available for evaluation. The results indicated that the success rate in the MTA, biodentine, and acemannan groups was 83.3%, 76.9%, and 74.1%, respectively. No significant difference in success rates among groups, however, was observed at the 6- to 24-month follow-ups (at 24th month, p = .30). CONCLUSION: There was no statistically significant difference between MTA, biodentine, or acemannan in the partial pulpotomy success after 24 months.

Prevention efficacy of dentin tubule sealing with Nd:YAG laser against tooth discoloration induced by vital pulp treatment.

BACKGROUND: The discoloration potential of dental materials and applications such as vital pulp therapy also cause discoloration due to the presence of blood. Dentin tubule sealing methods could be used for the prevention of discoloration. AIM: The purpose of this study was to evaluate the effect of sealing pulp chamber walls with Nd:YAG laser against discoloration caused by tricalcium silicate-based materials in the presence and absence of blood contamination. DESIGN: Eighty-one extracted human maxillary incisors were prepared and randomly divided into nine groups according to the Nd:YAG laser application, the cement to be used (NeoMTA Plus/Biodentine), and the presence or absence of blood. The color measurements were obtained with a spectrophotometer at baseline and then at the sixth (T1) and 12th (T2) months thereafter. RESULTS: Sealing with Nd:YAG laser and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). Similarly, without sealing the cavity and placing NeoMTA Plus or Biodentine on human blood significantly increased discoloration at T1 and T2 (p < .05). CONCLUSION: Regardless of sealing the dentin tubules with Nd:YAG laser, NeoMTA Plus and Biodentine caused more discoloration in the presence of blood contamination.

Evaluation of microleakage of mineral trioxide aggregate and biodentine as apical barriers in simulated young permanent teeth.

BACKGROUND: Apexification is a procedure that promotes apical closure by forming mineralized tissue in the apex region of a nonvital young permanent tooth. Calcium silicate-based cement like Mineral trioxide aggregate (MTA) and Biodentine are commonly employed as apical barriers to facilitate this process. Microleakage, defined as the leakage along the junction between the canal wall and filling material, is a crucial aspect to assess in MTA and Biodentine applications as apical barriers, as it directly impacts the prevention of bacterial seepage and maintenance of structural integrity. The current study aims to assess the microleakage of MTA and Biodentine when used as apical barriers in simulated young permanent teeth. METHODS: From a total of 128 extracted teeth, 114 were selected for the study and randomly allocated into three groups: G1 (MTA), G2 (Biodentine), and G3 (Control), with 38 teeth per group. After excluding 5 teeth from each group due to issues such as canal calcification, breakage during sectioning, and procedural errors, 33 teeth were analyzed to ensure equal distribution. To simulate young permanent teeth, samples were instrumented using a person-reamer with a diameter of 1.7 mm. A 4 mm thick apical plug of MTA and Biodentine was placed in G1 and G2, respectively, while G3 was the control group. Apical microleakage in all experimental groups was assessed using a dye penetration method. Specimens were longitudinally sectioned and examined under a stereomicroscope with graded eyepiece. RESULTS: The Kruskal-Wallis test revealed variations in mean apical microleakage among the groups: G1 recorded 0.67, G2-0.16, and G3-1.62, with G2 showing the lowest value and G3 group exhibiting the highest. CONCLUSIONS: Biodentine was found to excel in its ability to create a secure seal and function effectively as an apical barrier in simulated young permanent teeth. These results underscore its potential as a highly efficient material for dental applications, particularly in scenarios requiring reliable sealing and barrier formation in the root canal system of developing permanent teeth.

Assessment of MMP levels in reversible and irreversible pulpitis and a randomized controlled trial comparing clinical success of two different calcium-silicate cements in pulpotomy treatment of primary molars with an 18-month follow-up.

BACKGROUND: Matrix metalloproteinases (MMPs) are critical enzymes involved in the remodeling and defense mechanisms of dental pulp tissue. While their role in permanent teeth has been extensively studied, research focusing on MMPs in primary teeth remains limited. This gap highlights the need for further investigations to understand the specific contributions of MMPs to pulpal defense in primary teeth. Moreover, the clinical efficacy of Biodentine as a pulpotomy material in primary teeth warrants further exploration through well-designed studies to establish its success and long-term outcomes in pediatric dentistry. AIM: This study aims to compare the expression levels of MMP-2, MMP-8, and MMP-9 in cases of reversible and irreversible pulpitis. Additionally, it seeks to evaluate the clinical success of Mineral Trioxide Aggregate (MTA) and Biodentine when used as pulpotomy agents in primary molars. By analyzing the differential expression of these MMPs, the study will contribute to a better understanding of their role in pulpal inflammation and the potential therapeutic outcomes of MTA and Biodentine in primary molars. DESIGN: In this parallel randomized controlled trial, 63 mandibular primary second molars were assigned to two main groups: Group 1, consisting of 42 teeth diagnosed with reversible pulpitis, and Group 2, consisting of 21 teeth diagnosed with irreversible pulpitis. Group 1 was further divided into two randomized subgroups, each containing 21 teeth. The expression levels of MMP-2, MMP-8, and MMP-9 were evaluated in all samples. Pulpotomy treatments were performed using MTA and Biodentine in Group 1. Clinical and radiographic evaluations were conducted over an 18-month follow-up period. Statistical analyses were carried out using The Kolmogorov-Smirnov test, t-test and Fisher's exact test (p < 0.05). RESULTS: The study revealed that MMP-2 and MMP-9 expression levels were significantly elevated in specimens with irreversible pulpitis (p = 0.01), indicating a potential correlation between these matrix metalloproteinases and the severity of pulpal inflammation. However, no significant difference was observed in the clinical success rates of pulpotomies performed with MTA and Biodentine, suggesting that both materials are equally effective in the treatment of primary molars with reversible pulpitis. CONCLUSIONS: The expression of MMP-2 and MMP-9 in pulpal blood presents a promising biomarker for assessing the degree of pulpal inflammation in primary teeth, offering a potentially valuable diagnostic tool. Additionally, the clinical success of Biodentine in pulpotomy procedures supports its viability as an effective alternative to MTA, providing a reliable option. CLINICAL TRIAL REGISTRATION ID: The study protocol has been registered with an ID: NCT05145686. Registration Date: 9th November 2021.

Evaluation of the physical properties of bromelain-modified biodentine for direct pulp capping.

BACKGROUND: This study aims to evaluate the compressive strength, solubility, radiopacity, and flow of Bromelain (BR)-modified Biodentine (BD) for direct pulp capping (DPC). This is suggested to determine the impact of BR on the physical properties of BD. METHODS: Eighty samples were prepared according to the ISO and ADA specifications and evaluated for compressive strength, solubility, radiopacity, and flow. The compressive strength was evaluated at 24 h and 21 days via a universal testing machine. The solubility was determined by weight loss after 24-hours immersion in deionized water. Radiopacity was assessed via X-ray with aluminum step-wedges, and flow was measured by the diameter of the discs under a standard weight. Independent sample t-tests were used to statistically assess the data. A significance level of 5% was considered. RESULTS: The compressive strength was 41.08 ± 1.84 MPa for BD and 40.92 ± 1.80 MPa for BR + BD after 24 h, and 88.93 ± 3.39 MPa for BD and 87.92 ± 3.76 MPa for BR + BD after 21 days, with no significant differences. Solubility was slightly greater in the BR + BD (2.75 ± 0.10%) compared to BD (2.62 ± 0.25%), but not significantly different. The radiopacity was similar between BD (2.82 ± 0.11 mm) and BR + BD (2.73 ± 0.10 mm). BR + BD resulted in significantly greater flow (9.99 ± 0.18 mm) than did BD (9.65 ± 0.27 mm) (p ≤ 0.05). CONCLUSION: BR-modified BD maintains BD's physical properties, with improved flow, making it a promising DPC agent that warrants further study.

Marginal adaptation of customized gutta percha cone with calcium silicate based sealer versus MTA and biodentine apical plugs in simulated immature permanent teeth (an in vitro study).

BACKGROUND: This study aimed to compare the marginal adaptation of a single customized gutta percha cone with calcium silicate-based sealer versus mineral trioxide aggregate (MTA) and Biodentine apical plugs in simulated immature permanent teeth. METHODS: Thirty-nine extracted human maxillary anterior teeth were selected, prepared to simulate immature permanent teeth with an apical diameter 1.1 mm, placed in moist foam and divided into three groups. Group 1: Obturation with a single customized gutta percha cone and calcium silicate sealer. Group 2: MTA apical plug. Group 3: Biodentine apical plug. After incubation, teeth were horizontally sectioned at 1 mm and 3 mm from the apex and marginal adaptation was evaluated using scanning electron microscope (SEM). RESULTS: Biodentine showed the least mean gap size at both 1 and 3 mm from the apex with no statistically significant differences compared to MTA (p > 0.05). The single customized cone with calcium silicate based sealer showed the greatest mean gap size at both 1 and 3 mm from the apex with a statistically significant difference compared to the other groups (p < 0.001). CONCLUSION: Biodentine and MTA apical plugs provide a significantly better marginal adaptation to the dentinal walls than a single customized gutta percha cone with calcium silicate based sealer in simulated immature permanent teeth.

Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates.

AIM: To evaluate the push-out bond strength of two newly modified mineral trioxide aggregates (MTAs) with conventional MTA and biodentine. MATERIALS AND METHODS: Material preparation: Two commercially available bioactive bioceramics: Group I: Mineral trioxide aggregate; Group II: Biodentine; and two newly formulated modified MTAs: Group III: Doxycycline incorporated MTA formulation; Group IV: Metronidazole incorporated MTA formulation was used in the present study. All the test materials were then carried using a plastic instrument to the desired experimental design. Teeth sample preparation: A total of 120 teeth samples were collected and divided into four groups of test materials with 30 teeth samples per group. Single-rooted permanent teeth, that is, incisors were collected and stored in saline until the study was performed. Sectioning of the teeth into 2.0 ± 0.05-mm thick slices was performed perpendicular to the long axis of the tooth. The canal space was instrumented using Gates Glidden burs to achieve a diameter of 1.5 mm. All four prepared materials were mixed and placed in the lumen of the slices and placed in an incubator at 37°C for 72 hours. Push-out test and bond failure pattern evaluation: The push-out test was performed using a universal testing machine. The slices were examined under a scanning electron microscope (SEM) at 40× magnification to determine the nature of bond failure. All the collected data were recorded and statistically analyzed. RESULTS: The mean push-out bond strength was found to be the highest for group II (37.38 ± 1.94 MPa) followed by group III (28.04 ± 2.22 MPa) and group IV (27.83 ± 1.34 MPa). The lowest mean push-out bond strength was noticed with group I (22.89 ± 2.49 MPa). This difference was found to be statistically significant (p = 0.000). Group I samples had the predominantly adhesive type of failure (86.4%), while group II samples showed the cohesive type of failure (94.2%). Both the modified MTAs (groups III and IV) primarily showed mixed types of failures. CONCLUSION: Both the antibacterial-enhanced MTAs had better pushout bond strength compared to conventional MTA but did not outperform biodentine. Hence, it could serve as a substitute for conventional MTA due to its augmented physical properties. CLINICAL SIGNIFICANCE: Carious pulp exposure and nonvital open apices pose a critical challenge to pediatric dental practitioners. In such circumstances, maintaining the vitality of pulp and faster healing would help in a better prognosis. Novel MTAs without any cytotoxic components, and enhanced antibacterial contents with augmented physical properties can help in treating such clinical conditions. How to cite this article: Merlin ARS, Ravindran V, Jeevanandan G, et al. Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates. J Contemp Dent Pract 2024;25(2):168-173.

Biodentine as a pulpotomy medicament for primary molars: a retrospective chart review.

This retrospective chart review study investigates the long-term clinical outcome of Biodentine® (Tricalcium silicate) as a medicament for pulpotomy in primary molars. Data in this retrospective study was collected from the dental records of all patients that had at least one primary molar receive pulpotomy treatment (CDT code: D3221) between 01 July 2012 and 01 July 2015. This data includes child's age, medical history, dental history, dental radiographs, pulpotomy procedure details and follow-up clinical notes. Kaplan-Meier Estimate was used to measure the fraction of successful pulpotomy procedures for up to 24 months. A total of 1758 pulpotomy procedures were performed on 1032 patients in our institute in the three-year period and 21.4% of them (N = 376) had follow-up dental records that qualified for the study. Eleven teeth out of 376 teeth were excluded from the statistical analysis due to loss of/broken stainless steel crowns (3.1%). Seventeen pulpotomy failures were identified out of the remaining 365 procedures. The survival probablity of using Biodentine® as a pulpotomy medicament is 96.3% for 18-month follow-up and 95.4% for 24-month follow-up. Biodentine®, a tricalcium silicate formulation, used as a pulpotomy medicament demonstrates a high clinical success rate (95.4%) over a 24-month peroid in primary molars.

Outcome of partial and full pulpotomy in cariously exposed mature molars with symptoms indicative of irreversible pulpitis: A randomized controlled trial.

AIM: The aim of this study was to assess and compare the clinical and radiographic outcome of partial pulpotomy and full pulpotomy using Biodentine in cariously exposed mature molar teeth with symptoms indicative of irreversible pulpitis. METHODOLOGY: This study is an unicentric, double-arm, randomized superiority clinical trial with parallel experimental groups, registered under CTRI (CTRI/2019/12/022559). Fifty mature permanent molar teeth with carious exposures with symptoms indicative of irreversible pulpitis were randomly allocated equally into two groups. Partial pulpotomy (PP) and full pulpotomy (FP) were performed in the first and second group, respectively, following standardized protocols. Exposed pulp tissue was removed up to a depth of 2-3 mm for partial pulpotomy, whereas complete coronal pulp tissue was removed up to the level of root orifices for full pulpotomy. Haemostasis was achieved with placement of 2.5% sodium hypochlorite-moistened cotton pellets placed on amputated pulp tissue for a maximum of 10 min. Biodentine was used as the pulp capping material. Pain scores were evaluated using 11-point Visual Analogue Scale (VAS) preoperatively, at 24 h, 48 h and 7th day after the intervention(s). Clinical and radiographic evaluation was done at 3 months, 6 months and 1 year. The data were statistically analysed using chi-squared test, Mann-Whitney U-test, Friedman's test and Wilcoxon signed-rank test. The significance level was pre-determined at p < .05. Cumulative survival probabilities were assessed at 12 months using Kaplan-Meier analysis. RESULTS: Intra-group analysis of pain scores revealed significant reduction in pain scores preoperatively and at 24 h, 48 h and 7th day in both the groups. However, the difference in the pain score(s) reduction between both the groups was not statistically significant at any time interval (p > .05). At 1-year follow-up, the success rate was 88% (22/25) and 91.6% (22/24) for PP and FP respectively (p > .05). CONCLUSIONS: Partial pulpotomy showed comparable results to full pulpotomy in terms of clinical/radiographic treatment outcome. If the long-term results remain the same, partial pulpotomy can be proposed as an alternative treatment modality for mature teeth with cariously exposed pulp tissue presenting with signs of symptomatic irreversible pulpitis.

Characterization of nano-hydroxyapatite incorporated carboxymethyl chitosan composite on human dental pulp stem cells.

AIM: To compare the odontogenic differentiation potential of a composite scaffold (CSHA) comprising of nano-hydroxyapatite (nHAp) and carboxymethyl chitosan (CMC) with Biodentine on human dental pulp stem cells (hDPSCs). METHODOLOGY: A CSHA scaffold was prepared through an ultrasonication route by adding nHAp and CMC (1:5 w/w) in water medium followed by freeze-drying. Physicochemical characterization was achieved using scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy. In-vitro bioactivity and pH assessments were done by soaking in simulated body fluid (SBF) for 28 days. The angiogenic and odontogenic differentiation abilities were assessed by expression of vascular endothelial growth factor (VEGF) and Dentine sialophosphoprotein (DSPP) markers on cultured hDPSCs by flow cytometry and RT-qPCR at 7, 14 and 21 days. Cell viability/proliferation and biomineralization abilities of CSHA were compared with Biodentine by MTT assay, alkaline phosphatase (ALP) activity, Alizarin Red Staining (ARS) and osteopontin (OPN) expression on hDPSCs following 7 and 14 days. Data were statistically analysed with Kruskal Wallis and Friedman tests as well as one way anova followed by appropriate post hoc tests (p < .05). RESULTS: Characterization experiments revealed a porous microstructure of CSHA with pore diameter ranging between 60 and 200 µm and 1.67 Ca/P molar ratio along with the characteristic functional groups of both HAp and CMC. CSHA displayed bioactivity in SBF by forming apatite-like crystals and maintained a consistent pH value of 7.70 during 28 days' in vitro studies. CSHA significantly upregulated VEGF and DSPP levels on hDPSCs on day 21 compared with day 7 (p < .05). Further, CSHA supported cell viability/proliferation over 14 days like Biodentine with no statistical differences (p > .05). However, CSHA exhibited increased ALP and ARS activity with an intense OPN staining compared with Biodentine after 14 days (p < .05). CONCLUSION: The results highlighted the odontogenic differentiation and biomineralization abilities of CSHA on hDPSCs with significant VEGF and DSPP gene upregulations. Further, CSHA exhibited enhanced mineralization activity than Biodentine, as evidenced by increased ALP, ARS and OPN activity on day 14. The nHAp-CMC scaffold has the potential to act as an effective pulp capping agent; however, this needs to be further validated through in-vivo animal studies.

Micro-CT analysis and leakage of bioceramic retrofillings after ultrasonic and Er:YAG laser cavity preparations: an in vitro study.

The purpose of the study was to determine the influence of preparation techniques on marginal adaptation and sealing of Biodentine™ and TotalFill® RRM bioceramic retrograde fillings. Fifty-two single-root teeth extracted for periodontal reasons were used. Root canals were instrumented using Reciproc Blue #25 and obturated using a single cone technique with an AH Plus® root canal sealer. Retrograde cavities were prepared with Piezomed device (Piezo), Er:YAG laser in short-pulse(SP) and quantum square pulse(QSP) modes and filled with Biodentine™ (BD) or TotalFill® RRM (TF). There were 6 groups (n=8): (1) Piezo BD, (2) Piezo TF, (3) SP BD, (4) SP TF, (5) QSP BD, and (6) QSP TF, and positive and negative controls (n=2). Micro-CT analysis was performed on two samples from each group. Percentage volumes of internal and external voids in apical 1.5 mm were determined. Rhodamine B dye leakage was done on six samples. The samples were cut longitudinally and examined under a stereomicroscope. Digital recordings were analyzed in ImageJ software. The deepest penetration of color in mm was recorded. The data were statistically analyzed using ANOVA and Duncan's test at the level of significance α=0.05. TotalFill® RRM performed significantly better than Biodentine™ in terms of sealing (p<0.05) and marginal adaptation, as evaluated by micro-CT. Sealing was significantly better in SP compared to QSP mode preparations (p<0.05). Differences between Piezomed and laser modes were not significantly different (p>0.05). Sealing was statistically significantly better with TotalFill® RRM compared to Biodentine™ and in Er:YAG SP preparations compared to Er:YAG QSP.

Coronal discoloration induced by calcium silicate-based cements used in full pulpotomy in mature permanent molars: a randomized clinical trial.

OBJECTIVES: This study aimed to randomly compare in vivo coronal discoloration at 6 and 12 months after full pulpotomy in mature permanent molars using MTA, Biodentine, and TotalFill and to investigate the effect of variables such as remaining buccal wall thickness and time to achieve hemostasis. MATERIALS AND METHODS: One hundred eight teeth that met the inclusion criteria received full pulpotomy and were randomly divided into 3 groups via a block randomization technique according to the calcium silicate cement (CSC): ProRoot WMTA, TotalFill, or Biodentine. Assessment of tooth color was carried out using a spectrophotometric device (VITA Easyshade Compact) after composite placement (T0), at 6- and 12-month follow-up. Buccal wall thickness and time to hemostasis were recorded. The primary outcome measure (color change ΔE) was calculated, and the results were analyzed by three-way ANOVA and crosstabulations in relation to material type and effect of variables. RESULTS: Four cases were excluded after pulpotomy failure; 81 teeth were evaluated at 6 months and 95 teeth at 12 months. All CSCs caused tooth discoloration (defined as ΔE > 3.7); MTA significantly caused the highest color change at 6- and 12-month follow-up (76% (19/25) and 87.5% (28/32), respectively) compared to Biodentine (41% (9/22), 48% (13/27)) and TotalFill (44% (15/34), 53% (19/53)) (p = 0.022, p = 0.002), while no significant difference was found between the Biodentine and TotalFill groups (p = 0.813, p = 0.8). Buccal wall thickness (above or below 2.7 mm) had a significant effect on the degree of discoloration (p = 0.004). CONCLUSIONS: The 3 CSCs caused tooth discoloration based on the threshold of ΔE > 3; the remaining buccal wall thickness was a significant factor. The use of Biodentine and TotalFill instead of MTA is encouraged to minimize discoloration. CLINICAL RELEVANCE: While experimental studies report coronal discoloration after CSCs use, clinical data is lacking. This study assessed discoloration using a spectrophotometric device. The use of materials with lower discoloration potential in pulpotomy is encouraged. TRIAL REGISTRATION: The study was registered with clinical trial registration number: NCT04346849 on 14.4.2020.

Comparative evaluation of treatment outcome of partial pulpotomy using different agents in permanent teeth-a randomized controlled trial.

AIM: To compare and evaluate the clinical and radiographic performance, post-operative pain, and anti-inflammatory intake after partial pulpotomy (PP) with calcium hydroxide (CH), mineral trioxide aggregate (MTA), Biodentine (BD), and Emdogain (EMD) as pulp capping agents in mature permanent molars with definitive diagnosis of reversible pulpitis. MATERIALS AND METHODS: As part of this prospective, randomized clinical trial with four parallel arms (CTRI Registration No.: CTRI/2020/11/029329 dated 24/11/2020), hundred and ten permanent molars with a clinical diagnosis of reversible pulpitis and normal apical tissues, from patients between the ages of 15 and 45 years, were recruited and randomly assigned to four groups-CH, MTA, BD, and EMD. Operative procedure was performed under local anesthesia and dental dam isolation. After carious pulpal exposure, 2 mm of superficially inflamed coronal pulp tissue was amputated and either of the four pulp capping materials was placed. The outcome assessment was carried out at 1, 3, 6, and 12 month(s) and was categorized as success (asymptomatic patients with PAI score = 1) or failure (symptomatic patients or PAI score > 1). RESULTS: There was a significant difference in post-operative pain and anti-inflammatory medication intake after partial pulpotomy with Emdogain vis-à-vis other three capping agents. No difference in both clinical and radiographic performances was observed among the four capping agents. CONCLUSION: Partial pulpotomy when performed following evidence-based guidelines results in high success rates regardless of capping agent employed. EMD can be considered a valid and suitable pulp capping agent in PP. CLINICAL RELEVANCE: Meticulous examination and removal of superficially inflamed pulp under magnification and complete asepsis lead to successful pulpal healing regardless of capping agent employed.

Biodentine but not MTA induce DSPP expression of dental pulp cells with different severity of LPS-induced inflammation.

OBJECTIVES: To explore the inflammatory and differentiation response in inflamed dental pulp cells (DPCs) induced by lipopolysaccharide (LPS) under different conditions with Biodentine and mineral trioxide aggregate (MTA) treatment. MATERIALS AND METHODS: DPCs were treated with 0.001-1 µg/mL LPS for different periods to induce inflammation. Normal and inflamed DPCs were further treated with 0.14 mg/mL Biodentine or 0.13 mg/mL MTA for different periods. mRNA expression level of IL-6, IL-8 and ALP were analysed by qPCR. DSPP protein expression was detected by western blot. The data were analysed by the Mann-Whitney test, unpaired t test or two-way ANOVA. RESULTS: After treatment for different times and with different concentrations of LPS, different severity of pulp inflammation was revealed by the expressions of IL-6 and IL-8. Higher concentrations of LPS induced higher IL-6 and IL-8 expressions, and these expressions first increased and then decreased (p < 0.0001). At 96 and 192 h, Biodentine significantly suppressed IL-6 expression in both normal and inflamed DPCs (p < 0.05). At 48 and 96 h, Biodentine suppressed ALP expression in both normal and inflamed DPCs (p < 0.05). At 48 and 96 h, Biodentine induced DSPP expressions in both normal and inflamed DPCs (p < 0.05). CONCLUSION: Biodentine enhanced more DSPP differentiation of both normal and inflamed DPCs under different treatment durations than MTA. CLINICAL RELEVANCE: The prognosis of vital pulp therapy may depend on the severity of pulp inflammation which is difficult to be determined in clinical settings. Therefore, Biodentine may enhance odontogenic differentiation in different severity of pulp inflammation imply its clinical indications.

Biological properties of Ceraputty as a retrograde filling material: an in vitro study on hPDLSCs.

OBJECTIVES: To assess the cytocompatibility and bioactive potential of the new calcium silicate-based cement Ceraputty on human periodontal ligament stem cells (hPDLSCs) compared to Biodentine and Endosequence BC root repair material (ERRM). MATERIALS AND METHODS: hPDLSCs were isolated from extracted third molars from healthy donors. Standardized sample discs and 1:1, 1:2, and 1:4 eluates of the tested materials were prepared. The following assays were performed: surface element distribution via SEM-EDX, cell attachment and morphology via SEM, cell viability via a MTT assay, osteo/cemento/odontogenic marker expression via RT-qPCR, and cell calcified nodule formation via Alizarin Red S staining. hPDLSCs cultured in unconditioned or osteogenic media were used as negative and positive control groups, respectively. Statistical analysis was performed using one-way ANOVA or two-way ANOVA and Tukey's post hoc test. Statistical significance was established at p < 0.05. RESULTS: The highest Ca2+ peak was detected from Biodentine samples, followed by ERRM and Ceraputty. hPDLSC viability was significantly reduced in Ceraputty samples (p < 0.001), while 1:2 and 1:4 Biodentine and ERRM samples similar results to that of the negative control (p > 0.05). Biodentine and ERRM exhibited an upregulation of at least one cemento/odonto/osteogenic marker compared to the negative and positive control groups. Cells cultured with Biodentine produced a significantly higher calcified nodule formation than ERRM and Ceraputty (p < 0.001), which were also higher than the control groups (p < 0.001). CONCLUSION: Ceraputty evidenced a reduced cytocompatibility towards hPDLSCs on its lowest dilutions compared to the other tested cements and the control group. Biodentine and ERRM promoted a significantly higher mineralization and osteo/cementogenic marker expression on hPDLSCs compared with Ceraputty. Further studies are necessary to verify the biological properties of this new material and its adequacy as a retrograde filling material. CLINICAL RELEVANCE: This is the first study to elucidate the adequate biological properties of Ceraputty for its use as a retrograde filling material.

Evaluation of the effectiveness of different treatment approaches in preventing coronal discoloration caused by regenerative endodontic treatment.

OBJECTIVES: This study aimed to evaluate the effectiveness of Teethmate desensitizer, a dentin bonding agent (DBA), Nd:YAG laser, and Er:YAG laser, which provides dentin tubule occlusion in the pulp chamber with different mechanisms, in preventing tooth discoloration due to regenerative endodontic treatment. MATERIALS AND METHODS: One hundred five extracted maxillary human incisors with single roots and single canals were included in the study. The apical third of each tooth was resected below the enamel-cementum junction (CEJ) to obtain a standard root length as 10 ± 1 mm. Root canal preparation was performed using the ProTaper Next files up to X5. Root canals were prepared with Gates Glidden (# 2-4) burs to simulate the immature root apex and an apical diameter of 1.1 ± 0.1 mm was obtained. The teeth were randomly divided into 7 groups (n = 15): DBA, Teethmate, Nd:YAG, Er:YAG, Biodentine, Blood, and Negative Control. Relevant dentin tubule occlusion methods were applied to DBA, Teethmate, Nd:YAG, and Er:YAG groups. Following dentin tubule occlusion procedures, Biodentine was placed on the blood clot after filling the root canals with blood up to 4 mm below the CEJ. No dentin tubule occlusion procedure was applied for Blood and Biodentine groups. Color measurement was performed with the spectrophotometer Vita Easyshade Advance before treatment, immediately after treatment, and at days 7, 30, and 90. Data were converted to L*a*b color values of Commission International de I'Eclairage (CIE L*a*b) and ΔE values were calculated. Two-way ANOVA and post hoc Tukey test (p = 0.05) were performed for statistical analysis. RESULTS: A clinically detectable color change was observed in all groups except for the negative control (ΔE ≥ 3,3). It was observed that Biodentine used alone has a potential for discoloration. It was determined that as the contact time with blood increased, tooth discoloration increased. However, no significant difference was found between dentin tubule occlusion methods in preventing color change (p > 0.05). CONCLUSIONS: It was determined that no dentin tubule occlusion method could 100% prevent discoloration caused by RET. CLINICAL RELEVANCE: DBA and Teethmate, which do not have a significant difference in terms of preventing color change, are considered to be suitable for dentin tubule occlusion due to their ease of application and low cost compared to Nd:YAG laser and Er:YAG laser.

A comparative histological study of the effect of TheraCal LC and biodentine on direct pulp capping in rabbits: an experimental study.

OBJECTIVES: This study histologically compared the effect of TheraCal LC and biodentine on direct pulp capping using a rabbit model. MATERIALS AND METHODS: A direct pulp capping procedure was performed on 40 mandibular central incisors of 20 healthy, male New Zealand white rabbits. TheraCal LC and biodentine were applied to exposed pulp and 10 randomly selected rabbits were euthanized after the first and second week. Incisors were extracted and prepared for histological processing and examination to check the dentine bridge thickness, continuity, and extent of pulp inflammation. A blinded data analysis was performed, and groups were compared using a Wilcoxon signed-rank test while changes across time within each group were assessed using the Mann-Whitney U test. RESULTS: When comparing the dentine bridge thickness, biodentine showed a significantly thicker dentine bridge in the first and second week (mean 28.16 µm, 33.66 µm), while TheraCal LC showed a dentine bridge in the second week only (mean 15.93 µm). Regarding dentine bridge continuity, biodentine showed a significantly better dentine bridge in the first week. Additionally, there was no difference in the second week. Furthermore, there was no statistically significant difference between each of the materials regarding the extent of inflammation. CONCLUSIONS: Biodentine in vivo showed better results concerning thickness and continuity of the dentine bridge after direct pulp capping in rabbit incisors. Both biodentine and TheraCal LC had a similar inflammatory effect on the pulp. CLINICAL RELEVANCE: Biodentine is more successful as a direct pulp capping material compared to TheraCal LC.

Intentional replantation and management of avulsion related ankylosis and external cervical resorption. A 10-year follow up case report.

Replantation is the treatment of choice for avulsed permanent teeth; ankylosis and cervical root resorption are among survival complications. A 9.5-year-old boy presented with an avulsed maxillary permanent central incisor with an open root apex following a school accident. The tooth was kept in milk, after a dry time of 15-20 min. Its replantation was performed 60 min after the accident. At 8 months, apexification with apical plug was attempted upon radiographic evidence of apical periodontitis. Ankylosis sound with infraocclusion and radiographic evidence of external cervical root resorption (ECR) were evident at 3 years and 3 months. At the patient's return one year later with esthetic concerns (2 mm infraocclusion) there was a 5 mm diameter ECR cavity. After intentional atraumatic extraction the resorptive cavity was debrided and restored with Biodentine; subsequently the tooth was reimplanted and splinted at an extruded position. At the 10-year follow up since the first avulsion the tooth remains esthetically pleasing, asymptomatic, non-ankylotic and functional. The present case supports intentional replantation as an option in managing infraoccluded teeth with advanced ECR.