Multimodality imaging reveals angiogenic evolution in vivo during calvarial bone defect healing.

The healing of calvarial bone defects is a pressing clinical problem that involves the dynamic interplay between angiogenesis and osteogenesis within the osteogenic niche. Although structural and functional vascular remodeling (i.e., angiogenic evolution) in the osteogenic niche is a crucial modulator of oxygenation, inflammatory and bone precursor cells, most clinical and pre-clinical investigations have been limited to characterizing structural changes in the vasculature and bone. Therefore, we developed a new multimodality imaging approach that for the first time enabled the longitudinal (i.e., over four weeks) and dynamic characterization of multiple in vivo functional parameters in the remodeled vasculature and its effects on de novo osteogenesis, in a preclinical calvarial defect model. We employed multi-wavelength intrinsic optical signal (IOS) imaging to assess microvascular remodeling, intravascular oxygenation (SO2), and osteogenesis; laser speckle contrast (LSC) imaging to assess concomitant changes in blood flow and vascular maturity; and micro-computed tomography (µCT) to validate volumetric changes in calvarial bone. We found that angiogenic evolution was tightly coupled with calvarial bone regeneration and corresponded to distinct phases of bone healing, such as injury, hematoma formation, revascularization, and remodeling. The first three phases occurred during the initial two weeks of bone healing and were characterized by significant in vivo changes in vascular morphology, blood flow, oxygenation, and maturity. Overall, angiogenic evolution preceded osteogenesis, which only plateaued toward the end of bone healing (i.e., four weeks). Collectively, these data indicate the crucial role of angiogenic evolution in osteogenesis. We believe that such multimodality imaging approaches have the potential to inform the design of more efficacious tissue-engineering calvarial defect treatments.

3D Printed Multifunctional Biomimetic Bone Scaffold Combined with TP-Mg Nanoparticles for the Infectious Bone Defects Repair.

Infected bone defects are one of the most challenging problems in the treatment of bone defects due to the high antibiotic failure rate and the lack of ideal bone grafts. In this paper, inspired by clinical bone cement filling treatment, α-c phosphate (α-TCP) with self-curing properties is composited with ß-tricalcium phosphate (ß-TCP) and constructed a bionic cancellous bone scaffolding system α/ß-tricalcium phosphate (α/ß-TCP) by low-temperature 3D printing, and gelatin is preserved inside the scaffolds as an organic phase, and later loaded with a metal-polyphenol network structure of tea polyphenol-magnesium (TP-Mg) nanoparticles. The scaffolds mimic the structure and components of cancellous bone with high mechanical strength (>100 MPa) based on α-TCP self-curing properties through low-temperature 3D printing. Meanwhile, the scaffolds loaded with TP-Mg exhibit significant inhibition of Staphylococcus aureus (S.aureus) and promote the transition of macrophages from M1 pro-inflammatory to M2 anti-inflammatory phenotype. In addition, the composite scaffold also exhibits excellent bone-enhancing effects based on the synergistic effect of Mg2+ and Ca2+. In this study, a multifunctional ceramic scaffold (α/ß-TCP@TP-Mg) that integrates anti-inflammatory, antibacterial, and osteoinduction is constructed, which promotes late bone regenerative healing while modulating the early microenvironment of infected bone defects, has a promising application in the treatment of infected bone defects.

Melatonin promotes the restoration of bone defects via enhancement of miR-335-5p combined with inhibition of TNFα/NF-κB signaling.

Accelerating the repair of a bone defect is crucial clinically due to the increased prevalence of trauma, tumor, and infections in bone. Studies have found that excess acute and chronic inflammation attenuate osteogenic differentiation of BMSCs (bone marrow mesenchymal stem cells). Moreover, TNF-α and NF-κB could inhibit osteoblasts differentiation of BMSCs and promote osteoclastogenesis via multiple mechanisms, such as increasing osteoclast precursor cells and acting synergistically with cell cytokines. However, melatonin could inhibit the expression of TNFα/NF-κB and promote bone formation by activating the Wnt/ß-catenin signaling pathway. However, there has been no evidence regarding the effect of melatonin on TNFα/NF-κB-inhibited osteoblastogenesis and bone formation. This study aimed to investigate the role of melatonin on TNFα/NF-κB-inhibited osteoblastogenesis and bone formation. Micro-CT, high-throughput screening, overexpression, and other methods were used, and we found that the number of osteoblasts was elevated with melatonin treatment. Additionally, TNFα/NF-κB signaling was inhibited, while miR-335-5p expression increased markedly following treatment with melatonin. Furthermore, miR-335-5p negatively regulated TNFα/NF-κB signaling, while miR-335-5p inhibitor ameliorated the effects of melatonin on TNFα/NF-κB. In conclusion, melatonin facilitates osteogenesis in bone defect healing by enhancing miR-335-5p expression and inhibiting the TNFα/NF-κB pathway.

Polydopamine-mediated immobilization of BMP-2 onto electrospun nanofibers enhances bone regeneration.

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF fromαtoß, thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold's characters were examined using SEM and XRD. To assess its osteogenic effectsin vitro, we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes.In vivo, bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold's effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects.

WNT-modulating gene silencers as a gene therapy for osteoporosis, bone fracture, and critical-sized bone defects.

Treating osteoporosis and associated bone fractures remains challenging for drug development in part due to potential off-target side effects and the requirement for long-term treatment. Here, we identify recombinant adeno-associated virus (rAAV)-mediated gene therapy as a complementary approach to existing osteoporosis therapies, offering long-lasting targeting of multiple targets and/or previously undruggable intracellular non-enzymatic targets. Treatment with a bone-targeted rAAV carrying artificial microRNAs (miRNAs) silenced the expression of WNT antagonists, schnurri-3 (SHN3), and sclerostin (SOST), and enhanced WNT/ß-catenin signaling, osteoblast function, and bone formation. A single systemic administration of rAAVs effectively reversed bone loss in both postmenopausal and senile osteoporosis. Moreover, the healing of bone fracture and critical-sized bone defects was also markedly improved by systemic injection or transplantation of AAV-bound allograft bone to the osteotomy sites. Collectively, our data demonstrate the clinical potential of bone-specific gene silencers to treat skeletal disorders of low bone mass and impaired fracture repair.

Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Macrophage membrane (MMs) camouflaged near-infrared (NIR) responsive bone defect area targeting nanocarrier delivery system (BTNDS) for rapid repair: promoting osteogenesis via phototherapy and modulating immunity.

Bone defects remain a significant challenge in clinical orthopedics, but no targeted medication can solve these problems. Inspired by inflammatory targeting properties of macrophages, inflammatory microenvironment of bone defects was exploited to develop a multifunctional nanocarrier capable of targeting bone defects and promoting bone regeneration. The avidin-modified black phosphorus nanosheets (BP-Avidin, BPAvi) were combined with biotin-modified Icaritin (ICT-Biotin, ICTBio) to synthesize Icaritin (ICT)-loaded black phosphorus nanosheets (BPICT). BPICT was then coated with macrophage membranes (MMs) to obtain MMs-camouflaged BPICT (M@BPICT). Herein, MMs allowed BPICT to target bone defects area, and BPICT accelerated the release of phosphate ions (PO43-) and ICT when exposed to NIR irradiation. PO43- recruited calcium ions (Ca2+) from the microenvironment to produce Ca3(PO4)2, and ICT increased the expression of osteogenesis-related proteins. Additionally, M@BPICT can decrease M1 polarization of macrophage and expression of pro-inflammatory factors to promote osteogenesis. According to the results, M@BPICT provided bone growth factor and bone repair material, modulated inflammatory microenvironment, and activated osteogenesis-related signaling pathways to promote bone regeneration. PTT could significantly enhance these effects. This strategy not only offers a solution to the challenging problem of drug-targeted delivery in bone defects but also expands the biomedical applications of MMs-camouflaged nanocarriers.

Yoda1 pretreated BMSC derived exosomes accelerate osteogenesis by activating phospho-ErK signaling via Yoda1-mediated signal transmission.

Segmental bone defects, arising from factors such as trauma, tumor resection, and congenital malformations, present significant clinical challenges that often necessitate complex reconstruction strategies. Hydrogels loaded with multiple osteogenesis-promoting components have emerged as promising tools for bone defect repair. While the osteogenic potential of the Piezo1 agonist Yoda1 has been demonstrated previously, its hydrophobic nature poses challenges for effective loading onto hydrogel matrices.In this study, we address this challenge by employing Yoda1-pretreated bone marrow-derived mesenchymal stem cell (BMSCs) exosomes (Exo-Yoda1) alongside exosomes derived from BMSCs (Exo-MSC). Comparatively, Exo-Yoda1-treated BMSCs exhibited enhanced osteogenic capabilities compared to both control groups and Exo-MSC-treated counterparts. Notably, Exo-Yoda1-treated cells demonstrated similar functionality to Yoda1 itself. Transcriptome analysis revealed activation of osteogenesis-associated signaling pathways, indicating the potential transduction of Yoda1-mediated signals such as ErK, a finding validated in this study. Furthermore, we successfully integrated Exo-Yoda1 into gelatin methacryloyl (GelMA)/methacrylated sodium alginate (SAMA)/ß-tricalcium phosphate (ß-TCP) hydrogels. These Exo-Yoda1-loaded hydrogels demonstrated augmented osteogenesis in subcutaneous ectopic osteogenesis nude mice models and in rat skull bone defect model. In conclusion, our study introduces Exo-Yoda1-loaded GELMA/SAMA/ß-TCP hydrogels as a promising approach to promoting osteogenesis. This innovative strategy holds significant promise for future widespread clinical applications in the realm of bone defect reconstruction.

Human periodontal ligament stem cell sheets activated by graphene oxide quantum dots repair periodontal bone defects by promoting mitochondrial dynamics dependent osteogenic differentiation.

BACKGROUND: Bone defects in the maxillofacial region restrict the integrity of dental function, posing challenges in clinical treatment. Bone tissue engineering (BTE) with stem cell implants is an effective method. Nanobiomaterials can effectively enhance the resistance of implanted stem cells to the harsh microenvironment of bone defect areas by promoting cell differentiation. Graphene oxide quantum dots (GOQDs) are zero-dimensional nanoscale derivatives of graphene oxide with excellent biological activity. In the present study, we aimed to explore the effects of GOQDs prepared by two methods (Y-GOQDs and B-GOQDs) on the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs), as well as the effect of gelatin methacryloyl (GelMA)-encapsulated GOQD-induced hPDLSC sheets on the repair of mandibular periodontal defects in rats. We also explored the molecular biological mechanism through which GOQD promotes bone differentiation. RESULTS: There were significant differences in oxygen-containing functional groups, particle size and morphology between Y-GOQDs and B-GOQDs. Y-GOQDs promoted the osteogenic differentiation of hPDLSCs more effectively than did B-GOQDs. In addition, GelMA hydrogel-encapsulated Y-GOQD-induced hPDLSC cell sheet fragments not only exhibited good growth and osteogenic differentiation in vitro but also promoted the repair of mandibular periodontal bone defects in vivo. Furthermore, the greater effectiveness of Y-GOQDs than B-GOQDs in promoting osteogenic differentiation is due to the regulation of hPDLSC mitochondrial dynamics, namely, the promotion of fusion and inhibition of fission. CONCLUSIONS: Overall, Y-GOQDs are more effective than B-GOQDs at promoting the osteogenic differentiation of hPDLSCs by regulating mitochondrial dynamics, which ultimately contributes to bone regeneration via the aid of the GelMA hydrogels in vivo.

Magnesium malate-modified calcium phosphate bone cement promotes the repair of vertebral bone defects in minipigs via regulating CGRP.

Active artificial bone substitutes are crucial in bone repair and reconstruction. Calcium phosphate bone cement (CPC) is known for its biocompatibility, degradability, and ability to fill various shaped bone defects. However, its low osteoinductive capacity limits bone regeneration applications. Effectively integrating osteoinductive magnesium ions with CPC remains a challenge. Herein, we developed magnesium malate-modified CPC (MCPC). Incorporating 5% magnesium malate significantly enhances the compressive strength of CPC to (6.18 ± 0.49) MPa, reduces setting time and improves disintegration resistance. In vitro, MCPC steadily releases magnesium ions, promoting the proliferation of MC3T3-E1 cells without causing significant apoptosis, proving its biocompatibility. Molecularly, magnesium malate prompts macrophages to release prostaglandin E2 (PGE2) and synergistically stimulates dorsal root ganglion (DRG) neurons to synthesize and release calcitonin gene-related peptide (CGRP). The CGRP released by DRG neurons enhances the expression of the key osteogenic transcription factor Runt-related transcription factor-2 (RUNX2) in MC3T3-E1 cells, promoting osteogenesis. In vivo experiments using minipig vertebral bone defect model showed MCPC significantly increases the bone volume fraction, bone density, new bone formation, and proportion of mature bone in the defect area compared to CPC. Additionally, MCPC group exhibited significantly higher levels of osteogenesis and angiogenesis markers compared to CPC group, with no inflammation or necrosis observed in the hearts, livers, or kidneys, indicating its good biocompatibility. In conclusion, MCPC participates in the repair of bone defects in the complex post-fracture microenvironment through interactions among macrophages, DRG neurons, and osteoblasts. This demonstrates its significant potential for clinical application in bone defect repair.

Large aplasia cutis congenita of the vertex conservative management.

BACKGROUND: Aplasia cutis congenita (ACC) of the vertex with bone defect is a rare and begnin anomaly that can involve the epidermis, dermis, and subcutaneous tissues of the scalp with significant bone defect Bajpai and Pal (J Pediatr Surg 38(2):e4, 2003). When associated with skull defect, this rare malformation carries the risk of severe complications such as rupture of the superior sagittal sinus or infections. METHODS AND RESULTS: We report a case of aplasia cutis congenita of the scalp with skull defect measuring 9 × 10 cm and an exposed sagittal sinus in a newborn. Both conservative and surgical methods have been proposed to treat this condition. In our case, conservative treatment was planned led to complete epithelization and the patient was healing well at 5 years of follow-up. CONCLUSIONS: ACC of the vertex with a large scalp defects present a management dilemma Rocha et al. (Clin Case Rep 3(10):841-4, 2015). Based on a review of the literature, we report this case to demonstrate that even for the largest skin and bone defects, an initial conservative approach may allow for complete wound closure without the need for early surgical intervention.

Acalvaria: a case report of a rare congenital malformation and a review of the literature.

Acalvaria is a rare congenital malformation characterized by the absence of bones and related muscles in a section of the skull. The number of reported cases in the literature is quite low, and it is generally considered a fatal malformation. We present a case of a newborn diagnosed with acalvaria malformation along with a review of the literature, emphasizing the importance of distinguishing this rare condition from malformations such as anencephaly, exencephaly and acrania. INTRODUCTION: The clinical landscape of acalvaria is scarcely populated, with the malformation often signifying a dire prognosis. Despite the embryological origin and pathogenesis remaining largely enigmatic, it has critical implications for the prenatal and postnatal therapeutic strategies. We investigate a case coupled with a comprehensive literary review to present a clearer clinical portrait and advance the alertness about this lethal anomaly among healthcare providers. DISCUSSION: The rarity of acalvaria constrains the establishment of a definitive incidence rate or a standardized treatment protocol. Varied associations with other neurological and systemic anomalies pose a significant ambiguity regarding its etiopathogenesis. Differential diagnosis remains intricate, relying on nuanced ultrasonographic examinations and an informed interpretation of embryological developments. CONCLUSION: Through our report of an acalvaria-affected newborn undetectable in prenatal ultrasound, we highlight the implications of rarity - the obstacle in uniform diagnosis and the resultant therapeutic challenge. The discussion fosters a need for heightened awareness and consolidating case reports to nurture clinical consensus. Furthermore, it underscores the necessity for multifaceted research efforts towards understanding etiology and optimizing treatment modalities.

Primary acalvaria with open-lip schizencephaly in indigenous South Papuan surviving newborn: a rare case report.

BACKGROUND: Acalvaria, or acrania, is a rare congenital cranial vault defect with neurocranium absences, including complete or part of calvaria flat bones, dura mater, and associated muscles, but with a still present in the central nervous system, skull base, facial bones, and skin-covered the defect. It is a sporadic incidence without apparent genetic factors confirmed. Acalvaria is often misdiagnosed as anencephaly; the distinguishable difference is that anencephaly has an absence (partial or complete) of the brain tissue, including the skull and scalp. Acalvaria is considered a fatal anomaly with a low survival rate, and only a few cases of extended survival have been reported until now. To the best of the author's knowledge, no acalvaria case has been published in Papua, and only one reported case of the coexistence of acalvaria with schizencephaly in Brazil (2018). CASE REPORT: Herein, we present a case of an indigenous South Papuan living newborn with primary acalvaria and open-lip schizencephaly in a frontoparietal region. A male newborn baby was born from a 39-year-old female Marind-Anim tribe patient with a 38th week of gestation, with no previous history of miscarriage, is not a consanguineous marriage, and had an unremarkable medical history during this pregnancy. Post-natal physical examinations showed an irregularly shaped head with 11.5 cm diameter concave of the right side, with a soft brain-like consistency palpable and the absence of half right frontoparietal calvarium covered with a presence of scalp and hair. Cranial 2-dimension ultrasonography shows an absence of half right frontoparietal calvaria bone with a complete presence of scalp and periosteum covering the defect with a fluid accumulation (anechoic) below the periosteum. A transverse axis view shows a complete structure but hypoplasia of brain cortex with visible slightly dysgenesis of gyrus and sulcus in both hemispheres convincing the acalvaria condition not anencephaly. A fluid accumulation above brain parenchyma of the frontoparietal region happened to be a cerebrospinal fluid coming from a wide-open cleft extending from the left lateral and fourth ventricles to the cerebral cortex, suggesting a typical condition of open-lip schizencephaly. Further health follow-ups until 6 months old showed still normal physical and behavioral development with no sign of complications. CONCLUSIONS: No standard acalvaria treatment is being established; conservative and supportive therapy is mostly taken considering their low survival rate. With the advancement of medical technology nowadays, surgical approaches, including scalp defect closure, bone graft, and 3D-printed defect filling, are being performed and have succeeded in a few cases. Long-term follow-up is required to monitor their neuro-psychological development and complication incidences that need further intervention.

Treatment of tibial bone defects caused by infection: a retrospective comparative study of bone transport using a combined technique of unilateral external fixation over an intramedullary nail versus circular external fixation over an intramedullary nail.

BACKGROUND: The purpose of the study was to assess and compare the clinical efficacy of bone transport with either circular or unilateral external fixators over an intramedullary nail in the treatment of tibial bone defects caused by infection. METHODS: Between May 2010 and January 2019, clinical and radiographic data were collected and analyzed for patients with bone defects caused by infection. Thirteen patients underwent bone transport using a unilateral external fixator over an intramedullary nail (Group A), while 12 patients were treated with a circular external fixator over an intramedullary nail (Group B). The bone and functional outcomes of both groups were assessed and compared using the Association for the Study and Application of the Method of the Ilizarov criteria, and postoperative complications were evaluated according to the Paley classification. RESULTS: A total of 25 patients were successfully treated with bone transport using external fixators over an intramedullary nail, with a mean follow-up time of 31.63 ± 5.88 months. There were no significant statistical differences in age, gender, previous surgery per patient, duration of infection, defect size, and follow-up time between Group A and Group B (P > 0.05). However, statistically significant differences were observed in operation time (187.13 ± 21.88 min vs. 255.76 ± 36.42 min, P = 0.002), intraoperative blood loss (39.26 ± 7.33 mL vs. 53.74 ± 10.69 mL, P < 0.001), external fixation time (2.02 ± 0.31 month vs. 2.57 ± 0.38 month, P = 0.045), external fixation index (0.27 ± 0.08 month/cm vs. 0.44 ± 0.09 month/cm, P = 0.042), and bone union time (8.37 ± 2.30 month vs. 9.07 ± 3.12, P = 0.032) between Group A and Group B. The excellent and good rate of bone and functional results were higher in Group A compared to Group B (76.9% vs. 75% and 84.6% vs. 58.3%). Statistically significant differences were observed in functional results (excellent/good/fair/poor, 5/6/2/0 vs. 2/5/4/1, P = 0.013) and complication per patient (0.38 vs. 1.16, P = 0.012) between Group A and Group B. CONCLUSIONS: Bone transport using a combined technique of external fixators over an intramedullary nail proved to be an effective method in treating tibial bone defects caused by infection. In comparison to circular external fixators, bone transport utilizing a unilateral external fixator over an intramedullary nail resulted in less external fixation time, fewer complications, and better functional outcomes.

Bone reconstruction with modified Masquelet technique in open distal femoral fractures: a case series.

BACKGROUND: Large bone defects require complex treatment, multidisciplinary resources, and expert input, with surgical procedures ranging from reconstruction and salvage to amputation. The aim of this study was to provide the results of a case series of open comminuted intra-articular distal femoral fractures with significant bone loss that were managed by early fixation using anatomical plates and a modified Masquelet technique with the addition of surgical propylene mesh. METHODS: This retrospective study included all patients referred to our institution with OTA/AO C3 distal femur open fractures and meta-diaphyseal large bone loss between April 2019 and February 2021. We treated the fractures with irrigation and debridement, acute primary screw and plate fixation in the second look operation, and Masquelet method using shell-shaped antibiotic beads supplemented by propylene surgical mesh to keep the cements in place. The second step of the procedure was conducted six to eight weeks later with bone grafting and mesh augmentation to contain bone grafts. Surprisingly, hard callus formation was observed in all patients at the time of the second stage of Masquelet procedure. RESULTS: All five patients' articular and meta-diaphyseal fractures with bone loss healed without major complications. The average union time was 159 days. The mean knee range of motion was 5-95 degrees. The average Lower Extremity Functional Score (LEFS) was 49 out of 80. CONCLUSIONS: Combination of early plate fixation and the modified Masquelet technique with polypropylene mesh is an effective method for managing large bone defects in open intra-articular distal femoral fractures with bone loss, resulting in shorter union time possibly associated with the callus formation process. This technique may also be applicable to the management of other similar fractures specially in low-income and developing areas.

Free iliac crest grafting technology for the management of critical-sized tibial bone defect.

OBJECTIVE: To introduce the method and experience of treating critical-sized tibial bone defect by taking large iliac crest bone graft. METHODS: From January 2020 to January 2022, iliac crest bone grafting was performed in 20 patients (10 men and 10 women) with critical-sized tibial bone defect. The mean length of bone defect was 13.59 ± 3.41. Bilateral iliac crest grafts were harvested, including the inner and outer plates of the iliac crest and iliac spine. The cortical bone screw was used to integrate two iliac bone blocks into one complex. Locking plate was used to fix the graft-host complex, supplemented with reconstruction plate to increase stability when necessary. Bone healing was evaluated by cortical bone fusion on radiographs at follow-up, iliac pain was assessed by VAS score, and lower limb function was assessed by ODI score. Complications were also taken into consideration. RESULTS: The average follow-up time was 27.4 ± 5.6 (Range 24-33 months), the mean VAS score was 8.8 ± 1.9, the mean ODI score was 11.1 ± 1.8, and the number of cortical bone fusion in the bone graft area was 3.5 ± 0.5. Satisfactory fusion was obtained in all cases of iliac bone transplant-host site. No nonunion, shift or fracture was found in all cases. No infection and bone resorption were observed that need secondary surgery. One patient had dorsiflexion weakness of the great toe. Hypoesthesia of the dorsal foot was observed in 2 patients. Ankle stiffness and edema occurred in 3 patients. Complications were significantly improved by physical therapy and rehabilitation training. CONCLUSION: For the cases of critical-sized tibial bone defect, the treatment methods are various. In this paper, we have obtained satisfactory results by using large iliac bone graft to treat bone defect. This approach can not only restore the integrity of the tibia, but also obtain good stability with internal fixation, and operation skills are more acceptable for surgeons. Therefore, it provides an alternative surgical method for clinicians.

Reconstruction of recurrent shoulder dislocation with glenoid bone defect with 3D-printed titanium alloy pad: outcomes at 2-year minimum follow-up.

BACKGROUND: To evaluate the outcome of shoulder arthroscopy-assisted implantation of three-dimensional (3D)-printed titanium pads for recurrent shoulder dislocation with glenoid bone defects. METHODS: From June 2019 to May 2020, the clinical efficacy of 3D printed titanium pad implantation assisted by shoulder arthroscopy, for the treatment of recurrent shoulder dislocations with shoulder glenoid defects was retrospectively analyzed. The American Shoulder and Elbow Surgeons (ASES) shoulder, Rowe, and Constant scores were recorded before surgery and at 3 months, 6 months, 1 year, and 2 years after surgery. 3D computed tomography (CT) and magnetic resonance imaging were used to evaluate the location of the glenoid pad, bone ingrowth, joint degeneration, and osteochondral damage. RESULTS: The mean age of the 12 patients was 21.4 (19-24) years and the mean follow-up time was 27.6 (24-35) months. The Visual Analog Scale score significantly improved from 5.67 ± 1.98 preoperatively to 0.83 ± 0.58 postoperatively (p = 0.012). The postoperative ASES score was significantly increased to 87.91 ± 3.47 compared with preoperative ASES score (46.79 ± 6.45) (p < 0.01). Rowe and Constant scores also improved from 22.5 ± 12.34 and 56.58 ± 7.59 preoperatively to 90.83 ± 4.69 and 90.17 ± 1.89 at 2 years postoperatively, respectively. CT performed 2 years after surgery showed that the pad perfectly replenished the bone-defective part of the shoulder glenoid and restored the articular surface curvature of the shoulder glenoid in the anterior-posterior direction, and the bone around the central riser of the pad was tightly united. Magnetic resonance imaging 2 years after surgery showed that the humeral head osteochondral bone was intact, and there was no obvious osteochondral damage. CONCLUSIONS: 3D printed titanium pads are a reliable, safe, and effective surgical procedure for treating recurrent shoulder dislocations with glenoid bone defects.

Management of infected bone defects of the femoral shaft by Masquelet technique: sequential internal fixation and nail with plate augmentation.

BACKGROUND: To evaluate the effectiveness of a sequential internal fixation strategy and intramedullary nailing with plate augmentation (IMN/PA) for bone reconstruction in the management of infected femoral shaft defects using the Masquelet technique. METHODS: We performed a retrospective descriptive cohort study of 21 patients (mean age, 36.4 years) with infected bone defects of the femoral shaft treated by the Masquelet technique with a minimum follow-up of 18 months after second stage. After aggressive debridement, temporary stabilisation (T1) was achieved by an antibiotic-loaded bone cement spacer and internal fixation with a bone cement-coated locking plate. At second stage (T2), the spacer and the locking plate were removed following re-debridement, and IMN/PA was used as definitive fixation together with bone grafting. We evaluated the following clinical outcomes: infection recurrence, bone union time, complications, and the affected limb's knee joint function. RESULTS: The median and quartiles of bone defect length was 7 (4.75-9.5) cm. Four patients required iterative debridement for infection recurrence after T1. The median of interval between T1 and T2 was 10 (9-19) weeks. At a median follow-up of 22 (20-27.5) months, none of the patients experienced recurrence of infection. Bone union was achieved at 7 (6-8.5) months in all patients, with one patient experiencing delayed union at the distal end of bone defect due to screws loosening. At the last follow-up, the median of flexion ROM of the knee joint was 120 (105-120.0)°. CONCLUSIONS: For infected femoral shaft bone defects treated by the Masquelet technique, sequential internal fixation and IMN/PA for the reconstruction can provide excellent mechanical stability, which is beneficial for early functional exercise and bone union, and does not increase the rate of infection recurrence.

The Masquelet induced membrane technique with PRP-FG-nHA/PA66 scaffold can heal a rat large femoral bone defect.

BACKGROUND: Masquelet membrane induction technology is one of the treatment strategies for large bone defect (LBD). However, the angiogenesis ability of induced membrane decreases with time and autologous bone grafting is associated with donor site morbidity. This study investigates if the PRP-FG-nHA/PA66 scaffold can be used as a spacer instead of PMMA to improve the angiogenesis ability of induced membrane and reduce the amount of autologous bone graft. METHODS: Platelet rich plasma (PRP) was prepared and PRP-FG-nHA/PA66 scaffold was synthesized and observed. The sustained release of VEGFA and porosity of the scaffold were analyzed. We established a femur LBD model in male SD rats. 55 rats were randomly divided into four groups depending on the spacer filled in the defect area. "Defect only" group (n = 10), "PMMA" group (n = 15), "PRP-nHA/PA66" group (n = 15) and "PRP-FG-nHA/PA66" group (n = 15 ). At 6 weeks, the spacers were removed and the defects were grafted. The induced membrane and bone were collected and stained. The bone formation was detected by micro-CT and the callus union was scored on a three point system. RESULTS: The PRP-FG-nHA/PA66 scaffold was porosity and could maintain a high concentration of VEGFA after 30 days of preparation. The induced membrane in PRP-FG-nHA/PA66 group was thinner than PMMA, but the vessel density was higher.The weight of autogenous bone grafted in PRP-FG-nHA/PA66 group was significantly smaller than that of PMMA group. In PRP-FG-nHA/PA66 group, the bone defect was morphologically repaired. CONCLUSION: The study showed that PRP-FG-nHA/PA66 scaffold can significantly reduce the amount of autologous bone graft, and can achieve similar bone defect repair effect as PMMA. Our findings provide some reference and theoretical support for the treatment of large segmental bone defects in humans.

3D-printed titanium porous prosthesis combined with the Masquelet technique for the management of large femoral bone defect caused by osteomyelitis.

BACKGROUND: The treatment of infected bone defects remains a clinical challenge. With the development of three-dimensional printing technology, three-dimensional printed implants have been used for defect reconstruction. The aim of this study was to investigate the clinical outcomes of three-dimensional printed porous prosthesis in the treatment of femoral defects caused by osteomyelitis. METHODS: Eleven patients with femoral bone defects following osteomyelitis who were treated with 3D-printed porous prosthesis at our institution between May 2017 and July 2021, were included. Eight patients were diagnosed with critical-sized defects, and the other three patients were diagnosed with shape-structural defects. A two-stage procedure was performed for all patients, and the infection was eradicated and bone defects were occupied by polymethylmethacrylate spacer during the first stage. The 3D-printed prosthesis was designed and used for the reconstruction of femoral defects in the second stage. Position of the reconstructed prostheses and bone growth were measured using radiography. The union rate, complications, and functional outcomes at the final follow-up were assessed. RESULTS: The mean length of the bone defect was 14.0 cm, union was achieved in 10 (91%) patients. All patients showed good functional performance at the most recent follow-up. In the critical-sized defect group, one patient developed a deep infection that required additional procedures. Two patients had prosthetic dislocations. Radiography demonstrated good osseous integration of the implant-bone interface in 10 patients. CONCLUSION: The 3D printed prostheses enable rapid anatomical and mechanically stable reconstruction of extreme femur bone defects, effectively shortens treatment time, and achieves satisfactory clinical outcomes.