Construction workers' skin disorders in the Finnish Register of Occupational Diseases 2005-2016.

BACKGROUND: Construction workers are a known risk group for occupational skin disease (OSD). OBJECTIVES: To study diagnoses and causes of OSD in construction workers in the Finnish Register of Occupational Diseases (FROD) 2005-2016. MATERIALS AND METHODS: We searched the FROD for dermatological cases in (a) construction-related occupations defined by the International Standard Classification of Occupations (ISCO-08) and (b) in the industrial branch of construction defined by the Statistical Classification of Economic Activities in the European Community (NACE Rev. 2). RESULTS: The two searches yielded the same number of cases, 329, although they were not identical subgroups. The number of allergic contact dermatitis (ACD) cases was 235 (71%) in construction-related occupations and 228 (69%) in the industrial branch of construction. In the latter analysis, synthetic resin systems caused 66% of ACD cases and 46% of all OSDs, epoxy compounds being the leading cause (122 cases; 54% of ACD cases; 37% of all OSDs). Metals were the second most common group of causes of ACD with 31 cases (chrome 22 cases; cobalt 8 cases). Isothiazolinones caused ACD in 21 cases, many of whom were painters. CONCLUSIONS: ACD dominated the OSDs of construction workers and epoxy products were by far the leading cause comprising 37% of all OSDs. Chrome and isothiazolinones were also prominent causes of ACD.

Lung cancer risk among bricklayers in a pooled analysis of case-control studies.

Bricklayers may be exposed to several lung carcinogens, including crystalline silica and asbestos. Previous studies that analyzed lung cancer risk among these workers had several study design limitations. We examined lung cancer risk among bricklayers within SYNERGY, a large international pooled analysis of case-control studies on lung cancer and the joint effects of occupational carcinogens. For men ever employed as bricklayers we estimated odds ratios (OR) and 95% confidence intervals (CI) adjusted for study center, age, lifetime smoking history and employment in occupations with exposures to known or suspected lung carcinogens. Among 15,608 cases and 18,531 controls, there were 695 cases and 469 controls who had ever worked as bricklayers (OR: 1.47; 95% CI: 1.28-1.68). In studies using population controls the OR was 1.55 (95% CI: 1.32-1.81, 540/349 cases/controls), while it was 1.24 (95% CI: 0.93-1.64, 155/120 cases/controls) in hospital-based studies. There was a clear positive trend with length of employment (p < 0.001). The relative risk was higher for squamous (OR: 1.68, 95% CI: 1.42-1.98, 309 cases) and small cell carcinomas (OR: 1.78, 95% CI: 1.44-2.20, 140 cases), than for adenocarcinoma (OR: 1.17, 95% CI: 0.95-1.43, 150 cases) (p-homogeneity: 0.0007). ORs were still elevated after additional adjustment for education and in analyses using blue collar workers as referents. This study provided robust evidence of increased lung cancer risk in bricklayers. Although non-causal explanations cannot be completely ruled out, the association is plausible in view of the potential for exposure to several carcinogens, notably crystalline silica and to a lesser extent asbestos.

Influence of brick laying height on biomechanical load in masons: Cross-sectional field study with technical measurements.

BACKGROUND: Work-related musculoskeletal disorders (WMSDs) located in the low back and neck/shoulder regions are major concerns for both workers, workplaces, and society. Masons are prone to WMSD, because their work is characterized by repetitive work and high physical workload. However, the knowledge on the physical workload during bricklaying is primarily based on subjective measurements. OBJECTIVE: This cross-sectional field study with technical measurements aimed to quantify physical workload in terms of muscular activity and degree of forward bending during bricklaying at different working heights among masons, i.e., knee, hip, shoulder, and above shoulder height. METHODS: Twelve male (36.1±16.1 years) experienced masons participated in a cross-sectional field study with technical measurements. Surface electromyography from erector spinae longissimus and upper trapezius muscles and an inertial measurement unit-sensor placed on the upper back were used to assess the physical workload (level of muscle activation and degree of forward bending) different bricklaying heights. Manual video analysis was used to determine duration of work tasks, frequency, type, and working height. The working heights were categorized as 'knee', 'hip', 'shoulder', and 'above shoulder'. The 95 percentiles of the normalized Root Mean Square (RMSn) values were extracted assess from erector spinae and trapezius recordings to assess strenuous level muscle of muscle activation. RESULTS: The RMSn of dominant erector spinae muscle increased from hip- to shoulder height (from 26.6 to 29.6, P < 0.0001), but not from hip to above shoulder height and decreased from hip to knee height (from 26.6 to 18.9, P < 0.0001). For the dominant trapezius muscle, the RMSn increased from hip- to shoulder- and above shoulder height (from 13.9 to 19.7 and 24.0, respectively, P < 0.0001) but decreased from hip- to knee height (from 13.9 to 11.5, P < 0.0001). Compared to hip height (27.9°), an increased forward bending was detected during bricklaying at knee height (34.5°, P < 0.0001) and a decreased degree of forward bending at shoulder- and above shoulder height (17.6° and 12.5°, P < 0.0001, respectively). CONCLUSION: Based on technical measurements, bricklaying at hip height showed the best compromise between muscular load and degree of forward bending. This study contributes to the development of the work environment for masons and can help guide preventive initiatives to reduce physical workload.

Preventing occupational injuries in the informal construction industry: a study protocol for the development of a safety education intervention for bricklayers and carpenters in Osun State, Nigeria.

Background: Occupational injuries are a growing public health problem. Approximately 1,000 workers die daily from occupational injuries globally. Artisans working in the informal sector of the construction industry in many low/middle income countries like Nigeria have a higher injury predisposition. This study will assess the determinants of occupational injuries and design a safety intervention for informal sector artisans in the Nigerian construction industry. Methods: A sequential mixed-methods design will be employed to study 840 bricklayers and carpenters (420 per artisan group) in Osun State, Nigeria. Quantitative data will be collected first while qualitative data will be collected thereafter. Thirdly, a modified Delphi-technique will be employed to co-design a safety education intervention. For the quantitative study, artisans will be recruited via multi-stage sampling and a semi-structured questionnaire will be administered to obtain information on artisans' socio-demographics, work-patterns and occupational injuries. A multivariable regression model will be used to determine the association between injury occurrence and independent variables. Twelve to sixteen focus group discussion (FGD) sessions will be conducted for artisans to obtain group perspectives about injuries and preferred safety training topics. From the FGD and quantitative study findings, a list of items for the safety training module will be compiled for the modified-Delphi process. Thereafter, the content validation index (CVI) will be derived and items with CVI of ≥0.80 will be included in the final safety training module. Conclusion: This paper describes the process required to assess the determinants of occupational injuries among artisans in the informal sector of the construction industry in Nigeria and further proposes the design of a context-relevant safety training intervention. The information from this study will be essential in promoting safe working environments for construction artisans.

Prevalence and pattern of work-related musculoskeletal disorders among Nigerian bricklayers.

BACKGROUND: Typically, bricklayers in developing countries' contexts manually lay bricks, concrete blocks and other similar materials to construct walls and buildings which make them susceptible to work-related musculoskeletal disorders (WRMSDs). The burden of WRMSDs among this high-risk group seems has not been well documented. OBJECTIVES: This study examined the prevalence of WRMSDs among bricklayers in Nigeria. METHODS: A cross-sectional survey of 118 consenting bricklayers from a Nigerian setting was carried out. The standardized Nordic musculoskeletal disorder questionnaire and a proforma were used to profile the prevalence of WRMSDs and socio-demographic information of the respondents. Data was analyzed using descriptive and inferential statistics. Alpha level was set at p < 0.05. RESULTS: The 12-months and 7-days prevalence of WRMSDs were 87.3% and 67.4%. Shoulder (61.0%) and the low-back (59.3%) were the two most affected anatomical sites based on 12-month prevalence. WRMSDs affecting the knees (6.8%) was the most disabling in carrying normal work routines. Working for less than 10 years was significantly associated with high prevalence of WRMSDs in the shoulder (odd ratio (OR) = 0.27, 95% confidence interval (CI) = 0.09 to 0.87) and wrist region (OR = 0.24, 95% CI 0.08 to 0.73). Having neck pain led to higher odds (OR = 0.29, 95% CI 0.13 to 0.68) of taking a break from work among the bricklayers. CONCLUSIONS: WRMSDs were high among Nigerian bricklayers. Years of work experience was associated with high prevalence of WRMSDs in the shoulder and wrist. In addition, taking work breaks was associated with neck pain.

Occupational contact allergy in bricklayers, tile setters etc. - Current spectrum of sensitization and recent time trends.

BACKGROUND: Occupational exposure of bricklayers, construction workers, tile setters etc. has changed during the last years. For some years now, all manually handled cement in the European Union and in Switzerland is chromate-reduced. Epoxy resin systems are being used in more and more fields of application. Improved worker's protection, especially wearing protective gloves, is promoted. These changes influence the spectrum of occupational contact sensitization. OBJECTIVE: Description of the current allergen spectrum in patients working in the building trade who suffer from occupational contact dermatitis. MATERIAL AND METHODS: Retrospective analysis of data of the Information Network of Departments of Dermatology (IVDK), 2009 - 2011. RESULTS: During the study period, 245 bricklayers, construction workers, tile setters etc. with occupational dermatitis have been patch tested. Potassium dichromate was the most frequent allergen, yielding 15.1% positive reactions, followed by epoxy resin with 13.7% positive reactions. Beyond that, there were 8 additional components of epoxy resin systems (5 reactive diluents and 3 amine hardeners), as well as 9 rubber ingredients, mainly thiurams, among the 30 most frequent allergens. In the course of time, a decline of chromate sensitization could be noted, paralleled by a decline of cobalt sensitization. In contrast, sensitization to epoxy resin has increased. CONCLUSION: Thanks to the usage of chromate-reduced cement, chromate sensitization continues to decline in the building trade. The increase of epoxy resin sensitization must prompt intensified prevention efforts. When recommending protective gloves, thiuram-free products should be preferred. The most important allergens are covered by the following test series recommended by the German Contact Dermatitis Research Group (DKG): DKG baseline series, DKG test series "building trade", DKG rubber series.