Identification and characterization of the RcTCP gene family and its expression in response to abiotic stresses in castor bean.

BACKGROUND: The TCP (teosinte branched1/cincinnata/proliferating cell factor) family plays a prominent role in plant development and stress responses. However, TCP family genes have thus far not been identified in castor bean, and therefore an understanding of the expression and functional aspects of castor bean TCP genes is lacking. To identify the potential biological functions of castor bean (RcTCP) TCP members, the composition of RcTCP family members, their basic physicochemical properties, subcellular localizations, interacting proteins, miRNA target sites, and gene expression patterns under stress were assessed. RESULTS: The presence of 20 RcTCP genes on the nine chromosomes of castor bean was identified, all of which possess TCP domains. Phylogenetic analysis indicated a close relationship between RcTCP genes and Arabidopsis AtTCP genes, suggesting potential functional similarity. Subcellular localization experiments confirmed that RcTC01/02/03/10/16/18 are all localized in the nucleus. Protein interaction analysis revealed that the interaction quantity of RcTCP03/06/11 proteins is the highest, indicating a cascade response in the functional genes. Furthermore, it was found that the promoter region of RcTCP genes contains a large number of stress-responsive elements and hormone-induced elements, indicating a potential link between RcTCP genes and stress response functions. qRT-PCR showed that all RcTCP genes exhibit a distinct tissue-specific expression pattern and their expression is induced by abiotic stress (including low temperature, abscisic acid, drought, and high salt). Among them, RcTCP01/03/04/08/09/10/14/15/18/19 genes may be excellent stress-responsive genes. CONCLUSION: We discovered that RcTCP genes play a crucial role in various activities, including growth and development, the stress response, and transcription. This study provides a basis for studying the function of RcTCP gene in castor.

The neuroblast timer gene nubbin exhibits functional redundancy with gap genes to regulate segment identity in Tribolium.

The neuroblast timer genes hunchback, Krüppel, nubbin and castor are expressed in temporal sequence in neural stem cells, and in corresponding spatial sequence along the Drosophila blastoderm. As canonical gap genes, hunchback and Krüppel play a crucial role in insect segmentation, but the roles of nubbin and castor in this process remain ambiguous. We have investigated the expression and functions of nubbin and castor during segmentation in the beetle Tribolium. We show that Tc-hunchback, Tc-Krüppel, Tc-nubbin and Tc-castor are expressed sequentially in the segment addition zone, and that Tc-nubbin regulates segment identity redundantly with two previously described gap/gap-like genes, Tc-giant and Tc-knirps. Simultaneous knockdown of Tc-nubbin, Tc-giant and Tc-knirps results in the formation of ectopic legs on abdominal segments. This homeotic transformation is caused by loss of abdominal Hox gene expression, likely due to expanded Tc-Krüppel expression. Our findings support the theory that the neuroblast timer series was co-opted for use in insect segment patterning, and contribute to our growing understanding of the evolution and function of the gap gene network outside of Drosophila.

QTL mapping and candidate gene mining of seed size and seed weight in castor plant (Ricinus communis L.).

BACKGROUND: Castor (Ricinus communis L., 2n = 2x = 20) is an important industrial crop, due to its oil is very important to the global special chemical industry. Seed size and seed weight are fundamentally important in determining castor yield, while little is known about it. In this study, QTL analysis and candidate gene mining of castor seed size and seed weight were conducted with composite interval mapping (CIM), inclusive composite interval mapping (ICIM) and marker enrichment strategy in 4 populations, i.e., populations F2, BC1, S1-1 and S1-2, derived from 2 accessions with significant phenotypic differences. RESULTS: In the QTL primary mapping, 2 novel QTL clusters were detected in marker intervals RCM520-RCM76 and RCM915-RCM950. In order to verify their accuracy and to narrow their intervals, QTL remapping was carried out in populations F2 and BC1. Among them, 44 and 30 QTLs underlying seed size and seed weight were detected in F2 population using methods CIM and ICIM-ADD respectively, including 4-9 and 3-5 ones conferring each trait were identified with a phenotypic variation explained ranged from 37.92 to 115.81% and 32.86-45.98% respectively. The remapping results in BC1 population were consistent with those in F2 population. Importantly, 3 QTL clusters (i.e. QTL-cluster1, QTL-cluster2 and QTL-cluster3) were found in marker intervals RCM74-RCM76 (37.1 kb), RCM930-RCM950 (259.8 kb) and RCM918-RCM920 (172.9 kb) respectively; in addition, all of them were detected again, the former one was found in the S1-2 population, and the latter two were found simultaneously in the populations S1-1 and S1-2. Finally, 6 candidate genes (i.e. LOC8266555, LOC8281168, LOC8281151, LOC8259066, LOC8258591 and LOC8270077) were screened in the above QTL clusters, they were differentially expressed in multiple seed tissues of both parents, signifying the potential role in regulating seed size and seed weight. CONCLUSION: The above results not only provide new insights into the genetic structure of seed size and seed weight in castor, but also lay the foundation for the functional identification of these candidate genes.

Screening and functional verification of drought resistance-related genes in castor bean seeds.

Drought is one of the natural stresses that greatly impact plants. Castor bean (Ricinus communis L.) is an oil crop with high economic value. Drought is one of the factors limiting castor bean growth. The drought resistance mechanisms of castor bean have become a research focus. In this study, we used castor germinating embryos as experimental materials, and screened genes related to drought resistance through physiological measurements, proteomics and metabolomics joint analysis; castor drought-related genes were subjected to transient silencing expression analysis in castor leaves to validate their drought-resistant functions, and heterologous overexpression and backward complementary expression in Arabidopsis thaliana, and analysed the mechanism of the genes' response to the participation of Arabidopsis thaliana in drought-resistance.Three drought tolerance-related genes, RcECP 63, RcDDX 31 and RcA/HD1, were obtained by screening and analysis, and transient silencing of expression in castor leaves further verified that these three genes corresponded to drought stress, and heterologous overexpression and back-complementary expression of the three genes in Arabidopsis thaliana revealed that the function of these three genes in drought stress response.In this study, three drought tolerance related genes, RcECP 63, RcDDX 31 and RcA/HD1, were screened and analysed for gene function, which were found to be responsive to drought stress and to function in drought stress, laying the foundation for the study of drought tolerance mechanism in castor bean.

Engineering Yarrowia lipolytica for sustainable ricinoleic acid production: A pathway to free fatty acid synthesis.

Ricinoleic acid (C18:1-OH, RA) is a valuable hydroxy fatty acid with versatile applications. The current industrial source of RA relies on the hydrolysis of castor bean oil. However, the coexistence of the toxic compound ricin and the unstable supply of this plant have led to an exploration of promising alternatives: generating RA in heterologous plants or microorganisms. In this study, we engineered the oleaginous yeast Yarrowia lipolytica to produce RA in the form of free fatty acids (FFA). First, we overexpressed fungal Δ12 oleate hydroxylase gene (CpFAH12) from Claviceps purpurea while deleting genes related to fatty acid degradation (MEF1 and PEX10) and oleic acid desaturation (FAD2). Since Δ12 oleate hydroxylase converts oleic acid (C18:1) located at the sn-2 position of phosphatidylcholine (PC), we next focused on increasing the PC pool containing oleic acid. This objective was achieved thorough implementing metabolic engineering strategies designed to enhance the biosynthesis of PC and C18 fatty acids. To increase the PC pool, we redirected the flux towards phospholipid biosynthesis by deleting phosphatidic acid phosphatase genes (PAH1 and APP1) and diacylglycerol acyltransferase gene (DGA1), involved in the production of diacylglycerol and triacylglycerol, respectively. Furthermore, the PC biosynthesis via the CDP-DAG pathway was enhanced through the overexpression of CDS1, PSD1, CHO2, and OPI3 genes. Subsequently, to increase the oleic acid content within PC, we overexpressed the heterologous fatty acid elongase gene (MaC16E) involved in the conversion of C16 to C18 fatty acids. As RA production titer escalated, the produced RA was mainly found in the FFA form, leading to cell growth inhibition. The growth inhibition was mitigated by inducing RA secretion via Triton X-100 treatment, a process that simultaneously amplified RA production by redirecting flux towards RA synthesis. The final engineered strain JHYL-R146 produced 2.061 g/L of free RA in a medium treated with 5% Triton X-100, constituting 74% of the total FFAs produced. Generating free RA offers the added benefit of bypassing the hydrolysis stage required when employing castor bean oil as an RA source. This achievement represents the highest level of RA synthesis from glucose reported thus far, underscoring the potential of Y. lipolytica as a host for sustainable RA production.

Methods for the induction of labor: efficacy and safety.

This review assessed the efficacy and safety of pharmacologic agents (prostaglandins, oxytocin, mifepristone, hyaluronidase, and nitric oxide donors) and mechanical methods (single- and double-balloon catheters, laminaria, membrane stripping, and amniotomy) and those generally considered under the rubric of complementary medicine (castor oil, nipple stimulation, sexual intercourse, herbal medicine, and acupuncture). A substantial body of published reports, including 2 large network meta-analyses, support the safety and efficacy of misoprostol (PGE1) when used for cervical ripening and labor induction. Misoprostol administered vaginally at doses of 50 µg has the highest probability of achieving vaginal delivery within 24 hours. Regardless of dosing, route, and schedule of administration, when used for cervical ripening and labor induction, prostaglandin E2 seems to have similar efficacy in decreasing cesarean delivery rates. Globally, although oxytocin represents the most widely used pharmacologic agent for labor induction, its effectiveness is highly dependent on parity and cervical status. Oxytocin is more effective than expectant management in inducing labor, and the efficacy of oxytocin is enhanced when combined with amniotomy. However, prostaglandins administered vaginally or intracervically are more effective in inducing labor than oxytocin. A single 200-mg oral tablet of mifepristone seems to represent the lowest effective dose for cervical ripening. The bulk of the literature assessing relaxin suggests this agent has limited benefit when used for this indication. Although intracervical injection of hyaluronidase may cause cervical ripening, the need for intracervical administration has limited the use of this agent. Concerning the vaginal administration of nitric oxide donors, including isosorbide mononitrate, isosorbide, nitroglycerin, and sodium nitroprusside, the higher incidence of side effects with these agents has limited their use. A synthetic hygroscopic cervical dilator has been found to be effective for preinduction cervical ripening. Although a pharmacologic agent may be administered after the use of the synthetic hygroscopic dilator, in an attempt to reduce the interval to vaginal delivery, concomitant use of mechanical and pharmacologic methods is being explored. Combining the use of a single-balloon catheter with dinoprostone, misoprostol, or oxytocin enhances the efficacy of these pharmacologic agents in cervical ripening and labor induction. The efficacy of single- and double-balloon catheters in cervical ripening and labor induction seems similar. To date, the combination of misoprostol with an intracervical catheter seems to be the best approach when balancing delivery times with safety. Although complementary methods are occasionally used by patients, given the lack of data documenting their efficacy and safety, these methods are rarely used in hospital settings.

Midterm Outcomes of Multicenter Castor Single-Branch Stent Graft Use in the Treatment of Thoracic Aortic Diseases.

PURPOSE: The aim of this study was to evaluate the midterm efficacy and safety of a single-branch Castor stent graft in the treatment of thoracic aortic disease. MATERIALS AND METHODS: Clinical data of 106 patients with thoracic aortic disease treated with Castor single-branch stent graft at 3 centers were collected between May 2018 and June 2023. The indicators included technical success, stent-related complication, reintervention, retrograde dissection, endoleak, distal stent graft-induced entry (dSINE), branch patency, and mortality. The outcomes of the Castor stent graft for multibranch reconstruction above the arch was also analyzed. RESULTS: The technical success was 98.1% (104/106), while the surgical success was 93.4% (99/106). The reintervention was 2.8% (3/106), consisting of a case of retrograde type A dissection, an endoleak, and a dSINE. The retrograde dissection was 1.9% (2/106), while type I endoleak was 1.9% (2/106). The new dSINE was 2.8% (3/106), and the branch patency rate was 100%. The mortality was 1.9% (2/106). The mean follow-up time was 29.1±17.7 months. The 2-year post-surgery cumulative survival rate was 91.0%±3.1%, while the cumulative branch patency rate was 96.2%±2.2%. In addition, the cumulative freedom from stent-related reintervention rate was 93.2%±2.8%. A comparison showed no significant difference in the stent-related complication, branch patency, endoleak, reintervention, and mortality when the proximal end of the Castor stent graft was anchored to zones 1 or 2 of the aorta. CONCLUSION: Castor single-branch stent graft showed favorable early and midterm outcomes in the treatment of thoracic aortic disease. In addition, it was feasible to combine Castor stent graft with other advanced techniques for multibranch aortic arch reconstruction. CLINICAL IMPACT: The Castor single-branch stent graft was approval by the Chinese Food and Drug Administration in 2017. However, there were few studies on the mid-term outcomes for thoracic aortic disease after launching, which mainly focused on small single-center retrospective study. In the study, we assessed the mid-term outcomes of Castor stent graft through multi-center cases, Castor stent graft combined with other advanced techniques (such as fenestration and hybrid) for multi-branch reconstruction of aortic arch were also conducted. We found Castor single-branch stent graft showed favorable early and mid-term outcomes in the treatment of thoracic aortic disease. Additionally, it was feasible to combine Castor stent graft with other advanced technique for multi-branch aortic arch reconstruction. As an off-the-shelf branched stent graft with a wide range of models, it could be also used in most emergent situation. The Castor stent graft was expected to become more widely used in the future.

Combating Alcohol Adduct Impurity in Immunosuppressant Drug Product Manufacturing: A Scientific Investigation for Enhanced Process Control.

OBJECTIVE: This research aims to elucidate critical impurities in process validation batches of tacrolimus injection formulations, focusing on identification and characterization of previously unreported impurity at RRT 0.42, identified as the tacrolimus alcohol adduct. The potential root causes for the formation of new impurity was determined using structured risk assessment by cause and effect fishbone diagram. The primary objective was to propose mitigation plan and demonstrate the control of impurities with 6 month accelerated stability results in development batches. METHODS: The investigation utilizes method validation and characterization studies to affirm the accuracy of quantifying the tacrolimus alcohol adduct. The research methodology employed different characterization techniques like rotational rheometer, ICP‒MS, MALDI-MS, 1H NMR, 13C NMR, and DEPT-135 NMR for structural elucidation. Additionally, the exact mass of the impurity is validated using electrospray ionization mass spectra. RESULTS: Results indicate successful identification and characterization of the tacrolimus alcohol adduct. The study further explores the transformation of Tacrolimus monohydrate under various conditions, unveiling the formation of Tacrolimus hydroxy acid and proposing the existence of a novel degradation product, the Tacrolimus alcohol adduct. Six-month data from development lots utilizing Manufacturing Process II demonstrate significantly lower levels of alcohol adducts. CONCLUSIONS: Manufacturing Process II, selectively locates Tacrolimus within the micellar core of HCO-60, this prevent direct contact of ethanol with Tacrolimus which minimizes impurity alcohol adduct formation. This research contributes to the understanding of tacrolimus formulations, offering ways to safeguard product integrity and stability during manufacturing and storage.

Clinical comparative analysis of 3D printing-assisted extracorporeal pre-fenestration and Castor integrated branch stent techniques in treating type B aortic dissections with inadequate proximal landing zones.

BACKGROUND: This study aims to compare the clinical effects of two distinct surgical approaches, namely 3D printing-assisted extracorporeal pre-fenestration and Castor integrated branch stent techniques, in treating patients with Stanford type B aortic dissections (TBAD) characterized by inadequate proximal landing zones. METHODS: A retrospective analysis was conducted on 84 patients with type B aortic dissection (TBAD) who underwent thoracic endovascular aortic repair (TEVAR) with left subclavian artery (LSA) reconstruction at our center from January 2022 to July 2023. Based on the different surgical approaches, the patients were divided into two groups: the group assisted by 3D printing for extracorporeal pre-fenestration (n = 44) and the group using the castor integrated branch stent (n = 40). Clinical indicators: including general patient information, operative time, surgical success rate, intraoperative and postoperative complication rates, re-intervention rate, and mortality, as well as postoperative aortic remodeling, were compared between the two groups. The endpoint of this study is the post-TEVAR mortality rate in patients. RESULTS: The surgical success rate and device deployment success rate were 100% in both groups, with no statistically significant difference (P > 0.05). However, the group assisted by 3D printing for extracorporeal pre-fenestration had a significantly longer operative time (184.20 ± 54.857 min) compared to the group using the castor integrated branch stent (152.75 ± 33.068 min), with a statistically significant difference (t = 3.215, p = 0.002, P < 0.05). Moreover, the incidence of postoperative cerebral infarction and beak sign was significantly lower in the group assisted by 3D printing for extracorporeal pre-fenestration compared to the castor-integrated branch stent group, demonstrating statistical significance. There were no significant differences between the two groups in terms of other postoperative complication rates and aortic remodeling (P > 0.05). Notably, computed tomography angiography images revealed the expansion of the vascular true lumen and the reduction of the false lumen at three specified levels of the thoracic aorta. The follow-up duration did not show any statistically significant difference between the two groups (10.59 ± 4.52 vs. 9.08 ± 4.35 months, t = 1.561, p = 0.122 > 0.05). Throughout the follow-up period, neither group experienced new endoleaks, spinal cord injuries, nor limb ischemia. In the castor-integrated branch stent group, one patient developed a new distal dissection, prompting further follow-up. Additionally, there was one case of mortality due to COVID-19 in each group. There were no statistically significant differences between the two groups in terms of re-intervention rate and survival rate (P > 0.05). CONCLUSION: Both 3D printing-assisted extracorporeal pre-fenestration TEVAR and castor-integrated branch stent techniques demonstrate good safety and efficacy in treating Stanford type B aortic dissection with inadequate proximal anchoring. The 3D printing-assisted extracorporeal pre-fenestration TEVAR technique has a lower incidence of postoperative cerebral infarction and beak sign, while the castor-integrated branch stent technique has advantages in operative time.

Comparison of the novel Ankura Plus stent and Castor stent for the treatment of Stanford type B aortic dissection with an insufficient proximal anchoring area.

OBJECTIVE: To compare the efficacy and safety of the Ankura Plus and Castor stents in Stanford type B aortic dissection (TBAD) with an insufficient proximal anchoring area. METHODS: Between January 2020 and October 2022, 54 patients with TBAD were enrolled, including 16 patients with Ankura Plus stents and 38 patients with Castor stents. Data from the two stents were retrospectively analyzed. RESULTS: The surgical success rate for both stents was 100%, and no endoleaks or deaths occurred during hospitalization. The Ankura Plus stent group had a longer surgery time than the Castor stent group (122.6±5.1 vs. 103.7±10.0, P ＜0.001). After an average follow-up of 12 months, the patency rates of the main and branch stents were 100% in both groups. The diameter of the true lumen (TL) was significantly increased, the diameter of the false lumen (FL) was reduced, and there was no statistically significant difference in the probability of complete thrombosis of the FL (68.8% vs. 67.6%, P=0.993). There were no significant differences in the incidences of renal failure (6.3% vs. 8.1%, P = 0.814), stroke (6.3% vs. 2.7%, P = 0.520), or endoleaks (6.3% vs. 10.5%, P = 0.621) between the Ankura Plus and Castor stent groups. One patient in the Castor stent group underwent reintervention because of a type I endoleak three months after surgery. One patient in the Ankura Plus stent group had an additional covered stent placed after one month due to distal TL stenosis of the main stent. One patient in the Castor stent group died of renal failure four months after surgery. CONCLUSION: Both the Ankura Plus and Castor stents are feasible, safe, and effective in the treatment of TBAD with an insufficient proximal anchoring area. Additional long-term studies are required to evaluate the robustness and applicability of Ankura Plus stents.

Bio-based polyester-polyurethane foams: synthesis and degradability by Aspergillus niger and Aspergillus clavatus.

In this article, the degradability by Aspergillus niger and Aspergillus clavatus of three bio-based polyurethane (PU) foams is compared to previous degradability studies involving a Pseudomonas sp. bacterium and similar initial materials (Spontón et al. in Int. Biodet. Biodeg. 85:85-94, 2013, https://doi.org/10.1016/j.ibiod.2013.05.019 ). First, three new polyester-polyurethane foams were prepared from mixtures of castor oil (CO), maleated castor oil (MACO), toluene diisocyanate (TDI), and water. Then, their degradation tests were carried out in an aqueous medium, and employing the two mentioned fungi, after their isolation from the environment. From the degradation tests, the following was observed: (a) the insoluble (and slightly collapsed) foams exhibited free hydroxyl, carboxyl, and amine moieties; and (b) the water soluble (and low molar mass) compounds contained amines, carboxylic acids, and glycerol. The most degraded foam contained the highest amount of MACO, and therefore the highest concentration of hydrolytic bonds. A basic biodegradation mechanism was proposed that involves hydrolysis and oxidation reactions.

Beaver-related restoration: An opportunity for sandy lowland streams in a human-dominated landscape.

The expansion of beavers into human-dominated landscapes can help improve the ecological status of degraded streams. This study aimed to assess the changes in the ecological status of a degraded sandy-bottom stream under the influence of processes generated by the activity of a European beaver. We assumed that the processes in the beaver dam-and-pond complex significantly improved the physical, chemical, and bacteriological properties of water and improved the ecological status of a small lowland stream in a human-dominated landscape. To achieve these objectives, water for quality assessment, benthic invertebrates, and fish samples were collected, and the forms of land use and the natural values of the stream were analysed. In the upstream zone of the sandy-bottom stream flowing in a human-dominated landscape, the inflow of pollutants caused a significant reduction in water quality. The amount of nutrients was high and the amount of dissolved oxygen was low. Similarly, the number of meso- and psychrophilic bacteria was significantly higher than in the reference stream. The building activity of beavers initiated a series of positive environmental changes, and beaver ponds improved the self-purification of water in a polluted stream. In the lower part of the studied stream, after the stream passed through the beaver wetland system, the water quality improved, which was indicated by a significant improvement in physicochemical, microbiological, and biotic indicators, that is based on macrozoobenthos and fish. By constructing dams, beavers flooded large areas and created habitats for plant and animal species associated with wetlands, including amphibians, birds, and mammals. The improvement of the ecological status of the stream, combined with the preservation and restoration of wetland habitats in the catchment area, enables the use of ecosystem services provided by the streams in the human-dominated landscape and their surroundings.

Study on the Design, Synthesis, Bioactivity and Translocation of the Conjugates of Phenazine-1-carboxylic Acid and N-Phenyl Alanine Ester.

The natural pesticide phenazine-1-carboxylic acid (PCA) is known to lack phloem mobility, whereas Metalaxyl is a representative phloem systemic fungicide. In order to endow PCA with phloem mobility and also enhance its antifungal activity, thirty-two phenazine-1-carboxylic acid-N-phenylalanine esters conjugates were designed and synthesized by conjugating PCA with the active structure N-acylalanine methyl ester of Metalaxyl. All target compounds were characterized by 1H NMR, 13C NMR and HRMS. The antifungal evaluation results revealed that several target compounds exhibited moderate to potent antifungal activities against Sclerotinia sclerotiorum, Bipolaris sorokiniana, Phytophthora parasitica, Phytophthora citrophthora. In particular, compound F7 displayed excellent antifungal activity against S. sclerotiorum with an EC50 value of 6.57 µg/mL, which was superior to that of Metalaxyl. Phloem mobility study in castor bean system indicated good phloem mobility for the target compounds F1-F16. Particularly, compound F2 exhibited excellent phloem mobility; the content of compound F2 in the phloem sap of castor bean was 19.12 µmol/L, which was six times higher than Metalaxyl (3.56 µmol/L). The phloem mobility tests under different pH culture solutions verified the phloem translocation of compounds related to the "ion trap" effect. The distribution of the compound F2 in tobacco plants further suggested its ambimobility in the phloem, exhibiting directional accumulation towards the apical growth point and the root. These results provide valuable insights for developing phloem mobility fungicides mediated by exogenous compounds.

Study of the spread of medicinal herbs use among patients suffering from chronic diseases in Iraq.

OBJECTIVE: Aim: To assess the prevalence of medicinal plants, use among Iraqi patients with chronic disease and compare it with another study in same or different countries. PATIENTS AND METHODS: Materials and Methods: A randomized Internet and social media questionnaire was used. In this cross-sectional study, peoples with chronic diseases from different age group were recruited. Participants had an internet questionnaire to answer. This questionnaire embraced age, gender, occupation, marital status, education level and some lifestyle details as demographic data, a large proportion of the questionnaire was related to herbs, both prescribed and OTC ones. RESULTS: Results: Gender distribution: about 70% of patients were female and 30% male. Education level: uneducated - 35%, primary school - 30%, secondary school - 25%, academic - 10%. Place of residence: 30% lived in urban and 70% in rural areas. Diseases distribution: 30% hypertension, 20% diabetes, 10% asthma, 10% migraine, 15% hyperlipidemia and 15% rheumatoid arthritis. Medicinal plants: 10% green tea, 5%fish oil, 15% anise 25% castor oil and 15% spirulina. CONCLUSION: Conclusions: The study reported a high prevalence of medicinal herbs use among patients with chronic disease in Iraq. Several factors (rural residence, education, age, multiple chronic conditions and low quality of life) associated with medicinal herbs use. This knowledge will help policy makers and health care providers for decision making on the safe use of herbal medicine.

Dynamics of imprinted genes and their epigenetic mechanisms in castor bean seed with persistent endosperm.

Genomic imprinting refers to parent-of-origin-dependent gene expression and primarily occurs in the endosperm of flowering plants, but its functions and epigenetic mechanisms remain to be elucidated in eudicots. Castor bean, a eudicot with large and persistent endosperm, provides an excellent system for studying the imprinting. Here, we identified 131 imprinted genes in developing endosperms and endosperm at seed germination phase of castor bean, involving into the endosperm development, accumulation of storage compounds and specially seed germination. Our results showed that the transcriptional repression of maternal allele of DNA METHYLTRANSFERASE 1 (MET1) may be required for maternal genome demethylation in the endosperm. DNA methylation analysis showed that only a small fraction of imprinted genes was associated with allele-specific DNA methylation, and most of them were closely associated with constitutively unmethylated regions (UMRs), suggesting a limited role for DNA methylation in controlling genomic imprinting. Instead, histone modifications can be asymmetrically deposited in maternal and paternal genomes in a DNA methylation-independent manner to control expression of most imprinted genes. These results expanded our understanding of the occurrence and biological functions of imprinted genes and showed the evolutionary flexibility of the imprinting machinery and mechanisms in plants.

Outcomes of Castor Single-Branched Stent Graft for Reconstruction of Multiple Supra-Aortic Branches in Aortic Arch Disease.

PURPOSE: To report the outcomes of a combination of Castor single-branched stent grafts with other techniques for the reconstruction of multiple supra-aortic branches in aortic arch disease. MATERIALS AND METHODS: Between December 2019 and December 2021, 20 patients with aortic arch disease underwent thoracic endovascular aortic repair (TEVAR) at our institution using a Castor single-branched stent graft combined with the fenestration, chimney, or bypass techniques. Thoracic endovascular aortic repair is indicated for complicated or acute type B aortic dissection (TBAD), nonruptured aneurysms with a maximum aneurysm diameter >5.5 cm or showing rapidly expanded, ruptured, or threatened aneurysms, and penetrating aortic ulcers (PAUs) with a maximal aortic diameter >5.5 cm or with PAUs >10 mm deep or >20 mm in diameter. Preoperative, intraoperative, and postoperative clinical data were recorded. RESULTS: The median age of the patients was 56 (range=52-69 years) years, and 19 patients were men. Seven patients underwent the Castor single-branched stent graft and left common carotid artery (LCCA) chimney technique, 8 patients underwent the Castor single-branched stent graft and fenestration technique, and 5 patients underwent the Castor single-branched stent graft and bypass technique. The technical success rate was 100%. Major adverse events included 2 endoleaks, 1 spinal cord ischemia, and 1 early-stage retrograde type A aortic dissection. No cerebral stroke-related complications were observed. The mortality rate was 10% (2/20 patients). One patient with thoracic aortic aneurysm (TAA) died because of a sudden decrease in oxygen saturation and blood pressure after surgery. Relatives declined autopsy, and the cause of death was not determined. Another patient died of a retrograde type A dissection after surgery. The median follow-up period was 6 months (range=3.5-12 months). During follow-up, 1 patient with type I endoleak underwent thoracotomy again after a year. The remaining patients recovered well. CONCLUSIONS: The combination of a Castor single-branched stent graft with fenestration, chimney, or bypass techniques may be an effective treatment for preserving multiple supra-aortic branches in aortic arch disease. CLINICAL IMPACT: This study introduced three methods of reconstruction of multiple supra-aortic branches using a Castor single-branched stent graft (Castor single-branched stent graft combined with fenestration, chimney, or bypass technique) and analysed their advantages and shortcomings to provide experience for the future treatment of aortic arch diseases.

Eurasian beavers in Central Italy: perceptions in the local community.

According to the IUCN guidelines, wildlife reintroduction should consider any impacts on humans within feasibility assessments. Eurasian beavers Castor fiber are recovering across their native range, due to protection laws and reintroductions. In Central Italy, a self-sustaining, naturalised population of Eurasian beavers has been identified in the last five years. A questionnaire to measure whether and how citizens in the local area perceive the presence of the beaver was administered to 1114 respondents. We observed a comprehensive awareness of the presence of the beaver in Italy and a high ability to distinguish it from non-native coypus Myocastor coypus (92.3%). We also recorded a general high knowledge of issues related to the presence of the beaver (i.e., potential effects on indigenous biodiversity). The majority (65.5%) of the surveyed population was in favour of reintroducing the beaver in Central Italy, and only 1.2% was firmly against it. The majority of interviewed people was against the removal of beavers from Central Italy (65.8%), whereas only 3.7% was in favor, citing fears of perceived impacts on the river, crops, and fish populations.

Molecular genetics, seed morphology and fatty acids diversity in castor (Ricinus communis L., Euphorbiaceae) Iranian populations.

BACKGROUND: Castor (Ricinus communis L.) seeds contain a large amount of oil that has several biological activities. In the current research, phytogeographic distribution, seed morphological characteristics, molecular genetic diversity and structure, and fatty acid composition were investigated in nine Iranian castor populations. METHODS AND RESULTS: The cetyltrimethylammonium bromide (CTAB) protocol was used to extract the nuclear genomes. These were later amplified using 13 SCoT molecular primers. The phytogeographic distribution was determined based on the Zohary mapping, GC apparatus determined the fatty acid composition of the seeds. GenAlex, STRUCTURE, GenoDive, PopGene, and PopART software were used for the statistical analyzes. On phytogeographic mapping, the harvested populations belonged to different districts of the Euro-Siberian and Irano-Turanian regions (Holarctic kingdom). Most of the quantitative morphological traits of the seeds differed significantly (P ≤ 0.05) between the populations. The AMOVA test demonstrated a large proportion of significant genetic diversity assigned among populations, which were approved by some estimated parameters of genetic diversity such as Nm, Ht, Hs, and Gst. Nei's genetic distance and structure analysis confirmed the existence of two main genotype groups and some intermediates. However, there was no isolation by distance between the genotypes. Unsaturated fatty acids were detected as the main component of seed oil with linoleic and ricinoleic acids. Significant correlations were detected between the main fatty acids of seed oil with seed morphological traits, geographic distance and the geographic parameters of habitats. According to the composition of the seed fatty acids, four chemotypes groups were detected. CONCLUSIONS: The classification patterns of the populations based on molecular genetic data, fatty acid composition, and phytogeographic mapping were not identical. These findings indicated that Iranian castor populations had unusual seed fatty acid composition which strongly depended on habitat geographic factors and seed morphological traits. However, the identified chemotypes and genotypes can be used in future breeding programs.

Endovascular repair of aortic pathologies involving the aortic arch using castor stent-graft combined with in-vitro fenestration technology.

BACKGROUND: Aortic arch pathologies are concerning clinical conditions with poor prognoses. The use of thoracic endovascular aortic repair (TEVAR) has been investigated to treat aortic arch pathologies. Nonetheless, cerebral blood flow regulation during endovascular aortic arch repair therapy remains challenging. Castor, a unique single-branched stent graft, has been proven effective for retaining the left subclavian artery (LSA). This study aimed to determine whether endovascular therapy for pathologies involving the aortic arch using Castor in combination with the in-vitro fenestration technique is promising, effective, and safe. METHODS: Eligible patients were enrolled between June 2018 and December 2021. All patients underwent TEVAR with an evaluated proximal landing zone for "Castor" located in Ishimaru zones 0-1. Moreover, the supra-aortic branches (SABs) were reconstructed using the Castor in combination with the in-vitro fenestration technique. RESULTS: Herein, 57 patients with aortic arch lesions were treated with Castor in combination with the in-vitro fenestration technique. Innominate artery and the left carotid artery (LCA) were reconstructed in 5 patients, LCA and left subclavian artery (LSA) were reconstructed in 22 patients, and the total SABs were effectively reconstructed in 30 patients (including a hybrid arch repair case). Among them (excluding a hybrid arch repair case) were in-vitro fenestration methodologies for LCA in 32 of 34 cases (2 switched to in-situ fenestration) and LSA in 51 of 56 cases (3 switched to in-situ fenestration and 2 converted to spring coil caulking); furthermore, LCA and LSA in-vitro fenestration were simultaneously successfully performed in 27 of 34 cases. There were no surgical-related neurological complications, and early mortality was estimated at 5.26%. At a mean follow-up of 3.75 months, computed tomography (CTA) images confirmed that each branch stent remained patent. There were no signs of endoleaks, migrative manifestations, or the need for secondary endovascular intervention or conversion to open surgical procedures. CONCLUSION: Castor, in combination with in-vitro fenestration, reflects a feasible, efficient procedure for re-developing SABs.

Efficacy of the Castor Oil-Filled Capsule Method as Preparation for Colon Capsule Endoscopy.

BACKGROUND: Colon capsule endoscopy (CCE) is useful as an alternative examination for patients in whom colonoscopy is difficult. The Japanese Association for Capsule Endoscopy has published a recommended regimen for CCE using castor oil, which is becoming a standard examination method for CCE in Japan. However, castor oil has an unpleasant flavor. Therefore, patient acceptance is not good. OBJECTIVES: The aims were to develop a castor oil-filled capsule and evaluate its feasibility and patient acceptance in a retrospective, comparative study. METHOD: A dissolution study of pig-derived gelatin capsules filled with castor oil was performed using artificial gastric juice. The CCE excretion rates within battery lifetime, CCE examination times, endoscopic colonic cleansing levels, and patient acceptability between CCE boosters with a castor oil-filled capsule and without castor oil were retrospectively compared using medical information, clinical data, and endoscopic findings at Takada Chuo Hospital from September 2016 to August 2019. RESULTS: The castor oil-filled capsules were completely disintegrated at approximately 1-3 min in artificial gastric juice. Bowel preparation with oil-filled capsules and without castor oil was performed in 27 and 24 patients, respectively. CCE excretion rates within battery life were 100% and 91.7% (p = 0.217), small bowel transit times were 115 min and 143 min (p = 0.046), colon transit times were 168 min and 148 min (p = 0.733), and adequate colonic cleansing rates were 85.2% and 86.3% (p = 1.000) in patients using bowel preparation with and without oil-filled capsules, respectively. Regarding acceptance, the taste was not problematic in 85.2%, and tolerability for the next CCE was 96.3%. CONCLUSIONS: CCE using a castor oil-filled capsule method achieved high examination performance and sufficient patient tolerability.