Biomechanical assessment of gastrocnemii and Achilles tendon using MyotonPRO: in vivo measurements, and preliminary in situ measurements using formalin-fixed tissues.

PURPOSE: This study aims to evaluate the reliability and validity of using MyotonPRO to quantify the mechanical properties of the muscle-tendon unit through in vivo measurements and preliminary in situ measurements using formalin-fixed tissues. MATERIALS AND METHODS: The mechanical properties of gastrocnemii and the Achilles tendon of 12 healthy adults (six males and six females, 34.9 ± 5.8 years) were examined for in vivo test twice within a day and once post-24 hours using MyotonPRO, while nine human cadavers (formalin-fixed, 3 males and 6 females, 89.9 ± 5.1 years) were assessed for preliminary in situ test with identical time schedule to evaluate the within-day and inter-day reliability and validity. RESULTS: In vivo tests had very high within-day (ICC: 0.96-0.99) and inter-day reliability (ICC: 0.83-0.96), while in situ tests (formalin-fixed tissues) showed high within-day (ICC: 0.87-0.99) and inter-day reliability (ICC: 0.76-0.98) for the results of tone and stiffness. There was no significant difference in the stiffness of the free part of the Achilles tendon between in vivo and in situ conditions. The stiffness of the lateral gastrocnemius (r = 0.55, p = 0.018), proximal part of the Achilles tendon (r = 0.56, p = 0.015), and free part of the Achilles tendon (r = 0.47, p = 0.048) before removing the skin was significantly correlated with that after removing the skin condition. CONCLUSIONS: The findings of the current study suggest that MyotonPRO is reliable and valid for evaluating tendon stiffness both in vivo and in situ (formalin-fixed tissues).

Ultrasound guided quadro-iliac plane block: another novel fascial plane block.

STUDY OBJECTIVE: We report a novel block technique aimed to provide lumbosacral, abdominal, and hip analgesia: The quadro-iliac plane (QIP) block. DESIGN: A cadaveric examination that evaluates the spread of QIP block. SETTING: Cadaver laboratory. PATIENTS: One unembalmed cadaver. INTERVENTIONS: Bilateral ultrasound-guided QIP blocks on cadavers with 40 mL of methylene blue %0.5 each side. MEASUREMENTS: Dye spread in cadaver. MAIN RESULTS: There was staining in the deep interfascial plane of the erector spinae muscles. Extensive staining of the interfascial plane corresponding to the posterior aspect of the quadratus lumborum muscle (QLM) was observed. There was extensive staining on the anterior surface of the QLM. There was spread of dye traversing along the transversalis fascia and significantly infiltrating retroperitoneal fat tissue. Bilateral staining of the ilioinguinal and iliohypogastric nerves was observed. On the right, there was minimal staining over the subcostal nerve. There was dye present bilaterally within the deep regions of the transverse processes. The lumbar plexus was stained on both sides. CONCLUSION: The local anesthetic applied from a place where the QLM reaches its largest volume and the fascial plane creates a closed gap in the caudal area may exhibit a more rounded and extensive spread.Quadro-iliac plane block, involves the administration of local anesthetic to the posterior aspect of the QLM at its origin from the iliac crest. According to our cadaver study, this technique may be a promising option for alleviating acute and chronic pain in the lumbosacral, lower abdominal, and hip regions.

Simulated subacromial injection instruction improves accuracy and skill level: a model for musculoskeletal procedural training.

BACKGROUND: Musculoskeletal (MSK) complaints often present initially to primary care physicians; however, physicians may lack appropriate instruction in MSK procedures. Diagnostic and therapeutic injections are useful orthopedic tools, but inaccuracy leads to unnecessary costs and inadequate treatment. The authors hypothesized that trainees afforded the opportunity to practice on a cadaver versus those receiving visual-aided instruction on subacromial injections (SAI) will demonstrate differences in accuracy and technique. METHODS: During Spring of the year 2022, 24 Internal Medicine and Family Medicine residents were randomly divided into control and intervention groups to participate in this interventional randomized cadaveric study. Each group received SAI instruction via lecture and video; the intervention group practiced on cadavers under mentored guidance. Subjects underwent a simulated patient encounter culminating in injection of latex dye into a cadaveric shoulder. Participants were evaluated based on a technique rubric, and accuracy of injections was assessed via cadaver dissection. RESULTS: Twenty-three of twenty-four participants had performed at least one MSK injection in practice, while only 2 (8.3%) of participants had performed more than 10 SAIs. There was no difference in technique between control 18.4 ± 3.65 and intervention 19.2 ± 2.33 (p = 0.54). Dissections revealed 3 (25.0%) of control versus 8 (66.7%) of intervention injections were within the subacromial space. Chi-Square Analysis revealed that the intervention affected the number of injections that were within the subacromial space, in the tissues bordering the subacromial space, and completely outside the subacromial space and bordering tissues (p = 0.03). The intervention group had higher self-confidence in their injection as opposed to controls (p = 0.04). Previous SAI experience did not affect accuracy (p = 0.76). CONCLUSIONS: Although primary care physicians and surgeons develop experience with MSK procedures in practice, this study demonstrates a role for early integrated instruction and simulation to improve accuracy and confidence. The goal of improving accuracy in MSK procedures amongst all primary care physicians may decrease costs and avoid unnecessary referrals, diagnostic tests, and earlier than desired surgical intervention.

Surgical approaches to the capitellum: a comparative anatomic study.

BACKGROUND: Osteochondritis dissecans (OCD) of the humeral capitellum is an important cause of elbow disability in young athletes. Large and unstable lesions sometimes require joint reconstruction with osteochondral autograft. Several approaches have been described to expose the capitellum for the purpose of treating OCD. The posterior anconeus-splitting approach and the lateral approach with or without release of the lateral ligamentous complex are the most frequently used for this indication. The surface accessible by these approaches has not been widely studied. This study compared the extent of the articular surface of the capitellum that could be exposed with the Kocher approach (without ligament release) vs. the posterior anconeus-splitting approach. A secondary outcome was the measurement of any additional area that could be reached with lateral ulnar collateral ligament release (Wrightington approach). METHODS: The 3 approaches were performed on 8 adult cadaveric elbows: first, the Kocher approach; then, the anconeus-splitting approach; and finally, the Wrightington approach. The visible articular surface was marked out after completion of each approach. RESULTS: The mean articular surface of the capitellum was 708 mm2 (range, 573-830 mm2). The mean visible articular surface was 49% (range, 43%-60%) of the total surface with the Kocher approach, 74% (range, 61%-90%) with the posterior anconeus-splitting approach, and 93% (range, 91%-97%) with the Wrightington approach. Although the Kocher approach provided access to the anterior part of the capitellum, the anconeus-splitting approach showed adequate exposure to the posterior three-quarters of the articular surface and overlapped the most posterior part of the Kocher approach. A combination of the 2 lateral ulnar collateral ligament-preserving approaches allowed access to 100% of the joint surface. CONCLUSION: Most OCD lesions are located in the posterior area of the capitellum and can therefore be reached with the anconeus-splitting approach. When OCD lesions are located anteriorly, the Kocher approach without ligament release is efficient. A combination of these 2 approaches enabled the entirety of the joint surface to be viewed.

Biomechanical comparison of open Bankart repair vs. conjoint tendon transfer in a 10% anterior glenoid bone loss shoulder instability model.

BACKGROUND: The treatment of shoulder instability in patients with subcritical glenoid bone loss poses a difficult problem for surgeons as new evidence supports a higher failure rate when a standard arthroscopic Bankart repair is used. The purpose of this study was to compare a conjoint tendon transfer (soft-tissue Bristow) to an open Bankart repair in a cadaveric instability model of 10% glenoid bone loss. METHODS: Eight cadaveric shoulders were tested using a custom testing system that allows for a 6-degree-of-freedom positioning of the glenohumeral joint. The rotator cuff muscles were loaded to simulate physiologic muscle conditions. Four conditions were tested: (1) intact, (2) Bankart lesion with 10% bone loss, (3) conjoint tendon transfer, and (4) open Bankart repair. Range of motion, glenohumeral kinematics, and anterior-inferior translation at 60° of external rotation with 20 N, 30 N, and 40 N were measured in the scapular and coronal planes. Glenohumeral joint translational stiffness was calculated as the linear fit of the translational force-displacement curve. Force to anterior-inferior dislocation was also measured in the coronal plane. Repeated measures analysis of variance with a Bonferroni correction was used for statistical analysis. RESULTS: A Bankart lesion with 10% bone loss increased the range of motion in both the scapular (P = .001) and coronal planes (P = .001). The conjoint tendon transfer had a minimal effect on the range of motion (vs. intact P = .019, .002), but the Bankart repair decreased the range of motion to intact (P = .9, .4). There was a significant decrease in glenohumeral joint translational stiffness for the Bankart lesion compared with intact in the coronal plane (P = .021). The conjoint tendon transfer significantly increased stiffness in the scapular plane (P = .034), and the Bankart repair increased stiffness in the coronal plane (P = .037) compared with the Bankart lesion. The conjoint tendon transfer shifted the humeral head posteriorly at 60° and 90° of external rotation in the scapular plane. The Bankart repair shifted the head posteriorly in maximum external rotation in the coronal plane. There was no significant difference in force to dislocation between the Bankart repair (75.8 ± 6.6 N) and the conjoint tendon transfer (66.5 ± 4.4 N) (P = .151). CONCLUSION: In the setting of subcritical bone loss, both the open Bankart repair and conjoint tendon transfer are biomechanically viable options for the treatment of anterior shoulder instability; further studies are needed to extrapolate these data to the clinical setting.

Optimising safe margins in shoulder surgeries: a cadaveric study on brachial plexus nerves with anthropometric and movement correlation.

PURPOSE: Shoulder surgeries, vital for diverse pathologies, pose a risk of iatrogenic nerve damage. Existing literature lacks diverse bone landmark-specific nerve position data. The purpose of this study is to address this gap by investigating such relationships. METHOD: This cadaveric study examines axillary, radial and suprascapular nerves' relation with acromion, coracoid and greater tuberosity of the humerus (GT). It also correlates this data with humeral lengths and explores nerve dynamics in relation to arm positions. RESULTS: The mean distance from the axillary nerve to (i) GT was 4.38 cm (range 3.32-5.44, SD 0.53), (ii) acromion was 6.42 cm (range 5.03-7.8, SD 0.694) and (iii) coracoid process was 4.3 cm (range 2.76-5.84, SD 0.769). Abduction brought the nerve closer by 0.36 cm, 0.35 cm and 0.53 cm, respectively. The mean distance from radial nerve to (i) GT was 5.46 cm (range 3.78-7.14, SD 0.839), (ii) acromion was 7.82 cm (range 5.4-10.24, SD 1.21) and (iii) tip of the coracoid process was 6.09 cm (range 4.07-8.11 cm, SD 1.01). The mean distance from the suprascapular nerve to the acromion was 4.2 cm (range 3.1-5.4, SD 0.575). The mean humeral length was noted to be 27.83 cm (range 25.3-30.7, SD 1.13). There was no significant correlation between these distances and humeral lengths. CONCLUSION: It is essential to exercise caution to avoid axillary nerve damage during the abduction manoeuvre, as its distance from the greater tuberosity and tip of the coracoid process has shown a significant reduction. The safe margins, in relation to the length of the humerus and consequently the patient's stature, exhibit no significant variation. In situations where the greater tuberosity (GT) and the border of the acromion are inaccessible due to reasons such as trauma, the tip of the coracoid process can serve as a dependable bone landmark for establishing a secure surgical margin.

The distance between the fibular collateral ligament tunnel and the common peroneal nerve allows a posterolateral corner reconstruction without neurolysis.

PURPOSE: The most popular knee posterolateral corner (PLC) reconstruction techniques describe that a common peroneal nerve (CPN) neurolysis must be done to safely address the posterolateral aspect of the knee. The purpose of this study was to measure the distance between the CPN and the fibular insertion of the FCL in different degrees of knee flexion in cadaveric specimens, to identify if tunnel drilling could be done anatomically and safely without a CPN neurolysis. METHODS: Ex vivo experimental analytical study. Ten fresh frozen human knees were dissected leaving FCL and CPN in situ. Shortest distance from the centre of the FCL distal tunnel and CPN was measured (antero-posterior and proximal-distal wire-nerve distances) at 90°, 60°, 30°, and 0° of knee flexion. Measurements between different flexion angles were compared and correlation between knee flexion angle and distance was identified. RESULTS: The mean distance between the FCL tunnel and the CPN at 90° were 21.15 ± 6.74 mm posteriorly (95% CI: 16.33-25.97) and 13.01 ± 3.55 mm distally (95% CI: 10.47-15.55). The minimum values were 9.8 mm posteriorly and 8.9 mm, respectively. These distances were smaller at 0° (p ≤ 0.017). At 90° of knee flexion, the mean distance from the fibular tip to the CPN distally was 23.46 ± 4.13 mm (20.51-26.41). CONCLUSION: Anatomic localization and orientation of fibular tunnels can be done safely while avoiding nerve neurolysis. Further studies should aim to in vivo measurements and results.

Ultrasound-guided and 'blind' sciatic nerve injection techniques: Comparison in rat cadavers.

OBJECTIVE: To compare the success rate and extent of sciatic nerve staining with a bupivacaine-dye solution using two injection techniques: 'blind' or ultrasound-guided approach. STUDY DESIGN: Prospective, experimental, randomized, cadaveric study. ANIMALS: Adult female Wistar rat cadavers [n = 24, mass 352 g (323-374)]. METHODS: Each sciatic nerve was randomly allocated to one of two groups: 'blind' (group B) or ultrasound-guided approach (group US) to injection. Following injection of bupivacaine-dye solution (0.1 mL), gross anatomical dissection was performed to visualize nerve staining, categorizing it as either positive or negative. The length of nerve staining was then measured and visual inspection conducted to identify potential nerve damage. Fisher's exact test was used to compare positive or negative nerve staining, and the Wilcoxon signed rank test used to compare the length of nerve staining between groups. RESULTS: In group B, the bupivacaine-dye solution stained 16/24 sciatic nerves (67% success). In group US, staining was successfully observed in all 24 nerves (100% success, p < 0.004). The length of nerve staining [median (interquartile range)] was 2 (2-3) mm in group B and 5 (4-6) mm in group US (p < 0.001). One sciatic nerve in group B had injectate distributed over 16 mm, suggestive of an intraneural injection. No signs of laceration or nerve damage were visible under 6× magnification in either group. CONCLUSIONS AND CLINICAL RELEVANCE: The ultrasound-guided approach for sciatic nerve injection demonstrated a higher success rate with superior injectate distribution when compared with the 'blind' approach. Ultrasound guidance is recommended over a 'blind' approach for sciatic nerve block in rats when possible.

Analyzing the reduction quality of the distal radioulnar joint after closed K-wire transfixation in a cadaver model: is supination or neutral position superior?

INTRODUCTION: Distal radioulnar joint (DRUJ) instabilities are challenging and their optimal treatment is controversial. In special cases or when reconstruction of the stabilizing triangular fibrocartilage complex (TFCC) fails, K-wire transfixation can be performed. However, no consensus has been reached regarding the rotational position of the forearm in which this should be done. Therefore, it was investigated whether anatomical reduction would best be achieved by transfixation in neutral position or supination of the forearm. MATERIALS AND METHODS: Twelve cadaveric upper limbs were examined before dissection of the DRUJ stabilizing ligaments and after closed transfixation in both positions by C-arm cone-beam CT. Whether this was first done in neutral position or in supination was randomized. The change in the radioulnar ratio (RR) in percentage points (%points) was analyzed using Student's t-test. RR was used since it is a common and sensitive method to evaluate DRUJ reduction, expressing the ulnar head's position in the sigmoid notch as a length ratio. RESULTS: The analysis showed an increased change in RR in neutral position with 5.4 ± 9.7%points compared to fixation in supination with 0.2 ± 16.1%points, yet this was not statistically significant (p = 0.404). CONCLUSIONS: Neither position leads to a superior reduction in general. However, the result was slightly closer to the anatomical position in supination. Thus, transfixation of the DRUJ should be performed in the position in which reduction could best be achieved and based on these data, that tends to be in supination. Further studies are necessary to validate these findings and to identify influential factors.

Combined vertical and external rotational force in plantarflexion position produces posterior pilon fracture: A preliminary cadaveric study.

BACKGROUND: Posterior pilon fracture is speculated to occur by a combination of rotation and axial load, which makes it different from rotational posterior malleolar fracture or pilon fracture, but is not validated in vitro. The aim of the current study is to investigate the injury mechanisms of posterior pilon fracture on cadaveric specimens. METHODS: Eighteen cadaveric specimens were mounted to a loading device to undergo solitary vertical loading, solitary external rotational loading, and combined vertical and external rotational loading until failure, in initial position of plantarflexion with or without varus. The fracture characteristics were documented for each specimen. RESULTS: Vertical loading force combined with external rotation force diversified the fracture types resulting in pilon fracture, tibial spiral fracture, rotational malleolar fracture, talar fracture or calcaneal fracture. Vertical violence combined with external rotational loading in position of 45° of plantarflexion and 0° of varus produced posterior pilon fracture in specimens No. 13 and 14. CONCLUSION: Combination of vertical and external rotational force in plantarflexion position on cadaveric specimens produce posterior pilon fracture.

Accuracy of radiographic projections to guide cephalic screw position in pertrochanteric fracture: a cadaveric study.

PURPOSE: The aim of this study was to evaluate the relationship between the Löwenstein Lateral view and the True Lateral view for the positioning of the cephalic hip screw, through a cadaveric study. MATERIALS AND METHODS: We placed two Kirschner wires in eight femur specimens using an Antero-Posterior view, Löwenstein Lateral view and True Lateral view. The distances between the Kirschner wires and the anterior, posterior, superior and inferior cortex were measured in all projections. The head of the femur was then sectioned, and the same macroscopic distances were measured. Finally, we could calculate the accuracy of the two radiographic lateral projections. RESULTS: When the Kirschner wire was placed in the center of the head using the Antero-Posterior and the True Lateral view, the accuracy of Antero-Posterior view was 0.9705 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1479 and 1.1584, respectively. When the Kirschner wire was placed superior on the Antero-Posterior and centrally on the True Lateral view, the accuracy of Antero-Posterior view was 0.9930 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1159 and 0.7224, respectively. CONCLUSION: When the Kirschner wire was positioned proximal in Antero-Posterior view and central in True Lateral view, only the True Lateral view showed high accuracy.

Minimally invasive plate osteosynthesis (MIPO) for distal humeral fractures: a cadaveric study and first clinical application.

BACKGROUND: The indication for minimally invasive plate osteosynthesis (MIPO) may include articular fractures depending on the fracture pattern. The goal of this study was to evaluate the feasibility of the MIPO technique for extra- and intra-articular distal humeral fractures. METHODS: The feasibility of the MIPO technique was assessed on 8 cadaveric elbows and 2 clinical cases. The four surgical approaches tested included a 20-mm ulnar incision, a 20-mm dorsoradial incision, and two incisions for olecranon osteotomy (A and B). Surgical incision A was 40 mm on the osteotomy level of the olecranon, and surgical incision B was an extension of the radial incision toward the osteotomy of the olecranon (80 mm). The four approaches were tested on 4 extra-articular (AO 13 A3) fractures and 4 intra-articular (AO 13 C3) fractures. RESULTS: Reduction and plate fixation of all distal humeral fractures (8 cadaveric) with and without osteotomy was feasible. However, when using approach B, the soft tissue tension is reduced due to the wider incision. Nevertheless, both approaches A and B showed the same adequate intra-articular fracture control and reduction. CONCLUSION: The MIPO technique for reduction and plate fixation in distal humeral fractures is feasible. LEVEL OF EVIDENCE: As a feasibility study, this study cannot be clearly classified into a level of evidence. It corresponds most closely to level IV.

Anatomic Relationship of Hand Intrinsic Tendons at the Metacarpal Head as It Relates to the Diagnosis of Saddle Syndrome: A Cadaveric Study.

PURPOSE: The purpose of this cadaveric study was to investigate the intrinsic anatomy surrounding the metacarpal head and the relationship between the interosseous-lumbrical junction (ILJ) and transverse metacarpal ligament (TML) as it pertains to saddle deformity-posttraumatic adhesions at the ILJ that cause impingement during intrinsic activation. METHODS: Ten fresh frozen cadaveric arms underwent dissections, identifying the intrinsic musculature within the second through fourth webspaces. The TML and ILJ, or "true tendon," were identified. A separate area of nontendinous fibrous tissue identified proximal to the ILJ was referred to as "pseudotendon." Measurements were made within each webspace to identify distances between these structures in full finger extension and intrinsic plus position to assess for changes during simulated motion. RESULTS: The true tendon to TML distance progressively decreased toward the ulnar digits. In the intrinsic plus position, the pseudotendon to TML distance was 0 mm at all webspaces for each specimen. When moving from neutral to intrinsic plus, the true tendon to TML distance decreased the most in the third and fourth webspaces compared with the second, consistent with the trend toward a smaller ILJ to TML gap in the ulnar digits. CONCLUSIONS: There is a fibrous pseudotendinous region proximal to the ILJ that abuts the TML in the intrinsic plus position, which may cause impingement when inflamed in the setting of saddle syndrome. Furthermore, a decreased ILJ to TML gap in the ulnar digits may be related to an increased predilection for saddle deformity in those areas. CLINICAL RELEVANCE: These results suggest that there is a fibrous region present proximal to the ILJ that may be implicated in the pathology of saddle deformity. Furthermore, decreased distances found between the ILJ and TML in vivo may be an explanation for increased occurrence of saddle syndrome in the third and fourth webspaces in clinical practice.

Biomechanical consequences of glenoid and humeral lateralization in reverse total shoulder arthroplasty.

BACKGROUND: The objective of our study was to quantify the biomechanical effectiveness of lateralization in RTSA with respect to glenoid and humeral component configurations. METHODS: Eight cadaveric shoulders were tested in a custom shoulder testing system. Three parameters, including the glenosphere thickness, humeral tray offset, and insert thickness, were assessed by implanting 8 configurations on each specimen. Humeral position, maximum internal rotation, and maximum external rotation (ER) before impingement were quantified at 0° and 30° glenohumeral abduction. The adduction angle at which the humeral component contacted the inferior scapular neck and the abduction angle where acromial notching occurred were also measured. The simulated active range of motion, including ER and abduction capability, was tested by increasing the load applied to the remaining posterior cuff and middle deltoid, respectively. Stability was evaluated by the forces that induced anterior dislocation at 30° abduction. RESULTS: The thicker glenosphere affected only lateralization, whereas the centric humeral tray and thicker insert significantly affected humeral lateralization and distalization simultaneously. Greater adduction and ER angles were found in more lateralized humerus. A significant positive correlation between humeral lateralization and ER capability was observed; however, lateralization did not significantly improve implant stability in this cadaveric testing system. CONCLUSION: Lateralization is achievable at both the glenoid and humeral sides but has different effects; therefore, lateralized implant options should be selected according to patients' needs. Lateralization is an effective strategy for reducing adduction notching while increasing ER capability. Thicker glenospheres only affected humeral lateralization. The centric humeral tray would be selected for less distalization to avoid overlengthening, whereas an eccentric humeral tray is the most effective for distalization and medialization in reducing abduction notching to the acromion and for patients with pseudoparalysis.

Does the L4 nerve root extend during femoral nerve stretch test? A cadaveric study of four cases analyzing the extension rates of the lumbar nerve root.

BACKGROUND: Lumbar radicular pain is a common symptom of lumbar disc herniation and spinal canal stenosis, and L4 nerve root impingement is difficult to diagnose. This study aimed to elucidate the extension rate of L4 nerve roots in Thiel-embalmed specimens using both classic and new femoral nerve stretch test (FNST), as well as straight leg raising test (SLRT). Additionally, the extension rate of the L2 and L3 nerve roots and L5 and S1 roots were determined using FNST (both classic and new) and SLRT, respectively. METHODS: Four Thiel-embalmed specimens were used. The extension rate data of the nerve root were obtained using a displacement sensor under the following conditions: knee joint flexed to 0°/45°/90°/135° with either the hip extension/flexion of 0° (classic FNST) or extension of 15° (new FNST); and hip joint flexed to 0°/30°/60°/90° with the knee flexion of 0° (SLRT). RESULTS: Case A had almost no L4 nerve root lengthening at 45° and 90° knee joint flexion; however, at 135° of knee flexion, the nerve root was lengthened. In Case B, the L4 nerve root was hardly extended by the classic FNST, but it was extended at 135° of knee flexion and 15° of hip extension. In Case C, the L4 nerve root showed little change by classic FNST and it was shortened by new FNST, whereas, it was extended by SLRT. Case D showed a shortened L4 nerve root at 135° of knee flexion in classic FNST and at 0°/45°/90°/135° of knee flexion and 15° of hip extension. Further, no root shortening was observed for L2 and L3 nerve roots according to both classic and new FNST. In contrast, the extension of L2 and L3 nerve root with the new FNST was high. In all cases, nerve roots were lengthened by the SLRT. Further, as the hip flexion angle increased, the rate of nerve elongation also increased. CONCLUSIONS: It was shown that in patients in whom L4 nerve root was extended by FNST, it was shortened by SLRT. The opposite pattern was also observed. Further, it is believed that FNST and SLRT are reliable tests for L2 and L3 radiculopathy and L5 and S1 radiculopathy, respectively, and that more tension on the femoral and sciatic nerves is better. Furthermore, we recommend that FNST should be performed with 15° hip extension and 135° knee flexion to improve the diagnostic accuracy.

Identification of the joint line in revision total knee arthroplasty using a multiple linear regression model: a cadaveric study.

INTRODUCTION: The results of revision total knee arthroplasty (rTKA) may be compromised by excessive joint line (JL) elevation. It is critical but challenging in reestablishing the JL in rTKA. Previous studies have confirmed that, biomechanically and clinically, JL elevation should not exceed 4 mm. Image-based studies described several approaches to locate the JL intraoperatively, however magnification errors could occur. In this cadaveric study, we aim to define an accurate and reliable method to determine the JL. MATERIALS AND METHODS: Thirteen male and eleven female cadavers were used, with an average age of death being 48.3 years. The transepicondylar width (TEW), the distance from the medial (MEJL) and lateral (LEJL) epicondyle, adductor tubercle (ATJL), fibular head (FHJL) and tibial tubercle (TTJL) to the JL were measured in 48 knees. Intra- and interobserver reliability and validity were tested prior to any additional analysis. Pearson correlation and linear regression analysis were used to examine the correlations between landmark-JL distances (LEJL, MEJL, ATJL, FHJL and TTJL) and the TEW, and to further derive models for intraoperative JL determination. The accuracy of different models, quantified by errors between estimated and measured landmark-JL distances, was compared using the Friedman and post hoc Dunn tests. RESULTS: The intra- and inter-observer measurements for TEW, MEJL, LEJL, ATJL, TTJL and FHJL did not differ significantly (p > 0.05). Between genders, significant differences were found on TEW, MEJL, LEJL, ATJL, FHJL and TTJL (p < 0.05). There was no association between TEW and either FHJL or TTJL (p > 0.05), while ATJL, MEJL, and LEJL were found to be correlated with TEW (p < 0.05). Six models were derived: (1) MEJL = 0.37*TEW (r = 0.384), (2) LEJL = 0.28*TEW (r = 0.380), (3) ATJL = 0.47*TEW (r = 0.608), (4) MEJL = 0.413*TEW - 4.197 (R2 = 0.473), (5) LEJL = 0.236*TEW + 3.373 (R2 = 0.326), (6) ATJL = 0.455*TEW + 1.440 (R2 = 0.556). Errors were defined as deviations between estimated and actual landmark-JL distances. The mean absolute value of the errors, created by Model 1-6 was 3.18 ± 2.25, 2.53 ± 2.15, 2.64 ± 2.2, 1.85 ± 1.61, 1.60 ± 1.59 and 1.71 ± 1.5, respectively. The error could be limited to 4 mm in 72.9%, 83.3%, 72.9%, 87.5%, 87.5%, and 93.8% of the cases by referencing Model 1-6, respectively. CONCLUSION: Compared to previous image-based measurements, the current cadaveric study most closely resembles a realistic view of intraoperative settings and could circumvents magnification errors. We recommend using Model 6, the JL can be best estimated by referencing the AT and the ATJL can be calculated as ATJL (mm) = 0.455*TEW (mm) + 1.440 (mm).

Correction of the pelvic incidence using a bilateral extending pelvic osteotomy: a proof of concept study.

INTRODUCTION: The aim of this proof of concept human cadaver study was to quantify the effect of a bilateral extending pelvic osteotomy (BEPO) on pelvic incidence (PI) as a potential alternative for a pedicle subtraction osteotomy (PSO) in patients with severe spinal sagittal malalignment. MATERIALS AND METHODS: 10 fresh frozen human cadavers were treated with the BEPO technique. CT images were made before and after the osteotomy and pure sagittal images were created on which PI was measured. RESULTS: The mean pre-osteotomy PI was 47.9° (range 36.4-63.9) and the mean post-osteotomy PI was 36.5° (range 22.1-54.4). The mean correction was - 10.4° with a range of - 8.4° to - 17.3° (p = 0.03), which resulted in a mean decrease of 23% in the PI (range 16-42). CONCLUSIONS: There was a feasible and effective correction of PI using the BEPO technique on the os ilium. This was a preliminary cadaveric study. No conclusions could be made on global sagittal alignment. We postulate that an extending osteotomy of the ilium could be a potential alternative for a PSO reducing the complexity of spine surgery in patients with severe spinal sagittal malalignment.

Variation of the brachial artery emerging through an opening in the median nerve: a case report.

The median nerve maintains a close relationship with the brachial artery in the upper limb. Variability in the formation and distribution of upper extremity vessels is frequently encountered during donor body dissections or surgical procedures. This case presents a rare anatomical variation of the brachial artery emerging through an opening in the median nerve. The median nerve formed a small opening without the contribution from additional nerve roots and the remaining vasculature of the upper limb was otherwise normal. An abnormal arrangement of a neurovascular bundle in the arm can cause sensory and motor issues, as well as vascular implications. This variation has clinical significance in surgical interventions and potentially daily functioning. To our knowledge, this is the first report of a small median nerve opening pierced by the brachial artery.

A novel anatomo-physiologic high-grade spondylolisthesis model to evaluate L5 nerve stretch injury after spondylolisthesis reduction.

L5 nerve palsy is a well-known complication following reduction of high-grade spondylolisthesis. While several mechanisms for its occurrence have been proposed, the hypothesis of L5 nerve root strain or displacement secondary to mechanical reduction remains poorly studied. The aim of this cadaveric study is to determine changes in morphologic parameters of the L5 nerve root during simulated intraoperative reduction of high-grade spondylolisthesis. A standard posterior approach to the lumbosacral junction was performed in eight fresh-frozen cadavers with lumbosacral or lumbopelvic screw fixation. Wide decompressions of the spinal canal and L5 nerve roots with complete facetectomies were accomplished with full exposure of the L5 nerve roots. A 100% translational slip was provoked by release of the iliolumbar ligaments and cutting the disc with the attached anterior longitudinal ligament. To evaluate the path of the L5 nerves during reduction maneuvers, metal bars were inserted bilaterally at the inferomedial aspects of the L5 pedicle at a distance of 10 mm from the midpoint of the L5 pedicle screws. There was no measurable change in length of the L5 nerve roots after 50% and 100% reduction of spondylolisthesis. Mechanical strain or displacement during reduction is an unlikely cause of L5 nerve root injury. Further anatomical or physiological studies are necessary to explore alternative mechanisms of L5 nerve palsy in the setting of high-grade spondylolisthesis correction, and surgeons should favor extensive surgical decompression of the L5 nerve roots when feasible.

Cortical screw placement with a spinous process clamp guide: a cadaver study accessing accuracy.

BACKGROUND AND OBJECTIVE: The Cortical Bone Trajectory (CBT) technique provides an alternative method for fixation in the lumbar spine in patients with osteoporosis. An accuracy CBT screw placement could improve mechanical stability and reduce complication rates. PURPOSE: The purpose of this study is to explore the accuracy of cortical screw placement with the application of implanted spinous process clip (SPC) guide. METHODS AND MATERIALS: Four lumbar specimens with T12-S1 were used to access the accuracy of the cortical screw. The SPC-guided planning screws were compared to the actual inserted screws by superimposing the vertebrae and screws preoperative and postoperative CT scans. According to preoperative planning, the SPC guide was adjusted to the appropriate posture to allow the K-wire drilling along the planned trajectory. Pre and postoperative 3D-CT reconstructions was used to evaluate the screw accuracy according to Gertzbein and Robbins classification. Intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to examine SPC-guided agreements for CBT screw placement. RESULTS: A total of 48 screws were documented in the study. Clinically acceptable trajectory (grades A and B) was accessed in 100% of 48 screws in the planning screws group, and 93.8% of 48 screws in the inserted screws group (p = 0.242). The incidence of proximal facet joint violation (FJV) in the planning screws group (2.1%) was comparable to the inserted screws group (6.3%) (p = 0.617). The lateral angle and cranial angle of the planned screws (9.2 ± 1.8° and 22.8 ± 5.6°) were similar to inserted screws (9.1 ± 1.7° and 23.0 ± 5.1°, p = 0.662 and p = 0.760). Reliability evaluated by intraclass correlation coefficients and Bland-Altman showed good consistency in cranial angle and excellent results in lateral angle and distance of screw tip. CONCLUSIONS: Compared with preoperative planning screws and the actually inserted screws, the SPC guide could achieve reliable execution for cortical screw placement.