Clean-label products: Factors affecting liking and acceptability by Portuguese older adults.

Consumers are preferring more "natural" foods, made of "healthier" and "familiar" components - the "clean-label" trend. As the population ages, understanding the older adult consumer segment becomes increasingly important. This study aims to identify the factors influencing the acceptability and liking of clean-label products in older adults living in the community. A convenience sample of 100 older adults was used for this cross-sectional study. Socio-demographic data, health status, independence level, lifestyle characteristics, nutritional status, and food and nutrient intake data were collected. The acceptability and liking for clean-label products comprised two parts: Sensory analysis with overall liking evaluation of three pairs of products, using a 9-point hedonic scale and free comments; Willingness to eat and preference assessment of nine pairs of products using the Food Action scale and a simple preference test. The participants were 80% female with a mean age of 75 years old. The overall liking for clean-label versions of cookies and mayonnaise was lower than for traditional versions. However, participants were more willing to eat the clean-label versions of products, particularly ham and yogurt. Most of the participants would prefer buying the clean-label version of all nine pairs of products, especially for ham, loaf bread, sausages, and yogurt. In sum, older adults living in the community exhibit a lower liking but, a greater willingness to eat and a higher preference for buying clean-label products. Older adults who favor clean-label products have higher levels of education and are reported to have a more adequate diet.

Formulation and Characterization of Soybean Oil-in-Water Emulsions Stabilized Using Gelatinized Starch Dispersions from Plant Sources.

Consumers are concerned about employing green processing technologies and natural ingredients in different manufacturing sectors to achieve a "clean label" standard for products and minimize the hazardous impact of chemical ingredients on human health and the environment. In this study, we investigated the effects of gelatinized starch dispersions (GSDs) prepared from six plant sources (indica and japonica rice, wheat, corn, potatoes, and sweet potatoes) on the formulation and stability of oil-in-water (O/W) emulsions. The effect of gelatinization temperature and time conditions of 85-90 °C for 20 min on the interfacial tension of the two phases was observed. Emulsification was performed using a primary homogenization condition of 10,000 rpm for 5 min, followed by high-pressure homogenization at 100 MPa for five cycles. The effects of higher oil weight fractions (15-25% w/w) and storage stability at different temperatures for four weeks were also evaluated. The interfacial tension of all starch GSDs with soybean oil decreased compared with the interfacial tension between soybean oil and water as a control. The largest interfacial tension reduction was observed for the GSD from indica rice. Microstructural analysis indicated that the GSDs stabilized the O/W emulsion by coating oil droplets. Emulsions formulated using a GSD from indica rice were stable during four weeks of storage with a volume mean diameter (d4,3) of ~1 µm, minimal viscosity change, and a negative ζ-potential.

Yellow mustard gum: pilot-scale production and characterization.

BACKGROUND: Yellow mustard gum (YMG), which is extracted from the mucilaginous part of yellow mustard bran, has been considered an emerging natural hydrocolloid gum but lacks commercial development and production. To promote the commercial utilization of YMG, this study developed a pilot-scale YMG production protocol in an economic and environmentally friendly way to produce a clean-label YMG product. This YMG produced at pilot scale (YMW) was characterized in terms of chemical composition, rheological properties, and interaction with a commercial gum, κ-carrageenan, and was compared with purified YMG through ethanol precipitation (YME). RESULTS: The protocol processed up to 100 L of raw material with zero solvent and a minimal number of steps and showed strong quasi-industrial potential. The YMW showed a similar chemical composition as YME. However, the YMW contained a slightly lower amount of carbohydrate and a much larger amount of ash and potassium than the YME. The rheological results concluded that both the YMW and YME solutions exhibited shear-thinning flow behavior and a weak gel, with YME showing higher viscosity and stronger gel structure. Most interestingly, YMW could form unpourable gels when blended with native κ-carrageenan whereas YME barely achieved this despite the equivalent total gum concentration. CONCLUSION: This study demonstrated the feasibility of YMG production at a large scale with economic and green procedures and discovered its new functionality for commercial utilization. The gelling ability of YMG could provide it with wider applications as a result of a new potential synergistic combination. All this information should accelerate the process of full commercialization of YMG as a clean-label functional ingredient. © 2024 His Majesty the King in Right of Canada. Journal of The Science of Food and Agriculture © 2024 Society of Chemical Industry. Reproduced with the permission of the Minister of Agriculture and Agri-Food Canada.

Comprehensive review of clean-label antimicrobials used in dairy products.

Consumers expect safe, healthy, natural, and sustainable food. Within the food industry, ingredient use is changing due to these consumer demands. While no single agreed-upon definition of clean label exists, a "clean label" in the context of food refers to a product that has a simplified and transparent ingredient list, with easily recognizable and commonly understood components to the general public. Clean-label products necessitate and foster a heightened level of transparency between companies and consumers. Dairy products are vulnerable to being contaminated by both pathogens and spoilage microorganisms. These microorganisms can be effectively controlled by replacing conventional antimicrobials with clean-label ingredients such as protective cultures or bacterial/fungal fermentates. This review summarizes the perspectives of consumers and the food industry regarding the definition of "clean label," and the current and potential future use of clean-label antimicrobials in dairy products. A key goal of this review is to make the concept of clean-label antimicrobial agents better understood by both manufacturers and researchers.

Recent advances in probiotic breads; a market trend in the functional bakery products.

Although bread is the main consumed staple food worldwide containing essential micro- and macronutrients, incorporation of probiotics (PRO) into this nondairy product has been less documented. Due to the mechanical and thermal stresses during bread-making process, production of PRO bread (PRO-BR) is dependent on development of emerging strategies like edible coating, encapsulation, three-dimensional printing, and application of thermophilic PRO strains. In the present study, novel technological and formulation aspects of PRO-BR, as well as critical conditions for obtaining products with guaranteed PRO potential have been reviewed. The biological functionality of these products, their scale up, marketing and commercial success factors are also highlighted. Production of functional PRO-BR containing bioactive compounds, phytochemicals and prebiotic components as an emerging field also affects dough rheology and textural features, sensory attributes and shelf-life of the final product. Recent data has revealed the effect of PRO on acrylamide content and staling rate of the produced bread. Furthermore, there are clinical evidences confirming the effects of PRO and synbiotic breads on reduction of triacylglycerol, low-density lipoprotein, insulin level and malondialdehyde, along with the increase of nitric oxide in the patients with type II diabetes.

Natural alternatives for processed meat: Legislation, markets, consumers, opportunities and challenges.

Consumers' interest in food with less and/or free from synthetic additives has increased considerably in recent years. In this context, researchers and industries have concentrated efforts on developing alternatives to these compounds. Replacing synthetic additives in meat products is a challenge, given their importance for sensory characteristics and food safety. Complementary technologies combined with the replacement and/or reduction of synthetic additives (hurdle technologies) has been studied focusing on the protection and extension of the shelf life of meat products. This review reports alternatives for replacing and/or reducing the use of synthetic additives in meat derivatives, aiming at the development of more natural and simpler meat products, familiar to consumers and considered clean labels.

Edge-Cloud Collaborative Defense against Backdoor Attacks in Federated Learning.

Federated learning has a distributed collaborative training mode, widely used in IoT scenarios of edge computing intelligent services. However, federated learning is vulnerable to malicious attacks, mainly backdoor attacks. Once an edge node implements a backdoor attack, the embedded backdoor mode will rapidly expand to all relevant edge nodes, which poses a considerable challenge to security-sensitive edge computing intelligent services. In the traditional edge collaborative backdoor defense method, only the cloud server is trusted by default. However, edge computing intelligent services have limited bandwidth and unstable network connections, which make it impossible for edge devices to retrain their models or update the global model. Therefore, it is crucial to detect whether the data of edge nodes are polluted in time. This paper proposes a layered defense framework for edge-computing intelligent services. At the edge, we combine the gradient rising strategy and attention self-distillation mechanism to maximize the correlation between edge device data and edge object categories and train a clean model as much as possible. On the server side, we first implement a two-layer backdoor detection mechanism to eliminate backdoor updates and use the attention self-distillation mechanism to restore the model performance. Our results show that the two-stage defense mode is more suitable for the security protection of edge computing intelligent services. It can not only weaken the effectiveness of the backdoor at the edge end but also conduct this defense at the server end, making the model more secure. The precision of our model on the main task is almost the same as that of the clean model.

Influence of Methods of Corn Starch Modification and Used Sweetener on the Functional Properties of Blackberry Jelly-like Dessert.

A study was conducted on selected physicochemical properties of blackberry jelly-like desserts (kissel) prepared from physically modified starches (with various degrees of inhibition) and chemically modified starches (with various degrees of cross-linking). The desserts were conventionally sweetened with saccharose (S) or, as a dietary alternative, xylitol (X). The characteristics of changes in the viscosity of the kissels as a function of temperature and time were determined. It was noted that regardless of the sweetener used, the viscosity of the kissels increased with the decreasing degree of inhibition (high < medium < low). Regardless of the kind of modification of the starch used for the preparation of the kissels and of the kind of sweetener, thixotropy was observed. Desserts prepared from inhibited starch with xylitol (CL + X) were characterised by the biggest range of their hysteresis loop. Progressing retrogradation was noted with the decrease in the temperature of the experiment (+20 °C and +4 °C). After 7 days of storage, kissels sweetened with saccharose were characterised by a low transparency, which may indicate retarded retrogradation; however, on day 28, the transparency significantly increased, exceeding the values of transmittance for samples sweetened with xylitol. The tendency towards syneresis was tested at +4 °C and −22 °C. The substitution of saccharose with xylitol only caused a slight modification of viscosity. Regardless of the sweetener used and of the level of starch inhibition, lower ranges of the hysteresis loop were noted (apart from CL + X) than in the case of kissels obtained from chemically modified starches. Distinctly lower values of kissel "aging" indices were noted in the case of samples obtained from inhibited starches, and their colour did not significantly differ in relation to the dessert prepared from native starch.

Andean purple maize to produce extruded breakfast cereals: impact on techno-functional properties and sensory acceptance.

BACKGROUND: Andean purple maize (APM) is an ancient crop widely used as a natural coloring in traditional Peruvian cuisine. However, it has been little explored within the food industry. The present study assessed how APM impacts on techno-functional properties and sensory acceptance of breakfast cereals. Extruded samples formulated with 100, 75, 50, and 25% APM, and complemented with yellow corn grits (YCG), were analyzed for their techno-functional and sensory properties. RESULTS: Increases in bulk density, as well as reduction in the expantion and porosity were observated for extrudates containing ≥ 50% APM, accompanied by an increase in purple color intensity. Increase in milk absorption index, reduction in milk solubility index and decrease in cereal hardness with increase in APM were also observed. Despite this, APM extented the cereal bowl-life. High sensory scores of overall liking (6) and color (7) were obtained for extruded formulations containing ≥ 50% APM and low values for extrudates with 25% APM. Aroma, flavor, and texture scores did not present significant differences. CONCLUSION: APM is an ingredient with the potential to be used to produce breakfast cereals since it improves their techno-functional characteristics and sensory acceptance, at the same time, it leads to the production of healthy, nutritious, and sustainable food. © 2022 Society of Chemical Industry.

An Australian perspective on "clean" dietary labels: Commentary on Negowetti et al. (2021).

"Clean eating" is an increasingly popular diet trend in Western countries with links to disordered eating behaviors. However, the definition of "clean" is a highly contentious issue. Negowetti, Ambwani, Karr, Rodgers, and Austin explore this important issue from a U.S. perspective conducting a scoping review of the public health implications of the use of "clean" labels on food, including legal and policy implications. The review showed that the U.S. Food and Drug Administration (FDA) has taken little action to address regulation of the use of "clean" dietary labels. Our own brief investigations suggest that the landscape in Australia under the Food Standards Australia New Zealand authority is similar. We discuss recommendations made by Negowetti et al. to address this issue in the United States, such as the FDA providing industry guidance on the term "clean," and the issuing of warning letters to companies who contravene this guidance. However, we predict that educating consumers to be more critical of unsubstantiated food labels in public health campaigns will be the most efficient way to change consumer behavior and address the "clean eating" diet trend. We also encourage eating disorder researchers and clinicians to be an influential part of this discussion.

High-pressure processing of fish and shellfish products: Safety, quality, and research prospects.

Seafood products have been one of the main drivers behind the popularity of high-pressure processing (HPP) in the food industry owing to a high demand for fresh ready-to-eat seafood products and food safety. This review provides an overview of the advanced knowledge available on the use of HPP for production of wholesome and highly nutritive clean label fish and shellfish products. Out of 653 explored items, 65 articles published during 2016-2021 were used. Analysis of the literature showed that most of the earlier work evaluated the HPP effect on physicochemical and sensorial properties, and limited information is available on nutritional aspects. HPP has several applications in the seafood industry. Application of HPP (400-600 MPa) eliminates common seafood pathogens, such as Vibrio and Listeria spp., and slows the growth of spoilage microorganisms. Use of cold water as a pressure medium induces minimal changes in sensory and nutritional properties and helps in the development of clean label seafood products. This technology (200-350 MPa) is also useful to shuck oysters, lobsters, crabs, mussels, clams, and scallops to increase recovery of the edible meat. High-pressure helps to preserve organoleptic and functional properties for an extended time during refrigerated storage. Overall, HPP helps seafood manufacturers to maintain a balance between safety, quality, processing efficiency, and regulatory compliance. Further research is required to understand the mechanisms of pressure-induced modifications and clean label strategies to minimize these modifications.

The clean label trend: An ineffective heuristic that disserves both consumers and the food industry?

What started around the late 2000s as the "Clean Label" (CL) trend has now become a meaningful segment of the food market, appealing to consumers who want foods made of a limited number of simple and recognizable ingredients. However, this description and tentative definitions of CL foods are vague, subject to multiple interpretations, and CL remains an informal denomination for foods, making consumers' demands and food manufacturers' offerings hardly compatible. Therefore, rather than attempting an illusory definition of CL foods, this narrative review aims to (1) show how CL appears to be a heuristic used by consumers to attempt to make safe and healthful food choices, (2) discuss how this heuristic overlooks many critical aspect of food safety and healthfulness and is consequently ineffective to guide consumers' choices, and (3) discuss the implications of the CL trend on the food chain's stakeholders and their relationships.

The effect of high-pressure jet processing on cocoa stability in chocolate milk.

Fat-free chocolate milk formulations containing skim milk, cocoa powder, and sugar were thermally treated and then processed using high-pressure jet (HPJ) technology from 125 to 500 MPa. The rheological properties and stability of HPJ-treated chocolate milks were compared with controls (no HPJ processing) prepared both with and without added κ-carrageenan. As expected, carrageenan-free chocolate milk exhibited immediate phase separation of the cocoa powder, whereas formulations containing κ-carrageenan were stable for 14 d. An increased stability was observed with increasing HPJ processing pressure, with a maximum observed when chocolate milk was processed at 500 MPa. The apparent viscosity at 50 s-1 of HPJ-processed samples increased from ~3 mPa·s to ~9 mPa·s with increasing pressure, and shear-thinning behavior (n < 0.9) was observed for samples processed at HPJ pressures ≥250 MPa. We suggest that HPJ-induced structural changes in casein micelles and new casein-cocoa interactions increased cocoa stability in the chocolate milk. Because casein seemed to be the major component enhancing cocoa stability in HPJ-treated samples, a second study was conducted to determine the effect of additional micellar casein (1, 2, or 4%) and HPJ processing (0-500 MPa) on the stability of fat-free chocolate milk. Formulations with 4% micellar casein processed at 375 and 500 MPa showed no phase separation over a 14-d storage period at 4°C. The addition of micellar casein together with HPJ processing at 500 MPa resulted in a higher apparent viscosity (~17 mPa·s at 50s-1) and more pronounced shear-thinning behavior (n ≤ 0.81) compared with that without added micellar casein. The use of HPJ technology to improve the dispersion stability of cocoa provides the industry with a processing alternative to produce clean-label, yet stable, chocolate milk.

Effect of high-pressure-jet processing on the physiochemical properties of low-fat ice cream mix.

The objective of this study was to use high-pressure-jet (HPJ) processing to produce functional properties in a low-fat (4.5% fat) ice cream mix similar to those seen when emulsifiers are used. Ice cream mix or serum (nonfat portion of the ice cream mix) were subjected to 200 or 400 MPa HPJ processing and compared with a non-HPJ-treated control. A similar non-HPJ-treated formulation but containing polysorbate 80 (0.075% wt/wt) was also used as a control. The mix samples were characterized in terms of their particle size, density, flow properties, stability, crystallization kinetics, and fat-protein interactions. The sample from the mix subjected to 400 MPa HPJ processing (HPJ-M-400) had increased consistency coefficient (5°C; 228 ± 102.7 mPa·s) and particle size (D[4,3]; 16.0 ± 2.5 µm) compared with the non-HPJ-treated control sample, with viscosity and particle size (volume-moment mean diameter, D[4,3]) values of 7.5 ± 0.4 mPa·s and 0.50 ± 0.1 µm, respectively. These differences were attributed to an increase in casein-fat interactions and casein-casein interactions caused by the 400 MPa HPJ treatment, which were observed using confocal scanning laser microscopy and inferred from an increase in protein and fat concentrations in the sediment after ultracentrifugation. Interestingly, the density of HPJ-M-400 was also lower (0.79 ± 0.17 g/mL) than that of the control (1.04 ± 0.00 g/mL) because bubbles were trapped within these complexes. The large casein-fat complexes formed in the HPJ-M-400 sample also appeared to act as steric barriers that slowed ice crystal growth during quiescent freezing. The alterations in physiochemical properties and apparent ice crystal growth induced by the 400 MPa treatment of low-fat ice cream mix have many potential applications, including clean-label confections.

Go clean label: replacement of commercial dough strengtheners with hard red spring wheat flour in bread formulations.

There is growing interest in the application of natural ingredients to replace chemical dough improvers in bread formulations in order to meet consumer demands of clean label products. The goal of this study was to evaluate the dough quality and baking quality of hard red spring (HRS) wheat flour blends to replace commercial dough improvers. Hard red winter (HRW) wheat flour is commonly used in bread and diner roll formulations. In this study, doughs were prepared by adding 10%, 20%, 30%, and 40% of HRS wheat flour to HRW wheat base-flour to compare the dough quality and baking quality relative to different levels of commercial improvers. Additional to commercial HRS flour, two commonly grown HRS wheat varieties (Glenn and Linkert) were included in the study. All of the HRS wheat flour blends had significantly (p < 0.05) higher farinograph stability and extensograph resistance at 135 min than doughs containing most of the commercial additives. Bread flour with 40% Glenn and 40% Linkert showed the highest loaf volumes of 920 cm3 and 950 cm3, respectively with the firmness of 1553.50 and 1525.50 mN, respectively. Baking quality of HRS wheat flour blends also showed significant (p < 0.05) correlation with dough rheology but commercial additives did not have the correlations. Therefore, HRS wheat flour may be used as a replacement for dough improvers, as it had better dough and bread properties compared to commercial additives and provides a great alternative for "clean-label" bread products.

"Clean label" as one of the leading trends in the meat industry in the world and in Poland ­ a review

The contemporary market of food products is highly variable. The reason for this is, among others the significant number of factors governing consumer choices in relation to food. Research results indicate that Polish consumers are increasingly declaring their interest in food features such as sensory and health properties, and safety. Most likely, social education, campaigns of food societies and own initiatives of food producers promoting new, "healthy" products have contributed to this. Among other things, the ever increasing consumer knowledge on the relationship between lifestyle and diet and health has become for many food businesses prerequisite for the development and marketing of new products. In food production in the world and in Poland the so-called "clean label" trend is one of fastest growing initiatives aimed at improving the health quality of foods. The "clean label" has not yet been defined in food law and is understood rather subjectively. Generally, this term is attributed to products free from "artificial" additives and produced by "natural" or based on a traditional recipe methods known to consumers. In the article, based on the available literature, selected trends in food production at the beginning of the 21st century, with particular emphasis on "clean label" have been discussed. Taking meat processing industry as an example, the measures undertaken by the companies of food industry to produce "clean label" food products have been illustrated. In addition, consumer attitudes toward contemporary trends in the food market, including meat and meat products, have been characterized. In conclusion, the need for legislative intervention to provide appropriate definition for the term "clean label" and the need for consumer education about assessment of quality of foods are emphasized.

Consumers' choice-blindness to ingredient information.

Food manufacturers and policy makers have been tailoring food product ingredient information to consumers' self-reported preference for natural products and concerns over food additives. Yet, the influence of this ingredient information on consumers remains inconclusive. The current study aimed at examining the first step in such influence, which is consumers' attention to ingredient information on food product packaging. Employing the choice-blindness paradigm, the current study assessed whether participants would detect a covertly made change to the naturalness of ingredient list throughout a product evaluation procedure. Results revealed that only few consumers detected the change on the ingredient lists. Detection was improved when consumers were instructed to judge the naturalness of the product as compared to evaluating the product in general. These findings challenge consumers' self-reported use of ingredient lists as a source of information throughout product evaluations. While most consumers do not attend to ingredient information, this tendency can be slightly improved by prompting their consideration of naturalness. Future research should investigate the reasons for consumers' inattention to ingredient information and develop more effective strategies for conveying information to consumers.

Learning a robust foundation model against clean-label data poisoning attacks at downstream tasks.

In the transfer learning paradigm, models that are pre-trained on large datasets are used as the foundation models for various downstream tasks. However, this paradigm exposes downstream practitioners to data poisoning threats, as attackers can inject malicious samples into the re-training datasets to manipulate the behavior of models in downstream tasks. In this work, we propose a defense strategy that significantly reduces the success rate of various data poisoning attacks in downstream tasks. Our defense aims to pre-train a robust foundation model by reducing adversarial feature distance and increasing inter-class feature distance. Experiments demonstrate the excellent defense performance of the proposed strategy towards state-of-the-art clean-label poisoning attacks in the transfer learning scenario.

Clean-label alternatives for food preservation: An emerging trend.

Consumer demand for natural or 'clean-label' food ingredients has risen over the past 50 years and continues growing. Consumers have become more aware of their health and, therefore, insist on transparency in the list of ingredients. Preservatives are the most crucial food additives, ensuring food safety and security. Despite tremendous technological advancements, food preservation remains a significant challenge worldwide, primarily because most are synthetic and non-biodegradable. As a result, the food industry is placing more value on microbiota and other natural sources for bio-preservation, leading to the substitution of conventional processing and chemical preservatives with natural alternatives to ensure 'clean-label.' General Standard for Food Additives (GSFA) includes some of these 'clean-label' options in its list of additives. However, they are very rarely capable of replacing a synthetic preservative on a 'one-for-one' basis, putting pressure on researchers to decipher newer, cleaner, and more economical alternatives. Academic and scientific research has led to the discovery of several plant, animal, and microbial metabolites that may function as effective bio-preservatives. However, most have not yet been put in the market or are under trial. Hence, the present review aims to summarise such relevant and potential metabolites with bio-preservative properties comprehensively. This article will help readers comprehend recent innovations in the 'clean-label' era, provide informed choices to consumers, and improve the business of regulatory approvals.

Alternative Additives for Organic and Natural Ready-to-Eat Meats to Control Spoilage and Maintain Shelf Life: Current Perspectives in the United States.

Food additives are employed in the food industry to enhance the color, smell, and taste of foods, increase nutritional value, boost processing efficiency, and extend shelf life. Consumers are beginning to prioritize food ingredients that they perceive as supporting a healthy lifestyle, emphasizing ingredients they deem acceptable as alternative or "clean-label" ingredients. Ready-to-eat (RTE) meat products can be contaminated with pathogens and spoilage microorganisms after the cooking step, contributing to food spoilage losses and increasing the risk to consumers for foodborne illnesses. More recently, consumers have advocated for no artificial additives or preservatives, which has led to a search for antimicrobials that meet these demands but do not lessen the safety or quality of RTE meats. Lactates and diacetates are used almost universally to extend the shelf life of RTE meats by reducing spoilage organisms and preventing the outgrowth of the foodborne pathogen Listeria monocytogenes. These antimicrobials applied to RTE meats tend to be broad-spectrum in their activities, thus affecting overall microbial ecology. It is to the food processing industry's advantage to target spoilage organisms and pathogens specifically.