Knowledge, attitudes, and practice related to tooth loss and dentures among patients with dental arch deficiencies.

BACKGROUND: Tooth loss is a common problem that affects many people worldwide. Exploring knowledge, attitude, and practice (KAP) among patients can identify barriers and challenges in following recommended practices, providing valuable insights for dental healthcare providers, policymakers, and researchers. This study aimed to explore the KAP of patients with dental arch deficiencies regarding tooth loss and dentures. METHODS: This web-based, cross-sectional study was conducted among patients with dental arch deficiencies using a self-designed questionnaire. RESULT: 3166 valid questionnaires were included. Participants' mean KAP scores were 6.84 ± 2.27 (possible range: 0 ~ 12), 39.4 ± 3.72 (possible range: 9 ~ 45), and 27.7 ± 4.36 (possible range: 8 ~ 40), respectively. Multivariable logistic regression analysis showed that knowledge (OR = 1.383), employed (OR = 1.805), family history (OR = 2.158), and treatment (OR = 1.683) were independently associated with attitude. Moreover, knowledge (OR = 1.239), attitude (OR = 1.250), female (OR = 0.619), age (OR = 0.967), college/bachelor (OR = 0.373), and master and above degree (OR = 0.418), employed (OR = 0.554) or student (OR = 0.434), with 10,001-20,000 Yuan household income per month (OR = 0.492), have been married (OR = 0.609), smoking (OR = 0.595), drinking (OR = 0.397), disease duration (OR = 0.972), with family history (OR = 1.676), and with treatment (OR = 3.492) were independently associated with practice (all P < 0.05). CONCLUSION: Patients with dental arch deficiencies have insufficient knowledge, positive attitudes, and moderate practice toward tooth loss and dentures, which might be affected by multiple demographic factors.

Customized planning of the visible maxillary arch width in harmony with interparopia width and smile width for female facial aesthetics.

BACKGROUND: The visible maxillary arch width (VAW) is an important aesthetic-determining feature. To date, there is no well-established methodology to determine the aesthetically optimal VAW in customized treatment planning. METHODS: In this study, the common traits of the dentofacial configuration were investigated in most attractive Asian and Caucasian female smiles. The smiling photo of a subject was digitally modified based on combined variations of VAW, smile width (SW), transverse facial dimensions (TFD), and vertical facial dimensions. These modified photos were assessed for aesthetics. The aesthetically essential parameters were identified, and their mathematic correlations and reference ranges were determined for different vertical facial patterns. Using the obtained results, a mathematic guidance was constructed for customized smile designing. The applicability of this guidance was tested in Asian females. RESULTS: The most attractive Asian and Caucasian female smiles have intraracial and interracial commonalities in the VAW-to-TFD ratios. The interparopia width (IPD) predominated over facial widths in determining well-matched VAW and SW. For optimal smile aesthetics, the VAW and SW were correlated as simulated by the formula 1.92 IPD ≤ VAW + 2.3 SW ≤ 2.17 IPD, plus the VAW-to-IPD ratio within 0.54 to 0.62 and the SW-to-IPD ratio within 0.61 to 0.71, ranges tailored to vertical facial patterns. This constitutes a mathematic guidance for customized planning of the aesthetically optimal VAW. This guidance was preliminarily validated to be applicable to Asian females. CONCLUSIONS: The VAW-to-TFD ratios were essential for Caucasian and Asian female smile aesthetics. The mathematic guidance could serve as a reference for customized smile designs for Asian females.

Cleft Laterality Dental Arch Relationship Outcomes for Children with Unilateral Cleft Lip and Palate in New Zealand.

OBJECTIVES: To investigate cleft laterality dental arch relationship outcomes of children with non-syndromic complete unilateral cleft lip and palate (UCLP) in New Zealand. DESIGN: A retrospective nationwide study. SETTINGS: Virtual 3D orthodontic study models collected prior to undertaking secondary alveolar bone grafting. PARTICIPANTS: A total of 104 patients with UCLP (L = 80: R = 24). OUTCOME MEASURES: Four calibrated assessors used the GOSLON Yardstick and 100 mm Visual Analogue Scale (VAS) to score the randomised models on 2 separate assessment sessions. Weighted Kappa were used to determine the intra/inter-rater reliability for the GOSLON and correlations for the VAS. RESULTS: Intra-rater reliability ranged from 0.57-0.88 (GOSLON) and 0.45-0.93 (VAS). Inter-rater reliability ranged from 0.62-0.86 (GOSLON) and 0.64-0.93 (VAS).GOSLON scores for the left UCLP were 31.2% for good/very good; 26.3% for fair; 42.5% for poor/very poor while the right UCLP scored 8.3% for good/very good; 37.5% for fair; 54.2% for poor/very poor. The mean VAS for left and right UCLP were 53.4 (sd 22.5) and 44.6 (sd 17.1) respectively. Neither the GOSLON nor VAS differences reached statistical significance (both P = .08). CONCLUSIONS: From a clinical perspective right UCLP had worse dental arch relationship outcomes, however, these differences failed to reach statistical significance. Further studies using larger sample sizes are required to determine if cleft laterality is an important consideration when investigating UCLP dental arch outcomes.

Prefabricated Trays Stock for Impression of Cleft lip and Palate Orthopedic Appliances: A Three-Dimensional Computational Analysis of Maxillary Jaws.

OBJECTIVE: This study aimed to propose digitally designed impression trays, for newborns with cleft lip and palate (CLP) defects, using the computer-assisted design and manufacturing (CAD/CAM) technique, based on measurements of width, length, and height made on processed and scanned plaster models. Thus, we will describe the different software and concepts that can be used for the design of these impression trays. DESIGN: A total of 59 plaster casts of newborn patients with CLP were collected and then scanned. After that, digital dental casts were three-dimensional (3D) evaluated, using precise anatomical landmarks. SETTING: The Maxillofacial Prosthodontics Team at the Dental consultation and treatment center in Rabat, Morocco. PATIENTS AND PARTICIPANTS: The study involved plaster casts of newborns with CLP, who had undergone presurgical neonatal treatment in the Maxillofacial Prosthodontics service in Rabat, Morocco. INTERVENTIONS: None. MAIN OUTCOME MEASURE(S): 3D evaluation of 59 scanned plaster casts of newborn patients with CLP. RESULTS: This work allowed us to obtain digital impression trays for each anatomical variation of orofacial clefts. These trays will limit the problems linked to conventional techniques for making neonatal orthopedic plates. We also emphasized the importance of a multidisciplinary approach involving several professionals in Morocco from various fields and specialties. CONCLUSION: This original technique is advantageous for the practitioner as well as for the patients and their parents. It allows for precise recording, better adaptation, time-saving, and parental comfort.

Association between shortened dental configurations and health outcomes: a scoping review.

This study mapped definitions of shortened dental configurations and health outcomes employed in association studies. A scoping review was conducted using the PubMed/Medline, Scopus, Web of Science, SciELO and Cochrane databases. Two trained researchers selected studies and extracted data. Studies that investigated the association between shortened dental configurations (exposure) and person-centered outcomes (general and oral health) related to health behavior (dietary patterns). Clinical outcomes were classified according to the International Classification of Functioning, Disability and Health and the International Classification of Diseases of the World Health Organization (WHO). Shortened dental configurations were defined as at least 20/21 teeth or the position of the teeth, including esthetics, dental occlusion and periodontal status (Eichner Index, Shortened Dental Arches, Functional Dentition Classification System, Posterior Occluding Pairs, Functional Tooth Units). The initial search resulted in 12,525 records in English, Portuguese and Spanish, 432 of which addressed the association of interest. General health (n = 203) and oral health (n = 201) were addressed in a similar number of studies. Most outcomes were related to general health (n = 184), the most frequent of which were endocrine, nutritional or metabolic diseases (n = 57) and mental functions (n = 26). Person-centered measures were addressed in 153 studies, most of which were about oral health and oral health-related quality of life (n = 62). Oral health outcomes were predominantly related to intake functions (n = 44) and diseases or disorders of the orofacial complex (n = 24). Dietary patterns (n = 43) and mortality (n = 38) were also studied. The cross-sectional design (n = 257) and non-probabilistic sampling (n = 218) were more frequent. The shortened dental configurations defined by the WHO were the most frequent in the studies (n = 206). The effects of shortened dental configurations have been investigated mainly in relation to endocrine, nutritional or metabolic diseases and measures of oral health-related quality of life. The findings point to a diversity of health outcomes assessed and substantial methodological variability.

Comparative analysis of the influence of the shapes and dimensions of dental arches on the morphotopogeometric characteristics of the facial area.

OBJECTIVE: Aim: The aim of the article is a comparative analysis of the main aspects of existing medical and diagnostic measures in patients with abnormal types of occlusal relationships and methods of mathematical and graphic reproduction of the shape of the dental arches, taking into account the individual characteristics of the maxillofacial area. PATIENTS AND METHODS: Materials and Methods: The search for relevant publications related to the objective topic was carried out through scientific databases: Scopus, PubMed, BVS and Scielo. CONCLUSION: Conclusions: The analysis of regression models of the reproduction of individual characteristics of the dental arch of the jaws will avoid errors that occur when comparing the actual sizes with their statistical norm, which will allow to correctly determine the proportionality and ratio of dif f erent departments of the dental and jaw system, the necessary amount of orthodontic measures in the treatment of anomalies of the dental arches.

Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

Inter-implant distance and buccal bone thickness for a novel implant design: a preclinical study.

OBJECTIVES: This study assessed bone height between novel tapered implants at different inter-implant thread peak (TP) distances, and the impact of TP distance from outer buccal bone (BB) on marginal bone levels (MBL). MATERIALS AND METHODS: Fully tapered implants with 0.5-mm thread depth and TP diameter 1 mm wider than the shoulder diameter were placed in healed ridges of minipigs. On one side, four implants were placed with inter-implant TP distances of 1, 2, or 3 mm corresponding to inter-implant implant shoulder distances of 2, 3, and 4 mm respectively. Three implants were placed on the other side with TP distances to outer BB of > 1 mm, 0.5-1 mm, or < 0.5 mm. After 12 weeks, (a) first bone-to-implant contact (fBIC), total BIC, bone area-to-total area (BATA), and coronal bone height between implants (Bi ½ max) for inter-implant distance, and (b) fBIC, BIC, and perpendicular crest to implant shoulder (pCIS) for BB were evaluated. RESULTS: No significant differences in bone healing and inter-implant bone height were noted for any of the TP distances. BB resorption was significant when TP distance to outer BB was < 0.5 mm. However, fBIC was lowest with TP to outer BB of 1.75 mm. CONCLUSIONS: Inter-implant bone height between adjacent implants can be maintained even at an inter-implant TP distance as low as 1 mm. A minimum TP to outer BB distance of 0.75 mm is required for predictable maintenance of MBL. CLINICAL RELEVANCE: Inter-implant distance and BB thickness are clinically relevant and require preclinical research to clarify concepts.

Three-dimensional relationship between the degree of bilateral impacted mandibular third molars angulation and the mandibular dental arch parameters: a cross-sectional comparative study.

OBJECTIVE: The purpose of this study was to three-dimensionally evaluate the relationship between the degree of bilateral impacted mandibular third molar (IM3M) angulation and the mandibular dental arch parameters in normal skeletal and dental malocclusion patients. MATERIALS AND METHODS: In this retrospective cross-sectional comparative study, 120 adult subjects' cone-beam computed tomography (CBCT) images were three-dimensionally analyzed. The sample included 120 adults aged 20-30 years, with a gender distribution of 51 male and 69 female participants. The sample was divided into 100 adults with bilateral IM3M (study group) and 20 adults with normal bilateral erupted M3M (control group). The study group was sub-divided into three groups according to the degree of IM3M buccolingual angulation (BL°): group A, < 12° on the center of the ridge (N = 30), group B, 12-24° off-center of the ridge (N = 40), group C, > 24° off-center of the ridge (N = 30). The study group was also sub-divided into two groups according to IM3M mesiodistal angulation (MD°): group 1 from 10 to 45° (N = 36), group 2 > 45° (N = 64). Comparison within and between groups was performed using one-way ANOVA followed by Tukey's post hoc test. The correlation between IM3M, BL, and MD angulation and the mandibular arch parameter was calculated using Pearson's correlation coefficient. RESULTS: Statistically significant differences (P < 0.001) were found between the IM3M BL° and anterior teeth inclination, arch length (AL), and inter-second molar width (inter 2nd MW) as well as between the IM3M MD° with anterior crowding and the arch length (P < 0.001). A significant positive correlation was found between IM3M BL° and anterior teeth inclination and between IM3M MD° and anterior teeth crowding and inter 2nd MW. A significant negative correlation was observed between IM3M BL° and inter 1st MW and 2nd MW. CONCLUSION: The degree of buccolingual and mesiodistal angulation of the impacted mandibular third molars was related with mandibular dentoalveolar changes. Increased buccolingual angulation is generally associated with increased anterior teeth inclination and decreased 1st and 2nd inter-molar width. The increase in mesiodistal angulations was generally related with increased anterior teeth crowding and 2nd inter-molar width. CLINICAL RELEVANCE: Assessment of the relationship between the impacted mandibular third molars and the degree of arch discrepancy, and the position of mandibular incisors in the three planes of space might help in the decision-making process for the extraction of the impacted third molars in adult patients.

Effects of two flap palatoplasty versus furlow palatoplasty with buccal myomucosal flap on maxillary arch dimensions in patients with cleft palate at the primary dentition stage: a cohort study.

OBJECTIVE: The objective of this study was to evaluate the effect of two flap palatoplasty (TFP) versus Furlow palatoplasty with buccal myomucosal flap (FPBF) on maxillary arch dimensions in children at the primary dentition stage with cleft palate, in comparison to matching subjects without any craniofacial anomalies. MATERIAL AND METHODS: This study included 28 subjects with an age range of 5-6 years; 10 non-cleft subjects were included in the control group, 9 patients treated with TFP, and 9 patients treated with FPBF. For the included patients, the maxillary models were scanned using a desktop scanner to produce virtual models, and the maxillary dimension measurements were virtually completed. The produced measurements were compared between the 3 groups. Maxillary models of the 28 participants were evaluated. RESULTS: Statistically insignificant differences were detected between the 3 groups for arch symmetry measurements. Differences were detected in the inter-canine width between the 2 surgical groups and non-cleft group. Both arch length and posterior palatal depth significantly differ while comparing the TFP to the control group, with no differences between FPBF and the non-cleft group. CONCLUSION: Furlow palatoplasty with buccal myomucosal flap might be considered a better surgical option than two flap palatoplasty for patients with cleft palate while evaluating maxillary arch dimensions at the primary dentition stage as a surgical outcome. CLINICAL RELEVANCE: This study gives insight into the surgical technique that has limited effect on the maxillary growth and dental arch dimension. Therefore, it decreases the need for orthodontic treatment and orthognathic surgery. TRIAL REGISTRATION: clinicaltrials.gov ( NCT05405738 ).

Force exerted on maxillary anterior teeth in mandibular unilateral and bilateral distal extension partial edentulous situation.

The purpose of this study was to determine the influence of mandibular unilateral and bilateral distal extension partial edentulous situation and the use of removable partial dental prostheses on the force exerted on maxillary anterior teeth. A commercially available jaw model with exchangeable teeth was used. Seven experimental conditions of mandibular distal extension edentulous situation were prepared and a distal extension removable partial dental prosthesis to replace missing posterior teeth was fabricated. The occlusal force was measured by inserting an occlusal force measuring film between the maxillary and mandibular teeth of the model. An occlusal load was applied and the forces and ratios were compared using the Kruskal-Wallis test and the Mann-Whitney U test (p < 0.05). As a result, the force exerted on the maxillary anterior teeth increased significantly as the number of remaining teeth decreased in unilateral and bilateral edentulous situation. The force exerted on the maxillary anterior teeth decreased significantly with use of a removable partial dental prosthesis. It is concluded that when the number of remaining teeth decreases in mandibular unilateral and bilateral distal extension partial edentulous situation, the burden on the maxillary anterior teeth increases. Our findings suggest that for patients with mandibular distal extension partial edentulous situation, using a removable partial dental prosthesis is effective in preserving the remaining teeth by reducing excessive force.

Arch Symmetry in Patients Without and With Cleft Lip and Palate After Orthodontic/Rehabilitative Treatment-A Stereophotogrammetry Study.

To evaluate and compare the dental arch symmetry of individuals with and without cleft lip and palate after orthodontic/rehabilitation treatment.Cross-sectional study.Tertiary cleft center in Brazil.Fifty-five participants aged between 18 and 30 years were divided into 3 groups according to treatment. Patients that received either a fixed partial denture (FPD) or implant-supported crown (ISC) in the cleft area or only orthodontic treatment, noncleft patients (NC).An analysis was performed using digitized dental casts scanned by laser and software. The following linear measurements were evaluated: incisor-canine; canine-molar; incisor-molar; surface and volume of the palatal region.Three-way ANOVA was used to compare the study factors: group (FPD/ISC/NC) and side (right/left) followed by the Tukey test to verify their interaction (α = .05).The results showed statistically significant differences among groups for the maxillary linear measurements canine-molar and incisor-molar, but not for incisor-canine. No statistically significant differences were found regarding the side for the maxillary measurements, while the factor interaction showed similarity only for incisor-canine. The mandibular measurements showed no statistical differences among groups, sides, or factor interactions. In surface and volume, all values in patients with cleft presented lesser than in without cleft patients.Regardless of the rehabilitation, arch symmetry can be achieved in the incisor-canine dimension in the cleft area.

Efficacy of Demineralized Bone Matrix for Revision Alveolar Bone Grafting in Patients Previously Treated with Bone Morphogenetic Protein 2 (BMP-2).

OBJECTIVE: This study investigates the effectiveness of demineralized bone matrix (DBX) to close alveolar clefts in patients previously treated with bone morphogenic protein-2 (BMP-2) who remained with bone nonunion. DESIGN: This is an IRB-approved retrospective, single-center study. SETTING: This study was conducted at a tertiary academic center. PATIENTS/PARTICIPANTS: We searched for all surgical encounters with the Current Procedural Terminology (CPT) code 42210 from the years 2013-2019. Included patients were diagnosed with cleft alveolus, previous BMP-2 exposure and required revision bone grafting during mixed dentition for persistent alveolar defects. INTERVENTIONS: 17 patients underwent revision alveolar bone grafting (ABG) with either DBX (n = 10) or autograft (n = 7) to repair persistent bony cleft. MAIN OUTCOME MEASURE(S): The primary study outcome measured was alveolar bone graft revision failure described as continued alveolar nonunion. RESULTS: The median age at revision ABG was 13.1 ± 3.3 years, with a mean follow-up time of 4.9 years (1.1-9.2 years). Patients were 53% male, 47% had a unilateral cleft lip and alveolus. 58.8% of patients were treated with DBX in the cleft, 41.2% treated with autograft from iliac crest. Overall, 11.8% (n = 2) of all revisions failed, requiring a second revision. The average time to reoperation was 2.06 years, and both were re-grafted with autograft. There was no statistically significant difference between the type of bone graft source used and the failure rate obtained (P = .1544). CONCLUSIONS: DBX and autologous iliac crest bone grafts achieve similar alveolar union rates during revision ABG in patients treated with previous BMP-2 to the alveolar cleft.

Differences in Practice in Alveolar Bone Grafting Among American Cleft Palate-Craniofacial Association Members.

The purpose of this study is to determine areas of agreement and disagreement among American Cleft Palate-Craniofacial Association (ACPA)members in the clinical practice of alveolar bone grafting (ABG), to guide further research to optimize ABG practices.A cross-sectional survey was conducted.The respondents were in an academic, combination, or private practice.The respondents were either plastic or oral and maxillofacial surgeons (OMFS) from various countries.A de-identified 24-question online survey was distributed to ACPA surgeon members utilizing the Research Electronic Data Capture (REDCap) tool.Data collected included surgeon specialty, use of various alveolar bone graft surgical techniques, as well as protocols.There was more variability than consensus between specialties with regards to the preoperative workup, timing of surgery, materials used for bone graft, surgical techniques, perioperative management, and postoperative evaluation. There was consensus on grafting during mixed dentition, not staging soft and hard tissue closure, and using iliac crest for primary and secondary grafting. Disagreements involved factors used to time the procedure and type of imaging used to assess viability. Technical differences involved incision type, part of bone grafted, use of minimally invasive technique, and material used for revisions.Aside from areas of consensus among surgeons on ABG, several areas, including use of bone substitutes in revision grafting, incision and type of iliac crest graft used during initial grafting, and postoperative protocols, had no consensus. These areas should be targets of further research to determine if there truly is an optimal method to perform ABG.The study was approved by the University of Illinois at Chicago Institutional Review Board. A de-identified 24-question online survey was distributed to surgeon members of the ACPA utilizing the REDCap tool on August 7, 2020. The survey questions consisted of multiple choice and multiple selection questions including an option to select "other" and specify the information in a blank space. Data collected included surgeon specialty, use of various alveolar bone graft surgical techniques, as well as pre and postoperative protocols. The full survey is included in online Supplemental material. Data analysis was performed in SPSS Statistics 27 (IBM Corp.). Descriptive statistics were performed, and chi-square was used to test for significant differences in survey responses between groups.

Long-term Outcome for Two-Stage Palatal Closure With Different Timings for Hard Palate Surgery: Craniofacial Growth and Dental Arch Relation.

OBJECTIVE: The aim was to evaluate dental arch relation and craniofacial growth for individuals born with unilateral cleft lip and palate (UCLP), who had two-stage palatal surgery, with hard palate closure (HPC) at the ages of 3 or 8 years. DESIGN: Longitudinal cohort study. SETTING: Ceft lip and palate team in Gothenburg, Sweden. PATIENTS: The inclusion criteria were nonsyndromic individuals born with complete UCLP who were consecutively operated according to two different surgical protocols; soft palate closure at 6 months followed by hard palate closure at the age of 3 years (HPC3) or at the age of 8 years (HPC8). In this evaluation, 28 individuals had HPC3 and 59 individuals had HPC8. INTERNVENTIONS: The main outcome, longitudinal series of dental casts and lateral radiographs from the ages of 5, 10, 16, and 19 years, were evaluated using GOSLON Yardstick and cephalometric analysis. RESULTS: At the age of 10 years, 78% of the individuals with HPC3 demonstrated GOSLON scores of 1 and 2 and 86% in HPC8. At the age of 19 years, 54% of the individuals exhibited GOSLON scores of 1or 2 when compared with 74% in HPC8. A statistical significant difference for SNA was observed at the age of 5 years (P = .004), with a lower SNA in HPC3, but not at the ages of 10, 16 and 19 years. At the final age, SNA was 75.2° for HPC3 and 76.8° for HPC8. CONCLUSIONS: The decrease in age for HPC did not have an adverse effect on long-term dental arch relationship or craniofacial growth.

Does the Transversus Abdominis Plane Block Reduce Morbidity Following Iliac Crest Bone Harvest in Pediatric Patients With Alveolar Clefts?

OBJECTIVE: The purpose of this study is to determine whether a Transversus Abdominis Plane (TAP) block can reduce donor site morbidity among pediatric patients undergoing iliac crest bone grafting for repair of their alveolar cleft. DESIGN: This retrospective cohort study was carried out at the Division of Dentistry at the Montreal Children's Hospital. Medical charts of patients who underwent alveolar cleft bone grafting between January 2011 and January 2021 were reviewed and they were divided into two groups, intraoperative TAP block and intraoperative local anesthesia infiltration (control group). The outcomes measured were patients' post-operative pain at the donor site, in-hospital narcotics requirements and length of stay. RESULTS: A total of 66 patients were included. There were no significant differences in pain scale among the TAP group and control group [1.9 (SD 2.5) and 1.3 (SD 2.1), respectively (p = 0.23)]. The mean length of stay for both groups was 1 day. Interestingly, there was a significant higher proportion of patients who required in-hospital opioids (morphine) in the TAP block group when compared to the control group (p = 0.03). CONCLUSIONS: The results of our study suggest there may be no role for a TAP block in reducing pain and improving opioid stewardship.

Racial Disparities in the Timing of Alveolar Bone Grafting.

Standard bone grafting between ages 6 and 12 has become the preferred treatment of choice for alveolar clefts. Given the importance of surgical timing in complete cleft palate repairs, it is important to identify any populations at-risk for delayed alveolar bone grafting. The purpose of this study is to identify whether a racial disparity is present nationally in the timing of alveolar bone grafting.Retrospective analysis Setting: Hospitals participating in the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP).Inclusion criteria involved patients who underwent alveolar bone grafting identified by current procedure terminology (CPT) code 42210 between years 2012 and 2019. Patients were stratified by age at time of operation based on the following parameters: early bone grafting (before 6 years of age), standard bone grafting (between 6 and 12 years of age), and late bone grafting (after 12 years of age).Racial and ethnic differences in the age of patients at the time of alveolar bone grafting.Overall, 20.28% of the cohort received alveolar bone graft after 12 years of age. African American (29.33%) and Hispanic (24.42%) patients received late alveolar bone grafting more frequently than other racial and ethnic groups (P < .001).Racial and ethnic disparities are present in the frequency at which patients receive late alveolar bone grafting for complete cleft palates. Given the suboptimal surgical results of late compared to standard alveolar bone grafting it is important to further investigate the driving factors of these disparities.

Labial Vestibular Flap Closure of the Cleft Palate Is Advantageous for Maxillary Development.

Objective: Using labial vestibular flap was performed to close the primary alveolar and hard palate cleft at the second stage of early 2-stage closure surgery for unilateral cleft lip and palate for minimizing the damage to the maxillary periosteum. We analyzed maxillary development to clarify the influence of cleft palate surgery. Design: Retrospective longitudinal study in 5 years after primary palatal closure. Setting: Institutional study Patients: Study subjects included 214 patients with nonsyndromic complete unilateral cleft lip and palate who were consecutively treated in our clinic. Main Outcome: We used a 3D dental model scanner to assess maxillary development in patients aged 3 months to 5 years after using either the conventional pushback method (PB) (51 cases) or 2-stage closure (Local palatal flap closure: LF [67 cases] and Labial vestibular flap closure: VF [96 cases]). Results: Comparing the measurement results, the major axis of maxilla, width, intercanine distance, and intermolar distance was significantly larger in the LF group compared to the PB group. After the age of 3, the cleft side of VF group had grown significantly to compare with LF group in width. It was also confirmed that the inserted labial mucosal flap itself grew. Enlargement of the labial mucosal flap was observed at all sites except the canine. Conclusion: Good maxillary growth occurred in the following order: VF groups > LF group > PB group. Poor growth was correlated with the extent of periosteal damage during surgery and the degree of postoperative bone surface exposure.

Moving toward patient specificity for devising cone-beam computed tomography field-of-views: A normative maxillary skeletal dimensional analysis.

BACKGROUND: A lack of evidence exists comprehensively assessing skeletal dimensions in a Caucasian population group at different ages. AIM: To provide age- and gender-specific normative skeletal dimensional measurements of the maxillary region using cone-beam computed tomography (CBCT) imaging. DESIGN: Cone-beam computed tomography images of Caucasian patients were acquired and divided into different age groups ranging from 8 to 20 years. Linear measurements were taken to evaluate seven distance-based variables, which included anterior nasal spine-posterior nasal spine (ANS-PNS) distance, bilateral maxillary first molar's central fossae (CF) distance, palatal vault depth (PVD), bilateral palatal cementoenamel junction (PCEJ) distance, bilateral vestibular CEJ (VCEJ) distance, bilateral jugulare distance (Jug) and arch length (AL). RESULTS: A total of 529 patients (243 male, 286 female) were selected. ANS-PNS and PVD showed the highest change in dimensions from 8 to 20 years of age. On the contrary, AL had the least variability in all age groups. Male patients had larger dimensions and showed a significant change in all dimensional measurements (p < .001) than female patients. CONCLUSION: The maxillary linear dimensions varied across different age groups. The presented maxillary normative data could serve as a reference guide for devising patient-specific CBCT field of views.

Effects of headgear timing on dental arch changes from 7 to 18 years of age: a follow-up study.

BACKGROUND: Dental arch effects after cervical headgear (CHG) treatment have been researched from several different perspectives. However, the long-term effects of CHG timing are still unknown. OBJECTIVES: To analyse the long-term effects of CHG timing on dental arches. MATERIAL AND METHODS: A total of 67 children with Angle Class II malocclusion comprised the study group in this trial. The participants were randomized into two equal-sized groups. In the early group (EG, n = 33), treatment was started after the eruption of the first upper molars. In the later-timed group (LG, n = 34), treatment was started 18 months later compared with the early group. Long-term effects were measured from dental casts taken at five time points between 7 and 18 years of age. RESULTS: The total maxillary dental arch length was achieved earlier, the gained length persisted better in the long term, and significantly more space was achieved in EG compared with LG (P = .048). The intermolar width in the maxillary dental arch was more stable and was reached earlier in EG compared with LG (P = .002). The results showed that in terms of total mandibular arch length increases, EG males benefited the most and LG females the least from CHG treatment (P = .031). CONCLUSIONS: Both genders benefited from earlier CHG treatment. The maxillary dental arches remained longer, and the final width was gained earlier in EG compared with LG.