Reported pain at work is a risk factor for vascular surgery trainee burnout.

BACKGROUND: Work-related pain is a known risk factor for vascular surgeon burnout. It risks early attrition from our workforce and is a recognized threat to the specialty. Our study aimed to understand whether work-related pain similarly contributed to vascular surgery trainee well-being. METHODS: A confidential, voluntary survey was administered after the 2022 Vascular Surgery In-Service Examination to trainees in all Accreditation Council for Graduate Medical Education-accredited vascular surgery programs. Burnout was measured by a modified, abbreviated Maslach Burnout Inventory; pain after a full day of work was measured using a 10-point Likert scale and then dichotomized as "no to mild pain" (0-2) vs "moderate to severe pain" (3-9). Univariable analyses and multivariable regression assessed associations of pain with well-being indicators (eg, burnout, thoughts of attrition, and thoughts of career change). Pain management strategies were included as additional covariables in our study. RESULTS: We included 527 trainees who completed the survey (82.2% response rate); 38% reported moderate to severe pain after a full day of work, of whom 73.6% reported using ergonomic adjustments and 67.0% used over-the-counter medications. Significantly more women reported moderate to severe pain than men (44.3% vs 34.5%; P < .01). After adjusting for gender, training level, race/ethnicity, mistreatment, and dissatisfaction with operative autonomy, moderate-to-severe pain (odds ratio, 2.52; 95% confidence interval, 1.48-4.26) and using physiotherapy as pain management (odds ratio, 3.06; 95% confidence interval, 1.02-9.14) were risk factors for burnout. Moderate to severe pain was not a risk factor for thoughts of attrition or career change after adjustment. CONCLUSIONS: Physical pain is prevalent among vascular surgery trainees and represents a risk factor for trainee burnout. Programs should consider mitigating this occupational hazard by offering ergonomic education and adjuncts, such as posture awareness and microbreaks during surgery, early and throughout training.

Physical job demands in pregnancy and associated musculoskeletal health and employment outcomes: a systematic review.

OBJECTIVE: A decline in musculoskeletal health during pregnancy is an underappreciated adverse outcome of pregnancy that can have immediate and long-term health consequences. High physical job demands are known risk factors for nontraumatic musculoskeletal disorders in the general working population. Evidence from meta-analyses suggest that occupational lifting and prolonged standing during pregnancy may increase risk of adverse pregnancy outcomes. This systematic review examined associations between occupational lifting or postural load in pregnancy and associated musculoskeletal disorders and related sequalae. DATA SOURCES: Five electronic databases (Medline, Embase, CINAHL, NIOSHTIC-2, and Ergonomic Abstracts) were searched from 1990 to July 2022 for studies in any language. A Web of Science snowball search was performed in December 2022. Reference lists were manually reviewed. STUDY ELIGIBILITY CRITERIA: Eligible studies reported associations between occupational lifting or postural load and musculoskeletal health or sequelae (eg, employment outcomes) among pregnant and postpartum workers. METHODS: Data were extracted using a customized form to document study and sample characteristics; and details of exposures, outcomes, covariates, and analyses. Investigators independently assessed study quality for 7 risk-of-bias domains and overall utility, with discrepant ratings resolved through discussion. A narrative synthesis was conducted due to heterogeneity. RESULTS: Sixteen studies (11 cohort studies, 2 nested case-control studies, and 3 cross-sectional studies) from 8 countries were included (N=142,320 pregnant and N=1744 postpartum workers). Limited but consistent evidence with variable quality ratings, ranging from critical concern to high, suggests that pregnant workers exposed to heavy lifting (usually defined as ≥22 lbs or ≥10 kg) may be at increased risk of functionally limiting pelvic girdle pain and antenatal leave. Moreover, reports of dose-response relationships suggest graded risk levels according to lifting frequency, ranging from 21% to 45% for pelvic girdle pain and 58% to 202% for antenatal leave. Limited but consistent evidence also suggests that postural load increases the risk of employment cessation. CONCLUSION: Limited but consistent evidence suggests that pregnant workers exposed to heavy lifting and postural load are at increased risk of pelvic girdle pain and employment cessation. Job accommodations to reduce exposure levels may promote safe sustainable employment for pregnant workers.

Bariatric Surgeon Ergonomics: A Comparison of Laparoscopy and Robotics.

INTRODUCTION: Bariatric surgery is routinely performed using laparoscopic and robotic approaches. Musculoskeletal injuries are prevalent among both robotic and laparoscopic bariatric surgeons. Studies evaluating ergonomic differences between laparoscopic and robotic bariatric surgery are limited. This study aims to analyze the ergonomic, physical, and mental workload differences among surgeons performing robotic and laparoscopic bariatric surgery. MATERIALS AND METHODS: All primary laparoscopic and robotic bariatric surgeries, Roux-en-Y gastric bypass, and sleeve gastrectomy between May and August 2022 were included in this study. Objective ergonomic analysis was performed by an observer evaluating each surgeon intraoperatively according to the validated Rapid Entire Body Assessment tool, with a higher score indicating more ergonomic strain. After each operation, surgeons subjectively evaluated their physical workload using the body part discomfort scale, and their mental workload using the surgery task load index. RESULTS: Five bariatric surgeons participated in this study. In total, 50 operative cases were observed, 37 laparoscopic and 13 robotic. The median total Rapid Entire Body Assessmentscore as a primary surgeon was significantly higher in laparoscopic (6.0) compared to robotic (3.0) cases (P < 0.01). The laparoscopic and robotic approaches had no significant differences in the surgeons' physical (body part discomfort scale) or mental workload (surgery task load index). CONCLUSIONS: This study identified low-risk ergonomic stress in surgeons performing bariatric surgery robotically compared to medium-risk stress laparoscopically. Since ergonomic stress can exist even without the perception of physical or mental stress, this highlights the importance of external observations to optimize ergonomics for surgeons in the operating room.

Using wearable technology for Posture Regulation to Improve Surgical Ergonomics in the paediatric operating room: the UPRISE trial: a pilot study.

BACKGROUND: The rising prevalence of work-related musculoskeletal disorders has numerous physical, financial, and mental repercussions for surgeons. This study aims to establish whether the use of a wearable posture device can improve the operating time spent in suboptimal, high-risk postures. METHODS: Surgeons were recruited in Phase 1 of this prospective randomised study and baseline postural data was obtained. In Phase 2, participants were randomised to receive either a traditional educational workshop or intraoperative vibrations from the device to correct postural lapses. During minor elective day cases, intraoperative postural data was collected and stratified by forward flexion angle, into five risk categories (negligible to very high). Participants' experience with the sensor was also assessed. RESULTS: A total of 100 surgical procedures (Phase 1: n = 50; Phase 2: n = 50) were performed by eight surgeons of varying seniority. Exposure to the educational intervention increased time spent in suboptimal posture (Phase 1 vs. Phase 2); 47.5% vs. 67.8%, p = 0.05. However, the vibrational intervention significantly reduced this time; 50.0% vs. 20.7%, p = 0.005. Procedure type didn't influence posture although, laparoscopic interventions spent most time in negligible-risk postures; 47.7% vs. 49.3%, compared to open procedures. Surgical consultants spent less time in suboptimal posture compared to fellow/registrars; 30.3% vs. 72.6% (Phase 1) and 33.8% vs. 65.3% (Phase 2). CONCLUSION: Vibrational intervention from the device significantly decreased the time spent in suboptimal, high-risk postures. As procedure type wasn't correlated with postural changes, surgeon-specific factors in regulating posture are paramount. Finally, surgeon experience was positively correlated with improved surgical ergonomics.

Robotic assisted surgery reduces ergonomic risk during minimally invasive colorectal resection: the VOLCANO randomised controlled trial.

PURPOSE: Minimally invasive surgery benefits patients but poor operating ergonomics causes musculoskeletal injuries in surgeons. This randomised controlled trial aims to assess whether robotic-assisted surgery with the open-console Versius® system can reduce surgeons' ergonomic risks during major colorectal resections. METHODS: Prospectively registered at ClinicalTrials.gov (NCT05262296) in March 2022. Adult patients requiring a minimally invasive colorectal resection were potentially eligible. Photographs taken at 2-min intervals were analysed using the objective Rapid Entire Body Assessment (REBA) posture analysis scale to calculate intraoperative surgeon ergonomic risk. Secondary outcomes included team communication (Oxford NOTECHS II), surgeon cognitive strain (modified NASA-TLX scale), and clinical outcomes. RESULTS: Sixty patients were randomised in a 2:1 ratio (40 robot, 20 laparoscopic). Mean age was 65yrs and 34 (57%) were male. Body Mass Index did not differ between the 2 groups (overall mean 29.0 ± 5) and there were equal proportions of left and right-colonic resections. REBA was significantly lower in the robotic arm (median robot REBA score 3 vs lap REBA 5 [p < 0.001]), equating to an injury risk category drop from "medium" to "low risk". There were no significant differences in team communication, operative duration, or patient outcomes. Surgeon cognitive strain was lower in robotic cases (mean robot 32.4 ± 10.3 vs lap 45.6 ± 14.3 [p < 0.001]). CONCLUSIONS: This trial demonstrates that robotic surgery with an open-console system reduces ergonomic risk scores and cognitive strain during colorectal resections, with no apparent detriment to team communication. This may therefore be a safe & feasible solution to the increasing problem of work-related musculoskeletal injuries in surgeons.

The impact of cardiorespiratory fitness and physical workload on disability pension-a cohort study of Swedish men.

OBJECTIVE: Understanding the impact of physical capacity in combination with high physical workload could be beneficial for the prevention of health-related exits from work. Therefore, the aim of this study was to investigate the separate and combined effects of low cardiorespiratory fitness and high physical workload on disability pension (DP) due to any cause, musculoskeletal disorders (MSD), and cardiovascular diseases (CVD). METHODS: A total of 279 353 men born between 1951 and 1961 were followed regarding DP between 2006 and 2020, ages 45-64. Cardiorespiratory fitness was assessed during military conscription, using an ergometer bicycle test. Physical workload was based on a job-exposure matrix (JEM) linked to occupational title in 2005. Cox regression models estimated separate and combined associations with DP. RESULTS: Low cardiorespiratory fitness and high physical workload were associated with increased risk of DP. For all cause DP, the fully adjusted hazard ratio and 95% confidence interval for those with low cardiorespiratory fitness was 1.38 (1.32-1.46) and for those with high physical workload 1.48 (1.39-1.57). For all cause and MSD DP, but not for CVD DP, the combination of low cardiorespiratory fitness and high physical workload resulted in higher risks than when adding the effect of the single exposures. CONCLUSION: Both low cardiorespiratory fitness in youth and later exposure to high physical workload were associated with an increased risk of DP, where workers with the combination of both low cardiorespiratory fitness and a high physical workload had the highest risks (all-cause and MSD DP).

Physical work environment in an activity-based flex office: a longitudinal case study.

OBJECTIVE: This study aimed to investigate and explore Occupational Health and Safety (OHS) management, office ergonomics, and musculoskeletal symptoms in a group of office workers relocating from cell offices to activity-based flex offices (AFOs). METHODS: The analysis was based on qualitative interview data with 77 employees and longitudinal questionnaire data from 152 employees. RESULTS: Results indicate that there was a need to clarify roles and processes related to the management of OHS. Self-rated sit comfort, working posture, and availability of daylight deteriorated and symptoms in neck and shoulders increased after the relocation and seemed to be influenced by many factors, such as difficulties adjusting the workstations, the availability of suitable workplaces, and age, sex, and individual needs. CONCLUSION: Research on the long-term effects of physical work environments and management of (OHS) issues after implementing activity-based flex offices is sparse. This study demonstrates the importance of planning and organising OHS issue management when implementing an AFO, and to carefully implement office ergonomics among office workers.

Integrating human factors engineering into your pediatric radiology practice.

Human factors engineering involves the study and development of methods aimed at enhancing performance, improving safety, and optimizing user satisfaction. The focus of human factors engineering encompasses the design of work environments and an understanding of human mental processes to prevent errors. In this review, we summarize the history, applications, and impacts of human factors engineering on the healthcare field. To illustrate these applications and impacts, we provide several examples of how successful integration of a human factors engineer in our pediatric radiology department has positively impacted various projects. The successful integration of human factors engineering expertise has contributed to projects including improving response times for portable radiography requests, deploying COVID-19 response resources, informing the redesign of scheduling workflows, and implementation of a virtual ergonomics program for remote workers. In sum, the integration of human factors engineering insight into our department has resulted in tangible benefits and has also positioned us as proactive contributors to broader hospital-wide improvements.

Musculoskeletal disorders among dental assistants: a cross-sectional study.

BACKGROUND: This study aims to investigate the prevalence of musculoskeletal disorders (MSDs) and associated sociodemographic and work-related factors among dental assistants (DAs) in the hail province, Saudi Arabia. METHODS: Participants were 119 DAs with an average age of 28.9 years (SD ± 4.8 years), of whom 86.6% were females. A self-administered questionnaire which included Nordic Musculoskeletal questionnaire and questions on socio-demographic and work-related factors was used. Descriptive statistics were used to calculate the prevalence of MSDs during the past 12 months and 7 days. Multivariate binary logistic regression statistical tests were used to calculate the association between MSDs and socio-demographic and work-related factors. RESULTS: The overall prevalence of MSDs among DAs was significantly high, with 85.7% reporting symptoms during the past 12 months and 47.9% during the past 7 days. The shoulders, followed by the lower back, were the most common complaints among participants in the past 12 months and 7 days, followed by the upper back and neck. Multivariate binary logistic regression analysis results show significant associations between MSDs and age, Body-Mass-Index (BMI), physical demands during working hours, work environment and posture awareness, and years of experience. CONCLUSIONS: The prevalence of MSDs among DAs is high, and sociodemographic and work-related factors play an important role in exacerbation of MSDs in DAs.

Risk assessment of healthcare workers' exposure to physical load in relation to patient handling and movement: a feasibility study of the instrument TilThermometer.

BACKGROUND: Work-related musculoskeletal disorders are common among healthcare workers (HCWs) but might be prevented by risk assessment and further promotion of occupational safety and health. The aim of this study was to investigate if the risk assessment instrument TilThermometer can be used to identify risk profiles of physical exposure in HCWs working with patient handling and movement (PHM). Further aims were to describe HCWs' perceptions and experiences of using the TilThermometer. METHODS: This feasibility study has a mixed design methodology. In total, 54 HCWs from 17 Swedish care units participated and performed risk assessments with the TilThermometer. Data collected from the risk assessments were used to identify risk profiles of physical exposure. HCWs' experiences of using the TilThermometer were collected from activity logs and analysed qualitatively. Three questionnaires were used to assess perceived acceptability, appropriateness, and feasibility of the risk assessment, and eight study specific questions were used for perceived usefulness. RESULTS: The TilThermometer was used at the care units by assessing each care recipient, and when compiling the data at a group level, a summarized risk profile for the care unit could be provided. Risk for physical exposure was reported as high in two work tasks; no care unit used the high-low adjustable seat when showering care recipients sitting down, and 13% used the recommended assistive devices when putting compression stockings on. However, 99% used high-low adjustable assistive devices when caring and bathing care recipients lying down. TilThermometer was described as easy to use, enabling team reflections and providing an overview of the care units' recipients and workload, but difficulties in categorizing for mobility groups were also reported. The TilThermometer was, on a five-point scale, perceived as acceptable (mean 3.93), appropriate (mean 3.9), and feasible (mean 3.97). These scores are in line with questions evaluating usefulness. CONCLUSION: The risk assessment provided risk profiles with potential to contribute to care units' development of a safe patient handling and movement practice. The findings suggest that the TilThermometer can be used to assess risks for physical exposure in relation to patient handling and movement in care units at hospital and nursing homes.

Prevalence of low back pain in professional drivers: a meta-analysis.

OBJECTIVE: This meta-review aimed to investigate the prevalence of low back pain (LBP) in professional drivers. STUDY DESIGN: This study is a meta-analysis. METHODS: PubMed, Scopus, Embase, and Web of Science were searched for cross-sectional studies on the prevalence of LBP in professional drivers up to August 2023. The Agency for Healthcare Research and Quality was utilized for cross-sectional analytical studies. Statistical analysis of the included outcome indicators was conducted using Stata 16.0. The prevalence of LBP among professional drivers was measured using the random effects model, and heterogeneity was evaluated utilizing subgroup analysis. This meta-analysis review was registered with PROSPERO on April 28, 2023, under the registration number CRD42023422205. RESULTS: In total, 1, 558 results met the inclusion and exclusion criteria, and 53 studies were included. The meta-analysis results indicated that professional drivers had a LBP prevalence of 35.0%, 95%CI (0.266, 0.433) for one week, 33.80%, 95%CI (0.233, 0.443) for one month, and 55.30%, 95%CI (0.503,0.603) for one year. In the global population of professional drivers, the prevalence of LBP was 56.0%, 95%CI (0.472, 0.648) and 54.5%, 95%CI (0.488, 0.602) without and with a history and high risk of LBP, respectively. CONCLUSIONS: LBP remains prevalent among international drivers and has multiple contributing factors, highlighting the urgent need for increased awareness and prevention strategies.

Biomechanical and ergonomic risks associated with cervical musculoskeletal dysfunction amongst surgeons: A systematic review.

INTRODUCTION: Surgeons are at high risk of developing musculoskeletal symptoms due to a range of factors including, maladaptive positioning and surgical ergonomics. Cervical muscle strain and biomechanical load is most prevalent due to repetitive motions and prolonged static neck positioning. This issue is apparent through reports of prevalence between 10 and 74.4% among surgeons. The aim of this systematic review is to provide an objective assessment of the clinical evidence available and a descriptive analysis of the effects of kinematics and surgical ergonomics on the prevalence of surgeons' cervical musculoskeletal pain. METHODS: This is PRISMA-compliant systematic review of clinical studies assessing the prevalence of cervical musculoskeletal dysfunction in surgeons by searching PUBMED and Ovid EMBASE databases from inception to 19th October 2023. Study quality was graded according to the National Institutes of Health study quality assessment tools. RESULTS: A total of 9 studies were included in the final qualitative analysis. The use of loupes, open surgery and excessive neck flexion (>30°) were associated with cervical dysfunction. Comparison of study outcomes was challenging due to heterogeneity within study methods and the paucity of methodological quality. CONCLUSION: The current literature assessing ergonomic and biomechanical factors predisposing surgeons to cervical musculoskeletal dysfunction is insufficient to provide reliable guidance for clinicians. Although the literature identifies factors contributing to work-related cervical dysfunction, few attempt to evaluate interventions for improved surgical ergonomics. An objective assessment of interventions that prompt postural correction with the aim to improve neck pain in surgeon cohorts is warranted.

Musculoskeletal disorders and visual problems among surgical versus medical physicians: A cross-sectional study.

The healthcare industry is one of the main industries with a high prevalence of musculoskeletal disorders (MSDs). Surgical practice mostly involves repetitive tasks with fine motor control, precise motions, high levels of mental concentration, and close visual focus. This cross-sectional study aimed to define the prevalence and risk factors of MSDs and visual problems among physicians. One hundred surgical physicians and one hundred medical physicians were involved in the study. Both groups underwent assessment of socio-demographic and occupational history, alongside evaluation for musculoskeletal and visual problems. The study revealed a significantly higher prevalence of MSDs, particularly neck and back pain, as well as blurred near vision and eye dryness, among surgical physicians compared to medical physicians. Risk factors for these conditions included long working hours (≥30 h/week) in clinics or operating rooms, as well as using endoscopes and microscopes/loupes during surgery. In conclusion, MSDs and visual problems were prevalent among physicians, particularly surgical physicians. Integrating ergonomic principles across all domains of healthcare and promoting healthcare worker awareness through training and intervention programs are crucial steps in addressing these issues.

Transparency as a Means to Analyse the Impact of Inertial Sensors on Users during the Occupational Ergonomic Assessment: A Systematic Review.

The literature has yielded promising data over the past decade regarding the use of inertial sensors for the analysis of occupational ergonomics. However, despite their significant advantages (e.g., portability, lightness, low cost, etc.), their widespread implementation in the actual workplace has not yet been realized, possibly due to their discomfort or potential alteration of the worker's behaviour. This systematic review has two main objectives: (i) to synthesize and evaluate studies that have employed inertial sensors in ergonomic analysis based on the RULA method; and (ii) to propose an evaluation system for the transparency of this technology to the user as a potential factor that could influence the behaviour and/or movements of the worker. A search was conducted on the Web of Science and Scopus databases. The studies were summarized and categorized based on the type of industry, objective, type and number of sensors used, body parts analysed, combination (or not) with other technologies, real or controlled environment, and transparency. A total of 17 studies were included in this review. The Xsens MVN system was the most widely used in this review, and the majority of studies were classified with a moderate level of transparency. It is noteworthy, however, that there is a limited and worrisome number of studies conducted in uncontrolled real environments.

Estimating Compressive and Shear Forces at L5-S1: Exploring the Effects of Load Weight, Asymmetry, and Height Using Optical and Inertial Motion Capture Systems.

This study assesses the agreement of compressive and shear force estimates at the L5-S1 joint using inertial motion capture (IMC) within a musculoskeletal simulation model during manual lifting tasks, compared against a top-down optical motion capture (OMC)-based model. Thirty-six participants completed lifting and lowering tasks while wearing a modified Plug-in Gait marker set for the OMC and a full-body IMC set-up consisting of 17 sensors. The study focused on tasks with variable load weights, lifting heights, and trunk rotation angles. It was found that the IMC system consistently underestimated the compressive forces by an average of 34% (975.16 N) and the shear forces by 30% (291.77 N) compared with the OMC system. A critical observation was the discrepancy in joint angle measurements, particularly in trunk flexion, where the IMC-based model underestimated the angles by 10.92-11.19 degrees on average, with the extremes reaching up to 28 degrees. This underestimation was more pronounced in tasks involving greater flexion, notably impacting the force estimates. Additionally, this study highlights significant differences in the distance from the spine to the box during these tasks. On average, the IMC system showed an 8 cm shorter distance on the X axis and a 12-13 cm shorter distance on the Z axis during lifting and lowering, respectively, indicating a consistent underestimation of the segment length compared with the OMC system. These discrepancies in the joint angles and distances suggest potential limitations of the IMC system's sensor placement and model scaling. The load weight emerged as the most significant factor affecting force estimates, particularly at lower lifting heights, which involved more pronounced flexion movements. This study concludes that while the IMC system offers utility in ergonomic assessments, sensor placement and anthropometric modeling accuracy enhancements are imperative for more reliable force and kinematic estimations in occupational settings.

Factors Affecting the Situational Awareness of Armored Vehicle Occupants.

In the field of armored vehicles, up to 70% of accidents are associated with low levels of situational awareness among the occupants, highlighting the importance of situational awareness in improving task performance. In this study, we explored the mechanisms influencing situational awareness by simulating an armored vehicle driving platform with 14 levels of experimentation in terms of five factors: experience, expectations, attention, the cueing channel, and automation. The experimental data included SART and SAGAT questionnaire scores, eye movement indicators, and electrocardiographic and electrodermal signals. Data processing and analysis revealed the following conclusions: (1) Experienced operators have higher levels of situational awareness. (2) Operators with certain expectations have lower levels of situational awareness. (3) Situational awareness levels are negatively correlated with information importance affiliations and the frequency of anomalous information in non-primary tasks. (4) Dual-channel cues lead to higher levels of situational awareness than single-channel cues. (5) Operators' situational awareness is lower at high automation levels.

A Brain-Controlled and User-Centered Intelligent Wheelchair: A Feasibility Study.

Recently, due to physical aging, diseases, accidents, and other factors, the population with lower limb disabilities has been increasing, and there is consequently a growing demand for wheelchair products. Modern product design tends to be more intelligent and multi-functional than in the past, with the popularization of intelligent concepts. This supports the design of a new, fully functional, intelligent wheelchair that can assist people with lower limb disabilities in their day-to-day life. Based on the UCD (user-centered design) concept, this study focused on the needs of people with lower limb disabilities. Accordingly, the demand for different functions of intelligent wheelchair products was studied through a questionnaire survey, interview survey, literature review, expert consultation, etc., and the function and appearance of the intelligent wheelchair were then defined. A brain-machine interface system was developed for controlling the motion of the intelligent wheelchair, catering to the needs of disabled individuals. Furthermore, ergonomics theory was used as a guide to determine the size of the intelligent wheelchair seat, and eventually, a new intelligent wheelchair with the features of climbing stairs, posture adjustment, seat elevation, easy interaction, etc., was developed. This paper provides a reference for the design upgrade of the subsequently developed intelligent wheelchair products.

Impact of Fatigue on Ergonomic Risk Scores and Foot Kinetics: A Field Study Employing Inertial and In-Shoe Plantar Pressure Measurement Devices.

(1) Background: Occupational fatigue is a primary factor leading to work-related musculoskeletal disorders (WRMSDs). Kinematic and kinetic experimental studies have been able to identify indicators of WRMSD, but research addressing real-world workplace scenarios is lacking. Hence, the authors of this study aimed to assess the influence of physical strain on the Borg CR-10 body map, ergonomic risk scores, and foot pressure in a real-world setting. (2) Methods: Twenty-four participants (seventeen men and seven women) were included in this field study. Inertial measurement units (IMUs) (n = 24) and in-shoe plantar pressure measurements (n = 18) captured the workload of production and office workers at the beginning of their work shift and three hours later, working without any break. In addition to the two 12 min motion capture processes, a Borg CR-10 body map and fatigue visual analog scale (VAS) were applied twice. Kinematic and kinetic data were processed using MATLAB and SPSS software, resulting in scores representing the relative distribution of the Rapid Upper Limb Assessment (RULA) and Computer-Assisted Recording and Long-Term Analysis of Musculoskeletal Load (CUELA), and in-shoe plantar pressure. (3) Results: Significant differences were observed between the two measurement times of physical exertion and fatigue, but not for ergonomic risk scores. Contrary to the hypothesis of the authors, there were no significant differences between the in-shoe plantar pressures. Significant differences were observed between the dominant and non-dominant sides for all kinetic variables. (4) Conclusions: The posture scores of RULA and CUELA and in-shoe plantar pressure side differences were a valuable basis for adapting one-sided requirements in the work process of the workers. Traditional observational methods must be adapted more sensitively to detect kinematic deviations at work. The results of this field study enhance our knowledge about the use and benefits of sensors for ergonomic risk assessments and interventions.

An Ergonomics Analysis of Archers through Motion Tracking to Prevent Injuries and Improve Performance.

Archery ranks among the sports with a high incidence of upper extremity injuries, particularly affecting the drawing shoulder and elbow, as well as inducing stress on the lower back. This study seeks to bridge the gap by integrating real-time human motion with biomechanical software to enhance the ergonomics of archers. Thirteen participants were involved in four tasks, using different bows with varied draw weights and shooting distances. Through the application of advanced integrative technology, this study highlights the distinct postures adopted by both males and females, which indicate the biomechanical differences between genders. Additionally, an analysis of the correlation between exposed spinal forces and these adopted postures provides insights into injury risk assessment during the key archery movements. The findings of this study have the potential to significantly enhance the application of training methodologies and the design of assistive devices. These improvements are geared towards mitigating injury risks and enhancing the overall performance of archers.

A Rapid Review on the Effectiveness and Use of Wearable Biofeedback Motion Capture Systems in Ergonomics to Mitigate Adverse Postures and Movements of the Upper Body.

Work-related diseases and disorders remain a significant global health concern, necessitating multifaceted measures for mitigation. One potential measure is work technique training utilizing augmented feedback through wearable motion capture systems. However, there exists a research gap regarding its current effectiveness in both real work environments and controlled settings, as well as its ability to reduce postural exposure and retention effects over short, medium, and long durations. A rapid review was conducted, utilizing two databases and three previous literature reviews to identify relevant studies published within the last twenty years, including recent literature up to the end of 2023. Sixteen studies met the inclusion criteria, of which 14 were of high or moderate quality. These studies were summarized descriptively, and the strength of evidence was assessed. Among the included studies, six were rated as high quality, while eight were considered moderate quality. Notably, the reporting of participation rates, blinding of assessors, and a-priori power calculations were infrequently performed. Four studies were conducted in real work environments, while ten were conducted in controlled settings. Vibration feedback was the most common feedback type utilized (n = 9), followed by auditory (n = 7) and visual feedback (n = 1). All studies employed corrective feedback initiated by the system. In controlled environments, evidence regarding the effectiveness of augmented feedback from wearable motion capture systems to reduce postural exposure ranged from strong evidence to no evidence, depending on the time elapsed after feedback administration. Conversely, for studies conducted in real work environments, the evidence ranged from very limited evidence to no evidence. Future reach needs are identified and discussed.