RESUMO
The potential of Ru(III)-mediated advanced oxidation processes has attracted attention due to the recyclable catalysis, high efficiency at circumneutral pHs, and robust resistance against background anions (e.g., phosphate). However, the reactive species in Ru(III)-peracetic acid (PAA) and Ru(III)-ferrate(VI) (FeO42-) systems have not been rigorously examined and were tentatively attributed to organic radicals (CH3C(O)Oâ¢/CH3C(O)OOâ¢) and Fe(IV)/Ru(V), representing single electron transfer (SET) and double electron transfer (DET) mechanisms, respectively. Herein, the reaction mechanisms of both systems were investigated by chemical probes, stoichiometry, and electrochemical analysis, revealing different reaction pathways. The negligible contribution of hydroxyl (HOâ¢) and organic (CH3C(O)Oâ¢/CH3C(O)OOâ¢) radicals in the Ru(III)-PAA system clearly indicated a DET reaction via oxygen atom transfer (OAT) that produces Ru(V) as the only reactive species. Further, the Ru(III)-performic acid (PFA) system exhibited a similar OAT oxidation mechanism and efficiency. In contrast, the 1:2 stoichiometry and negligible Fe(IV) formation suggested the SET reaction between Ru(III) and ferrate(VI), generating Ru(IV), Ru(V), and Fe(V) as reactive species for micropollutant abatement. Despite the slower oxidation rate constant (kinetically modeled), Ru(V) could contribute comparably as Fe(V) to oxidation due to its higher steady-state concentration. These reaction mechanisms are distinctly different from the previous studies and provide new mechanistic insights into Ru chemistry and Ru(III)-based AOPs.
Assuntos
Oxirredução , Rutênio , Rutênio/química , Transporte de Elétrons , Catálise , Ferro/químicaRESUMO
The chromogenic reaction between 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and ferrate [Fe(VI)] has long been utilized for Fe(VI) content measurement. However, the presence of electron-rich organic compounds has been found to significantly impact Fe(VI) detection using the ABTS method, leading to relative errors ranging from â¼88 to 100%. Reducing substances consumed ABTSâ¢+ and resulted in underestimated Fe(VI) levels. Moreover, the oxidation of electron-rich organics containing hydroxyl groups by Fe(VI) could generate a phenoxyl radical (Phâ¢), promoting the transformation of Fe(VI) â Fe(V) â Fe(IV). The in situ formation of Fe(IV) can then contribute to ABTS oxidation, altering the ABTSâ¢+:Fe(VI) stoichiometry from 1:1 to 2:1. To overcome these challenges, we introduced Mn(II) as an activator and 3,3',5,5'-tetramethylbenzidine (TMB) as a chromogenic agent for Fe(VI) detection. This Mn(II)/TMB method enables rapid completion of the chromogenic reaction within 2 s, with a low detection limit of approximately 4 nM and a wide detection range (0.01-10 µM). Importantly, the Mn(II)/TMB method exhibits superior resistance to reductive interference and effectively eliminates the impact of phenoxyl-radical-mediated intermediate valence iron transfer processes associated with electron-rich organic compounds. Furthermore, this method is resilient to particle interference and demonstrates practical applicability in authentic waters.
Assuntos
Elétrons , Oxirredução , Ferro/química , Compostos Orgânicos/química , Benzotiazóis/química , Ácidos SulfônicosRESUMO
In this work, the oxidation of gatifloxacin (GAT), fleroxacin (FLE) and enoxacin (ENO) in aqueous solution by ferrate (Fe(VI)) was systemically investigated. Weak alkaline and high oxidant doses were favorable for the reaction. The pseudosecond-order rate constants were 0.18055, 0.29162, and 0.05476 L/(mg·min), and the activation energies were 25.13, 15.25, and 11.30 kJ/mol at pH = 8.00 and n(Fe(VI)):n(GAT) = 30:1, n(Fe(VI)):n(FLE) = 20:1, n(Fe(VI)):n(ENO) = 40:1 and a temperature of 25 °C. The maximum degradation rates of the GAT, FLE and ENO were 96.72%, 98.48% and 94.12%, respectively, well simulated by Response Surface Methodology. During the oxidation, the contribution of hydroxyl radicals (HOâ¢) varied with time, whereas the final contribution was approximately 20% at 30 min. The removal efficiency was inhibited by anions by less than 10%, and cations by less than 25%, and significantly inhibited by high concentrations of humic acid. Moreover, two or three dominant reaction pathways were predicted, and the ring cleavages of quinolone and piperazine were mainly achieved through decarboxylation, demethlation and hydroxylation, and some pathways ended up with monocyclic chemicals, which were harmless to aquatic animals and plants. Theoretical calculations further proved that the reactions between FeO4- and neutral fluoroquinolone antibiotics were the major reactions. This work illustrates that Fe(VI) can efficiently remove fluoroquinolone antibiotics (FQs) in aqueous environments, and the results may contribute to the treatment of wastewater containing trace antibiotics and Fe(VI) chemistry.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Animais , Fluoroquinolonas , Água , Ferro , Oxirredução , Antibacterianos , Poluentes Químicos da Água/análise , Cinética , Purificação da Água/métodosRESUMO
Arsanilic acid (p-AsA), a prevalently used feed additive, is frequently detected in environment posing a great threat to humans. Potassium ferrate (Fe(VI)) was an efficient way to tackle arsenic contamination under acid and neutral conditions. However, Fe(VI) showed a noneffective removal of p-AsA under alkaline conditions due to its oxidation capacity attenuation. Herein, a magnetic iron-doped carbon nanotubes (F-CNT) was successfully prepared and further catalyzed Fe(VI) to remove p-AsA and total As species. The Fe(VI)/F-CNT system showed an excellent capability to oxidize p-AsA and adsorb total As species over an environment-related pH range of 6-9. The high-valent iron intermediates Fe(V)/Fe(IV) and the mediated electron-transfer played a significant part in the degradation of p-AsA according to the probes/scavengers experiments and galvanic oxidation process. Moreover, the situ formed iron hydroxide oxide and F-CNT significantly improved the adsorption capacity for total As species. The electron-donating groups (semiquinone and hydroquinone) and high graphitization of F-CNT were responsible for activating Fe(VI) based on the analysis of X-ray photoelectron spectroscopy (XPS). Density functional theory calculations and the detected degradation products both indicated that the amino group and the C-As bond of p-AsA were main reactive sites. Notably, Fe(VI)/F-CNT system was resistant to the interference from Cl-, SO42-, and HCO3-, and could effectively remove p-AsA and total As species even in the presence of complex water matrix. In summary, this work proposed an efficient method to use Fe(VI) for degrading pollutants under alkaline conditions and explore a new technology for livestock wastewater advanced treatment.
Assuntos
Arsênio , Compostos Férricos , Nanotubos de Carbono , Poluentes Químicos da Água , Purificação da Água , Humanos , Ferro/química , Ácido Arsanílico/química , Elétrons , Oxirredução , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Persulfate oxidants are widely used in soil remediation and wastewater treatment but perform poorly in degrading polycyclic aromatic hydrocarbons (PAHs), especially heavy fractions in solids. Herein, we propose the utilization of a green peroxymonosulfate-ferrate-FeS (PFI) oxidant as a promising process aid for remediating soils contaminated with heavy petroleum components, including asphaltenes and resins. The PFI oxidant could degrade heavy petroleum fractions because of dual activation of the peroxymonosulfate and ferrate by FeS at ambient conditions. Nevertheless, when dealing with soil with high oil content (>10%), the degradation efficiency remains limited (<30%) regardless of the quantity of oxidants employed. Surface elemental analysis shows that a coating of secondary products (Fe(OH)3, Fe2O3) on the surface and in pores of the soil-pollutant matrix explains the failure of oxidation and inefficient use of oxidant. To address this issue, a strategy of pre-solvent extraction-oxidation hybrid process with sequent acidic washing is proposed, where dichloromethane serves as the solvent, and PFI acts as the oxidant. In this system over 90% of the oil could be recovered with an oxidation efficiency of 80% by alleviating the problem of iron oxide coating the matrix surface. The oxidant consumption is also reduced to 70 wt% of the sludge. The PFI oxidant is found to exhibit excellent universality in treating oily sludge with low petroleum content (<2%), reducing the petroleum content in the residue to less than 0.3 wt% (meeting the national standards). The degradation of low oil content sludge by the PFI oxidant followed pseudo first-order kinetics. These findings not only elucidate the failure of PFI oxidation for high oil content oily sludge and identify its potential engineering application range, but also offer a practical strategy for processing petroleum-contaminated soil with varying oil contents through wet oxidation.
Assuntos
Recuperação e Remediação Ambiental , Oxidantes , Petróleo , Poluentes do Solo , Petróleo/análise , Oxidantes/química , Recuperação e Remediação Ambiental/métodos , Poluentes do Solo/química , Poluentes do Solo/análise , Ferro/química , Peróxidos/química , OxirreduçãoRESUMO
Ferrate (Fe(VI): HFeO4- /FeO42-), a potent oxidant, has been investigated as an alternative chemical disinfectant in water treatment due to its reduced production of disinfection by-products. In this study, we assessed the disinfecting ability of potassium ferrate against a variety of microorganisms, including waterborne pathogens, under varying pH and water temperature conditions. We presented CT values, a metric of ferrate concentrations (C) and contact time (T), to quantify microbial inactivation rates. Among the tested microorganisms, human adenovirus was the least resistant to ferrate, followed by waterborne bacteria such as Escherichia coli and Vibrio cholerae, and finally, the protozoan parasite Giardia duodenalis. We further investigated the impact of two pH values (7 and 8) and two temperatures (5 and 25 °C) on microbial inactivation rates, observing that inactivation rates increased with lower pH and higher temperature. In addition to showcasing ferrate's capacity to effectively inactivate a range of the tested microorganisms, we offer a ferrate CT table to facilitate the comparison of the effectiveness of various disinfection methods.
Assuntos
Desinfetantes , Giardia lamblia , Temperatura , Concentração de Íons de Hidrogênio , Desinfetantes/farmacologia , Giardia lamblia/efeitos dos fármacos , Adenovírus Humanos/efeitos dos fármacos , Compostos de Potássio/farmacologia , Compostos de Potássio/química , Microbiologia da Água , Desinfecção/métodos , Purificação da Água/métodos , Compostos de Ferro/farmacologia , Compostos de Ferro/química , Humanos , Escherichia coli/efeitos dos fármacosRESUMO
The combined process of biochar (BC) and potassium ferrate (PF) offers a fascinating technique for efficient dewatering of digestate. However, the effects of BC/PF treatment on the dewaterability and mechanisms of FWD are still unknown. This study aimed to reveal the impact mechanisms of BC/PF treatment on digestate dewatering performance. Experimental results indicated that BC/PF treatment significantly enhanced the dewaterability of digestate, with the minimum specific resistance to filtration of (1.05 ± 0.02) × 1015 m·kg-1 and water content of 57.52 ± 0.51% being obtained at the concentrations of 0.018 g·g-1 total solid (TS) BC300 and 0.20 g·g-1 TS PF, which were 8.60% and 13.59% lower than PF treatment, respectively. BC/PF treatment proficiently reduced the fractal dimension, bound water content, apparent viscosity, and gel-like network structure strength of digestate, as well as increased the floc size and zeta potential of digestate. BC/PF treatment promoted the conversion of extracellular polymeric substances (EPS) fractions from inner EPS to soluble EPS, increased the fluorescence intensity of the dissolved compounds, and enhanced the hydrophobicity of proteins. Mechanisms investigations showed that BC/PF enhanced dewatering through non-reactive oxygen species pathways, i.e., via strong oxidative intermediate irons species Fe(V)/Fe(IV). BC/PF treatment enhanced the solubilization of nutrients, the inactivation of fecal coliforms, and the mitigation of heavy metal toxicity. The results suggested that BC/PF treatment is an effective digestate dewatering technology which can provide technological supports to the closed-loop treatment of FWD.
Assuntos
Carvão Vegetal , Perda e Desperdício de Alimentos , Compostos de Ferro , Ferro , Compostos de Potássio , Eliminação de Resíduos , Alimentos , Esgotos/química , Água/química , Eliminação de Resíduos Líquidos/métodosRESUMO
Wastewater reuse is one of the crucial water resources in Egypt due to the ongoing need to increase water resources and close the supply-demand gap. In this study, a new coagulant has been investigated before sand filters as an advanced wastewater treatment method. The sand filter pilot was run at a hydraulic loading rate of 0.75 m/h and two different dosages of three coagulants (Alum, FeCl3, and Ferrate VI) were selected using the jar tests. The sand filter without coagulant removed 12% of BOD5 and 70% of turbidity. Applying in-line coagulation before the sand filter provided effluents with better quality, especially for turbidity, organics, and microorganisms. Ferrate provided the highest removal of turbidity (90%) and BOD5 (93%) at very low dosages and lower costs compared with other coagulants, however, it adversely impacted both conductivity and dissolved solids. A significant effect on reducing bacteria was obtained with 40.0 mg/L of alum. According to the study's findings, the ferrate coagulant enhanced the sand filter's performance producing effluents with high quality, enabling it to meet strict water reuse regulations as well as aquatic environmental and health preservations.
Assuntos
Filtração , Ferro , Águas Residuárias , Purificação da Água , Filtração/métodos , Ferro/química , Águas Residuárias/química , Purificação da Água/métodos , Eliminação de Resíduos Líquidos/métodos , Areia/química , Dióxido de Silício/químicaRESUMO
Tetracycline becomes a crucial measure for managing and treating communicable diseases in both human and animal sectors due to its beneficial antibacterial properties and cost-effectiveness. However, it is important not to trivialize the associated concerns of environmental contamination following the antibiotic's application. In this study, cobalt ferrate (CoFe2O4) nanoparticles were loaded into chitosan (CS), which can avoid the agglomeration problem caused by high surface energy and thus improve the catalytic performance of cobalt ferrate. And it can avoid the problem of secondary contamination caused by the massive leaching of metal ions. The resulting product was used as a catalyst to activate peroxymonosulfate (PMS) for the degradation of tetracycline (TC). To determine the potential effects on TC degradation, various factors such as PMS dosing, catalyst dosing, TC concentration, initial solution pH, temperature, and inorganic anions (Cl-, H2PO4- and HCO3-) were investigated. The CS/CoFe2O4/PMS system exhibited superior performance compared to the CoFe2O4-catalyzed PMS system alone, achieving a 92.75% TC removal within 120 min. The catalyst displayed high stability during the recycling process, with the efficiency observed after five uses remaining at a stable 73.1%, and only minor leaching of dissolved metal ions from the catalyst. This confirms the high stability of the catalyst. The activation mechanism study showed that there are free radical and non-free radical pathways in the reaction system to degrade TC together, and SO4â¢- and 1O2 are the primary reactive oxygen radicals involved in the reaction, allowing for effective treatment of contaminated water by TC.
Assuntos
Quitosana , Ferro , Nanocompostos , Animais , Humanos , Tetraciclina , Antibacterianos , Peróxidos , Catálise , CobaltoRESUMO
Manganese ion [Mn(II)] is a background constituent existing in natural waters. Herein, it was found that only 59% of bisphenol A (BPA), 47% of bisphenol F (BPF), 65% of acetaminophen (AAP), and 49% of 4-tert-butylphenol (4-tBP) were oxidized by 20 µM of Fe(VI), while 97% of BPA, 95% of BPF, 96% of AAP, and 94% of 4-tBP could be oxidized by the Fe(VI)/Mn(II) system [20 µM Fe(VI)/20 µM Mn(II)] at pH 7.0. Further investigations showed that bisphenol S (BPS) was highly reactive with reactive iron species (RFeS) but was sluggish with reactive manganese species (RMnS). By using BPS and methyl phenyl sulfoxide (PMSO) as the probe compounds, it was found that reactive iron species contributed primarily for BPA oxidation at low Mn(II)/Fe(VI) molar ratios (below 0.1), while reactive manganese species [Mn(VII)/Mn(III)] contributed increasingly for BPA oxidation with the elevation of the Mn(II)/Fe(VI) molar ratio (from 0.1 to 3.0). In the interaction of Mn(II) and Fe(VI), the transfer of oxidation capacity from Fe(VI) to Mn(III), including the formation of Mn(VII) and the inhibition of Fe(VI) self-decay, improved the amount of electron equivalents per Fe(VI) for BPA oxidation. UV-vis spectra and dominant transformation product analysis further revealed the evolution of iron and manganese species at different Mn(II)/Fe(VI) molar ratios.
Assuntos
Manganês , Poluentes Químicos da Água , Manganês/química , Ferro/química , Oxirredução , Poluentes Químicos da Água/químicaRESUMO
In this work, the oxidation of five phenolic contaminants by ferrate(VI) was comparatively investigated to explore the possible reaction mechanisms by combined experimental results and theoretical calculations. The second-order rate constants were positively correlated with the energy of the highest occupied molecular orbital. Considering electronic effects of different substituents, the easy oxidation of phenols by ferrate(VI) could be ranked as the electron-donating group (-R) > weak electron-withdrawing group (-X) > strong electron-withdrawing group (-(CâO)-). The contributions of reactive species (Fe(VI), Fe(V)/(IV), and â¢OH) were determined, and Fe(VI) was found to dominate the reaction process. Four main reaction mechanisms including single-oxygen transfer (SOT), double-oxygen transfer (DOT), â¢OH attack, and electron-transfer-mediated coupling reaction were proposed for the ferrate(VI) oxidation process. According to density functional theory calculation results, the presence of -(CâO)- was more conducive for the occurrence of DOT and â¢OH attack reactions than -R and -X, while the tendency of SOT for different substituents was -R > -(CâO)- > -X and that of e--transfer reaction was -R > -X > -(CâO)-. Moreover, the DOT pathway was found in the oxidation of all four substituted phenols, indicating that it may be a common reaction mechanism during the ferrate(VI) oxidation of phenolic compounds.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água , Purificação da Água , Cinética , Teoria da Densidade Funcional , Oxirredução , Fenóis , Oxigênio , Purificação da Água/métodosRESUMO
Ferrate (Fe(VI)) is a novel oxidant that can be used to mitigate disinfection byproduct (DBP) precursors. However, the reaction of Fe(VI) with organic nitrogen, which is a potential precursor of potent nitrogenous DBPs, remains largely unexplored. The present work aimed to identify the kinetics and products for the reaction of Fe(VI) with primary amines, notably amino acids. A new kinetic model involving ionizable intermediates was proposed and can describe the unusual pH effect on the Fe(VI) reactivity toward primary amines and amino acids. The Fe(VI) oxidation of phenylalanine produced a mixture of nitrile, nitrite/nitrate, amide, and ammonia, while nitroalkane was an additional product in the case of glycine. The product distribution for amino acids significantly differed from that of uncarboxylated primary amines that mainly generate nitriles. A general reaction pathway for primary amines and amino acids was proposed and notably involved the formation of imines, the degradation of which was affected by the presence of a carboxylic group. In comparison, ozonation led to higher yields of nitroalkanes that could be readily converted to potent halonitroalkanes during chlor(am)ination. Based on this study, Fe(VI) can effectively mitigate primary amine-based, nitrogenous DBP precursors with little formation of toxic halonitroalkanes.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Aminas , Aminoácidos , Oxirredução , Oxidantes/química , Nitrogênio , Cinética , Poluentes Químicos da Água/análiseRESUMO
The increasing presence of antibiotics in water sources threatens public health and ecosystems. Various treatments have been previously applied to degrade antibiotics, yet their efficiency is commonly hindered by the presence of natural organic matter (NOM) in water. On the contrary, we show here that nine types of NOM and NOM model compounds improved the removal of trimethoprim and sulfamethoxazole by ferrate(VI) (FeVIO42-, Fe(VI)) under mild alkaline conditions. This is probably associated with the presence of phenolic moieties in NOMs, as suggested by first-order kinetics using NOM, phenol, and hydroquinone. Electron paramagnetic resonance reveals that NOM radicals are generated within milliseconds in the Fe(VI)-NOM system via single-electron transfer from NOM to Fe(VI) with the formation of Fe(V). The dominance of the Fe(V) reaction with antibiotics resulted in their enhanced removal despite concurrent reactions between Fe(V) and NOM moieties, the radicals, and water. Kinetic modeling considering Fe(V) explains the enhanced kinetics of antibiotics abatement at low phenol concentrations. Experiments with humic and fulvic acids of lake and river waters show similar results, thus supporting the enhanced abatement of antibiotics in real water situations.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Antibacterianos , Ecossistema , Poluentes Químicos da Água/análise , Oxirredução , Fenóis , Água , Fenol , Purificação da Água/métodos , CinéticaRESUMO
Bisphenol B (BPB, 2,2-bis(4-hydroxyphenyl) butane), as a substitute for bisphenol A, has been widely detected in the environment and become a potential threat to environmental health. This work found that silver oxide nanoparticles (Ag2O) could greatly promote the removal of BPB by ferrate (Fe(VI)). With the presence of 463 mg/L Ag2O, the amount of Fe(VI) required for the complete removal of 10 µM BPB will be reduced by 70%. Meanwhile, the recyclability and stability of Ag2O have been verified by recycling experiments. The characterization results and in situ electrochemical analyses showed that Ag(II) was produced from Ag(I) in the Fe(VI)-Ag2O system, which has a higher electrode potential to oxidize BPB to enhance its removal. A total of 13 intermediates were identified by high-resolution mass spectrometry, and three main reaction pathways were proposed, including oxygen transfer, bond breaking, and polymerization. Based on the toxicity assessment through the ECOSAR program, it is considered that the presence of Ag2O reduced the toxicity of BPB oxidation intermediates to aquatic organisms. These results would deepen our understanding of the interaction between Fe(VI) and Ag2O, which may provide an efficient and environmentally friendly method for water and wastewater treatment.
Assuntos
Nanopartículas , Poluentes Químicos da Água , Purificação da Água , Ferro/química , Oxirredução , Poluentes Químicos da Água/toxicidade , Purificação da Água/métodosRESUMO
Previous studies mostly held that the oxidation capacity of ferrate depends on the involvement of intermediate iron species (i.e., FeIV/FeV), however, the potential role of the metastable complex was disregarded in ferrate-based heterogeneous catalytic oxidation processes. Herein, we reported a complexation-mediated electron transfer mechanism in the ferrihydrite-ferrate system toward sulfamethoxazole (SMX) degradation. A synergy between intermediate FeIV/FeV oxidation and the intramolecular electron transfer step was proposed. Specifically, the conversion of phenyl methyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2) suggested that FeIV/FeV was involved in the oxidation of SMX. Moreover, based on the in situ Raman test and chronopotentiometry analysis, the formation of the metastable complex of ferrihydrite/ferrate was found, which possesses higher oxidation potential than free ferrate and could achieve the preliminary oxidation of organics via the electron transfer step. In addition, the amino group of SMX could complex with ferrate, and the resulting metastable complex of ferrihydrite/ferrate would combine further with SMX molecules, leading to intramolecular electron transfer and SMX degradation. The ferrate loss experiments suggested that ferrihydrite could accelerate the decomposition of ferrate. Finally, the effects of pH value, anions, humic acid, and actual water on the degradation of SMX by ferrihydrite-ferrate were also revealed. Overall, ferrihydrite demonstrated high catalytic capacity, good reusability, and nontoxic performance for ferrate activation. The ferrihydrite-ferrate process may be a green and promising method for organic removal in wastewater treatment.
Assuntos
Elétrons , Poluentes Químicos da Água , Ferro/química , Compostos Férricos , Oxirredução , Compostos Orgânicos , Poluentes Químicos da Água/análiseRESUMO
Ferrate (Fe(VI)) is an emerging green disinfectant and has received increasing attention nowadays. This study conducted systematic analyses of Fe(VI) disinfection on six typical bacteria in different water matrices. The results showed that Fe(VI) was more effective in inactivating Gram-negative (G-) bacteria than Gram-positive (G+) bacteria, and the disinfection performance of Fe(VI) was better in a phosphate buffer than that in a borate buffer and secondary effluent. The inactivation rate constants of G- bacteria were significantly higher than those of G+ bacteria. The cell membrane damage of G- bacteria was also more severe than that of G+ bacteria after Fe(VI) treatment. The cell wall structure, especially cell wall thickness, might account for the difference of the inactivation efficiency between G- bacteria and G+ bacteria. Moreover, it is revealed that Fe(VI) primarily reacted with proteins rather than other biological molecules (i.e., phospholipids, peptidoglycan, and lipopolysaccharide). This was further evidenced by the reduction of bacterial autofluorescence due to the destruction of bacterial proteins during Fe(VI) inactivation. Overall, this study advances the understanding of Fe(VI) disinfection mechanisms and provides valuable information for the Fe(VI) application in water disinfection.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Água , Purificação da Água/métodos , Ferro/química , Poluentes Químicos da Água/análise , Bactérias , OxirreduçãoRESUMO
This study explores the formation of bromate (BrO3-) in the copresence of Fe(VI) and bromide (Br-). It challenges previous beliefs about the role of Fe(VI) as a green oxidant and highlights the crucial role of intermediates Fe(V) and Fe(IV) in the conversion of Br- to BrO3-. The results show that the maximum concentration of BrO3- of 48.3 µg/L was obtained at 16 mg/L Br- and that the contribution of Fe(V)/Fe(IV) to the conversion was positively related to pH. The study suggests that a single-electron transfer from Br- to Fe(V)/Fe(IV) along with the generation of reactive bromine radicals is the first step of Br- conversion, followed by the formation of OBr- which was then oxidized to BrO3- by Fe(VI) and Fe(V)/Fe(IV). Some common background water constituents (e.g., DOM, HCO3-, and Cl-) significantly inhibited BrO3- formation by consuming Fe(V)/Fe(IV) and/or scavenging the reactive bromine species. While investigations proposing to promote Fe(V)/Fe(IV) formation in Fe(VI)-based oxidation to enhance its oxidation capacity have been rapidly accumulated recently, this work called attention to the considerable formation of BrO3- in this process.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Brometos , Bromo , Bromatos , Poluentes Químicos da Água/análise , Purificação da Água/métodos , OxirreduçãoRESUMO
Difficulties arise related to the economy-of-scale and practicability in applying conventional water treatment technologies to small and remote systems. A promising oxidation technology better suited for these applications is that of electro-oxidation (EO), whereby contaminants are degraded via direct, advanced, and/or electrosynthesized oxidant-mediated reactions. One species of oxidants of particular interest includes ferrates (Fe(VI)/(V)/(IV)), where only recently has their circumneutral synthesis been demonstrated, using high oxygen overpotential (HOP) electrodes, namely boron-doped diamond (BDD). In this study, the generation of ferrates using various HOP electrodes (BDD, NAT/Ni-Sb-SnO2, and AT/Sb-SnO2) was investigated. Ferrate synthesis was pursued in a current density range of 5-15 mA cm-2 and initial Fe3+ concentrations of 10-15 mM. Faradaic efficiencies ranged from 11-23%, depending on operating conditions, with BDD and NAT significantly outperforming AT electrodes. Speciation tests revealed that NAT synthesizes both ferrate(IV/V) and ferrate(VI), while the BDD and AT electrodes synthesized only ferrate(IV/V) species. A number of organic scavenger probes were used to test the relative reactivity, including nitrobenzene, carbamazepine, and fluconazole, whereby ferrate(IV/V) was significantly more oxidative than ferrate(VI). Finally, the ferrate(VI) synthesis mechanism by NAT electrolysis was elucidated, where coproduction of ozone was found to be a key phenomenon for Fe3+ oxidation to ferrate(VI).
Assuntos
Poluentes Químicos da Água , Purificação da Água , Poluentes Químicos da Água/análise , Ferro , Oxirredução , Oxidantes , Estresse OxidativoRESUMO
The remediation of cadmium (Cd) contaminated soil is challenging for agricultural practices. In this study, a novel vinasse biochar modified by potassium ferrate (K2FeO4) was synthesized to immobilize Cd in agricultural soil. Three biochars [i.e., vinasse biochar (BC), KMnO4 modified vinasse biochar (MnBC), and K2FeO4 modified vinasse biochar (FeBC)] were applied to compare their efficiencies of Cd immobilization. The results showed that the orders of pH, ash content, and functional groups in different biochar were the same following BC < MnBC < FeBC. Scanning electron microscope images showed that the FeBC has more micropores than MnBC and BC. X-ray diffraction identified manganese oxides and iron oxides within MnBC and FeBC, indicating that Mn and Fe were well loaded on the biochar. In the soil-based pot experiment, both MnBC and FeBC significantly reduced soil available Cd by 23-38% and 36-45% compared with the control, respectively (p < 0.05). In addition, the application of BC, MnBC, and FeBC significantly increased the yield, chlorophyll, and vitamin C of Chinese cabbage (p < 0.05), and decreased its Cd uptake compared with the control. Notably, shoot Cd significantly reduced when 2% FeBC was applied (p < 0.05). Overall, using K2FeO4 to modify vinasse biochar enriched the surface functional groups and minerals as well as reduced Cd availability in soil and its uptake by the plant. Our study showed that K2FeO4 modified vinasse biochar could be used as an ideal amendment for the remediation of Cd-contaminated soil.
RESUMO
The apparent second-order rate constant with hexavalent ferrate (Fe(VI)) (kFe(VI)) is a key indicator to evaluate the removal efficiency of a molecule by Fe(VI) oxidation. kFe(VI) is often determined by experiment, but such measurements can hardly catch up with the rapid growth of organic compounds (OCs). To address this issue, in this study, a total of 437 experimental second-order kFe(VI) rate constants at a range of conditions (pH and temperature) were used to train four machine learning (ML) algorithms (lasso regression (LR), ridge regression (RR), extreme gradient boosting (XGBoost), and the light gradient boosting machine (LightGBM)). Using the Morgan fingerprint (MF)) of a range of organic compounds (OCs) as the input, the performance of the four algorithms was comprehensively compared with respect to the coefficient of determination (R2) and root-mean-square error (RMSE). It is shown that the RR, XGBoost, and LightGBM models displayed generally acceptable performance kFe(VI) (R2test > 0.7). In addition, the shapely additive explanation (SHAP) and feature importance methods were employed to interpret the XGBoost/LightGBM and RR models, respectively. The results showed that the XGBoost/LightGBM and RR models suggestd pH as the most important predictor and the tree-based models elucidate how electron-donating and electron-withdrawing groups influence the reactivity of the Fe(VI) species. In addition, the RR model share eight common features, including pH, with the two tree-based models. This work provides a fast and acceptable method for predicting kFe(VI) values and can help researchers better understand the degradation behavior of OCs by Fe(VI) oxidation from the perspective of molecular structure.