The Strength and Fire Properties of Paper Sheets Made of Phosphorylated Cellulose Fibers.

Phosphorylated cellulose can be an intrinsic flame retardant and a promising alternative for halogenated fire inhibitors. In this study, the mixture of di-ammonium hydrogen phosphate (DAP) and urea (U), containing phosphate and nitrogen groups, was applied to attain fire inhibitor properties. Functional groups of cellulose were grafted with phosphorous by keeping the constant molar ratio of 1/1.2/4.9 between anhydroglucose units of cellulose/DAP/U in different concentrations of bleached kraft pulp. Phosphorus concentrations were determined using the ICP hrOES method, and paper sheets were made using the Rapid Köthen apparatus. The tensile strength of phosphorylated cellulose increased twice compared with unmodified cellulose when the phosphorous concentration increased to 10,000 g/kg. An increase in the tensile index comes from the higher freeness of pulp and cross-linking of the phosphorous group between cellulose fibers. Remarkable fire retardancy effects were achieved in cellulose concentrations above 5 wt%. The raised phosphorous concentration above 10,000 g/kg due to the phosphorylation process caused the formation of a char layer on a cellulose surface and the nonflammable gas emission. That effect was indirectly confirmed by reducing the combustion temperature and HRR by 50 and 45%, respectively. Due to increasing phosphorus concentration in cellulose sheets, cellulose's fire and strength properties increased significantly.

Possible land management uses of common cypress to reduce wildfire initiation risk: a laboratory study.

Accurate determination of flammability is required in order to improve knowledge about vegetation fire risk. Study of the flammability of different plant species is essential for the Mediterranean area, where most ecosystems are adapted to natural fire but vulnerable to recurrent human-induced fires, which are the main cause of forest degradation. However, the methods used to evaluate vegetation flammability have not yet been standardized. Cupressus sempervirens is a native or naturalized forest tree species in the Mediterranean area that is able to tolerate prolonged drought and high temperatures. The aim of this study was to characterize the flammability of C. sempervirens var. horizontalis at particle level by using different bench-scale calorimetry techniques (mass loss calorimeter, epiradiator and oxygen bomb) to determine the main flammability descriptors (ignitability, sustainability, combustibility and consumability) in live crown and litter samples. Our findings indicate that this variety of cypress is relatively resistant to ignition because of the high ash content, the high critical heat flux, the high time to ignition displayed by both crown and litter samples and the ability of the leaves to maintain a high water content during the summer. We also discuss the possibility of exploiting some morphological, functional and ecological traits of the species to construct a barrier system (with selected varieties of cypress) as a promising complementary land management tool to reduce the fire spread and intensity in a Mediterranean context.

Fire Properties of Paper Sheets Made of Cellulose Fibers Treated with Various Retardants.

This article presents the results of flame-retardancy tests conducted on cellulose sheets produced using a Rapid Köthen apparatus treated with retardants. The agents used were potassium carbonate (PC) K2CO3 (concentrations of 20; 33.3; and 50% wt/wt), monoammonium phosphate (MAP) NH4H2PO4 (concentrations of 35% wt/wt), diammonium phosphate (DAP) (NH4)2HPO4 (concentrations of 42.9% wt/wt), and bisguanidal phosphate (FOS) C2H10N6 (concentrations of 22.5% wt/wt). The agents were used to improve Kraft cellulose-based sheets' flame-retardant properties and compare their performances. As part of the study, the flammability of the materials was determined by the following methods: an oxygen index (OI) test, a mass loss calorimeter (MLC) test, and a mini fire tube (MFT) test. All formulations showed an increase in flame retardancy compared to the control test. All protected samples were non-flammable for OI determinations, and DAP-protected samples showed the highest OI index. For the MLC test, DAP-protected and MAP-protected samples showed the best heat-release rate (HRR), total heat release (THR), and average heat-release rate (ARHE) (samples did not ignite for 600 s). In the MFT test, all treated samples had comparably reduced weight loss. The best parameter was achieved for MAP and DAP (15% weight loss).

Do cone age and heating mode determine the opening of serotinous cones during wildfires? A new bench scale approach applied to Pinus halepensis Mill.

Serotiny is a well-known fire adaptive trait in some species, as the Mediterranean conifer Pinus halepensis. However, information about cone opening mechanisms during wildfires and consequences on post fire dispersal is scarce. In addition, standardized methods allowing a realistic simulation of heating modes at bench-scale are not available. In this study, we address for the first time the interacting effects of radiation, convection and direct flame on the opening and seed release of serotinous cones, following a novel repeatable methodology. Using a Mass Loss Calorimeter (MLC) device and a wide range of heat exposures (between 5 and 75 kW m-2) with or without ignition, we intended to simulate realistic cone heating during surface and crown fires in laboratory conditions. Additionally, we included the effect of contrasting serotinous cone ages interacting with heating mode and considering the random individual variation. The proposed methodology has shown a high potential to simulate the complex process of crown fires in relation to cone opening under controlled conditions, detecting a threshold of heat exposure (25-30 kW m-2) for cone opening. We confirmed that heating mode had a highly significant effect in cone opening, interacting with cone age, while cone age effect on its own was marginal. Particularly, ignition significantly increased the efficacy of cone opening and seed release. Moreover, young and old cones behave differently in seed release, both in surface and crown fire simulations. Implementing and adjusting this methodology in other species will allow more realistic and reliable quantitative comparisons than previously attained.