Neq2X7: a multi-purpose and open-source fusion DNA polymerase for advanced DNA engineering and diagnostics PCR.

Thermostable DNA polymerases, such as Taq isolated from the thermophilic bacterium Thermus aquaticus, enable one-pot exponential DNA amplification known as polymerase chain reaction (PCR). However, properties other than thermostability - such as fidelity, processivity, and compatibility with modified nucleotides - are important in contemporary molecular biology applications. Here, we describe the engineering and characterization of a fusion between a DNA polymerase identified in the marine archaea Nanoarchaeum equitans and a DNA binding domain from the thermophile Sulfolobus solfataricus. The fusion creates a highly active enzyme, Neq2X7, capable of amplifying long and GC-rich DNA, unaffected by replacing dTTP with dUTP in PCR, and tolerant to various known PCR inhibitors. This makes it an attractive DNA polymerase for use, e.g., with uracil excision (USER) DNA assembly and for contamination-free diagnostics. Using a magnification via nucleotide imbalance fidelity assay, Neq2X7 was estimated to have an error rate lower than 2 ∙ 10-5 bp-1 and an approximately 100x lower fidelity than the parental variant Neq2X, indicating a trade-off between fidelity and processivity - an observation that may be of importance for similarly engineered DNA polymerases. Neq2X7 is easy to produce for routine application in any molecular biology laboratory, and the expression plasmid is made freely available.

Quantification of modified nucleotides and nucleosides by isotope dilution mass spectrometry.

Epigenetic modifications are closely related to certain disorders of the organism, including the development of tumors. One of the main epigenetic modifications is the methylation of DNA cytosines, 5-methyl-2'-deoxycycytidine. Furthermore, 5-mdC can be oxidized to form three new modifications, 5-(hydroxymethyl)-2'-deoxycytidine, 5-formyl-2'-deoxycytidine, and 5-carboxy-2'-deoxycytidine. The coupling of liquid chromatography with tandem mass spectrometry has been widely used for the total determination of methylated DNA cytosines in samples of biological and clinical interest. These methods are based on the measurement of the free compounds (e.g., urine) or after complete hydrolysis of the DNA (e.g., tissues) followed by a preconcentration, derivatization, and/or clean-up step. This review highlights the main advances in the quantification of modified nucleotides and nucleosides by isotope dilution using isotopically labeled analogs combined with liquid or gas chromatography coupled to mass spectrometry reported in the last 20 years. The different possible sources of labeled compounds are indicated. Special emphasis has been placed on the different types of chromatography commonly used (reverse phase and hydrophilic interaction liquid chromatography) and the derivatization methods developed to enhance chromatographic resolution and ionization efficiency. We have also revised the application of bidimensional chromatography and indicated significant biological and clinical applications of these determinations.

2',3'-Protected Nucleotides as Building Blocks for Enzymatic de novo RNA Synthesis.

Besides being a key player in numerous fundamental biological processes, RNA also represents a versatile platform for the creation of therapeutic agents and efficient vaccines. The production of RNA oligonucleotides, especially those decorated with chemical modifications, cannot meet the exponential demand. Due to the inherent limits of solid-phase synthesis and in vitro transcription, alternative, biocatalytic approaches are in dire need to facilitate the production of RNA oligonucleotides. Here, we present a first step towards the controlled enzymatic synthesis of RNA oligonucleotides. We have explored the possibility of a simple protection step of the vicinal cis-diol moiety to temporarily block ribonucleotides. We demonstrate that pyrimidine nucleotides protected with acetals, particularly 2',3'-O-isopropylidene, are well-tolerated by the template-independent RNA polymerase PUP (polyU polymerase) and highly efficient coupling reactions can be achieved within minutes - an important feature for the development of enzymatic de novo synthesis protocols. Even though purines are not equally well-tolerated, these findings clearly demonstrate the possibility of using cis-diol-protected ribonucleotides combined with template-independent polymerases for the stepwise construction of RNA oligonucleotides.

Modified nucleotides may have enhanced early RNA catalysis.

The modern version of the RNA World Hypothesis begins with activated ribonucleotides condensing (nonenzymatically) to make RNA molecules, some of which possess (perhaps slight) catalytic activity. We propose that noncanonical ribonucleotides, which would have been inevitable under prebiotic conditions, might decrease the RNA length required to have useful catalytic function by allowing short RNAs to possess a more versatile collection of folded motifs. We argue that modified versions of the standard bases, some with features that resemble cofactors, could have facilitated that first moment in which early RNA molecules with catalytic capability began their evolutionary path toward self-replication.

mRNA Vaccine Platform: mRNA Production and Delivery.

Vaccination is the most efficient way to prevent infectious diseases. mRNA-based vaccines is a new approach to vaccine development, which have several very useful advantages over other types of vaccines. Since mRNA encodes only the target antigen there is no potential risk of infection as in the case with attenuated or inactivated pathogens. The mode of action of mRNA-vaccines implies that their genetic information is expressed only in the cytosol, leaving very little possibility of mRNA integration into the host's genome. mRNA-vaccines can induce specific cellular and humoral immune responses, but do not induce the antivector immune response. The mRNA-vaccine platform allows for easy target gene replacement without the need to change the production technology, which is important to address the time lag between the epidemic onset and vaccine release. The present review discusses the history of mRNA vaccines, mRNA vaccine production technology, ways to increase mRNA stability, modifications of the cap, poly(A)-tail, coding and noncoding parts of mRNA, target mRNA vaccine purification from byproducts, and delivery methods.

Sensitive and accurate analysis of gene expression signatures enabled by oligonucleotide-labelled cDNA.

High-throughput RNA sequencing offers a comprehensive analysis of transcriptome complexity originated from regulatory events, such as differential gene expression, alternative polyadenylation and others, and allows the increase in diagnostic capacity and precision. For gene expression profiling applications that do not specifically require information on alternative splicing events, the mRNA 3' termini counting approach is a cost-effective alternative to whole transcriptome sequencing. Here, we report MTAS-seq (mRNA sequencing via terminator-assisted synthesis) - a novel RNA-seq library preparation method directed towards mRNA 3' termini. We demonstrate the specific enrichment for 3'-terminal regions by simple and quick single-tube protocol with built-in molecular barcoding to enable accurate estimation of transcript abundance. To achieve that, we synthesized oligonucleotide-modified dideoxynucleotides which enable the generation of cDNA libraries at the reverse transcription step. We validated the performance of MTAS-seq on well-characterized reference bulk RNA and further tested it with eukaryotic cell lysates.

mRNA structure regulates protein expression through changes in functional half-life.

Messenger RNAs (mRNAs) encode information in both their primary sequence and their higher order structure. The independent contributions of factors like codon usage and secondary structure to regulating protein expression are difficult to establish as they are often highly correlated in endogenous sequences. Here, we used 2 approaches, global inclusion of modified nucleotides and rational sequence design of exogenously delivered constructs, to understand the role of mRNA secondary structure independent from codon usage. Unexpectedly, highly expressed mRNAs contained a highly structured coding sequence (CDS). Modified nucleotides that stabilize mRNA secondary structure enabled high expression across a wide variety of primary sequences. Using a set of eGFP mRNAs with independently altered codon usage and CDS structure, we find that the structure of the CDS regulates protein expression through changes in functional mRNA half-life (i.e., mRNA being actively translated). This work highlights an underappreciated role of mRNA secondary structure in the regulation of mRNA stability.

[Study of Multiple Enzymatic Incorporation of Modified Nucleotides of Purine and Pyrimidine Nature in the Growing DNA Chain].

The substrate properties of nitrogen-base modified derivatives of purine and pyrimidine deoxynucleoside triphosphates during their simultaneous pairwise insertion into the growing DNA strand have been studied. Modified nucleotides were introduced using real-time PCR and the primer extension reaction; in one reaction, derivatives with both different and similar functional substituents were used. Genomic bacterial DNA, specially constructed synthetic DNA fragments, and SELEX libraries were used as templates. The reactions were performed using DNA polymerases with no 3'-5' correcting exonuclease activity: Taq, Vent (exo-), DeepVent (exo-), and KOD XL. It was shown that the substrate efficiency is affected by both the size of the substituent group and the chemical nature of deoxynucleoside triphosphate. The effectiveness varies significantly depending on the polymerase used. The most effective of the studied substrates are pyrimidine deoxynucleoside triphosphates in combination with Vent (exo-) DNA polymerase. DNAs modified by pairs of dissimilar nucleotides (dU + dC, dU + dA, dC + dA) with similar and different functional substituents were obtained.

Profiling of the ADP-Ribosylome in Living Cells.

Post-translational modification (PTM) with ADP-ribose and poly(ADP-ribose) using nicotinamide adenine dinucleotide (NAD+ ) as substrate is involved in the regulation of numerous cellular pathways in eukaryotes, notably the response to DNA damage caused by cellular stress. Nevertheless, due to intrinsic properties of NAD+ e.g., high polarity and associated poor cell passage, these PTMs are difficult to characterize in cells. Here, two new NAD+ derivatives are presented, which carry either a fluorophore or an affinity tag and, in combination with developed methods for mild cell delivery, allow studies in living human cells. We show that this approach allows not only the imaging of ADP-ribosylation in living cells but also the proteome-wide analysis of cellular adaptation by protein ADP-ribosylation as a consequence of environmental changes such as H2 O2 -induced oxidative stress or the effect of the approved anti-cancer drug olaparib. Our results therefore pave the way for further functional and clinical studies of the ADP-ribosylated proteome in living cells in health and disease.

Towards the enzymatic synthesis of phosphorothioate containing LNA oligonucleotides.

Therapeutic oligonucleotides require the addition of multiple chemical modifications to the nucleosidic scaffold in order to improve their drug delivery efficiency, cell penetration capacity, biological stability, and pharmacokinetic properties. This chemical modification pattern is often accompanied by a synthetic burden and by limitations in sequence length. Here, we have synthesized a nucleoside triphosphate analog bearing two simultaneous modifications at the level of the sugar (LNA) and the backbone (thiophosphate) and have tested its compatibility with enzymatic DNA synthesis which could abrogate some of these synthetic limitations. While this novel analog is not as well tolerated by polymerases compared to the corresponding α-thio-dTTP or LNA-TTP, α -thio-LNA-TTP can readily be used for enzymatic synthesis on universal templates for the introduction of phosphorothioated LNA nucleotides.

Rolling circle amplification with fluorescently labeled dUTP-balancing the yield and degree of labeling.

Detection methods based on rolling circle amplification (RCA) have been applied to a large number of targets in molecular biology. The key feature of RCA-based methods as well as other nucleic acid amplification methods is their exceptional sensitivity, which allows the detection of molecules at low concentrations, achieved by signal amplification due to nucleic acid magnification and subsequent detection. Variations on the method, such as immuno-RCA, extend the range of potential targets that can be detected. Employing fluorescently labeled nucleotides for direct incorporation into an amplification product is an attractive method for RCA product detection. However, the effectiveness of this approach remains doubtful. In our study, we utilized different modified dUTPs, including sulfo-cyanine3-dUTP, sulfo-cyanine5-dUTP, sulfo-cyanine5.5-dUTP, BDP-FL-dUTP, and amino-11-dUTP, to investigate whether the properties of the fluorophore used for modification affected the reaction yield and effectiveness of incorporation of nucleotide analogs by phi29 DNA polymerase. Among the modified dUTPs, sulfo-cyanine3-dUTP demonstrated the highest incorporation effectiveness, equal to 4-9 labels per 1000 nucleotides. The mean length of the RCA product was estimated to be approximately 175,000 nucleotides. The total increase in fluorescence from a single target/product complex was 850 times. The results obtained in the study illustrate the possibility of successful application of nucleotide analogs for RCA detection and present quantitative characteristics of fluorescently labeled dUTPs to be incorporated into RCA products.

Long Non-Coding RNA Epigenetics.

Long noncoding RNAs exceeding a length of 200 nucleotides play an important role in ensuring cell functions and proper organism development by interacting with cellular compounds such as miRNA, mRNA, DNA and proteins. However, there is an additional level of lncRNA regulation, called lncRNA epigenetics, in gene expression control. In this review, we describe the most common modified nucleosides found in lncRNA, 6-methyladenosine, 5-methylcytidine, pseudouridine and inosine. The biosynthetic pathways of these nucleosides modified by the writer, eraser and reader enzymes are important to understanding these processes. The characteristics of the individual methylases, pseudouridine synthases and adenine-inosine editing enzymes and the methods of lncRNA epigenetics for the detection of modified nucleosides, as well as the advantages and disadvantages of these methods, are discussed in detail. The final sections are devoted to the role of modifications in the most abundant lncRNAs and their functions in pathogenic processes.

Analysis of Modified Nucleotide Aptamer Library Generated by Thermophilic DNA Polymerases.

One of the pivotal steps in aptamer selection is the amplification of target-specific oligonucleotides by thermophilic DNA polymerases; it can be a challenging task if nucleic acids possessing modified nucleotides are to be amplified. Hence, the identification of compatible DNA polymerase and modified nucleotide pairs is necessary for effective selection of aptamers with unnatural nucleotides. We present an in-depth study of using 5-indolyl-AA-dUTP (TAdUTP) to generate oligonucleotide libraries for aptamer selection. We found that, among the eight studied DNA polymerases, only Vent(exo-) and KOD XL are capable of adapting TAdUTP, and that replacing dTTP did not have a significant effect on the productivity of KOD XL. We demonstrated that water-in-oil emulsion PCR is suitable for the generation of aptamer libraries of modified nucleotides. Finally, high-throughput sequence analysis showed that neither the error rate nor the PCR bias was significantly affected by using TAdUTP. In summary, we propose that KOD XL and TAdUTP could be effectively used for aptamer selection without distorting the sequence space of random oligonucleotide libraries.

Chemical methods for the modification of RNA.

RNA is often considered as being the vector for the transmission of genetic information from DNA to the protein synthesis machinery. However, besides translation RNA participates in a broad variety of fundamental biological roles such as gene expression and regulation, protein synthesis, and even catalysis of chemical reactions. This variety of function combined with intricate three-dimensional structures and the discovery of over 100 chemical modifications in natural RNAs require chemical methods for the modification of RNAs in order to investigate their mechanism, location, and exact biological roles. In addition, numerous RNA-based tools such as ribozymes, aptamers, or therapeutic oligonucleotides require the presence of additional chemical functionalities to strengthen the nucleosidic backbone against degradation or enhance the desired catalytic or binding properties. Herein, the two main methods for the chemical modification of RNA are presented: solid-phase synthesis using phosphoramidite precursors and the enzymatic polymerization of nucleoside triphosphates. The different synthetic and biochemical steps required for each method are carefully described and recent examples of practical applications based on these two methods are discussed.

[Enzymatic Preparation of Modified DNA: Study of the Kinetics by Real-Time PCR].

The effects of modified deoxyuridine triphosphates (mod-dUTPs) with different substituents at the C5 position of the pyrimidine cycle on the kinetics of PCR with Taq and Vent (exo-) DNA polymerases are studied. Substituents in mod-dUTP include carboxamide group and groups that are part of the side chains of alanine, valine, leucine, phenylalanine, tryptophan, or tyrosine. For each mod-dUTP, the yields of the target product are measured with the full substitution of dTTP. A fragment of bacterial DNA with a certain nucleotide sequence and a synthetic combinatorial DNA library of random nucleotide sequences are used as templates for amplification. For each mod-dUTP-template-polymerase combination, the correlation between the amplification efficiencies and yields of the target product are investigated. PCR product accumulation curves are influenced by both the template used and the presence of a modified substrate. The catalytic activity of Taq polymerase is higher when mod-dUTPs with short aliphatic substituents are used and decreases when the derivatives with long aliphatic, phenyl, and indole substituents are utilized. Vent (exo-) polymerase is less sensitive to the chemical structure of mod-dUTP. The dynamic measuring of DNA accumulation may be useful for optimizing the temperature-time PCR profiles individually for each of the mod-dUTP. The derivatives may be used in combination with Vent (exo-) polymerase to obtain modified DNA sequences for the method of selection of modified aptamers (mod-SELEX).

The Structure of an Archaeal B-Family DNA Polymerase in Complex with a Chemically Modified Nucleotide.

Archaeal B-family DNA polymerases (DNA pols) are the driving force of cutting-edge biotechnological applications like next-generation sequencing. The acceptance of chemically modified nucleotides by DNA pols is key to these technologies. Until now, no structural data have been available for these DNA pols in complex with modified substrates, which could build the basis for understanding interactions between the enzyme and the chemically modified nucleotide and for the further development of next-generation nucleotides. For the first time, we crystallized an exonuclease-deficient variant of the wild-type B-family KOD DNA pol with a modified nucleotide in a closed, ternary complex. We also crystalized the A-family DNA pol KlenTaq with the same nucleotide. The reported structural data reveal how the protein and the DNA modulate two distinct conformations of the appended moiety in the A- and B-family DNA pols and how these influence the processing of the modified nucleotide. Overall, this study provides first insight into the interplay between B-family DNA pols and relevant modified substrates.

Shaping Rolling Circle Amplification Products into DNA Nanoparticles by Incorporation of Modified Nucleotides and Their Application to In Vitro and In Vivo Delivery of a Photosensitizer.

Rolling circle amplification (RCA) is a robust way to generate DNA constructs, which are promising materials for biomedical applications including drug delivery because of their high biocompatibility. To be employed as a drug delivery platform, however, the DNA materials produced by RCA need to be shaped into nanoparticles that display both high cellular uptake efficiency and nuclease resistance. Here, we showed that the DNA nanoparticles (DNPs) can be prepared with RCA and modified nucleotides that have side-chains appended on the nucleobase are capable of interacting with the DNA strands of the resulting RCA products. The incorporation of the modified nucleotides improved cellular uptake efficiency and nuclease resistance of the DNPs. We also demonstrated that these DNPs could be employed as carriers for the delivery of a photosensitizer into cancer cells to achieve photodynamic therapy upon irradiation at both the in vitro and in vivo levels.

[Preparation of Modified Combinatorial DNA Libraries via Emulsion PCR with Subsequent Strand Separation].

A modification of the enzymatic method for the preparation of combinatorial random DNA libraries, which combines amplification in isolated microvolumes with the simultaneous incorporation of modified nucleotides and subsequent separation of DNA strands, was developed. Deoxyuridine triphosphate with hydrophobic substituents such as structural analogues of amino acid side chains in the C5 position of the pyrimidine ring was used to introduce modifications into DNA. To prevent competitive amplification, which reduces the representativeness of combinatorial libraries, PCR in inverse emulsion was used. The separation of the strands of PCR products was carried out. There were six single-stranded DNA libraries with complete substitution of deoxythymidine via modified analogues with various functional groups. These DNA libraries are suitable for generating aptamers to protein targets through additional hydrophobic interactions from the introductions of appropriate modifications, and are completely compatible with the SELEX aptamer selection methodology.

[Substrate Properties of New Fluorescently Labeled Deoxycytidine Triphosphates in Enzymatic Synthesis of DNA with Polymerases of Families A and B].

The efficiency of the incorporation of fluorescently labeled derivatives of 2'-deoxycytidine in DNA synthesized de novo has been studied using PCR with Taq and Tth polymerases of family A and Vent (exo-) and Deep Vent (exo-) polymerases of family B. Four derivatives of 5'-triphosphate-2'-deoxycytidine (dCTP) have different chemical structures of the indodicarbocyanine dye and Cy5 analogue attached to position 5 of cytosine. The kinetics of the accumulation of the PCR products and the intensity of the fluorescent signals in the hybridization analysis with immobilized DNA probes depend on the modification of the fluorescently labeled dCTP counterpart, its concentration, and the type of DNA polymerase. All labeled triphosphates showed some inhibitory effects on PCR. The best balance between the efficiency of incorporating labeled cytidine derivatives and the negative effect on the PCR kinetics has been shown in the case of Hot Taq polymerase in combination with the Cy5-dCTP analogue, which contains containing electrically neutral chro-mophore, the axis of which is a continuation of the linker between the chromophore and the pyrimidine base.

In vitro RNA SELEX for the generation of chemically-optimized therapeutic RNA drugs.

Aptamers are single-stranded DNA or RNA oligonucleotides that can bind with exquisitely high affinity and specificity to target molecules and are thus often referred to as 'nucleic acid' antibodies. Oligonucleotide aptamers are derived through a process of directed chemical evolution called SELEX (Systematic Evolution of Ligands by Exponential enrichment). This chemical equivalent of Darwinian evolution was first described in 1990 by Tuerk & Gold and Ellington & Szostak and has since yielded aptamers for a wide-range of applications, including biosensor technologies, in vitro diagnostics, biomarker discovery, and therapeutics. Since the inception of the original SELEX method, numerous modifications to the protocol have been described to fit the choice of target, specific conditions or applications. Technologies such as high-throughput sequencing methods and microfluidics have also been adapted for SELEX. In this chapter, we outline key steps in the SELEX process for enabling the rapid identification of RNA aptamers for in vivo applications. Specifically, we provide a detailed protocol for the selection of chemically-optimized RNA aptamers using the original in vitro SELEX methodology. In addition, methods for performing next-generation sequencing of the RNAs from each round of selection, based on Illumina sequencing technology, are discussed.