Improving anion sensing ability of the indolocarbazole-based fluorescence turn-on sensor by increasing salicylaldehyde response unit.

Detection abilities on tested subjects of sensors should be closely connected to the sensing unit numbers. Herein, two anion sensors ICZ-o-1S and ICZ-o-2S were synthesized by using indolo (2,3-a) carbazoles as fluorescent chromophore and salicylaldehyde as recognition site. Though UV-Vis and fluorescent ways, it demonstrated that F- can induce the sensor solutions becoming colored from colorless to yellow green, and can endow them with bright green turn-on fluorescence, proving their sensitive and selective sensing on F-. Accordingly, the F ion sensing studies including anti-interference abilities against to other anions on fluorescence response, stoichiometric ratios of sensor-F- in 1 : 1 and 1 : 2, -OH deprotonation sensing mechanism confirmed by 1H NMR titration and theoretical calculation were fully covered. Most importantly, fluoride ion detection limits achieved by ICZ-o-1S and ICZ-o-2S were 1.8 × 10-7 M and 6.0 × 10-8 M, respectively, the latter with two sensing units exhibited 3 times lower detection limit outcompeted to the former with only one sensing unit, rendering the sensor design strategy of improving detecting ability by increasing sensing unit number was rational. The practical application of F- detection in water-containing environment calibrated from the standard curve between the fluorescence intensity of sensor-F- system and the changing F- concentration was conducted. In addition, the accuracy of the sensor on detecting F- was evaluated by the spiked recovery experiment, therefore, the fast and convenient F- concentration detection based on the fluorescence color RGB values of the tested sensor-sample mixture was investigated. Consequently, the results obtained by these two sensors should deliver effective supports on designing high-performance sensors featuring naked-eye and fluorescence turn-on anion sensing by altering the response unit numbers.

Boosting Solid-State Luminescence of Thiazolothiazole Viologen by Incorporating Metal Halide Clusters to Hinder π-Stacking.

A new strategy is developed herein to improve the solid fluorescence of thiazolothiazole viologen by using the ZnCl42- cluster as a scaffold to hinder π-stacking. Importantly, the Cl···H bonds are formed in the solid state to sustain the framework and can be automatically dissociated when dissolved in H2O, thus having no impact on the strong emission in aqueous solution. As such, the first case of organic-inorganic viologen-zinc halide named 4PV·ZnCl4 was designed and synthesized, and a significant increase in photoluminescence quantum yield (ΦF) is realized from 4PV·2Br (ΦF = 0%) to 4PV·ZnCl4 (ΦF = 27.0%) in solid and from 97% to 98% in H2O. 4PV·ZnCl4 also displays pH stimuli-responsive naked-eye chromic behavior and photoluminescence with different coloring states and intensities. The multifunctional performance of 4PV·ZnCl4 provides a prerequisite for carrying different information, expanding their promising application in multilevel information encryption.

A simple "turn-on" fluorescent probe capable of recognition cysteine with rapid response and high sensing in living cells and zebrafish.

Cysteine (Cys), an essential biological amino acid, participates several crucial functions in various physiological and pathological processes. The sensitive and specific detection of Cys is of great significance for understanding its biological function to disease diagnosis. Herein, we designed and synthesized a simple fluorescence sensor 2-(benzothiophen-2-yl)-4-oxo-4H-chromen-3-yl acrylate (BTCA) composed of a flavonol skeleton as the fluorophore and acrylic ester group as the recognition receptor. Probe BTCA displayed high selectivity and extremely fast response toward Cys in phosphate buffer solution in the presence of other competitive species even Homocysteine (Hcy) and Glutathione (GSH) owing to a specific conjugate addition-cyclization reaction between the acrylate moiety and Cys. The photoluminescence mechanism of probe BTCA toward Cys was modulated by excited state intramolecular proton transfer (ESIPT) process. The sensing property for Cys was studied by UV-Visible, fluorescence spectrophotometric analyses and time-dependent density functional theory (TD-DFT) calculations, those results indicated that probe BTCA possessed excellent sensitivity, higher specificity, dramatically "naked-eye" fluorescence enhancement (30-fold), high anti-interference ability, especially immediate response speed (within 40 s). Additionally, the practicability of sensor BTCA in exogenous and endogenous Cys imaging in living cells and zebrafish was elucidated as well, suggesting that it has remarkedly diagnostic significance in physiological and pathological process.

Long wavelength emission fluorescent probe for highly selective detection of cysteine in living cells.

We developed a fluorescent probe, named 2-(4-(acryloyloxy) phenyl)-4-(2-carboxyphenyl)-7-(diethylamino) chromenylium (PA-A), for detecting Cys using the -OH protection/deprotection strategy, which can react with Cys to form a red-emitting anthocyanidin derivative fluorophore. The probe has high selectivity to Cys over Hcy and GSH in phosphate buffer solution (PBS, 10 mM, pH = 7.4), high sensitivity, a low detection limit of 4.48 × 10-8 mol/L, and it can be recognized with the naked eye. Fluorescence imaging experiment of Cys with PA-A at the cellular successfully showed excellent tissue penetration.

A novel chemosensor for the distinguishable detections of Cu2+ and Hg2+ by off-on fluorescence and ratiometric UV-visible absorption.

A novel dual-functional chemosensor, derived from the conjugation of rhodamine B with a quinoline derivative (RHQ), was firstly synthesized with high efficiency and cost-effectiveness for the distinguishable detections of Cu2+ and Hg2+ via ring-opening and ring-forming mechanism. The chemosensor exhibits highly selective and distinguishable responses for Cu2+ and Hg2+ in CH3CN-H2O (4:1, v/v) with off-on fluorescence and ratiometric ultraviolet-visible (UV-Vis) absorption changes. Additionally, Cu2+ is identified by opening a rhodamine spirocycle with a UV-Vis absorption band, at around 560 nm and fluorescence turn-on. Interestingly, Hg2+ is discerned by opening the rhodamine spirocycle and by generating a new special cycle for the quinoline unit. Resultantly, there were two UV-Vis absorption bands at around 365 nm and 560 nm, which were accompanied by fluorescence turn-on. Moreover, the chemosensor can quantitatively detect Cu2+ and Hg2+ by off-on fluorescence and ratiometric UV-Vis absorption changes, respectively. Furthermore, the chemosensor with low cytotoxicity could be successfully administered to monitor Cu2+ and Hg2+ in living cells. This work may pay the way for the development of dual-functional chemosensor for quantificationally detecting metal ions in environmental and biological systems.

Construction of a novel far-red fluorescence light-up probe for visualizing intracellular peroxynitrite.

Peroxynitrite (ONOO-) is an important reactive oxygen species (ROS), which can react with a variety of biologically active species and cause many diseases, such as cancer, neurodegenerative disorders. Herein, we develop a novel far-red fluorescent probe DCM-KA, which is equipping with α-ketoamide moiety caged DCM-NH2. The probe exhibits fluorescence off-on response to ONOO- over other biological interfering analytes by ONOO--induced α-ketoamide deprotection reaction. More importantly, the probe is biocompatible and has been successfully utilized to visualize endogenous ONOO- production in macrophage cell line J774A.1.

Label-free molecular probe based on G-quadruplex and strand displacement for sensitive and selective detection and naked eye discrimination of exon 2 deletion of AIMP2.

Exon 2 deletion of aminoacyl tRNA synthetase complex-interacting multifunctional protein 2 (AIMP2) is a genetic deletion related to various cancers, for instance ovarian and lung cancers. It can be worked as an indicator of cancer for diagnosis of diseases. Here, we developed a label-free method based on the formation of split G-quadruplex in the presence of target DNA combined with strand displacement to detect exon 2 deletion of AIMP2 (DE2) sensitively and selectively. This method is easy-operating and cost-saving. Moreover, it has observed discrimination of gene deletion from wild-types by naked eyes. The results demonstrate that this strategy can be further used for the detection of different gene deletions to achieve early diagnosis of diseases and allow better prognosis.

Preparation and Application of Enzyme-Nucleotide Conjugates.

In this unit the preparation and application of enzyme-nucleotide conjugates is depicted. First, a modified nucleoside triphosphate is synthesized bearing a long and flexible linker equipped with a thiol group. The nucleotide is then reacted with maleimide-activated horseradish peroxidase to yield an enzyme-nucleotide conjugate, which due to the long linker, can be used as a substrate by DNA polymerases in primer extension reactions. Finally, an assay based on these findings is described that provides a fast and easy nucleic acid detection and genotyping platform. © 2018 by John Wiley & Sons, Inc.

Visual detection of trace lead ion based on aptamer and silver staining nano-metal composite.

In this paper, visual detection of trace lead ion was established by aptamer and silver staining. The basic strategy was that aminated PS2.M aptamer was immobilized onto slide and formed stable G-quadruplex structure. PbS was generated by adding S2-, and it catalyzed subsequent silver staining reaction, through the silver staining amplification effect, the slide presented visible ash black. The gray value of slide after silver staining was analyzed and the semi-quantitative detection of Pb2+ in solution was realized. The results showed that optical darkness ratio (ODR) and logarithmic value of Pb2+ concentration had a good linear relationship (R2 = 0.951) over the range of 0.5-10 µM. In addition, there was no obvious interference of other common metal ions for the detection, indicating that this method presented outstanding selectivity. And it was also used for qualitative and semi-quantitative determination of Pb2+ in soil sample successfully.

A colorimetric and fluorescence enhancement anion probe based on coumarin compounds.

In this paper, anion probe 1 was designed and synthesized by using phenprocoumon containing acyl hydrazine with p-nitro azo salicylaldehyde reaction Dickson et al. (2008) Dickson et al. (2008) [1]. In the anion probe 1, the nitro moiety is a signaling group and the phenolic hydroxyl moiety is anion binding site. Then the anion probe 1 was characterized by mass spectra (MS) and infrared spectra (IR). The binding properties of the anion probe 1 for anions such as F(-), AcO(-), H2PO4(-), OH(-), Cl(-), Br(-) and I(-) were investigated by ultraviolet-visible (UV-Vis) spectra and fluorescence spectra Shao et al. (2008) Shao et al. (2008) [2]. Furthermore, the color of anion probe 1 after addition of F(-), AcO(-), H2PO4(-) and OH(-) in DMSO changed from yellow to blue, while no obvious color changes were observed by addition of other tested anions. Accordingly, the anion probe 1 could sense visually F(-), AcO(-), H2PO4(-) and OH(-) without resorting to any spectroscopic instrumentation Amendola et al. (2010) Amendola et al. (2010) [3].

A machine vision tool for multi-color H2O2 sensing by MoOx nanoparticles with oxygen vacancies.

Improving the ease of operation and portability of hydrogen peroxide (H2O2) detection in daily production and life holds significant application value. However, it remains a challenge to achieve rapid colorimetric detection of H2O2 and color change quantification. In this study, we achieved rapid and visual detection of H2O2 by MoOx (2 ≤ x ≤ 3) nanoparticles with rich oxygen vacancies using machine vision. As the concentration of H2O2 increases, the detection system exhibited a visible multi-color change from blue to green and then yellow and the absorption peak near 680 nm measured by the UV-visible spectrophotometer gradually decreased. With excellent sensitivity, a wide linear range of 0.1-600 µmol/L, concentrations as low as 0.1 µmol/L can be detected with good selectivity towards H2O2. The sensing mechanism of detecting H2O2 by the change of oxygen vacancies in MoOx was revealed through characterization methods such as XPS, EPR, and DFT. In addition, the Hue, Saturation, Value (HSV) visual analysis system based on MoOx was constructed to assist in the rapid, portable, and sensitive monitoring of H2O2 in practical application scenarios. This work offers an easy-to operate, low cost, and convenience for achieving rapid colorimetric determination of H2O2 and has broad application prospects in daily life and industrial production.